サイシュウテクノ List of Products and Services

The high-performance "heat-shielding sheet" is a heat insulation material that cuts 99% of radiant heat, which cannot be prevented by insulation alone. By using it on the roofs and walls of large spaces such as factories, it is possible to suppress the temperature rise of buildings caused by the radiant heat of the summer sun and lower the perceived temperature. We will select sheets according to the application, such as under roofs, in ceilings, on interior and exterior walls, for mechanical equipment, ducts, and condensation prevention. [Case Study: Miki City, Hyogo Prefecture] ■ Consultation Details Air conditioning equipment is installed inside the building, but it is not very effective. We received an inquiry asking if there is anything we can do for the employees' heatstroke prevention. ■ Challenges The interior of the building is spacious, and it was possible for high-altitude work vehicles to enter for the installation. For areas where work with high-altitude vehicles was difficult, we set up scaffolding to ensure safe and careful installation. ■ About the Effect To confirm the effectiveness after installation, measurements were taken using a thermal imaging camera. The uninstalled area measured 39.1°C, while the installed area measured 22.9°C, showing a maximum temperature difference of 16.2°C. * The airflow and other numerical values or comparison values are based on our measurement standards and may vary due to voltage and other conditions. * For more details, please contact us.

• Heat shielding sheet
• Heat insulation and heat shielding methods

The "Strong Cool V" is a large cooler (large air conditioner) that reduces heat discharge with its unique technology. It comes with 100mm casters, making it easy to move. It offers both strong cooling mode and weak cooling mode, with mode switching possible. In strong cooling mode, it operates with hybrid functionality for high cooling capacity, while the weak cooling mode utilizes IDEC cooling to further reduce power consumption during light loads, especially effective in low humidity operation. The hybrid cooling method, which uses water from the tap for evaporative heat exchange and a heat pump, achieves an impressive COP of 7.65/7.53! With a large-capacity water tank, it can operate for 8 hours without water supply, and the 100mm casters allow for easy movement. 【Features】 ■ 5-stage airflow adjustment for precise control ■ Large airflow of 3100m3/h ■ Dry strong cold air with room temperature of -8℃ to -10℃ ■ Unique technology to reduce heat discharge ■ IDEC cooling is particularly effective in low humidity operation ■ Cold air reach distance of approximately 15m * The airflow and other numerical values or comparison values are based on our measurement standards and may vary depending on voltage and other conditions. * For more details, please feel free to contact us.

• Cooling system

The battery-connected air conditioner "Strong Cool Plus" is designed for golf carts and is compatible with 12V, 24V, 48V, and 72V batteries. It can lower the surface temperature by a maximum of -5 to 10℃ within a few minutes of operation. It can be installed in any vehicle with a battery power source, and the cool breeze fan cools the outside air and delivers a large volume of airflow. Since it can be installed in vehicles with a battery power source, it can be introduced into forklifts, construction machinery, guard boxes, temporary toilets, temporary houses, campers, and even construction machinery where air conditioning is typically not installed. 【Features】 ■ Highly effective for work in extreme heat ■ Compatible with 12V, 24V, 48V, and 72V batteries ■ Installable in vehicles with a battery power source ■ Cool breeze fan: cools outside air and delivers a large volume of airflow ■ Easy maintenance and reduced running costs *The airflow and other numerical values or comparison values are based on measurements conducted according to our company's measurement standards and may vary depending on voltage and other conditions. *For more details, please refer to the related links or feel free to contact us.

• Air conditioning

The battery-connected air conditioner "Strong Cool Plus" is designed for construction machinery and is compatible with 12V, 24V, 48V, and 72V batteries. It can be installed in vehicles equipped with a battery power source, and the cool air fan cools the outside air and delivers a large volume of airflow. It can lower the surface temperature by up to -5 to 10°C within a few minutes of starting operation, making it suitable for construction machinery where traditional air conditioning cannot be installed. Since it can be installed in vehicles with a battery power source, it can be mounted in various locations such as forklifts, guardman boxes, portable toilets, temporary houses, and camper vans. 【Features】 ■ Highly effective for work in extreme heat ■ Compatible with 12V, 24V, 48V, and 72V batteries ■ Installable in vehicles with a battery power source ■ Cool air fan: cools outside air and delivers a large volume of airflow ■ Easy maintenance and reduced running costs *The airflow and other numerical values or comparison values are based on measurements conducted according to our company's measurement standards and may vary depending on voltage and other conditions. *For more details, please refer to the related links or feel free to contact us.

• Air conditioning

The battery-connected air conditioner "Strong Cool Plus" is designed for forklifts and is compatible with 12V, 24V, 48V, and 72V batteries. It can be installed in vehicles with a battery power source, and the cool breeze fan cools the outside air and delivers a large volume of airflow. The main power sources are just the fan motor and pump, making it energy-efficient compared to traditional air conditioners. Maintenance is also easy, reducing running costs. Since it can be installed in vehicles with a battery power source, it can be mounted in various locations such as construction machinery, guard boxes, temporary toilets, temporary houses, and camper vans. 【Features】 - Great for working in extreme heat - Compatible with 12V, 24V, 48V, and 72V batteries - Can be installed in vehicles with a battery power source - Cool breeze fan: cools outside air and delivers a large volume of airflow - Easy maintenance and reduced running costs *The airflow and other numerical values or comparison values are based on measurements conducted according to our measurement standards and may vary depending on voltage and other conditions. *For more details, please refer to the related links or feel free to contact us.

• Air conditioning

The "heat-shielding sheet" is a heat-insulating material that cuts 99% of radiant heat, which cannot be prevented by insulation alone. By using it on the roofs and walls of large spaces such as factories, it is possible to suppress the temperature rise of buildings caused by the radiant heat of the summer sun and lower the perceived temperature. It also has a significant effect on reducing the building's utility costs. We will select the sheet according to the application, such as under roofs, in ceilings, on interior and exterior walls, for machinery, ducts, and condensation prevention. 【Features】 ■ Maximum 97% reflection with just 0.23mm thickness ■ Cuts 99% of radiant heat that cannot be prevented by insulation alone ■ Used on roofs and walls of large spaces such as factories ■ Suppresses temperature rise in buildings and lowers perceived temperature ■ Significant effect on reducing building utility costs *The airflow and other numerical values or comparison values are based on measurements conducted according to our company's measurement standards and may vary depending on voltage and other conditions. *For more details, please feel free to contact us.

• Heat shielding sheet

"Strong Cool Plus" is a battery-connected air conditioner compatible with 12V, 24V, 48V, and 72V batteries. It can be installed in vehicles equipped with a battery power source, and the cool wind fan cools the outside air and delivers a large volume of airflow. 【Features】 ■ Highly effective for work in extreme heat ■ Compatible with 12V, 24V, 48V, and 72V batteries ■ Can be installed in vehicles with a battery power source *The airflow and other numerical values or comparison values are based on measurements conducted according to our measurement standards and may vary depending on voltage and other conditions. *For more details, please refer to the related links or feel free to contact us.

• Cooling system

The "Strong Cool V" is a large cooler that reduces heat exhaust with its unique technology. In strong cooling mode, it operates with hybrid performance for high cooling capacity. In weak cooling mode, the IDEC cooling further reduces power consumption during light load conditions. It features a large-capacity water tank that allows for 8 hours of operation without water supply, and it can be easily moved with 100mm casters. 【Features】 ■ Usable with a 100V outlet ■ Large airflow of 3100m3/h ■ Dry strong cold air with room temperature of -8℃ to -10℃ ■ Reduces heat exhaust with unique technology ■ IDEC cooling is particularly effective in low humidity operation ■ Cold air reach distance of approximately 15m * The airflow and other values or comparison values are based on measurements conducted according to our company's measurement standards and may vary depending on voltage and other conditions. * For more details, please feel free to contact us.

• Cooling system

In hot seasons, measures against heatstroke are essential. Although the cosmetics manufacturer we consulted with already had air conditioning equipment installed in their building, it was not very effective in combating the heat. To help protect employees from heatstroke, we proposed the installation of heat-shielding sheets. [Background Leading to Implementation] - A site survey was conducted the previous year, and construction was carried out after sufficient discussions. - The interior of the building is spacious, and since it was possible to bring in high-altitude work vehicles for the construction, we received cooperation in moving materials within the construction space by setting up scaffolding. [Implementation Effects] To confirm the effects after construction, measurements were taken using a thermal camera (main image). Unconstructed area: 39.1°C, constructed area: 22.9°C A temperature difference of up to 16.2°C was measured. The heat-shielding sheets not only suppress the rise in temperature but also keep the initial costs low. They help maintain a cool environment in summer and a warm one in winter, significantly reducing the annual running costs of the existing air conditioning equipment, which was also a point of satisfaction. *For more details, please download the materials or contact us directly.

• Heating and cooling equipment and facilities
• Heat shielding sheet
• Heat-shielding materials

In indoor work during the summer, measures against heatstroke and heat insulation are necessary. This time, we received a consultation from a customer who develops and processes high polymer functional products, seeking to address the heat issues of handrails that have been problematic during the summer. 【Problem】 Construction was carried out on weekends, outside of factory operating days, as it is an area for workers to pass through. Proper protection was necessary to ensure that paint did not drip from the handrails onto the stairs. 【Process and Changes Leading to Implementation】 Playground equipment in parks can become hot enough to cause burns during the summer, so we proposed a paint that is also used on playground equipment to ensure children can play safely. This paint has the property of "dissipating heat" and has been proven to be safe and effective. 【Processing Process and Changes】 The installation of the stair handrails was carried out on holidays when there were no workers passing through. *For more details, please download the materials or contact us directly.

• Heating and cooling equipment and facilities
• Heat shielding sheet
• Heat-shielding materials

In indoor work during the summer, measures against heatstroke and heat insulation are necessary. This time, we received a consultation from a customer who develops and processes polymer functional products, seeking to implement heat countermeasures in their manufacturing warehouse. 【Problem】 Last year, we installed heat insulation sheets on similar shutters at the same factory, and we were considering a similar proposal this time. However, due to the shutters being of the roll-up box type and needing to be opened and closed several times a year, installation of sheets was not feasible. 【Process Leading to Implementation】 When rust is observed on the shutters, we use paint specifically designed for rust prevention. However, since no rust was found this time, we selected a revolutionary paint that "eliminates heat" rather than just "insulating against heat." 【Construction】 The shutters were painted on weekdays, and we took great care in preparing the surface to ensure a clean application. We applied three coats: rust prevention, primer, and topcoat. *For more details, please download the materials or contact us directly.*

• Heating and cooling equipment and facilities
• Heat shielding sheet
• Heat-shielding materials

"Strong Cool" is a portable evaporative cooling device that has previously been used in factories, gymnasiums, and event venues. We have now developed a new product as a battery-connected air conditioner to support field workers, such as those operating construction machinery and temporary toilets! 【Features】 1. Powerful cooling down to -10℃! Great for working in extreme heat! It can reduce surface temperatures by up to -5 to -10℃ within minutes of starting operation. 2. Can be installed on vehicles with a battery power source Compatible with a wide range of battery capacities (12V, 24V, 48V, 72V). 3. Can be introduced to construction machinery where permanent air conditioning is usually not possible! *Continuous operation should be limited to within 60 minutes, and please regularly check the forklift's battery level, battery fluid, and connection status while in use. *For more details, please visit the external site or feel free to contact us.

• Heating and cooling equipment and facilities

This is a powerful portable spot air conditioner. It has been made possible by integrating the indoor and outdoor units into a frame with casters. 【Q&A】 1. Is electrical work necessary? A voltage of 30A or more is required per unit. If the capacity is insufficient, construction will be necessary. 2. What about heat discharge? It discharges heat as it performs heat exchange. 3. What about drainage? During cooling, drainage occurs from the indoor unit, and during heating, from the outdoor unit. A drain tank is not included, so drainage must be secured. 4. How effective is it? During cooling, it provides cool air at -10°C to -13°C below room temperature, and during heating, warm air at +10°C above room temperature. 5. Is maintenance required? It is filterless, so everything except the remote control can be washed with water. ...If you have any other questions, please feel free to check the external site or contact us!

• Ventilation and smoke exhaust equipment
• Ventilation system

A vapor-type cooling fan takes heat from the surrounding area when water evaporates, sending out the cooled air in large volumes through a large fan. It is equipped with casters, making it easy to move, and can be used anywhere that is not exposed to rain. 【Q&A】 1. What is the power supply? Single-phase 100V. It can be used with a household outlet. However, it is limited to one unit per breaker. It cannot be used with multi-outlet adapters, extension cords, or generators. 2. How effective is it? It blows air that is 3°C to 8°C cooler than the surrounding temperature. (There may be variations depending on usage conditions and humidity.) 3. How do I supply water? You can either fill the tank manually or connect a hose to the water inlet for automatic water supply. Additionally, it has casters, allowing for easy movement after filling, even if there is no water source nearby. 4. Is maintenance required? Regular cleaning is necessary. Please follow the instructions in the user manual. 5. Is there a demonstration? We conduct demonstrations where you can experience the effect with the actual unit (excluding some regions). ...If you have any other questions, please feel free to check external sites or contact us!

• Ventilation and smoke exhaust equipment
• Ventilation system

We propose a "Cool Breeze Plan" tailored to each space by combining rooftop exhaust fans and evaporative coolers. 【For those who have the following concerns!】 ■ Worrying about heatstroke throughout the year in a hot factory ■ Weak air conditioning in a large building ■ Significant increase in the number of workers during busy periods ■ Poor work efficiency due to a hot workplace ■ Unsatisfied with the effectiveness of any heatstroke measures taken so far 【Features】 ■ Outstanding cost performance ■ Heatstroke prevention and improvement of work environment ■ Energy-saving measures ■ Reduction of CO2 emissions to prevent global warming *For more details, please visit the external site or feel free to contact us.

• Ventilation and smoke exhaust equipment
• Ventilation system

Factory air conditioning equipment cools the entire factory by expelling heat through ventilation fans like roof fans and cooling with air conditioners or evaporative coolers. 【Advantages】 - More efficient cooling than installing air conditioning units Equipping air conditioning systems tailored to the specific tasks in offices, clean rooms, and production lines is one effective method. - Reduces stress during work Many factory air conditioning systems are installed in the ceiling area. 【Disadvantages】 - Costs can increase significantly depending on the scale of the installation work. With Saishu Techno Co., Ltd.'s "Cool Breeze Plan," space cooling can be achieved with a combination of energy-saving ventilation fans and evaporative coolers, helping to keep costs down. Moreover, it does not require large equipment or dedicated machinery rooms, making it popular for installation anywhere. *For more details, please refer to the external site or feel free to contact us.

• Ventilation and smoke exhaust equipment
• Ventilation system

The commercial large evaporative cooler is characterized by its ability to send cool air that is lower than room temperature by utilizing evaporative cooling. 【Advantages】 ■ Easy to introduce and move due to the presence of casters, no installation required ■ Low running costs ■ Comfortable for work 【Disadvantages】 ■ The hassle of refilling water every time it runs low When used continuously, it depends on the capacity of the water tank, so caution is needed for long hours of operation. It is recommended to regularly maintain the water tank since it will always need to be filled with water. ■ Requires a certain amount of space for installation The cooling effect may decrease in high humidity areas. *For more details, please refer to the external site or feel free to contact us.

• Ventilation and smoke exhaust equipment
• Ventilation system

It is difficult to implement heat countermeasures while avoiding foreign material contamination. This time, we received an inquiry about heat countermeasures for the entire factory from a powder processing manufacturer. 【Current Issues】 - Since we handle powders and need to avoid contamination of product raw materials, we cannot install cooling devices like air coolers inside the building. - Due to the proximity to the sea, outdoor equipment requires measures against salt damage. - The entire building has not been insulated. 【Proposed Solutions】 - The interior is in a state where powder is swirling due to manufacturing. First, we calculated the necessary ventilation frequency for the existing roof fans to review the ventilation system, and it was found that the ventilation volume is insufficient, so we propose replacement and expansion. *For more details, please download the materials or contact us directly.

• Ventilation and smoke exhaust equipment
• Heat shielding sheet

In indoor work during the summer, measures against heatstroke and heat insulation are necessary. This time, we received an inquiry from a manufacturer of high polymer functional products with a two-story building. They have air conditioning and ventilation systems but wish to implement heat insulation measures while maintaining the role of the glass against heat coming through the window. [Challenges before construction] - A high-altitude work vehicle is required for construction on the upper part of the second-floor wall. - Equipment selection must be done in sizes that fit in the elevator for transport. - In some construction locations, work will require more than three people, so a rolling tower will also be used. [Process leading to implementation] - We proposed a product and construction method that allows for the installation of heat insulation sheets from the inside, which can be expected to be effective semi-permanently without being affected by external rain or wind. - For the window surface, we selected "Eco Glass Coat," which allows bright light while significantly cutting heat rays (approximately 70% near-infrared and about 90% ultraviolet cut) to achieve heat insulation effects. *For more details, please download the materials or contact us directly.

• Heating and cooling equipment and facilities
• Heat shielding sheet
• Heat-shielding materials

In hot seasons, measures against heatstroke are essential. Although the cosmetics manufacturer we consulted with already had air conditioning equipment installed in their building, it was not very effective in combating the heat. To help protect employees from heatstroke, we proposed the installation of heat-shielding sheets. [Background to the Implementation] - A site survey was conducted the previous year, and the installation was carried out after sufficient discussions. - The interior of the building is spacious, allowing for the entry and exit of high-altitude work vehicles during the installation, so we received cooperation in moving materials within the construction space. [Effects of Implementation] To confirm the effects after installation, measurements were taken using a thermal camera (main image). Uninstalled area: 39.1°C, Installed area: 22.9°C A maximum temperature difference of 16.2°C was measured. The heat-shielding sheets not only suppress the rise in temperature but also keep installation costs down, providing a comfortable environment in summer and warmth in winter, which significantly reduces the annual running costs of the existing air conditioning equipment, leading to customer satisfaction. *For more details, please download the materials or contact us directly.

• Heating and cooling equipment and facilities
• Heat shielding sheet
• Heat-shielding materials

We would like to introduce the hot air heaters from Shizuoka Seiki Co., Ltd., specifically the 'HOTGUN series' that we handle. We offer a wide range of products, including the compact yet high-power "HG50D," the "HGCJII" which can blow air up to 100 meters, and the standard type "HGMAXDIII" that is versatile for various applications. You can choose the product that best fits your needs. 【Product Lineup】 ■HOTGUN HG125NII ■HOTGUN HG30RS ■HOTGUN HG50D ■HOTGUN HGCJII ■HOTGUN HGDHII ■HOTGUN HGMAXDIII ■HOTGUN HGNX *For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities

The "VAL6 Series" is an infrared heater with a built-in circulator. Starting with the compact yet powerful "VAL6 PKII," we offer a variety of models including the robust "VAL6 KBS" designed for heavy use, and the space-saving slim design "VAL6 miniF1," among many others. You can choose the product that best suits your needs. 【Product Lineup】 ■ VAL6 PKII ■ VAL6 SR ■ VAL6 SY ■ VAL6 KBS ■ VAL6 miniF1 ■ VAL6 PH *For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities

The "Hokatto Series" is an infrared heater that reduces kerosene usage by 10% while maintaining the same warmth compared to the conventional "SE Series." It allows for easy operation of strength settings and timer functions. The off-timer can be set for 10, 15, 20, 30, 60, 120, 240, or 480 minutes. When extinguishing, it instantly returns the kerosene in the pipes back to the tank, reducing unpleasant odors during shutdown. 【Features】 ■ Reduction in kerosene usage ■ Easy-to-read and easy-to-use control panel ■ Equipped with an instant deodorization system ■ Temperature distribution ■ Front protected with a flocked coating (only for SE150α and SE200α) *For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities

The "Sun Stove SSN5" is an infrared heater that ignites in about 8 seconds with the push of a switch, providing immediate warmth. It can be used without waiting even during short breaks when you want to get warm quickly. At maximum combustion, it operates at a quiet 48 decibels, comparable to a quiet office, making it safe to use in customer service areas. 【Features】 ■ 360-degree warmth ■ Quick ignition ■ Improved energy efficiency with eco mode ■ Top-class quietness ■ Safety key included (anti-tampering feature) *For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities

We interviewed "Hanamata," a flower shop in Toyonaka City, Osaka Prefecture, which has introduced the spot cooler "Pure Drive" that does not emit exhaust heat. Since there is no air conditioning installed in the warehouse, they opted for this easy-to-use and compact unit. During the summer, the warehouse gets very hot, making it difficult to work, and the heat can damage the flowers. They expressed that the introduction of this unit has been a great help. After considering other products, they appreciated the fact that it does not emit exhaust heat. The mobility provided by the casters is also convenient and well-received. **Features of "Pure Drive":** - No exhaust heat - Powerful cool air - Energy-efficient - Free of CFCs - No drainage required *For more details, please refer to the PDF document or feel free to contact us.*

• Air conditioning equipment

We have introduced one unit of the "Hyper Strong Cool (Combo Type)" to the alloy iron factory in Anan City, Tokushima Prefecture. The "Combo Type" features both the indoor and outdoor units installed on a caster-equipped frame, making it easy to move. It can be relocated according to the work area, allowing for targeted cool air delivery to workers, eliminating concerns about decreased work efficiency due to heat. We offer rental and sales. Please feel free to contact us. *The airflow and other numerical values or comparison values are based on measurements conducted according to our company's measurement standards and may vary depending on voltage and other conditions. *For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities

In the automotive sheet metal and painting factory, three rooftop ventilators, known as "roof fans," were installed; however, the required ventilation frequency for the building was insufficient. As a result, a review of measures against heatstroke for workers and the working environment was being considered. To address the lack of ventilation frequency, we proposed replacement work to increase the capacity of the existing "roof fans." There was no need for new installations, and by enhancing the capacity of the existing units, the necessary ventilation frequency was achieved. Additionally, we conducted a detailed installation simulation for a high-capacity spot air conditioner, "Hyper Strong Cool," to ensure it would not affect the painting process, allowing us to select an appropriate installation location for its introduction. By combining the ventilators and the cooling unit, we were able to create airflow within the factory, which I believe contributed to the improvement of the working environment. 【Delivered Products】 ■ 1 unit of Hyper Strong Cool (separate type) ■ Replacement of 2 units of roof fan "SCO-600V" *For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities

At the production factory in Nakano City, Ibaraki Prefecture, the temperature inside the building reaches around 38°C during the summer, creating a very harsh working environment. Although two existing roof fans were installed, the ventilation volume was insufficient for the building. To address the lack of ventilation, we proposed the installation of additional roof fans. We also conducted a demonstration of a spot bazooka and an evaporative cooler. After installation, natural wind flowed in through the shutter opening, creating air circulation inside the building. 【Overview】 ■ Location: Nakano City, Ibaraki Prefecture ■ Business: Production factory for hardware and materials ■ Existing air conditioning equipment: 2 roof fans ■ Newly installed products: 4 roof fans (SVO-750T) *For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities

We conducted a roof fan replacement project at a logistics warehouse in Itami City, Hyogo Prefecture. Ventilation is essential when considering heat countermeasures in warehouses and factories. By expelling dirty indoor air and introducing fresh outdoor air, we can not only manage the health of workers but also improve work efficiency and maintain the quality of machinery and products. Additionally, to cool down a factory, it is necessary to create airflow first. By reviewing and maintaining rooftop ventilators, roof fans, and ventilators, we can achieve ventilation throughout the entire space. [Case Study] - Location: Itami City, Hyogo Prefecture - Products Introduced: 3 Roof Fans "SVK-750TQ" - Content: Replacement of rooftop ventilators *For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities
• Air conditioning equipment
• Ventilation system

Here is an introduction to a case where additional roof fan installation work was carried out in Sagara-gun, Kyoto Prefecture. Due to insufficient ventilation with the existing equipment, an expansion was being considered, and estimates had already been obtained from other companies, but it was decided that our company would carry out the construction. To cool the factory, it is first necessary to create airflow. By reviewing and maintaining the rooftop ventilators, roof fans, and ventilators, overall ventilation of the space can be achieved. Please feel free to contact us when you need our services. 【Case Study】 ■Location: Sagara-gun, Kyoto Prefecture ■Installed Products: 2 Roof Fans "SVK-1050TEX" ■Details: Expansion work *For more details, please refer to the PDF materials or feel free to contact us.

• Heating and cooling equipment and facilities
• Air conditioning equipment
• Ventilation system

We offer rentals of the Brother Enterprise spot cooler 'Pure Drive' with a swing function. It is a vaporizing type cooler, designed to operate without heat discharge, so it does not blow hot air. 【Features】 ■ Powerful cool air Maximum cool air reach of about 9m, maximum air volume of 500m3/h, approximately 90° swing ■ Energy-efficient Electricity cost is 1/4 that of a typical spot cooler, approximately 27 yen per hour ■ No use of freon Environmentally friendly as it does not use refrigerants or freon *For more details, please refer to the PDF document or feel free to contact us.

• Air conditioning equipment

We offer rental of the Brother Enterprise's spot cooler "Pure Drive." It cools the incoming outside air in two stages using the heat of vaporization of water. It delivers only cold air without releasing any exhaust heat. Since there is no impact on the surroundings from exhaust heat, the comfort of the working environment increases, and there is no need for ducts to release exhaust heat. 【Features】 ■ No exhaust heat ■ Powerful cold air ■ Energy-saving ■ No use of Freon ■ No drainage *For more details, please refer to the PDF document or feel free to contact us.

• Air conditioning equipment

The "Hyper Strong Cool" is a high-capacity spot air conditioner that directly delivers cold air to people, unlike regular air conditioners. It maximizes its effectiveness even when ventilating or with windows and shutters open. It is recommended for those who want to feel cold air no matter what. We offer two types: the "Combo Type," which comes with casters for easy mobility, and the "Separate Type," which can be placed indoors and outdoors like a regular air conditioner. 【Features】 ■ Maximum reach of approximately 50m ■ Strong cold air at -13°C from indoors ■ Two types available depending on the usage environment ■ High air volume of 72.3m³/min ■ Ultra-powerful 6 horsepower ■ Functions as a circulation fan while reducing heating costs to about 1/3 *The air volume and other numerical values or comparison values are based on our measurement standards and may vary depending on voltage and other conditions. *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation system

We offer rental of the portable evaporative cooler "Strong Cool X," which comes with casters for easy mobility. No construction is required; it can be set up immediately with a single-phase 100V outlet and water. The tank has a large capacity of 126L, allowing for continuous use for 6 to 8 hours, and it supports both manual and automatic refilling methods. Additionally, it is far more energy-efficient than air conditioning and can be used outdoors in factories, gymnasiums, event venues, or any place that is not exposed to rain. 【Rental Fees】 ■ Rental for 1 to 7 days: 1 unit ¥75,000 (excluding tax, delivery charges separate) ■ Rental for 8 to 30 days: 1 unit ¥100,000 (excluding tax, delivery charges separate) ■ Rental for 31 to 60 days: 1 unit ¥200,000 (excluding tax, delivery charges separate) ■ Summer ALL Maximum 6 months: 1 unit ¥300,000 (excluding tax, delivery charges separate) ■ Cool Breeze Plan: Negotiable (excluding tax, delivery charges separate) *The airflow and other values are based on measurements taken by the manufacturer in May 2020. They may vary depending on voltage and other conditions. *For more details, please refer to the PDF document or feel free to contact us.

• Cooling system

"STRONG COOL 7" is a portable evaporative cooling device. It is capable of lowering the room temperature over a wide range in various locations such as factories, gyms, and event venues. Utilizing the natural principle of lowering the air temperature with the heat required for water to evaporate, it sends a cool breeze through a large fan. [Features] ■ Energy-saving and eco-friendly ■ Outstanding comfort ■ Easy to introduce * The airflow and other numerical values are based on measurements taken by the manufacturer in May 2020. They may vary depending on voltage and other conditions. * For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities

We would like to introduce a case where Kamagaya Kougyou Co., Ltd. donated an ultra-large evaporative cooler, "Strong Cool," to the local Chiba Prefectural Yachiyo Higashi High School as a measure against heat in the gymnasium. During hot periods, although gymnasiums are not exposed to direct sunlight, on days with no wind, the air does not circulate, leading to a heat buildup that can create a worse environment than outdoors. "Strong Cool" allows for adjustable airflow settings: strong, medium, and weak. It is equipped with casters for easy mobility, allowing users to adjust its direction as needed. 【Case Details】 ■ Company: Kamagaya Kougyou Co., Ltd. ■ Donation Recipient: Chiba Prefectural Yachiyo Higashi High School ■ Donated Product: Strong Cool ■ Issue Addressed: Heat measures for the gymnasium ■ Effects: - Circulates air while providing a cool breeze - Helps prevent heatstroke by serving as a place for students to cool down *For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities

In the linen factory you consulted about, women part-time workers mainly carry out the tasks, and it is a workplace with a lot of heat from dryers, washing machines, and ironing machines. To cool down the linen factory, it is first necessary to improve the airflow within the factory. By reviewing and maintaining rooftop ventilators, roof fans, and ventilators, overall ventilation of the space can be achieved. In this case, we installed large exhaust fans and large coolers in a balanced manner. Thanks to the airflow, the perceived temperature has decreased, and we have heard feedback like, "It has become really cool compared to before!" [Case Study] ■ Site: Linen Factory ■ Content: Balanced installation of large exhaust fans and large coolers *For more details, please refer to the external link or PDF materials, or feel free to contact us.

• Heating and cooling equipment and facilities

We received an inquiry regarding ventilation from a valve manufacturing company in Komaki City, Aichi Prefecture. To cool down the valve manufacturing company, it is first necessary to improve the airflow within the facility. By reviewing and maintaining rooftop ventilators, roof fans, and ventilators, we can achieve ventilation throughout the entire space. In this case, we proposed a roof fan replacement project. [Case Study] ■Location: Komaki City, Aichi Prefecture ■Content: Roof fan replacement project *For more details, please refer to the external link or PDF materials, or feel free to contact us.

• Heating and cooling equipment and facilities
• Air conditioning equipment
• Ventilation system

We received an inquiry regarding ventilation at a sealing manufacturing factory in Katsuta-gun, Okayama Prefecture. To cool the sealing manufacturing factory, it is essential to improve the airflow within the facility. By reviewing and maintaining rooftop ventilators, roof fans, and ventilators, overall ventilation of the space can be achieved. In this case, we proposed the installation of additional roof fans. [Case Study] ■ Location: Katsuta-gun, Okayama Prefecture ■ Details: Installation of additional roof fans - 1 unit of SVGH-900T - 2 units of SVO-750T *For more details, please refer to the external link or PDF materials, or feel free to contact us.

• Heating and cooling equipment and facilities
• Air conditioning equipment
• Ventilation system

We received an inquiry regarding factory ventilation from a factory in Sakai City, Osaka Prefecture. To cool the factory, it is first necessary to improve the airflow within the factory. By reviewing and maintaining rooftop ventilators, roof fans, and ventilators, we can achieve ventilation throughout the entire space. In this case, it was found that the existing equipment provided only 2.2 air changes per hour, which is significantly below the required 10 air changes per hour. To approach the necessary ventilation rate, we proposed the installation of new equipment. [Case Study] ■Location: Sakai City, Osaka Prefecture ■Details: 8 units of Roof Fan SVP-900T *For more details, please refer to the external link or PDF document, or feel free to contact us.

• Heating and cooling equipment and facilities
• Air conditioning equipment
• Ventilation system

We received an inquiry from a factory in Tsu City, Mie Prefecture, stating that there is a heat source inside the factory, and it becomes quite hot during the summer, causing difficulties. To cool down the factory, it is essential to first improve the airflow within the factory. By reviewing and maintaining rooftop ventilators, roof fans, and ventilators, we can achieve ventilation throughout the entire space. Ventilation plays a crucial role not only in removing indoor heat, odors, dust, and smoke but also in maintaining indoor cleanliness and lowering temperatures, making it an indispensable auxiliary facility. For customers struggling with heat in their factories, reviewing the ventilation equipment becomes the top priority. [Case Study] - Location: Tsu City, Mie Prefecture - Equipment: 10 units of exhaust blower "Y600D" *Previously installed 3 units of Funabori's "large wall-mounted ventilators." *For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities
• Air conditioning equipment
• Ventilation system

This is an introduction to a case regarding heat mitigation measures for an aircraft hangar in Itami City, Hyogo Prefecture. To cool down an aircraft hangar, it is first necessary to improve the airflow within the hangar. By reviewing and maintaining rooftop ventilators, roof fans, and ventilators, overall ventilation of the space can be achieved. In this case, heat was expelled from the interior using roof fans, while cool air was supplied through cool air fans and large spot air conditioners. As a result, we were able to cool down the space more effectively by creating airflow indoors. [Case Study] ■ Location: Itami City, Hyogo Prefecture ■ Details: - 4 cool air fans - 6 roof fans - 2 single-type large spot air conditioners ■ Effect: Effective cooling possible *For more details, please refer to the external link or PDF materials, or feel free to contact us.

• Heating and cooling equipment and facilities

We would like to introduce a case of replacing roof fans at a factory in Habikino City, Osaka Prefecture due to aging. To cool the factory, it is first necessary to create airflow. By reviewing and maintaining rooftop ventilators, roof fans, and ventilators, overall ventilation of the space can be achieved. In this case, the dimensions of the existing equipment and the replacement units did not match, so we prepared custom sizes. If the existing frames can be reused, the construction can be completed more quickly and costs can be reduced. 【Case Study】 ■ Location: Habikino City, Osaka Prefecture ■ Details: Replacement work of 5 roof fans "SVK-600 (custom size)" due to aging ■ Effects - Creates a comfortable environment - Health management for workers - Contributes to maintaining work efficiency and improving quality *For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities
• Air conditioning equipment
• Ventilation system

We would like to introduce the case of implementing "Strong Cool (special specifications for educational facilities)" in 56 elementary and junior high schools and 6 community centers in Ichikawa City, Chiba Prefecture. The special specifications for educational facilities include features to prevent finger pinching at the air outlet and enhanced durability against impacts from balls and other objects. It can be used immediately with a 100V power supply and water. It is easy to move with casters. With a large water storage tank, it can operate continuously for up to 8 hours, and the wind reach distance is approximately 20 meters, providing powerful airflow. We also offer a demonstration (free of charge) where you can experience the actual unit. 【Case Study】 ■Location - 56 elementary and junior high schools in the city - 6 community centers ■Product Introduced: Strong Cool (special specifications for educational facilities) *For more details, please refer to the external link or PDF materials, or feel free to contact us.

• Heating and cooling equipment and facilities

We would like to introduce a case where four units of the "Roof Fan SVK-600T" were installed at a synthetic resin processing plant in Kameyama City, Mie Prefecture. A site survey revealed that the existing four roof fans were insufficient in capacity and did not meet the required ventilation frequency for the building volume. We selected equipment suitable for the building volume and carried out the replacement work. We will plan according to each environment. Please feel free to contact us. 【Case Study】 ■ Site: Synthetic resin processing plant, Kameyama City, Mie Prefecture ■ Installed Product: 4 units of Roof Fan SVK-600T ■ Issue: Existing roof fans did not meet the required ventilation frequency and were insufficient in capacity ■ Proposal: Selected equipment suitable for the building volume and implemented replacement work *For more details, please refer to the external link or PDF materials, or feel free to contact us.

• Heating and cooling equipment and facilities
• Air conditioning equipment
• Ventilation system