竹林化学工業 List of Products and Services

"BRG" is a completely water-based molding material that combines the excellent tensile strength and elasticity of basalt fibers, the abrasion and water resistance of acrylic resin, and the non-combustibility, strength, and height of gypsum. By using a dedicated basalt cloth, the bending strength of the product is improved, allowing for the creation of thin and lightweight decorative products. By skillfully incorporating acrylic resin, which is contrary to non-combustibility, the secondary adhesion strength is enhanced, enabling production using hand lay-up techniques like FPR. [Features] ■ Superior tensile strength and heat resistance compared to glass fibers for reinforcing fibers ■ Excellent compatibility with water-based materials ■ Improved bending strength of the product by using dedicated basalt cloth ■ Enhanced secondary adhesion strength *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials

BRG stands for "Basalt Fiber Reinforced Acrylic Resin Gypsum," which is a completely water-based molding material made from basalt, acrylic resin, and gypsum. By adding acrylic resin to gypsum, the strength of the gypsum itself is improved, addressing its brittleness, and overcoming the poor secondary adhesion that was a drawback of gypsum after curing. Additionally, by introducing basalt fibers as reinforcing fibers, it enables the formation of thin films, allowing for lightweight molded products. Since the base material is gypsum, it is similar to GRG (Glass Fiber Reinforced Gypsum), but it can be molded using hand lay-up techniques like FRP, allowing for bag-shaped three-dimensional molding as well. Using a non-combustible certified grade, molded products made according to our specified non-combustible standards have passed the performance evaluation tests stipulated by the Building Standards Act and are recognized as non-combustible materials certified by the Minister of Land, Infrastructure, Transport and Tourism. With the acquisition of the certification number, it is currently gaining attention as an alternative to interior materials produced with GRG. Additionally, from the perspective of reducing plastic use and environmental considerations, it is also being highlighted as an alternative to FRP.

• Interior coating materials

"BRG" is a completely water-based molding material that combines the excellent tensile strength and elasticity of basalt fibers, the abrasion resistance, water resistance, and adhesion of acrylic resin, and the workability, strength, and hardness of gypsum. Since it is entirely water-based, there is no need for a gas mask. It can be handled with just a simple mask to prevent ingestion. Additionally, the wash water generated during molding can be easily separated and disposed of into three categories: water, acrylic resin, and gypsum. 【Features】 ■ Good adhesion: Overlay bonding with existing FRP products is possible. ■ Painting similar to conventional FRP is possible: Primer + painting + topcoat application is feasible. ■ No interlayer delamination: Sufficient strength for overlay fixation of hardware. ■ Smooth putty treatment after demolding: Putty treatment with the same material is possible. *For more details, please refer to the PDF document or feel free to contact us.

• Gypsum board and moldings

Environmentally friendly one-component polyurethane waterproofing material - TX-free - Excluded from special pricing rules - Does not contain substances that cause sick house syndrome Since it is a one-component product, there is no need for mechanical stirring. There are no issues such as poor curing, allowing anyone to easily achieve professional-grade waterproofing.

• Waterproofing work

Takeshiru liquid putty is a water-based one-component putty. It can be applied by spraying, brushing, or rolling, and is suitable for surface formation of styrofoam sculptures.

• others

TakeTack is a styrofoam adhesive with the following characteristics: 1. It is a one-component water-based adhesive, which means it has low odor and is easy to handle. 2. Its white color allows for surface painting with minimal discomfort during the process. 3. Its thin film enables cutting of the adhesive area with little to no discomfort.

• glue
• others

Takeshiru Coating is a protective paint that forms a soft film made of water-based one-component acrylic rubber. It is used to protect sculptures made with a polystyrene core.

• others

Two-component polyurethane resin for hollow molding <Features> By brush application to silicone molds, soft hollow shaping is possible. Being a solvent-free type, it can also be applied to polystyrene foam.

• others

Two-component polyurethane resin for hollow molding <Features> By brush application to a silicone mold, hard hollow shaping is possible. It is a solvent-free type, so it can also be applied to polystyrene foam.

• others

A strong coating can be obtained without the need for stirring or mixing.

• Waterproofing work

Before applying the product, surface preparation and priming (applying a primer) are necessary. Please use the most suitable primer materials depending on the type and condition of the substrate. A topcoat finish will further enhance durability and beauty over time.

• Waterproofing work