旭光電機 List of Products and Services

We would like to introduce a case study of the implementation of "Signalook" at our factory. Using this product, we conducted an analysis of the operational status of the equipment. We analyzed the potential causes of stoppage based on the signal's lighting status (especially red). We extracted issues from the stoppage causes and examined improvement measures. From the results of the examination of improvement measures, we focused on tasks that required significant man-hours and proposed improvement plans. By implementing these improvement plans, we achieved a reduction of over 30% in man-hours compared to before application. [Case Overview] ■ Agenda: Extraction of improvement points ■ Effects - Successfully reduced setup man-hours by over 30% - Achieved visibility of operational rates, making it easy to confirm the effects of improvements at a glance *For more details, please refer to the related links or feel free to contact us.

• Management System

We would like to introduce examples of our "SmartFit IoT-S02" being implemented in various companies. At East Japan Railway Company, it was introduced into a high-voltage cable fault monitoring system, allowing for the status of fault detectors to be checked via the cloud. In the metal processing industry, it was implemented to visualize the operational status of processing equipment, enabling management of the equipment through vibration data acquisition. Additionally, we have examples of its use in monitoring product storage conditions in warehouses and in alert notifications for water disasters as well as measuring water levels, which can be found in the related links. We encourage you to take a look. 【Case Overview of East Japan Railway Company】 ■Topic: High-voltage cable fault monitoring ■Benefits: Remote monitoring of fault detectors, immediate awareness during incidents, reduction of downtime *For more details, please refer to the related links or feel free to contact us.

• Security cameras and surveillance systems

We will introduce a case study of the implementation of "SmartFitPRO" for measuring the electrical power consumption of manufacturing equipment. With the introduction of this product, there were challenges such as high costs, complex wiring, and maintenance due to the need for sensor installation and LAN construction to acquire the power consumption of equipment dispersed throughout the factory or plant. However, since it only requires attachment to the equipment and communication is done wirelessly, there is no need for wiring. Firmware and parameter updates can be performed remotely, allowing for maintenance without having to go to the equipment. [Case Overview] ■ Topic: Monitoring the power consumption of individual devices ■ Effect: Direct attachment to the device, no LAN construction required *For more details, please refer to the related links or feel free to contact us.

• Management System

We would like to introduce a case study of a logistics tracking system utilizing Sigfox communication, which has implemented a "920MHz band wireless module." When transporting goods by truck, accurately grasping the arrival time and real-time location confirmation were challenges. After implementation, it became possible to accurately determine the arrival time of transported goods and to confirm their real-time location. By utilizing Sigfox, which has base stations established nationwide, operations could be conducted without the need for users to set up base stations. 【Case Overview】 ■ Topic: Estimating logistics arrival times and understanding location ■ Effect: Accurate grasp of logistics arrival times and location *For more details, please refer to the related links or feel free to contact us.

• Radios, walkie-talkies, and intercoms

We would like to introduce a case study of the introduction of "Pico3" to our leak detection sensor. Due to the relationship with power consumption, it was not possible to maintain a constant connection to the cloud, so data was transmitted from the IoT devices only when necessary. By using our product for data relaying, we ensured the flexibility of installing IoT devices. With the introduction of our product, data relaying can be performed for multiple IoT devices using just one unit of our product, which is expected to save communication costs and reduce costs when introducing equipment. [Case Overview] ■ Topic: Wireless Relay Function ■ Effect: Multiple Device Relay *For more details, please refer to the related links or feel free to contact us.

• Radios, walkie-talkies, and intercoms

At Asahi Koden, we provide a consistent one-stop service from development and design to mass-produced products. With proactive investment in technology development and a system that allows us to offer higher quality products at lower prices, we respond to customer demands. Thanks to the technology we have cultivated so far, we can also make appropriate proposals for our customers. Please feel free to contact us with your requests. 【Service Overview (Excerpt)】 ■ Research and Development ■ Design ■ Material Procurement ■ Implementation and Inspection ■ Assembly and Inspection ■ Packaging *For more details, please refer to the related links or feel free to contact us.

• Other services and technologies

We would like to introduce the "Production and Manufacturing Technology" of Asahi Kasei Electric Co., Ltd. To meet the high reliability required for our main products used in railways, ships, and buildings, we possess a state-of-the-art surface mount automation line that allows for small quantities of a wide variety of products. We have developed our own unique production management system that provides timely manufacturing information to the production line, responding to our customers' needs. [Features] ■ Realization of small quantity production of a wide variety of products through a state-of-the-art mounting line ■ In-house development of the production management system *For more details, please refer to the related links or feel free to contact us.

• Other services and technologies

We would like to introduce a case study of the implementation of "Comfort-kun" at Seibu Realty Solutions Co., Ltd. The company's EmiCube, which is used for rental rooms, had a request to check the condition of the room, such as forgetting to turn off the air conditioning when not in use. After the implementation, it became easy to check the status during absence via the web. [Case Overview] ■ Topic: Want to monitor the status during absence ■ Effect: Easy confirmation via the web *For more details, please refer to the related links or feel free to contact us.

• Security cameras and surveillance systems

We would like to introduce a case study of the implementation of "LOCK LOOK" at Seibu Realty Solutions Co., Ltd. The company's EmiCube sometimes becomes vacant, leading to a request for the ability to remotely check for forgotten locks without the administrator having to go directly to confirm. After the introduction of this product, it became easy to check the locking status of doors via the web. [Case Overview] ■ Topic: Want to remotely check for forgotten locks in vacant rooms ■ Effect: Easy confirmation via the web *For more details, please refer to the related links or feel free to contact us.

• Security cameras and surveillance systems

We would like to introduce a case of implementing "meetPi" into a stress-strain monitoring system for mechanical components. Strain measurement consists of expensive strain gauges and data loggers, which not only incur high costs but also require significant volume. By utilizing our product along with the real-time module's CAN communication, we have successfully replaced the conventional data logger system. Using Python, we can develop an anomaly detection algorithm and evolve it into edge AI. 【Case Overview】 ■Challenge: Strain monitoring is costly ■Effect: Successful cost reduction and miniaturization *For more details, please refer to the related links or feel free to contact us.

• Security cameras and surveillance systems

We would like to introduce the 'SmartFitPRO Basic/Standard' that we handle. It can be directly mounted and is DIN rail compatible. Additionally, it requires no coding thanks to a dedicated setup tool. It smartly fits into new equipment, existing equipment, and various scenarios without any limitations. 【Features】 ■ The standard module achieves data sampling and cloud transmission with just parameter settings. ■ Establishment of a remote monitoring system for sensors. ■ Remote control of relay outputs. ■ Easy connection of sensors. ■ Semi-custom software is also supported. *For more details, please refer to the PDF materials or feel free to contact us. 【Exhibition Information】 *We will be exhibiting at the IT exhibition 'Japan IT Week Spring IoT Solutions Expo,' where the latest IT products and services gather! ↓↓↓ For booth details, please refer to the basic information below.

• IoT

We would like to introduce the 'SmartFitPRO Basic/Standard' that we handle. It can be directly mounted and is DIN rail compatible. Additionally, it requires no coding thanks to a dedicated configuration tool. It smartly fits various new and existing equipment, regardless of the scene. 【Features】 ■ The standard module achieves data sampling and cloud transmission with just parameter settings. ■ Construction of a remote monitoring system for sensors. ■ Remote control of relay outputs. ■ Easy connection of sensors. ■ Semi-custom software is also supported. *For more details, please refer to the PDF document or feel free to contact us.

• IoT

This product is a leak sensor that monitors leaks in buildings, facilities, and factories in real-time, 24 hours a day. It features a disconnection detection function when using a leak detection strip and supports two wireless methods: "LTE Cat.M1" and "Sub-Giga + GW." Additionally, by using a dedicated gateway (Pico3), you can consolidate your internet connection. Please feel free to contact us when needed. 【Features】 ■ Easy installation: Simply place it on the floor and click a button to start using it immediately. ■ Wide detection range: By connecting a leak detection strip, it can detect leaks over a wide area, including walls, floors, and ceilings. ■ Energy-efficient: Operates for about 10 years on a button battery. ■ Wide communication range: Easily connects via mobile networks or 920MHz wireless. ■ Line consolidation: Using the dedicated gateway (Pico3) allows you to streamline your internet connection. *For more details, please refer to the PDF document or feel free to contact us.

• IoT

The "Pico3 series" is a compact edge device that can support up to four types of wireless and wired connections. By default, it supports Wifi (BLE) + USB + two types of wireless + one type of wired connection, allowing for uninterrupted operation through watchdog or mutual monitoring with microcontrollers. We offer a variety of types, including "physical quantity transmission type" and "gateway type." 【Features】 ■ You can freely choose optional boards according to the connected devices. ■ By connecting existing IoT devices, it is also possible to increase the means of connecting to the cloud. ■ Users can develop programs using platforms like Arduino. ■ It can receive data from BLE and Sub-GHz IoT devices and upload data to the cloud via Wi-Fi or LTE. ■ No additional devices like AC adapters are needed; you can use your existing USB charger. *For more details, please refer to the PDF document or feel free to contact us.

• IoT

We would like to introduce "Signalook," which we handle. It visualizes the true operating rate by simultaneously monitoring signal display and equipment vibration, and it can be installed on various signal lights (compatible with display lights with a lighting interval of 100mm). Additionally, it is compatible with the equipment operation monitoring and performance collection system "Facteye" by CEC Corporation. 【Features】 ■ Visualizes the true operating rate by simultaneously monitoring signal display and equipment vibration ■ Can be installed on various signal lights (compatible with display lights with a lighting interval of 100mm) ■ Real-time monitoring with intervals as short as 6 seconds ■ Data transmission destinations can be freely set (compatible with various clouds and on-premises) ■ Customization available for both software and hardware ■ Compatible with the equipment operation collection system "Facteye" *For more details, please refer to the PDF document or feel free to contact us.

• IoT

The "SmartFit-02" is a device that operates on two AA batteries and allows you to start IoT without complicated installation. Simply insert the batteries, and it will automatically collect data and send it to the cloud. External power supply via USB is also possible. It comes standard with five sensors: temperature, vibration, humidity, atmospheric pressure, and GPS, and we can customize additional sensors, enclosures, hardware (circuit boards), and software according to your needs. 【Features】 ■ Equipped with temperature, vibration, humidity, atmospheric pressure, and GPS sensors ■ Supports LTE (Cat.M1/Cat.NB1), WiFi, and Sigfox ■ Battery-operated with external power supply available ■ Quality suitable for industrial applications ■ Data can be checked immediately after operation begins ■ Customization available *For more details, please refer to the PDF document or feel free to contact us.

• IoT

The "SSR-01" is a safety sensor for robots that enhances the safety of collaborative robots and industrial robots in relation to humans and objects through non-contact detection using light sensors. It is equipped with high-density cutoff sensors in the arm section, allowing the robot to stop before making contact with the arm. Additionally, a standalone TOF sensor is available, which can be added to the robot's hand section as needed. 【Features】 - TOF sensors are arranged in a semicircular shape around the arm, enabling deceleration or stopping based on the proximity distance. - Service cables extending to the robot's tip are provided, making it usable for customer applications. * One patent registered, five patent applications filed, and design registration completed. * For more details, please refer to the PDF materials or feel free to contact us.

• Picking robots (shelf transport robots, arm picking robots)

Since developing the first automatic door controller in Japan, this has always been a core area of our business. We have consistently responded to the stringent demands for advanced functionality, quality, and safety at limited costs, regardless of the era. For this reason, we take pride in the fact that this field has been the foundation of all our technologies, producing unique sensor/controller technologies that represent the times. In the construction sector, with the increasing intelligence of buildings, the demands placed on sensors/controllers are only growing. There is no doubt that this field will continue to nurture talent and technology in the future.

• Automatic door opening and closing devices for entrances and exits (auto doors)