太平洋マテリアル List of Products and Services

The "Comprehensive Catalog" is an introduction to the catalog of Taiheiyo Material Co., Ltd., which has many years of construction achievements, focusing on tiles and related materials in the field of architecture, as well as various related materials in civil engineering fields such as building, roads, tunnels, and dam construction. [Some of the contents included] ■ Construction materials ■ Improvement of concrete (on-site casting) performance ■ Concrete inspection ■ Concrete repair/reinforcement ■ Procurement of various materials for cement, ready-mixed concrete, and concrete plants ■ Tiles and plastering ■ Interior and fireproof coatings ■ Landscaping and horticulture *For more details, please refer to the PDF document or feel free to contact us.

"Pacific Pre-Eurox" is a cement-based non-shrink mortar suitable for filling gaps between concrete structures and voids in steel structures. Being a premixed type, it consistently provides uniform quality and performance, demonstrating superior fluidity compared to ordinary mortar, allowing for smooth filling of voids. Additionally, it is non-bleeding and exhibits non-shrink properties under restrained conditions due to the action of a properly proportioned lime-based expansion agent. 【Features】 ■ Premixed type ■ High fluidity ■ Non-shrink ■ Early strength and high strength ■ Excellent workability ■ Heat resistance and seawater resistance *For more details, please refer to the PDF document or feel free to contact us.

"Pacific Pre-Eurox LC-MIX" is a product that combines our cement-based non-shrink grout technology with underwater non-segregating admixture technology. As a pre-mixed product, it can be used to obtain a grout mortar with underwater non-segregation simply by mixing it with the specified amount of water on-site. Additionally, since it uses calcium oxide-based expanding agents as a non-shrink base material, stable hardened properties can be expected even when applied underwater. 【Features】 ■ Underwater non-segregation ■ Prevention of water quality pollution ■ Pre-mixed and high fluidity ■ Non-bleeding and non-shrink ■ High strength *For more details, please refer to the PDF document or feel free to contact us.

"Pacific Pre-Eurox GC" is a simple non-shrink grout concrete that incorporates pea gravel and various admixtures into a low-heat generation non-shrink mortar. Since the placement of non-shrink mortar is not required for construction such as the installation of seismic walls or the closure of openings, it allows for a reduction in construction time. Being a premixed type, it can be used simply by mixing with the specified amount of water on-site, making it suitable for installation in high-rise buildings and narrow spaces. 【Features】 ■ Exhibits excellent fluidity, allowing for smooth filling ■ High initial strength, maintaining stable strength over the long term ■ Can be mixed with machines such as hand mixers and pumped with mortar pumps ■ Low temperature rise due to hydration, making it applicable to areas with relatively large material thickness *For more details, please refer to the materials. Feel free to contact us with any inquiries.

This catalog introduces the "Pacific Eurox Series" of cement-based non-shrink materials. We offer a "mixing agent type" that requires the combination of cement, aggregates, and water during use, as well as a "premix type" that can be easily used by simply mixing with water. We also include information on each product's "features," "standard mix ratios," "examples of properties," and "changes in expansion and contraction rates over time," so please feel free to download and take a look. [Featured Products (Partial)] ■ Pacific Eurox ■ Pacific Pre-Eurox ■ Pacific Pre-Eurox M ■ Pacific Pre-Eurox Super ■ Pacific Pre-Eurox Pad *For more details, please refer to the PDF document or feel free to contact us.

"Pacific Preurox DXP" is a newly developed high-quality, dust-reducing polymer-cement-based non-shrink grout material that combines powdered resin and special admixtures. Its low heat generation and low drying shrinkage reduce cracking after formwork removal, providing weather resistance and durability features such as "adhesion and adhesion durability with structural concrete," "salt resistance," "carbonation resistance," and "freeze-thaw resistance." As a result, it can be used in a wide range of applications compared to conventional materials. 【Features】 ■ Being a premixed type, it ensures consistent quality and performance. ■ Exhibits excellent flowability in addition to resistance to material separation. ■ No bleeding occurs after filling, eliminating the need for void treatment after curing. ■ Demonstrates stable strength characteristics from short-term to long-term. ■ Relatively low shrinkage due to drying helps suppress cracking after formwork removal. Compliant with NEXCO's construction management guidelines for structures, "Performance Verification Items for Section Repair by Casting Method." Registered product in the Ministry of Land, Infrastructure, Transport and Tourism's New Technology Information System (NETIS). Registration Number: KK-230050-A *For more details, please refer to the PDF materials or feel free to contact us.

"Pacific Pre-Eurox AS" is a non-shrink mortar that densifies its structure by pre-mixing aluminosilicate admixtures and fine blast furnace slag powder, effectively suppressing the penetration of deterioration factors (such as salt and moisture) related to embedded rebar. It is particularly suitable for use in coastal areas where measures against salt damage, such as airborne salt and snow melting agent application, are required. Thanks to the action of a non-breeding and appropriately blended lime-based (main component: calcium oxide) expansion agent, it exhibits non-shrink properties under restrained conditions. 【Features】 ■ Densified by the action of a special admixture containing aluminosilicate, it demonstrates high salt resistance while being non-polymer. ■ Like conventional non-shrink mortars, it is easy to pour and pump. ■ The action of a non-breeding and appropriately blended lime-based (main component: calcium oxide) expansion agent allows for non-shrink properties under restrained conditions. ■ After curing, it shows stable strength development from early to long-term. Registered product in the Ministry of Land, Infrastructure, Transport and Tourism's New Technology Information Provision System (NETIS) Registration Number: KK-230051-A *For more details, please refer to the PDF document or feel free to contact us.

The "Pacific Pre-Eurox GX" is a low-carbon product that offers performance equivalent to that of conventional general-purpose non-shrink mortars. By utilizing materials adjusted from industrial by-products and special admixtures, it achieves a significant reduction in CO2 emissions of approximately 55% compared to traditional general-purpose non-shrink mortars. Despite being a low-carbon material, it possesses performance equal to or greater than conventional products and can be used in various situations where non-shrink mortar is required. Additionally, by refreshing the materials used, it has improved low heat generation compared to conventional products, as well as enhanced durability in various aspects, including salt resistance. Thanks to the action of non-bleeding and appropriately blended calcium oxide-based expanding agents, integration with components can be achieved under restrained conditions. 【Features】 ■ Stable quality and performance ■ Excellent workability and improved working environment ■ Integration with components ■ High strength development *For more details, please refer to the PDF document or feel free to contact us.

"Pacific Rubber Latex Concrete" is a premixed type of sectional repair material that has been pre-formulated with necessary components, including ultra-rapid hardening special cement. It possesses special properties and achieves long-term durability for bridge deck slabs and factory floor concrete that are subjected to harsh environments. Mixing is possible with mobile plant vehicles and large mobile mixers, making it suitable for large-scale construction. 【Features】 ■ Excellent strength characteristics ■ Excellent adhesion ■ Stable dimensional changes ■ High durability ■ Good workability ■ Suitable for large-scale mixing construction *For more details, please refer to the PDF document or feel free to contact us.

Pacific Material Co., Ltd. is a total supplier that handles everything from the development, manufacturing, and sales of high-performance construction and civil engineering materials, including cement-related products, as a member of the Pacific Cement Group. We continue to create a new future together with reliable technology and trust that responds to our customers' creativity. Please feel free to contact us when you need our services. 【Business Overview (Excerpt)】 ■ Functional Materials Business ■ Admixture Business ■ Civil Engineering Materials Business ■ Rock Wool Business ■ Special Sales Business *For more details, please refer to the PDF document or feel free to contact us.

"RF Thick Coating Mortar" is a polymer cement mortar for thick repairs that contains nitrite-based rust prevention materials, consisting of the premixed powder "RF Thick Coating Powder" and the SBR latex additive "RF Thick Coating Additive." It is used as a repair material for restoring the cross-section of concrete defects (backfill material), as a substrate leveling material, and as a surface coating material based on polymer cement, primarily applied using trowel techniques. It excels in thick application properties and is suitable for restoring the cross-section of exposed rebar defects due to its inclusion of rust prevention materials. 【Features】 ■ Can be applied in layers without sagging, allowing for thick application ■ Excellent in various performance aspects such as compressive strength, flexural strength, waterproofing, and adhesion ■ Superior rust prevention for rebar due to the effectiveness of nitrite-based rust prevention materials *For more details, please refer to the PDF document or contact us.

"Pacific Pre-Eurox M" is a low heat generation cement-based non-shrink mortar that is mixed with binder (cement + special admixture) and fine aggregate in an approximate weight ratio of 1:2. Due to the low temperature rise associated with hydration, it is suitable for filling in areas where the thickness of the member is relatively large or where the construction cross-section is significant, as it can reduce thermal stress. Additionally, it can be mixed using machines such as hand mixers and can be pumped with a mortar pump. 【Features】 ■ Low heat generation ■ Premixed type ■ High fluidity ■ Non-shrink ■ Early strength and high strength ■ Excellent workability *For more details, please download the PDF or feel free to contact us.

The "Pacific Pre-Eurox XS" is a groundbreaking non-shrink mortar developed for filling joints in bridge structures, wind power foundations, precast components, etc., which require even higher strength characteristics and durability than standard specifications. It ensures the necessary fluidity and workability on-site even in low and high-temperature environments, and after curing, it demonstrates high strength from the initial stage. Due to its outstanding dimensional stability and fatigue durability, it achieves long-term stability (clearing 7 million cycles of repeated loading). Additionally, it has obtained certification from Vestas, the largest wind turbine manufacturer, as a grout material for onshore wind foundations. 【Features】 ■ High fluidity ■ Ultra-high strength (130N/㎟) ■ Dimensional stability ■ High durability ■ High adhesion *For more details, please download the PDF or feel free to contact us.

"TM Mortar Hard" is a fiber-reinforced anti-wear polymer cement mortar that combines a premixed powder "TM Powder Hard," which consists of binding materials, aggregates, and fibers, with an acrylic-based cement admixture polymer dispersion "TM Polymer Admixture A." It can be applied using either trowel or spray methods, making it suitable for repairing damaged areas of concrete and for surface coatings. Please feel free to contact us when you need our services. 【Features】 ■ Excellent wear resistance, adhesion, and durability, allowing for a mortar finish ■ The inclusion of fibers provides superior crack suppression effects ■ Usable with both trowel and spray methods, eliminating the need for multiple materials in the same project *For more details, please download the PDF or feel free to contact us.