日本フローコントロールズ List of Products and Services

Spirotech has completely redesigned its fully automatic Spirovent Superior vacuum automatic degassing unit. With improved performance and commissioning through a menu guide, the S400 and S600 can now accommodate even larger systems than before. Furthermore, the new platform enables remote access and operation via the cloud.

• Air conditioning equipment
• Water Treatment Plant

The FlowCon Green insert is designed as a 3-in-1 solution that combines a full-stroke proportional control valve, an automatic balancing valve, and a differential pressure control valve. This insert features an innovative self-adjusting function, allowing each valve to continuously self-balance. As a result, the required flow rate is accurately supplied to each terminal unit, regardless of pressure fluctuations within the system. Furthermore, each Green insert can be adjusted to set precise maximum flow limits for each circuit without stroke restrictions.

• Automatic Control Equipment

Settings can be made for small water flow! The minimum setting flow rate for conventional domestic constant flow valves was 3 l/min, but the minimum setting flow rate for the Flowcon AB type is 0.486 l/min. It can be set to an impressive 65 levels of flow between 0.486 and 24.47 l/min. It is truly ideal for FCUs compatible with ΔT10℃!

• Drainage and ventilation equipment

A revolutionary valve that combines a control valve and an automatic balancing valve!

• Drainage and ventilation equipment
• Automatic Control Equipment

Automatic balancing valves with a diameter of 50A to 800A.

• Drainage and ventilation equipment

The Flow Control K-type Automatic Constant Flow Valve uses a cartridge with a specific flow rate. When the operating differential pressure range is not met, it functions as a fixed orifice. (Until the design flow rate is reached, it operates under the authority of the control valve in the same circuit.) Once it enters the operating differential pressure range, the opening of the cartridge orifice is automatically adjusted until the specified flow rate is supplied. (As the differential pressure increases, the opening of the orifice closes, and as it decreases, the opening of the orifice opens.) When exceeding the operating differential pressure range, the valve becomes a fixed orifice device again. This prevents all openings from closing completely by the port at the top of the cartridge cap, ensuring that there are no areas of insufficient flow within the system and reliably preventing cutoff operation.

• Sanitary fixtures

The FlowCon SM series valves are dynamic temperature control valves used in HVAC systems, which control the flow of fluid to a specific terminal device or coil. The FlowCon SM valves feature an innovative self-adjusting mechanism that allows each valve to continuously self-balance. This ensures that the required flow rate for each terminal device is supplied accurately. Additionally, each FlowCon SM valve can be adjusted to set an accurate maximum flow limit for each terminal device.

• Sanitary fixtures
• Drainage and ventilation equipment
• Automatic Control Equipment

Automatic dirt separator for heating, cooling, and industrial systems The heart of the Spirotrap lies in its spiral structure through which the fluid passes. This is called the "Spiro tube," and it reliably and automatically causes dirt particles to settle. The Spiro tube can capture extremely small microbubbles and dirt particles, but due to its very open structure, the Spirotrap does not become clogged. Accumulated dirt does not affect the flow of the fluid or result in low pressure loss. Spirotec products

• Sanitary fixtures

Billions of products are installed as components of fluid systems in new and renovated properties. Occasionally, attempts are made to address issues not caused by the system itself but rather to control symptoms using chemicals. The following equipment is all aimed at fluids, but has no impact on water quality. Spirotech products.

• Sanitary fixtures

Automatic air vent valve for heating, cooling, and industrial systems. The non-leak type automatic air vent valve Spirotop is designed to quickly and effectively remove free gases and air pockets. When draining the system, Spirotop quickly and reliably draws in air. Manufactured by Spirotech.

• Sanitary fixtures