Hoshin Co., Ltd. List of Products and Services

The "Alwalk" is an aluminum bracket for vertical inclined surfaces that combines work efficiency, versatility, and safety. It requires no assembly; simply insert the pin to attach it to 48.6Φ single pipes, 50mm square pipes, or 60mm square pipes. It also supports installation with anchor bolts. By using options, it can be attached to the top edge, to 5-minute and 6-minute bolts, to vertical walls and inclined walls (such as tail arms, super tail arms, and other vertical and inclined walls), to steel sheet piles, and can accommodate various cases such as changing and adjusting installation heights. It is suitable for high-altitude work in retaining wall construction for bridges, dams, sediment control embankments, and breakwaters, as well as for scaffolding for final inspections. 【Features】 ■ Compatible with 48.6Φ single pipes, 50mm square pipes, and 60mm square pipes (hooks are removable) ■ Supports slope angles from vertical to approximately 10% incline ■ Can be directly attached to concrete structures ■ Easy installation of handrails ■ Available for rental (nationwide support) *For more details, please contact us or download the PDF.

The "Drainage Pipe Scaffolding" is a scaffolding bracket specifically designed for the installation of drainage pipes, which can be easily set up by simply inserting it into the drainage pipe and tightening it. It is suitable for inspection and repair of retaining walls, as well as for final inspections, and it streamlines the scaffolding installation process. 【Features】 ■ Fixed by simply inserting into the drainage pipe and turning the nut ■ Compatible with pipes ranging from 50mm to 100mm in diameter ■ Can accommodate pipe slopes of up to 25° ■ Foldable design reduces storage space and transportation costs ■ Easy installation of handrails with just bolt fastening ■ Available for rental (nationwide service) *For more details, please refer to the PDF document or feel free to contact us.

The steel simple scaffold FT scaffold is a type of scaffold with removable hooks, making it ideal for formwork dismantling and final inspection scaffolding. It can be directly attached to concrete structures. It can be installed at two points above and below using form ties and bolts, allowing for safer work. Additionally, the lower part has elongated holes, so the installation spacing can be freely set (450mm to 900mm pitch). The angle of inclination can be adjusted freely, and it can be used from a reverse 3-degree slope to about a 9-degree slope. By attaching a dedicated hook (sold separately), it can also be mounted on horizontal battens. For more details, please contact us.

"Aluminum corner bat" is often used in formwork construction, but due to its ease of cutting and drilling, it can be utilized for various purposes. Weighing about one-third of steel, it is easy to transport. After use, it also has a high residual value for recycling, making it economical. Additionally, steel caps are used at both ends to prevent mortar or soil from entering the corner bat, making maintenance easy. 【Features】 ■ Made of aluminum, surprisingly lightweight ■ Resistant to rain, extremely durable, and rust-free ■ Steel caps at both ends ■ Available for shipment from just one piece ■ Weighs about one-third compared to steel *For more details, please refer to the PDF document or feel free to contact us.

The special formwork "Metacon Frame" allows for the seamless connection of steel formwork and plywood using U-clips. It is ideal for use with plywood in sloped curved surfaces, infill sections, top slopes, and edge frames with steel formwork. 【Features】 ○ Seamless connection of steel formwork and plywood using U-clips. For more details, please contact us.

The "Hoshinsepa Construction Method" is a system formwork method aimed at improving efficiency in formwork construction using steel formwork, plywood, and patterned formwork for civil engineering works such as retaining walls, embankments, sediment control dams, and ditches. Sloped structures can be constructed just like standard ones, eliminating the need for tapered wooden bases, and preventing the formwork from floating up through the use of anchor methods. Additionally, it offers high assembly accuracy and results in a clean finished surface. 【Features】 ■ Can be assembled and disassembled with one touch ■ Retaining wall dimensions can be adjusted on-site ■ Sloped structures can be constructed just like standard ones ■ High assembly accuracy and a clean finished surface *For more details, please refer to the PDF materials or feel free to contact us.

"Pikacon" is a tool that allows for the easy and reliable removal of air bubbles from the surface of concrete. It can prevent frost heave and surface delamination. We offer a standard type "Pikacon I," a extendable type "Pikacon III," and a top-edge type "Pikacon II." 【Features】 ■ 90% reduction in bubble marks ■ Beautiful finish that improves construction results ■ Eliminates the need for repairs ■ Suitable for retaining wall construction, coastal work, bridge (parapet) construction, and precast products ■ Prevents frost heave and surface delamination *For more details, please refer to the PDF materials or feel free to contact us.