住友大阪セメント List of Products and Services

It forms a highly transparent urethane-based coating that visualizes the deterioration of concrete and prevents the spalling of concrete fragments.

• Bridge Materials

Please take a look at the catalog.

• Plastering accessories

This is an injection-type inorganic anchor using a cartridge container. There are two types of construction methods: one involves injecting the anchor material and then inserting the anchor rod, and the other involves inserting the anchor rod and injecting the anchor material through the injection pipe. It is ideal for installing thin anchors with a diameter of 10 mm or less, as the drilling diameter is small and easy to insert.

• Earthquake-proof and vibration-damping equipment

This is an injection milk material for semi-flexible pavement, developed by adding a re-emulsifying powder polymer created through our long-established blending technology. By simply mixing it with water, it exhibits high permeability and stable strength and durability, enabling high-quality construction.

• grout

There are various issues such as unit water volume, aggregates, and on-site measurement in the field mixing of high-strength concrete. To solve all these problems at once, the "Jet Pack" is a pre-measured pack that contains all the materials used, carefully selected and weighed.

• Ready-mix concrete

【Features】 ○ Achieves practical strength in 3 hours Achieves practical strength in about 3 hours. ○ Long-term stable strength enhancement Similar to Portland cement, stable strength enhancement can be obtained over a long period. ○ Adjustable working time By dissolving the setting retarder "Jet Setter" in the mixing water beforehand, it is possible to adjust the working time.

• cement

The Refremo Set SP (for floor slabs) is a fast-setting, high-durability repair material designed for RC floor slab repairs, with an estimated construction time of approximately 36 hours.

• Mortar and plaster materials
• Premixed mortar
• Plastering and painting work

Refregraut AD is a special cement-based grout material developed for formwork injection during the cross-section repair of concrete structures in water supply facilities.

• Mortar and plaster materials
• Premixed mortar
• Plastering and painting work

●Easy air mortar that only requires mixing with water ●Ideal for small localized voids and shortening construction time! ●Fast-setting for early traffic opening! ●High quality and excellent mobility with premix! ●Lightweight, making it less likely to sink even on soft ground.

• Mortar and plaster materials
• Premixed mortar
• Plastering and painting work

Filcon R-F is an extremely low-shrinkage, crack-resistant product that maintains various performance requirements for non-shrink mortar while incorporating pre-mixed nylon fibers. Although it contains pre-mixed nylon fibers, it demonstrates fluidity equivalent to that of conventional non-shrink mortars. Additionally, its strength properties, such as compressive strength, are equal to or greater than those of traditional non-shrink mortars.

• Mortar and plaster materials
• Premixed mortar
• Plastering and painting work

The Refle Sentinel is a sacrificial anode material that utilizes the difference in ionization tendency between high-quality zinc and rebar, which is wrapped in special mortar, to supply corrosion-inhibiting current to the rebar and suppress corrosion. Additionally, its unique V-shaped cut design allows for easy and precise installation on various types of rebar.

• Bridge Materials

The low-carbon Filcon TF is a non-shrink mortar that incorporates latent hydraulic materials with extremely low CO2 emissions during production into a portion of the raw cement, achieving a 32% reduction in overall CO2 emissions compared to conventional materials from our company. It can be proposed as a CO2 reduction measure in technical proposals for comprehensive evaluation systems, such as environmentally considerate design for structures (CASBEE). Our material technology is utilized, allowing for a reduction in CO2 emissions while maintaining nearly the same physical performance as conventional products.

• Mortar and plaster materials
• Premixed mortar
• Plastering and painting work

This is a fiber-reinforced ultra-rapid hardening polymer cement mortar for partial repair of bridge deck concrete, enhanced with high-performance special powder resin and special fibers.

• Mortar and plaster materials
• Premixed mortar
• Plastering and painting work

Inorganic injection anchors, such as Semiforce anchors, fully exhibit the characteristics of inorganic materials, including behavior and fire resistance. They possess adhesion strength equivalent to traditional adhesive anchors and can be used in various construction environments, including dry, wet, and underwater conditions. For more details, please contact us or refer to the catalog.

• Reinforcement and repair materials

It is a non-shrink mortar that develops practical strength within a few days. It has excellent fluidity and can fill complex-shaped voids thoroughly.

• Premixed mortar
• Plastering and painting work
• grout

Filcon TF is a non-shrink mortar with hydration heat suppression. It is ideal for pouring large member cross-sections where temperature stress cracking due to hydration heat of cement is a concern, as well as for pouring in hot weather.

• Premixed mortar
• Plastering and painting work

It is a high-speed, rigid, non-shrink mortar that develops strength within hours, making it ideal for urgent construction under time constraints or while traffic is open. Additionally, long-term strength is also consistently achieved.

• Premixed mortar
• Plastering and painting work
• grout

This is a mobile plant equipped with a continuous mixing mixer. It can handle both small and large pours, and allows for weight management through computer control. For more details, please contact us or refer to the catalog.

• Ready-mix concrete

High-speed hard cement JET-CEMENT achieves practical strength in 3 hours, provides stable strength enhancement over the long term, and allows for flexible adjustment of setting time. For more details, please contact us or refer to the catalog.

• cement

High-speed hard cement, Mild Jet Cement offers excellent strength development, outstanding workability, and surface finish. The curing time is one hour, allowing for ample construction time. For more details, please contact us or refer to the catalog.

• cement
• Ready-mix concrete
• Concrete Machinery

The jet pack for fast-setting rigid concrete has a mixing volume of approximately 25 liters per set. It achieves a strength of over 24 N/mm² in 3 hours, eliminating the hassle of measuring and ensuring stable quality. For more details, please contact us or refer to the catalog.

• Ready-mix concrete
• Gutters and U-shaped gutters
• Water Supply Facilities

Water-stopping and repair filling material, Lion Shisui, does not contain harmful components, making it suitable for water-stopping work, joining and leak repair of concrete water supply and drainage materials, as well as for temporary fixing in stonework in construction, among other wide-ranging applications. For more details, please contact us or refer to the catalog.

• Ready-mix concrete
• Bridge Construction
• Water Supply Facilities

The concrete curing agent Sumisei SC is an ideal membrane curing agent for improving the finish and durability of concrete surfaces. It demonstrates excellent effects for initial curing simply by being applied immediately after concrete placement. For more details, please contact us or refer to the catalog.

• Ready-mix concrete
• Concrete curing material

Ultra-fast hardening non-shrink mortar NEW Filcon M is an ultra-fast hardening non-shrink mortar that achieves practical strength in a short time. It has excellent fluidity, allowing it to reach narrow spaces and fill them reliably. Since there is no bleeding at all, there is no worry about leaving voids after filling. For more details, please contact us or refer to the catalog.

• Premixed mortar
• Manhole body
• Plastering and painting work

High fluidity non-separating mortar Filcon 300W has low suspension in seawater and river water, allowing for grouting work of uniform quality. It excels in pumpability and self-leveling properties. For more details, please contact us or refer to the catalog.

• Premixed mortar
• Plastering and painting work
• grout

Non-shrink mortar for pads, Filcon Pad, excels in moldability and enables rapid pad placement in machine installation work and the installation of steel column foundation bases. By mixing within the specified water range, it maintains stable non-shrink properties. For more details, please contact us or refer to the catalog.

• Mortar and plaster materials
• Premixed mortar
• Plastering and painting work

Super fast hardening high strength non-shrink mortar Filcon H is a super fast hardening high strength non-shrink grout material that exceeds 40 N/mm² within 2 to 6 hours after placement. It is ideal for emergency construction under time constraints or while allowing traffic to pass. Long-term strength is also consistently achieved. For more details, please contact us or refer to the catalog.

• Premixed mortar
• Plastering and painting work
• grout

Half-flexible pavement injection material New Fun Coat can produce a high fluidity, high strength half-flexible pavement injection milk simply by mixing with water. It excels in injectability at high temperatures, improving construction capabilities. For more details, please contact us or refer to the catalog.

• Exterior and paving materials <General>

The high-speed hard track injection material, ballast packer, is a grout material used to fill the ballast of railway tracks. It develops strength in a short time and has excellent filling properties. For more details, please contact us or refer to the catalog.

• Ready-mix concrete
• Road construction
• grout

Polymer cement-based section repair material Lion GRLC is a polymer cement mortar with fiberglass, based on ultra-fast hardening cement. It complies with the quality standards for section repair materials set by the former Japan Highway Public Corporation. For more details, please contact us or refer to the catalog.

• Ready-mix concrete
• Reinforcement and repair materials
• Dam construction

The ultra-fast hard lightweight sectional repair material, Lion GRLC-J, is primarily composed of a special inorganic material based on ultra-fast hard cement, and is a lightweight polymer cement mortar that includes high-performance special powdered resin and special short fibers pre-mixed. For more details, please contact us or refer to the catalog.

• Ready-mix concrete
• Reinforcement and repair materials

Polymer cement-based cross-section repair material, Refremolset SP, is a polymer cement-based concrete cross-section repair material that is pre-mixed with high-performance special powdered resin and special short fibers. It features easy mixing work, excellent workability, and high crack resistance. For more details, please contact us or refer to the catalog.

• Premixed mortar
• Plastering and painting work

Acid-resistant mortar Refleark L is a repair material specifically designed for corroded concrete in sewer facilities that are showing signs of deterioration. It offers excellent acid resistance, is suitable for trowel application, and can also be applied by spraying. For more details, please contact us or refer to the catalog.

• Premixed mortar
• Water Supply Facilities
• Plastering and painting work

The ultra-fast hardening repair material, Refremol Set M, is a polymer cement mortar primarily composed of a special inorganic material based on ultra-fast hardening cement, pre-mixed with high-performance special powdered resin and special short fibers. It achieves practical strength in a short time. With excellent adhesion, outstanding durability, and underwater stability, it is easy to work with. For more details, please contact us or refer to the catalog.

• Premixed mortar
• Plastering and painting work

Concrete cross-section repair material NEW Refremol Set is a lightweight polymer cement mortar containing fiberglass, based on ultra-rapid hardening cement. Due to the special rapid-hardening cement as the main raw material, practical strength can be achieved in a short time. It has low shrinkage and excellent adhesion. For more details, please contact us or refer to the catalog.

• Mortar and plaster materials
• Premixed mortar
• Plastering and painting work

Polymer cement-based rebar rust prevention α rust prevention paste is a rust prevention material for rebar that has corroded due to carbonation and salt damage. By mixing the "α rust prevention paste powder," which is a re-emulsified powdered resin, with a lithium nitrite aqueous solution "Refre α" and a specified amount of water, a polymer cement-based rust prevention material with high rust resistance can be obtained. Please apply it to the surface of the rebar and the underlying concrete using a brush or a spray gun. For more details, please contact us or refer to the catalog.

• Reinforcement and repair materials
• Dam construction
• Road construction

Concrete substrate primer Refletreat stabilizes the adhesion of mortar and allows for a follow-up application method. It has excellent water absorption prevention effects. For more details, please contact us or refer to the catalog.

• Plastering base material
• Premixed mortar
• Plastering and painting work

Epoxy resin adhesive for wet concrete surfaces, Refletuff Bond, exhibits excellent adhesion to concrete and steel materials. It demonstrates outstanding adhesion even on wet concrete surfaces. It can be applied using brushes, rollers, etc., making it highly workable. For more details, please contact us or refer to the catalog.

• glue
• Reinforcement and repair materials
• Plastering and painting work

The high polymer polymer emulsion sealer Lion Bond A can be used as a primer for mortar and can also be used as a thin-layer mortar by mixing it with cement and silica sand. For more details, please contact us or refer to the catalog.

• Mortar and plaster materials
• Reinforcement and repair materials
• Plastering and painting work

It is a salt damage inhibitor and an alkali-silica reaction suppressor. Refre α40 suppresses rebar corrosion due to salt damage, rebar corrosion due to carbonation, and alkali-aggregate reactions, keeping the concrete in a sound condition. For more details, please contact us or refer to the catalog.

• Premixed mortar
• Reinforcement and repair materials
• Plastering and painting work

Inorganic high-elasticity concrete protective coating Rexcoat 1000 is an inorganic high-elasticity coating material that possesses excellent waterproofing, salt-blocking, and carbonation inhibition properties. It is a concrete protective coating material that prevents the intrusion of harmful rainwater, carbon dioxide, and chloride ions into the concrete. For more details, please contact us or refer to the catalog.

• Reinforcement and repair materials
• Waterproofing work

Inorganic high-elasticity concrete protective coating, Rexcoat 5100, is a concrete protective coating material that prevents the intrusion of harmful rainwater, carbon dioxide, and chloride ions from the outside, possessing excellent waterproofing, salt resistance, and carbonation inhibition properties. For more details, please contact us or refer to the catalog.

• Reinforcement and repair materials
• Dam construction
• Waterproofing work

The polymer cement-based leveling material "Refleve Base Putty" strongly adheres to the substrate due to its polymer cement composition. It has excellent waterproofing properties. It is ideal for surface preparation for painting and for thin concrete repairs. For more details, please download the catalog.

• Reinforcement and repair materials

The concrete penetrating modifier "Refrepaset D70" is an inorganic concrete penetrating modifier. This product can prevent the internal intrusion of concrete deterioration factors such as carbon dioxide and chloride ions, thereby improving the durability of concrete.

• Reinforcement and repair materials

Foundation finishing material for the top surface, Lion High Flow for the top surface, is a cement-based self-leveling mortar that achieves a smooth finish simply by pouring it onto the top surface of residential foundation concrete. You can achieve a smooth foundation top finish just by pouring it to match the level. For more details, please contact us or refer to the catalog.

• Mortar and plaster materials
• Premixed mortar
• Plastering and painting work