新倉工業 List of Products and Services

■Hydrogen gas (Group 2C) compatible type - Hydrogen gas is classified as explosion group 2C*, making it highly flammable, with the potential for explosion from even a small ignition source, necessitating appropriate safety measures. *The highest classification for explosive gases. - Compatible with gases from explosion groups 2A, 2B3, 2B, etc., other than group 2C. - The screw connection type is compatible with 2A. ■Prevention of flame escape from bidirectional external ignition sources - Prevents flame propagation during fires occurring inside and outside the plant, mitigating the risk of serious secondary disasters. - The entrance and exit are designed to prevent flame escape from both directions. - Can be installed and used in both horizontal and vertical orientations. ■Uses a clean ribbon-type flame extinguishing element - The clean ribbon (wave-structured component) consists of alternating layers of thin metal wave plates and flat plates of the same material, creating gaps determined by the gas used. ■Complies with international standard ISO16852 - Our clean ribbon-type flame arrestor is tested with the test gases specified in ISO16852. - Performance verification tests are conducted in accordance with ISO16852:2016. ■New lineup of Rc1 and Rc1/2 screw connection types - Conducted "flame extinguishing performance tests" at our in-house testing facility. - Compatible with explosion group 2A.

• Related Equipment

Would you like to reduce the amount of chemicals used during pipe cleaning (CIP cleaning) by utilizing the power of fine bubbles generated by the Shardis Mixer to adsorb, destroy, and decompose dirt? By reducing the amount of chemicals used, you can also expect a decrease in the amount of chemicals flowing into the wastewater, thereby reducing the wastewater load. We also have testing equipment available, so why not first check the effectiveness?

• others

- The Shardis mixer is an inline mixer capable of generating fine bubbles. Furthermore, it has a structure that is resistant to clogging. - This proposal is expected to reduce costs such as detergent expenses, water usage, and boiler fuel costs during pipe cleaning. How about conducting a trial before implementation? - You can consider implementation after confirming the effectiveness.

• Waste treatment facility
• Water Treatment

Introducing the sludge reduction device "NIIKURA Oni Taiji," which utilizes ozone to reduce the volume of surplus sludge generated from wastewater treatment, contributing to cost control and environmental impact reduction. <Features of "NIIKURA Oni Taiji"> ■ Ozone completely dissolves in the wastewater within the device, eliminating "waste ozone" ■ Significant reduction of surplus sludge is possible ■ Contributes to the reduction of sludge treatment costs ■ When used in conjunction with the "NIIKURA AERATION SYSTEM," surplus sludge can be reduced to nearly zero ■ Can also be used for wastewater treatment in biogas power generation and COD countermeasures *For more details, please refer to the PDF materials. If you wish to request a real machine test, please apply through the contact form.

• Water Treatment
• Waste treatment facility
• Water treatment technology and systems

We will solve the wastewater treatment issues you face in your food factory by introducing "aeration equipment." By implementing this system, the need for pressurized flotation devices is eliminated, allowing for cost reductions in floss treatment and coagulants. Even polluted wastewater that was previously discarded can be reused with advanced treatment, leading to cost savings and reduced expenses for the factory. We also have demo units available, so please feel free to contact us. 【Features】 ■ Reduces equipment maintenance and management costs ■ Odor control ■ Bulking prevention ■ Nearly maintenance-free equipment, significantly reducing labor *For more details, please refer to the PDF materials or feel free to contact us.

• Drainage and ventilation equipment
• Water Treatment Plant
• Water treatment technology and systems

Reduce excess sludge generated from wastewater treatment, contributing to cost control and environmental impact reduction. Introducing the wastewater treatment device "NIIKURA AERATION SYSTEM" and the sludge volume reduction device "NIIKURA Oni Taiji." <Features of "NIIKURA AERATION SYSTEM"> - Stabilizes wastewater by increasing dissolved oxygen in unstable wastewater, thereby reducing generated sludge. - Low environmental impact as it does not use chemicals. - Capable of reducing costs for coagulants, sludge treatment, and maintenance. - Reduces unpleasant odors from wastewater, improving the working environment. <Features of "NIIKURA Oni Taiji"> - Ozone completely dissolves in wastewater within the device, eliminating "waste ozone." - Significant reduction of excess sludge is possible. - Contributes to reducing sludge treatment costs. - When used in conjunction with the "NIIKURA AERATION SYSTEM," excess sludge can be reduced to nearly zero. *For more details, please refer to the PDF materials. If you wish to conduct a test with the actual equipment, please apply through the contact form.

• Drainage and ventilation equipment
• Water treatment technology and systems
• Water Treatment

- The Shardis Mixer has a structure that prevents clogging without any intersections, allowing for extreme simplification of daily management. - Due to the streamlining of the mixing process, it can be widely used for applications such as ozone sterilization and wastewater treatment. - It is capable of mixing liquids with significant viscosity differences, as well as slurries, gases, and liquids.

• Waste treatment facility

We will solve the wastewater treatment issues you are facing by introducing "aeration equipment." With the implementation of the system, the need for pressurized floating devices is eliminated. It is possible to reduce costs for floss treatment and coagulants. Even polluted wastewater that was previously discarded can be reused with advanced treatment, leading to cost savings and reduced expenses for the factory. We also have demo units available, so please feel free to contact us. 【Features】 ■ Reduces equipment maintenance and management costs ■ Reduces excess sludge ■ Nearly maintenance-free equipment, significantly reducing labor *For more details, please refer to the PDF materials or feel free to contact us.

• Drainage and ventilation equipment
• Water Treatment Plant
• Water treatment technology and systems

At Niikura Industrial Co., Ltd., we have been continuously developing various spray nozzles using our own technology for over 50 years. We carry out standardization, thoroughly manage manufacturing and quality control, maintain a constant stock of standard products (SUS304, ABS resin), and are equipped for immediate delivery. Our products are available in two types: ABS resin and stainless steel. 【Features】 ○ Immediate clog resolution ○ Significant weight reduction ○ Rust-resistant ○ 10,000 operational tests conducted For more details, please contact us or download the catalog.

• Water Treatment
• Garbage disposal, central dust collection, laundry, compressor

We would like to introduce the "Single Bucket Strainer" that we handle. It can be stabilized by being installed on the floor surface. It is placed before the pump or nozzle. There are "UC Type Strainer (for water)" and "SO Type Strainer (for oil)," which can filter more debris compared to Y-type or T-type, thereby reducing the frequency of cleaning. 【Features】 ■ Installed before the pump or nozzle ■ Can be stabilized by being installed on the floor surface ■ Capable of filtering more debris compared to Y-type or T-type, reducing the frequency of cleaning *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• others

We would like to introduce our "Steel Plate T-Type Strainer / Steel Plate Y-Type Strainer" that we handle. The "Steel Plate T-Type Strainer" can eliminate unnecessary piping and labor by being installed at the bends of the piping. The "Steel Plate Y-Type Strainer" is installed before pumps and nozzles, allowing for space-saving installation. 【Features】 <Steel Plate T-Type Strainer> ■ Installed before pumps and nozzles ■ Eliminates unnecessary piping and labor by being installed at the bends of the piping *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• Piping materials (copper pipes, cast iron pipes)
• others

The "FTS type" is a duplex oil strainer characterized by its unique switching mechanism (Flow Turn). With the handle switching operation to the left or right, it allows for the cleaning and replacement of the element without stopping the filtered fluid. There is no need to lift the cock, so there are no short passes. Additionally, the element can accommodate metal mesh, notch wire, and paper. 【Features】 ■ Steel dual-tube switching filter ■ Unique switching mechanism (Flow Turn) ■ Allows for cleaning and replacement of the element without stopping the filtered fluid ■ No need to lift the cock ■ No short passes *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• others

The "ST type" is an automatic strainer that can discharge and clean SS captured by the element without interrupting the flow of the line. The cleaning method is a backwashing type using a secondary fluid. As the SS increases, the flow resistance of the element rises, triggering the backwashing of the element. 【Features】 ■ The cleaning method is a backwashing type using a secondary fluid ■ Can discharge and clean SS captured by the element without interrupting the flow of the line ■ As the SS increases, the flow resistance of the element rises, triggering the backwashing of the element *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• others

The "BSW-PBA-100E Max-STRAINER" is a dedicated strainer for the printed circuit board alkaline resist stripping device. It adopts a multi-cleaning method. Due to its horizontal body shape, it excels in SS discharge performance and cleaning effectiveness. Additionally, there is no need for air bleeding operations, and the inspection of the element release point is easy. 【Features】 ■ Adopts a multi-cleaning method, providing excellent cleaning effectiveness ■ The horizontal body shape excels in SS discharge performance ■ Easy inspection of the element release point ■ No need for air bleeding operations ■ No protrusion of rotating parts *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• others

The "N10-M(A)S type" is a steel plate scraper reverse washing type strainer. As a rust prevention measure for the main body, both the inner and outer surfaces are coated with resin (polyethylene). The main body grade has been made equivalent to SUS. It can be used as a strainer for seawater intake without any issues in coastal areas. The connection flange is standard JIS10K. 【Features】 ■ Rust prevention measures for the main body include resin (polyethylene) coating on both inner and outer surfaces. ■ The main body grade has been made equivalent to SUS. ■ No issues when used in coastal areas. ■ Wedge wire element (SUS316L) is standard. ■ Connection flange is standard JIS10K. *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• others

The "N11 type" is a scraping and backwashing strainer made of steel plates, allowing for material changes according to the fluid. It standardly employs a wedge wire element (SUS316). It is designed to be suitable for industrial water and seawater. Additionally, the connection flange is standardized to JIS10K, and the SS separation (backwashing) method can be changed according to the SS of the fluid. 【Features】 ■ Made of steel plates, allowing for material changes according to the fluid ■ Standardly employs a wedge wire element (SUS316) ■ Suitable structure for industrial water and seawater ■ SS separation (backwashing) method can be changed according to the SS of the fluid ■ Connection flange is standardized to JIS10K *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• others

This product is a super wide-angle flat spray nozzle (counterweight type) that features a simple and lightweight structure, making installation easy. When the nozzle outlet is clogged, foreign objects can be easily removed by simply moving the weight part. It is suitable for watering in low-pressure areas. Additionally, it is made of engineering plastic, which has excellent corrosion resistance and is resistant to foreign object adhesion. 【Features】 - Easily remove foreign objects by simply moving the weight part when the nozzle outlet is clogged - Achieves impact suitable for foam suppression - Ideal for watering in low-pressure areas - Made of engineering plastic with excellent corrosion resistance and low adhesion of foreign objects - Simple and lightweight structure, easy to install *For more details, please refer to the PDF document or feel free to contact us.

• Sanitary fixtures
• Water and sewerage pipe fittings

This product is a micronizer (two-fluid spray nozzle) that atomizes liquid into fine particles and sprays uniform particles. The spray particle size can be adjusted by changing the mixing ratio of air and liquid. It can be used with all types of pressurized systems. It can be utilized in applications such as air conditioning and temperature control equipment for humidification, moisture control, and cooling, as well as in environmental equipment for gas cooling, desulfurization, denitrification, and dust prevention. 【Features】 ■ Atomizes liquid into fine particles and sprays uniform particles ■ Spray particle size can be changed by adjusting the mixing ratio of air and liquid ■ Usable with all types of pressurized systems ■ PSA type and PS type can also be used with suction method *For more details, please refer to the PDF document or feel free to contact us.

• Sanitary fixtures
• Waste treatment facility
• Air conditioning equipment

This product features a ball joint type that allows for fine adjustment of the spray direction of the spray nozzle. While the spray nozzle is attached, it can be fixed at any angle within a range of 25° (360° rotation) on one side. It can be used for equipment that requires fine adjustment of the spray direction or when the spray direction needs to be offset within 25° of the installation position. 【Features】 ■ Allows for fine adjustment of the spray direction of the spray nozzle ■ Can be fixed at any angle within a range of 25° (360° rotation) on one side while the spray nozzle is attached *For more details, please refer to the PDF document or feel free to contact us.

• Fittings
• Sanitary fixtures

This product is a flat spray nozzle (made of resin) that offers various performance features. It sprays water flatly due to its special outlet shape and the absence of internal blades. It has a strong impact and coarse particles. It can spray water stably across a wide range of pressure zones, and its lightweight design is also a feature. It can be offered at a low cost. 【Features】 ■ Offered at a low cost and lightweight ■ Equipped with various performance features ■ No internal blades to prevent clogging ■ Strong impact with coarse particles ■ Stable spraying across a wide range of pressure zones *For more details, please refer to the PDF document or feel free to contact us.

• Sanitary fixtures
• Waste treatment facility
• Water and sewerage pipe fittings

This product is a lightweight circular full-spray type (plastic molded) spray nozzle. It sprays water evenly across a circular area thanks to our patented internal blades. It can be offered at a low cost and comes with various performance features. It can be used in dust removal, dust prevention, exhaust gas treatment equipment, as well as in chemical etching processes, various cleaning devices, and cooling systems. 【Features】 ■ Offered at a low cost ■ Lightweight ■ Comes with various performance features ■ Sprays water evenly across a circular area due to our patented internal blades *For more details, please refer to the PDF document or feel free to contact us.

• Sanitary fixtures
• Waste treatment facility

This product is a rotating sprinkler nozzle that can be used with a small insertion hole diameter of up to 45mm in maximum outer diameter. It rotates under self-pressure and sprays water using a set of two DFNs. Since it rotates under self-pressure, no other driving mechanism is required. We also offer models for cleaning the upper, side, and lower parts, allowing for spraying water over the entire inner surface. 【Features】 ■ No other driving mechanism is required as it rotates under self-pressure ■ Usable with a small insertion hole diameter of up to 45mm in maximum outer diameter ■ Capable of spraying water over the entire inner surface ■ Models for cleaning the upper, side, and lower parts are also available *For more details, please refer to the PDF document or feel free to contact us.

• Sanitary fixtures

This product is a rotating sprinkler nozzle capable of spraying water over the entire inner surface area. It sprays water by self-pressurized rotation using a set of four EX6 type units. Since it rotates by self-pressure, no other driving devices are required. It is compact and lightweight, making it easy to handle, and can be used for cleaning various tower tanks and the inner walls of containers. 【Features】 - Compact and lightweight for easy handling - No other driving devices required due to self-pressurized rotation - Capable of spraying water over the entire inner surface area - Sprays water by self-pressurized rotation using a set of four EX6 type units *For more details, please refer to the PDF document or feel free to contact us.

• Sanitary fixtures

This product is a spray nozzle of the rotating cleaning machine type that can be used for warm water cleaning and solvent cleaning. It features a self-rotating mechanism powered by cleaning liquid pressure, allowing for high-efficiency cleaning throughout the entire tank. Since it is a low to medium pressure cleaning machine, a high-pressure pump is not required. We also offer the "JWM-40 TYPE," so please contact us if you need it. 【Features】 ■ High-efficiency cleaning throughout the entire tank ■ No high-pressure pump required as it is a low to medium pressure cleaning machine ■ Usable for warm water cleaning and solvent cleaning ■ Excellent cost performance ■ Suitable for labor-saving cleaning tasks and cleanup *For more details, please refer to the PDF document or feel free to contact us.

• Sanitary fixtures

This product is a fog jet circular full coverage spray nozzle capable of wide-area spraying. It can spray in a circular area using a combination of seven EX4 type units, allowing for a high flow rate despite the small particle size. It can be used for cooling the atmosphere in various tower tanks and containers, container cleaning, dust collection, dust removal, dust prevention equipment, and disaster prevention equipment. 【Features】 - Small particles but capable of high flow rates - Capable of wide-area spraying *For more details, please refer to the PDF document or feel free to contact us.

• Fire extinguishing equipment
• Sanitary fixtures

This product is a spray nozzle that can be used with small insertion hole diameters of 50cm and 80cm. There are models for full interior use, upper use, and lower use, allowing for wide-range watering. It can be used for cleaning the inner walls of various tower tanks and containers, as well as for chemical cleaning of the inner surfaces of reaction vessels and polymerization vessels, and for cleaning the inner walls of lining tanks. 【Features】 ■ Usable with small insertion hole diameters of 50cm and 80cm ■ Models available for full interior use, upper use, and lower use ■ Capable of wide-range watering *For more details, please refer to the PDF document or feel free to contact us.

• Fire extinguishing equipment
• Sanitary fixtures

This product is a spiral structure ring-type spray nozzle. It has no internal blades, preventing clogging. Additionally, the particles are slightly smaller than those of the "EX4 type." Our company aims to create people and products with high technology and reliable support, constantly striving for the creation of fresh technologies. 【Features】 ■ No internal blades, preventing clogging ■ Particles are slightly smaller than those of the "EX4 type" *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a small flow type of the "EX6 model," featuring a spray nozzle that distributes water flatly due to its special outlet shape. It can be disassembled into the nozzle tip, body, cap, and strainer. There are various performance nozzle tips available for both water flow rate and spray angle. It provides stable water distribution across a wide range of pressure levels. 【Features】 - Can be disassembled into the nozzle tip, body, cap, and strainer - Only the nozzle tip can be replaced - Various performance nozzle tips are available for both water flow rate and spray angle - Stable water distribution across a wide range of pressure levels *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that distributes water in an ultra-wide flat pattern due to its special outlet shape. It provides stable water distribution across a wide range of pressure levels. The impact is stronger than the "FN type." Our company aims to create people and products with high technology and reliable support, constantly striving for the creation of fresh technologies. 【Features】 ■ Stable water distribution across a wide range of pressure levels ■ Impact is stronger than the "FN type" *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that directs liquid from the nozzle orifice onto a deflector to distribute water in an ultra-wide flat pattern. Since the water is distributed by an external deflector, the impact is weaker than that of the "EX6 type," and the particles are smaller. It is suitable for watering in low-pressure areas. 【Features】 - No internal blades, preventing clogging - Water distribution is achieved through an external deflector - Weaker impact and smaller particles compared to the "EX6 type" - Ideal for watering in low-pressure areas *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a narrow-angle flat spray nozzle that provides stable spraying over a wide range of pressure. It sprays at a narrow angle of 30° at 0.2 MPa. There are no internal blades, preventing clogging. 【Features】 - No internal blades, preventing clogging - Strong impact with coarse particles - Sprays at a narrow angle of 30° at 0.2 MPa - Stable spraying over a wide range of pressure *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that disperses water in a narrow flat pattern due to its special outlet shape and the absence of internal blades. It provides stable water distribution across a wide range of pressure levels. There are no internal blades, preventing clogging. At 0.2 MPa, it sprays in a narrow flat pattern at 60°, and as the pressure increases, the angle widens. 【Features】 - No internal blades, preventing clogging - Strong impact with coarse particles - At 0.2 MPa, it sprays in a narrow flat pattern at 60°, and the angle widens as the pressure increases - Stable water distribution across a wide range of pressure levels *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that distributes water in a wide-angle flat pattern due to its special outlet shape and the absence of internal blades. At 0.2 MPa, it sprays water in a 120° wide-angle flat pattern, and as the pressure increases, the angle widens. There are no internal blades, preventing clogging. 【Features】 - No internal blades, preventing clogging - Strong impact with coarse particles - Sprays water in a 120° wide-angle flat pattern at 0.2 MPa, with the angle widening as pressure increases - Stable water distribution across a wide range of pressure *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that distributes water flatly due to its special outlet shape and the absence of internal blades. It provides stable water distribution across a wide range of pressure levels. At 0.2 MPa, it sprays water flatly at a 90° angle, and as the pressure increases, the angle widens. We offer a variety of options from low flow to high flow. 【Features】 - No internal blades, preventing clogging - Strong impact with coarse particles - At 0.2 MPa, it sprays water flatly at a 90° angle, and the angle widens as pressure increases - Stable water distribution across a wide range of pressure levels - Various options available from low flow to high flow *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that sprays water in an ultra-wide flat pattern by directing the liquid that comes out of the nozzle orifice onto a deflector. It is suitable for watering in low-pressure areas. The nozzle orifice is equipped with a backwash mechanism, allowing for normal watering even if large foreign objects enter. 【Features】 - The nozzle orifice is made of polytetrafluoroethylene, making it resistant to foreign object adhesion. - A backwash mechanism is provided in the nozzle orifice. - Normal watering can be achieved through backwash operation even if large foreign objects enter. - Watering is facilitated by an external deflector. - The impact is weaker than the "EX6 type," and the particles are coarser. - It is suitable for watering in low-pressure areas. *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that sprays a small amount of liquid using hydraulic pressure. It sprays in a ring shape due to our unique blades and internal structure. The particles are minimized as they are dispersed solely by hydraulic pressure. 【Features】 ■ Sprays a small amount of liquid using hydraulic pressure ■ Dispenses water solely by hydraulic pressure ■ Our unique blades and internal structure *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that disperses water in a wide-angle circular pattern with a spiral structure. It can be used for cleaning air, gas, etc., as well as in wastewater treatment facilities such as sludge incineration and wastewater disposal facilities. There are no blades inside, so it does not clog. 【Features】 ■ No blades inside, so it does not clog ■ Particles are slightly smaller than those of the "EX4 type" *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that distributes water evenly across a square area, thanks to our patented internal vanes and special outlet shape. It enables stable watering across a wide range of pressure levels. The impact is slightly stronger than the "EX2-SQ type." Our company aims to create people and products with high technology and reliable support, constantly striving for the creation of fresh technologies. 【Features】 ■ Stable watering across a wide range of pressure levels ■ Impact is slightly stronger than the "EX2-SQ type" *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is an EX2-SQ TYPE wide-angle square full spray nozzle suitable for watering in low-pressure areas. Thanks to our patented internal blades and special outlet shape, it sprays water over a wide-angle square area. It can be used for wastewater treatment facilities and various cleaning devices, including defoaming. 【Features】 ■ Suitable for watering in low-pressure areas ■ Impact is slightly weaker than the "EX2 type" ■ Particles are coarse *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a coreless round full spray nozzle of the EX4-HN TYPE, which has no internal blades or similar components, preventing clogging. Thanks to its unique blade-free internal structure, it sprays water evenly in a circular pattern. It has a wide operating pressure range, and while it produces coarse particles, the impact is soft. 【Features】 - No internal blades or similar components, preventing clogging - Simple structure for easy handling - Wide operating pressure range - Coarse particles but soft impact *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that evenly distributes water over a circular area thanks to our patented internal blades. It can be used for various applications, including dust removal, dust collection, exhaust gas treatment equipment, as well as cooling and absorption of smoke and exhaust gases, and various pollution prevention devices. Our company aims to create people and products with high technology and reliable support, constantly striving for the creation of fresh technologies. 【Features】 ■ Evenly distributes water over the entire area ■ Particles are slightly smaller than those of the "EX2 type" *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that distributes water evenly across a circular area using our patented internal blades. The impact is slightly stronger than the "EX2 type," and the particles are slightly smaller. We offer a variety of options ranging from low flow to high flow. It can be used for various applications such as dust removal, dust collection, exhaust gas treatment equipment, continuous casting equipment, and cooling and cleaning of steel materials and steel plates. 【Features】 ■ Uniform water distribution across the entire area ■ Impact is slightly stronger than the "EX2 type" ■ Particles are slightly smaller than the "EX2 type" ■ Various options available from low flow to high flow *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that disperses water over an ultra-wide circular area thanks to our patented internal blades. It can be used for various pollution prevention equipment, including smoke and exhaust gas cooling and absorption, as well as for degassing in seawater desalination devices. It sprays water over an ultra-wide circular area of 120° at 0.2 MPa. The angle becomes narrower in high-pressure ranges. 【Features】 - Uniformly sprays water over the entire area - Sprays water over an ultra-wide circular area of 120° at 0.2 MPa - The particles are coarse *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that distributes water over an ultra-wide circular area thanks to our patented internal blades. It sprays water over an ultra-wide circular area of 120° at 0.2MPa. The angle becomes narrower in high-pressure ranges. We offer a variety of options from low flow to high flow. 【Features】 ■ Uniform water distribution over the entire area ■ Ultra-wide circular area of 120° at 0.2MPa ■ Various options available from low flow to high flow *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings

This product is a spray nozzle that waters a wide-angle circular area thanks to our patented internal blades. It waters a 90° wide-angle circular area at 0.2MPa. The angle becomes narrower in high-pressure ranges. We aim to create people and products with high technology and reliable support, constantly striving for the creation of fresh technologies. 【Features】 ■ Uniform watering across the entire area ■ Waters a 90° wide-angle circular area at 0.2MPa ■ Particles are coarse *For more details, please refer to the PDF document or feel free to contact us.

• Water and sewerage pipe fittings