白山工業 List of News Articles

The Extreme Environment Robot Research Institute [HERO Lab.] has added a new research and development building to expand its research and development activities and strengthen its prototyping and experimental environment. In conjunction with this, we would like to provide the following information regarding the new Osaki Kogyo Building: - The robotics department on the 6th floor has moved to the new research and development building. - The sensing department on the 7th floor will continue operations on the same floor as before. - The 6th floor will be operated as our satellite office and a showroom for earthquake cushions. We appreciate your continued support. New Research and Development Building Address: 2-5-15 Higashi Gotanda, Shinagawa-ku, Tokyo 141-0022, Towa Building

We will exhibit at the Japan Society of Earthquake Engineering Conference - 2025 (December 9-10).

We will exhibit "Earthquake Zabuton" and "Earthquake Disaster Prevention Training Service" at the 13th Chubu Lifeguard TEC2025 (December 4-5).

The 13th Earthquake Disaster Prevention Technology Exhibition featured the "Earthquake Zabuton," which was introduced in a news segment by KHB East Japan Broadcasting.

At the International Seminar on Ocean Development, we presented our achievements as part of the Japan Foundation - DeepStar Collaborative Technology Development Grant Program.

We will exhibit at the Japan Seismological Society 2025 Autumn Meeting (October 20-22).

We will exhibit "Earthquake Zabuton" and "Earthquake Disaster Prevention Training Services" at the 13th Earthquake Disaster Prevention Technology Exhibition Tohoku (October 8-9).

We will exhibit at the Japan Volcanological Society's Autumn Meeting 2025 (October 1-3).

Our article has been published in the environmental business.

The Extreme Environment Robot Research Institute [HERO Lab.] will open a new research and development building (three stories) in October 2025. With the establishment of the new base, some personnel currently located in the Shin-Ohsaki Kogyo Building will be relocated to the new research and development building. We apologize for any inconvenience this may cause during the relocation and appreciate your understanding. New research and development building address: 2-5-15 Higashi Gotanda, Shinagawa-ku, Tokyo 141-0022, Towa Building Scheduled opening date: October 6, 2025

We would like to inform you that we have signed a basic agreement regarding a business partnership with the Earth Science Comprehensive Research Institute, Inc.

The recruitment guidelines for new graduates and career hires have been updated.

The high-spec slitter machine developed in collaboration was featured in the advertisement for Fukuda Metal in the Sankei Shimbun.

We have completely renewed our recruitment page. With a new design and content, we have enhanced the information to help you gain a deeper understanding of our company's appeal and work environment. We have particularly included many employee interviews and photos that convey the atmosphere of the workplace. Additionally, we have improved the design for better visibility on smartphones, and the process for making an application has become clearer. We aim to create a site that encourages more people to think, "I want to work here," so please take a look.

A paper by our advisor, Shigeki Horiuchi, has been published in the international academic journal "Bulletin of the Seismological Society of America (BSSA)."

At the N-net completion commemorative symposium of the National Research Institute for Earth Science and Disaster Resilience, our company received a letter of appreciation.

An article about the all-terrain electric cat cart "NekoQ" has been published in Newswitch.

An article about the piping inspection robot "Fujin" was published in the Nikkan Kogyo Shimbun.

The efforts of JA Kyosai Ren National Headquarters, which exhibited "Professor Zabuton’s Disaster Prevention Classroom" at the "See, Hear, Experience Cooperative Festival," were featured in Mynavi News.

We will exhibit "Earthquake Zabuton" and "Earthquake Disaster Prevention Training Services" at the 12th Earthquake Disaster Prevention Technology Exhibition in Osaka (July 3-4) and will speak at the seminar on July 4 (Venue B, 14:15).

The experience of "JA Kyosairen Hyogo / Professor Zabuton's Disaster Prevention Classroom" was featured on the YouTube channel "Gachapin Channel (Official)."

Nishida from the Extreme Environment Robotics Research Institute received the "2025 Robotics and Mechatronics Division Best Demonstration Award" from the Japan Society of Mechanical Engineers.

A report on the co-hosted webinar with JX Communications titled "How to Prepare for the Tokyo Metropolitan Area Earthquake and Nankai Trough Earthquake - A Practical Course on 'Protecting Your Company' with 'Visualization of Shaking' and 'Local Damage Information'" has been released.

The disaster damage assessment support system "Gragram" has been adopted by Takanawa Gateway City, as announced in a news release from JR East Architectural Design, the joint development partner.

We will exhibit at the 152nd (Spring 2025) Academic Conference of the Japan Society of Applied Physics from June 4 to June 6.

We will exhibit at the Japan Geoscience Union 2025 Meeting (JpGU2025, May 25-30).

We would like to inform you that we have discontinued the sale of the following product. Discontinued Product Wired LAN Seismometer [Sensor Unit] SU202 Reason for Discontinuation Due to difficulties in obtaining parts, we are unable to manufacture new units. Discontinuation Date Sales ended at the end of March 2025. Alternative Product Wired LAN Seismometer [Sensor Unit] SU301 For inquiries regarding this matter, please contact your sales representative or use the inquiry form.

In a video article by 47 News about the Red Cross and Red Crescent Special Day at the Osaka-Kansai Expo, "NekoQ" from HERO Lab. was featured.

The disaster assessment support system "Gragram," developed in collaboration with JR East Japan Architectural Design, has been adopted by Takanawa Gateway City, as reported in the Transportation Newspaper.

The disaster assessment support system "Gragram," developed in collaboration with JR East Japan Architectural Design, has been adopted by Takanawa Gateway City, as reported in the Construction Communication News.

We will exhibit the robots "KUROKO Crane Balancer" and "NekoQ," developed by HERO Lab., at the Red Cross Week of the Osaka-Kansai Expo (May 4-10, Gallery WEST at the expo site).

The JRE Disaster Damage Assessment Support System Gragram, jointly developed by Hakusan Industrial Co., Ltd. (Headquarters: Fuchu City, Tokyo, President: Minoru Yoshida https://www.hakusan.co.jp/) and JR East Japan Architectural Design Co., Ltd. (Headquarters: Shibuya City, Tokyo, President: Yoshihiko Ito https://www.jred.co.jp/), was adopted in THE LINKPILLAR 1 of Takanawa Gateway City, which opened on March 27, 2025. For more details, please refer to the link below.

We would like to inform you that we have discontinued the sale of the following products. Details Discontinued Products IoT Portable Seismometer SP100, SP101 Discontinuation Date March 31, 2025 Reason for Discontinuation Unable to manufacture new products due to the discontinuation of key component production. End of message.

We would like to inform you that we have discontinued the sale of the following product. Details Discontinued Product Seismic and Volcanic Observation Measurement Unit LF Series Discontinuation Date March 31, 2025 Reason for Discontinuation Unable to manufacture new products due to the discontinuation of major component production. End of message.

Firmware Update ■Firmware Configuration Firmware Revision: Firmware Ver.1.23 (Revision 1264) ■Function Changes - Function to access the SD card of LS-8800 via TP-8800 - Function to update LS-8800 firmware from the WEB interface - Function to display the serial number on the WEB top screen - Change in the setting range for the transmission speed of TP-8800's ACT ■Corrections - Fixed a bug in the WEB settings that allowed the same combination of IP address and port number to be specified for Destination 1, Destination 2, and Monitor WIN.

In this version upgrade, additional features and fixes have been implemented. Please update the firmware. From this firmware, there are two types of FPGA versions (for new FPGA and old FPGA). Support for the new FPGA starts from LS-8800-C S/N1515. Please note that installing the old firmware version prior to Ver.2.50 on the new FPGA LS-8800-C will not function properly. The firmware released from this version onwards supports both the new FPGA and the old FPGA. For the LS-8800-C, please use the standard version Ver.2.61 or the 1KHz version Ver.1.11 or later.

Firmware Update Firmware Revision R-1.3.2 Build=182 ◇Function Changes 1. Added WEB access functionality 2. Added configuration values and items related to data format WIN32 3. Supported GPS rollover until July 2041 4. Added and modified commands due to function changes 5. Other minor function changes ◇Fixes 1. Fixed a bug where SNMP becomes unusable after reloading the configuration file 2. Fixed a bug where the command dmctl config sometimes fails to update settings 3. Corrected file timestamps to JST during FTP login 4. Fixed a bug where the log items "TCXO time," "TCXO time microseconds," and "time error" show abnormal values when the time calibration error exceeds ±1 second 5. Fixed a bug where measurements do not start automatically when powered on with the setting to start measurements automatically enabled

We have published the air balancer "KUROKO-50" on the development case page of 【HERO Lab.】.

We will exhibit "VissQ," "IoT Earthquake Observation Service," and "Earthquake Zabuton (Venue Project)" at the 29th Earthquake Disaster Prevention Technology Exhibition (February 6-7), and I will speak at the seminar on February 7 (Venue E, 14:30).

Our company president, Yoshida, appeared live on the BS TV Tokyo program "Nikkei Morning Plus FT" for a special feature on disaster preparedness.