大同DMソリューション List of Products and Services

The "EDS System" is a system that achieves "reduction of setup time" and "consistent positioning accuracy regardless of who performs the setup." We offer a lineup that includes the "EDS Die Set," "EDS Alignment Jig," and "EDS Base Plate." This system is also referred to as "QDC (Quick Die Change)" or "Rapid Die Exchange System." 【Features】 ■ Unlike traditional die sets with integrated molds, the mold is mounted on a small base plate, which is then attached to the EDS die set. ■ Positioning is completed simply by turning a knob by hand. ■ The tightening of the base plate can be easily done using either a mechanical manual clamp or an automatic hydraulic clamp. ■ By using a dedicated base plate, it is easy to attach and detach molds not only for single-stroke die sets but also for large die sets and multi-process die sets. *For more details, please refer to the PDF document or feel free to contact us.

• Metal plate
• Aluminum alloy door
• Metalwork

Introducing the 'EDS-02/EDS-04' handled by Daito DM Solutions Co., Ltd. The "EDS-02" is a multi-process economic die system that is a composite type formed by connecting the basic model EDS-01. The "EDS-04" is an EDS die set that achieves high precision through a dedicated upper and lower centering jig and a high-precision base plate. 【Features of EDS-04】 ■ Supports die types with extremely small clearances (below 0.02) and molds requiring high precision ■ The location pin section can be finely adjusted in the (Y, X) directions, allowing for precision in the vertical position of the usable die height even after press fitting ■ Inspection data table displays the amount of misalignment of the upper and lower location pins in X and Y values, as well as directional representation through graphs *For more details, please refer to the PDF document or feel free to contact us.

• Special Construction Method
• others

We would like to introduce the sub-die set "Star EDS-07" handled by Daito DM Solution Co., Ltd. As component parts, we offer base plates A and B made of S50C, as well as guide posts and guide bushes made of SUJ2. For die sets with a material thickness of 0.3mm or less, or those requiring precision, please use the guide that supports the upper and lower parts of the base plate. 【Lineup】 ■ EDS-07-1000 ■ EDS-07-2000 ■ EDS-07-3000 ■ EDS-07-4000 *For more details, please refer to the PDF materials or feel free to contact us.

• Metal plate
• Others/Roofing materials (shingles, cement, steel sheets, aluminum)
• Metal roof

The economic die system requires a dedicated base plate. The "Star EDS-05" has two location holes (vanishing finish) that correspond to the location pins on the EDS die set side. Therefore, the punch and die can be positioned by screwing the upper and lower centering into the base plate in advance and using dowel pin insertion for alignment. Additionally, we also offer the high-precision base plate "Star EDS-06." 【Features】 ■ Corresponds to the location pins on the EDS die set side ■ Allows positioning by screwing the upper and lower centering into the base plate and using dowel pin insertion ■ Handle-equipped type is also available *For more details, please refer to the PDF document or feel free to contact us.

• Metal plate
• Aluminum alloy door
• Metalwork

The "Star EDS-03" is a presetter used to adjust the positional accuracy of molds for EDS die sets before assembly. It allows for easy and precise centering of the punch and die onto the base plate. As a result, using the presetter makes work and trials on the press machine faster and simpler. 【Features】 ■ Easy centering of the punch and die onto the base plate ■ Quick and easy work and trials on the press machine *For more details, please refer to the PDF document or feel free to contact us.

• Metal plate
• Aluminum alloy door
• Metalwork

The "Star EDS -01M /01A" is an economic die type designed with two location pins on both the upper and lower sides for mold positioning. A powerful and agile clamp securely holds the positioned mold, ensuring safe fixation and enabling a single setup system. Custom types can also be manufactured based on separate discussions regarding the L dimension. 【Features】 ■ Equipped with two location pins on both the upper and lower sides ■ Custom types can be produced *For more details, please refer to the PDF document or feel free to contact us.

• Special Construction Method
• others

With the responsiveness of our consistent system and the comprehensive strength of the Daido Steel Group, we address various inquiries related to mold components, from cost, strength, and wear resistance to production efficiency.

• Metal plate
• Metallic base
• Aluminum alloy door