大林 List of Products and Services

Here is an introduction to a case study on the cleaning (washing) of a sukiya gate. We received a request to clean a sukiya gate that had become noticeably faded. After properly preparing the area, we carefully washed it and removed surface mold, followed by repainting to restore it to a condition close to its original state. Compared to before the cleaning, we did not make any changes to the area around the gate, but it feels like the surroundings have become brighter. [Case Overview] ■ Before Construction: Noticeable fading ■ Construction Details - Removed surface mold and other contaminants - Repainting, etc. ■ Result: The surroundings of the gate feel brighter *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case study of cleaning (washing) a sukiya gate. Before the work, while there were no decayed parts, the overall color fading and darkening were noticeable, giving a sense of the years since its installation. By carefully removing the dirt, sanding the surface, and repainting, we were able to restore the beautiful wood grain, bringing it back to a state close to when it was first installed. 【Case Overview】 ■Before the work: Overall color fading and darkening were noticeable ■Result: Restored beautiful wood grain, returning to a state close to when it was first installed *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case study of cleaning (washing) a Sukiya gate. After many years since its installation, the aging dirt and fading of the Sukiya gate became noticeable. The fittings were temporarily removed, and after carefully removing the dirt, repainting was carried out. The gate has been restored to look as good as new, free of dark stains and dirt, and has become a beautiful white wood color. 【Case Overview】 ■ Work Details: The fittings were temporarily removed, and after carefully removing the dirt, repainting was done. ■ Results - The dark stains and dirt have been eliminated, making it look as if it has been newly made. - The Sukiya gate has become a beautiful white wood color. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case study of the cleaning (washing) of a sukiya gate. We received a request for cleaning a sukiya gate that had noticeable darkening due to years of fading and dirt. By carefully removing dirt down to the details and polishing it, we restored its appearance to that of when it was first installed. The beautiful wood grain emerged as if it had been newly constructed, revitalizing the bright surroundings of the gate. [Case Overview] - Carefully removed dirt down to the details and polished it - Restored its appearance to that of when it was first installed - The beautiful wood grain emerged as if it had been newly constructed, revitalizing the bright surroundings of the gate *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce examples of construction for Japanese-style earthquake-resistant houses. Our group takes pride in the skilled craftsmanship of master artisans who inherit a keen eye for wood and tradition. You can also view construction images through the related links. Feel free to consult us about anything related to exteriors, including earthquake-resistant exteriors, seismic reinforcement, the Japanese-style gate "Sukiya-mon," installation work, delivery times, or individual inquiries. 【Case Overview】 ■ Construction Content: Japanese-style earthquake-resistant house ■ We take pride in the skilled craftsmanship of master artisans who inherit a keen eye for wood and tradition. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case study of a custom wooden fence installation. Utilizing the techniques of sukiya-style gate construction, we manufactured and delivered a wooden fence to separate the entrance approach from the courtyard. All components except for the paneling were prepared in the factory, and finishing work was carried out on-site after installation. The installation time was approximately 5 hours. 【Case Overview】 ■ Approximately W4,600 × H2,000 mm ■ Installation time was about 5 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce examples of Sukiya-style and Shoin-style construction. We combined an elegant fence with a genuine Shoin-style residence. Sukiya-style and Shoin-style are symbols of Japanese culture. Feel free to consult us about anything related to exteriors, including seismic-resistant exteriors, seismic reinforcement, the Japanese-style gate "Sukiya-mon," installation work, delivery times, and individual consultations. [Case Overview] ■ Combined an elegant fence with a genuine Shoin-style residence ■ Symbol of Japanese culture *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case study of construction at a shrine. We manufactured the main hall of Akiba Shrine, which is adjacent to the famous Nemeido Shrine, commonly known for "Monet's Pond," located in Itadori, Seki City, Gifu Prefecture. Construction images are also available in the related links. Feel free to consult us about any inquiries related to exterior construction, including seismic exteriors, seismic reinforcement, and the traditional Japanese gate "Sukiya-mon," as well as installation work, delivery times, and individual consultations. 【Case Overview】 ■Location: Gifu Prefecture ■Construction Site: Main Hall of Akiba Shrine *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case study of the repair of the Karamuki Gate at Gifu Castle. Due to the aging of the Karamuki Gate, which is on the way to Gifu Castle, we were commissioned to carry out repair work. Before the work, the entire gate showed significant signs of age, including mold and dirt, and there were areas that had decayed. However, after the work, we carefully scraped the surface, repaired the corroded areas, and repainted it, restoring the gate to its dignified appearance. 【Case Overview】 ■Before - Significant signs of age, including mold and dirt throughout - Some areas had decayed ■After - Carefully scraped the surface, repaired the corroded areas, and repainted - Restored the dignified appearance of the gate *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case study of office partition installation. Partitions were manufactured and delivered for a certain company to divide their office space. This time, high-quality Hiba wood was used to create a partition with a bright and gentle texture, crafted carefully by a master who also creates traditional Japanese sliding doors. The front side features a lattice design to evoke a Japanese atmosphere. The back side is kept simple, allowing for a full appreciation of the gentle wood texture. By using Hiba wood, the overall office remains bright, and the combination of the partition with indoor plants is excellent. 【Case Overview】 - High-quality Hiba wood used - Front side features a lattice design for a Japanese feel - Back side is simple, allowing for a full appreciation of the gentle wood texture *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case study of a traditional Japanese-style gate at a hotel entrance. For the entrance gate of the hotel, we manufactured and delivered an original design of a Japanese-style gate along with wooden fencing. The wooden fence, installed adjacent to the gate, uses "naguri-bari," which leaves a unique chiseled texture on its surface. After the gate was installed, the construction company completed the finishing work, and the entrance was completed. The Japanese-style gate creates a luxurious and special atmosphere. 【Case Overview】 ■ Approximately W5,460 × H3,090 × D1,235 mm (roof dimensions) ■ Roof: Fully tiled ■ Installation time: About 3 hours (including wooden fencing) *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case of a custom order for a "Sukiya-style gate, Type 1 with a gabled roof." The side walls were constructed first, followed by the installation of the gate. After the gate was installed, the contractor completed the finishing work. The white wood-colored Sukiya gate blends gently and warmly into the ivory-toned exterior, creating a bright entrance when combined with the greenery of the plants. 【Case Overview】 - The side walls were constructed first, followed by the installation of the gate. - White wood-colored Sukiya gate. - It creates a gentle and warm impression within the ivory-toned exterior. - The gate is installed at the top of a single step, reflecting the beauty of traditional Japanese aesthetics. - The gate door is a custom-made sliding door. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

We would like to introduce a case where we manufactured and delivered the "Sukiya Gate Gable Type 1." Although it is small in size, it features a gate area that conveys the essence of Japanese aesthetics and the beauty of wabi-sabi. Please feel free to consult us about anything related to exteriors, including seismic-resistant exteriors, seismic reinforcement, the Japanese-style gate "Sukiya Gate," installation work, delivery times, and individual inquiries. 【Case Overview】 ■ Manufactured and delivered Sukiya Gate Gable Type 1 ■ Color is a chic antique finish ■ Although small, it conveys the essence of Japanese aesthetics and wabi-sabi in the gate area *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

We would like to introduce a case where we manufactured and delivered a custom Sukiya gate with a service entrance. On the day of delivery, the weather was bad, but the installation work was completed in a few hours. After installing the Sukiya gate, the construction company carried out finishing work such as tile installation, and it was completed. The area around the gate was finished with a gentle Japanese atmosphere, utilizing existing pine trees and other plantings. [Case Overview] ■ Sukiya gate combined with a steel structure ■ Direct delivery to the site as a single unit ■ Installation work completed in a few hours ■ Area around the gate finished with a gentle Japanese atmosphere, utilizing existing pine trees and other plantings *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

We would like to introduce a case study of a custom Sukiya gate in an antique color installed in front of the garden of a wedding venue. It can also be used as a photo spot during pre-wedding shoots. When the gate is closed, it has a sense of heaviness. When the doors are opened, the gate serves as a frame, enhancing the beauty of the garden viewed from the gate. 【Case Overview】 ■ Installed in front of the garden of a wedding venue ■ Custom Sukiya gate in an antique color ■ Sense of heaviness when closed, serves as a frame when opened *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

We would like to introduce a case where a custom sukiya gate was manufactured and delivered as the entrance gate for a hotel that opened in a certain location in Tokyo. Materials were prepared in the factory, and assembly work was carried out on-site. This time, we were also commissioned for tile work, using original tiles featuring the hotel’s logo. Although the hotel is located in the city, it has been finished with a lush, tasteful Japanese-style entrance. [Case Overview] ■ Approximately W4,200 × H2,700 mm ■ Original tiles featuring the hotel’s logo were used ■ Finished with a lush, tasteful Japanese-style entrance *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case study of a Sukiya-style gate construction that we conducted. Materials were prepared in our factory, and assembly work was carried out on-site. The foundation work for installation and the erection of rebar for welding were performed by the contractor. The main material used is heartwood from the Chamaecyparis obtusa, similar to the Sukiya-style gate, and the wall sections were treated with FIT WALL to provide a waterproof substrate before installation. [Case Overview] ■ Approximately W2,660 × H2,480 mm (roof dimensions) ■ The main material is heartwood from the Chamaecyparis obtusa, similar to the Sukiya-style gate ■ The wall sections were treated with FIT WALL to provide a waterproof substrate before installation ■ After installation, the contractor applied finishing paint to the walls, completing the project *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case study of a Sukiya gate construction carried out by our company. The gate was built in our factory, and after installation, tile work was conducted on-site. The finishing work, including exterior construction, was completed by the contractor, resulting in a gate area that exudes a gentle Japanese atmosphere. Please feel free to contact us when you need our services. 【Case Overview】 ■ Sukiya Gate, custom-made type with a gabled roof ■ Approximately W3,650 × H2,720 mm ■ Installation time is about 4 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case where the desire to preserve the traditional Japanese atmosphere of the client was realized through the entrance area centered around a Sukiya gate, in conjunction with a residential renovation. The boundary wall installed along the Sukiya gate is made from the original seismic-resistant wall "FIT WALL." From the property side, the gate offers a view of the garden, which is planted with lush greenery that showcases different expressions throughout the seasons. [Case Overview] ■ Approximately W4,800 × H2,800 mm ■ Lush greenery that presents different expressions throughout the seasons *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case where a custom Japanese-style gate was delivered to a certain location in Nara Prefecture. Materials were prepared in our factory, and assembly was carried out on-site over several days. We manufactured a custom Japanese-style gate, referred to as a "Buke Yashiki Mon," which harmonizes with a large mansion suitable for a residence. Additionally, we also produced a custom Japanese-style fence and a FIT welcoming gate to match the gate, completing an entrance area that emphasizes a Japanese atmosphere. [Case Overview] - Assembly carried out on-site over several days - Approximately W4,350 × H3,800 mm - Custom Japanese-style fence and FIT welcoming gate produced to match the gate *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case where a custom Sukiya gate was installed in the exterior renovation of a private residence. Since the installation location was far away, we arranged for a rough-terrain crane truck through the construction company to carry out the installation. The craftsman built the completed form in the factory, leaving the wall finishing and other details, and the installation was completed with the fittings attached. [Case Overview] ■ The completed form was built by a craftsman in the factory, leaving the wall finishing and other details. ■ The finishing was done by the construction company, resulting in completion. ■ An approach was created that highlights the changing expressions of the landscaping throughout the seasons. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

A sukiya gate installed at a private residence was showcased at an exhibition, where it caught the attention of a customer who decided to incorporate it as the "face of the house." After installation, the contractor coordinated the overall design in a black color scheme, resulting in a chic exterior design that evokes a sense of Japanese aesthetics. The sukiya gate blends well with the historically rich area, allowing for an appreciation of its charm despite being part of a new construction. 【Case Overview】 - The overall design was unified in a black color scheme, achieving a chic exterior that conveys a sense of Japanese style. - Despite being part of a new construction, it retains a sense of character. *For more details, please refer to the related links or feel free to contact us.*

• Gates, walls and fences

We would like to introduce a case where we manufactured and delivered a gable roof entrance, with both side walls made using FIT WALL and installed on-site. The entrance is equipped with an electric lock to make opening and closing the door easier, and the electrical wiring has been designed to be unobtrusive. Please feel free to contact us if you have any inquiries. 【Case Overview】 ■ Manufactured and delivered a gable roof entrance ■ Both side walls made with FIT WALL and installed on-site ■ Designed to conceal electrical wiring ■ Roof dimensions: approximately W4,100 × H3,000 × D1,800 mm *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case study of a Sukiya gate construction carried out by our company. A large custom Sukiya gate measuring approximately W9,000 x H3,200 was directly delivered to the site in its completed form, and installation was completed in about 5 to 6 hours. After installation, the contractor performed finishing work such as tile installation, and the project was completed. The Japanese-style fence was measured again after the gate was installed, and was manufactured and delivered later. [Case Overview] - A large custom Sukiya gate measuring approximately W9,000 x H3,200 was directly delivered to the site in its completed form. - The contractor performed finishing work such as tile installation, and the project was completed. - The Japanese-style fence was measured again after the gate installation, and was manufactured and delivered later. - An additional crown wood gate was also manufactured and delivered. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case where we manufactured and delivered a Sukiya gate and side fence in conjunction with the renovation of a private residence's gate. The gate was delivered in its completed form, reducing on-site work. After installation, the finishing work was carried out by the contractor, resulting in completion. The side fence, designed to match the gate, was also manufactured in our factory and delivered together with the Sukiya gate. [Case Overview] ■ The gate was delivered in its completed form, reducing on-site work. ■ After installation, the finishing work was carried out by the contractor, resulting in completion. ■ The side fence, designed to match the gate, was also manufactured in our factory and delivered together with the Sukiya gate. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case study of a Sukiya gate construction that we carried out. Incorporating the client's preferences to the fullest, the main house is a complete Sukiya-style building that is 40 years old. Considering the harmony with the house and garden, we proposed the Sukiya gate and the surrounding stairs. The photos included were taken one year after installation. We delivered a dignified Sukiya gate that embodies the "master's stance." 【Case Overview】 ■ Residence of Mr. I: Custom Sukiya Gate ■ Size: W4500×D2400 ■ Specifications: Side with post function W600 ■ Garage Size: Door W1800×H2000 with double doors on both sides, effective opening W1800 ■ Entrance Size: Sliding door W800×H2000 with electric lock function W4500×D2400 *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

This is a case study of a renovation project for a garage, with the main residence being 20 years old. We completed the sukiya gate at our factory, and there were concerns about the junction with the boundary wall on the right and the roof of the barn on the left. The installation was done using a crane, and we paid close attention to avoid interference with the left roof, but it was successfully installed. The client praised us, saying, "As expected of a pioneer in sukiya gates." 【Case Overview】 ■ Client: K residence - Custom sukiya gate ■ Size: W8200 × D2400 ■ Specifications: Garage entrance and service entrance ■ Garage size: Doorway for garage entrance 5300 × H2200 with automatic function ■ Entrance size: Service entrance W1570 × H2050 sliding door *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case study of FIT power installation in a rental apartment. There were block walls of varying heights built alternately, but there were no retaining walls, posing a risk of toppling during an earthquake. However, since it faced the parking lot, constructing new retaining walls would have compromised convenience, and rebuilding would have significantly exceeded the budget, leading to hesitation in taking measures. After the installation, there were no large-scale construction works, and the construction costs were kept low due to the reduced scope of work. The pathway can be used without any differences from before. 【Case Overview】 ■ Issues - There were no retaining walls for the block walls of varying heights, posing a risk of toppling during an earthquake. - New construction would compromise convenience and exceed the budget significantly. ■ Solutions - There were no large-scale construction works, and construction costs were kept low due to the reduced scope of work. - Standard sizes were used to accommodate the alternately built block walls. *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

Here is an introduction to a case study of FIT power installation at a kindergarten. Although there was a retaining wall separating the kindergarten from the neighboring property, it was not installed at the appropriate pitch, so additional reinforcement was carried out using FIT power. Since the protrusion is smaller than the retaining wall, the children can play as they always have without feeling any discomfort. 【Case Overview】 ■ Additional reinforcement of the retaining wall separating the kindergarten from the neighboring property ■ Additional reinforcement of the wall near the playground equipment ■ Children can play as they always have without feeling any discomfort *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

We would like to introduce a case study of FIT Power installation for seismic reinforcement of the Mannen Wall. One set of FIT Power is installed between each pair of columns to implement seismic reinforcement. On the parking lot side, only the plates are visible, and there are hardly any protrusions, allowing the parking space to remain the same size as before. On the site side, angle supports have been installed. 【Case Overview】 ■ One set installed between each pair of columns ■ Parking space can be used at the same size as before *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

We would like to introduce a case study of FIT power installation with a ten-thousand-year wall. One set is installed between the columns. As this is a made-to-order product, the manufacturing lead time may take up to approximately one month. For details regarding lead times and other inquiries, please contact us. 【Features】 ■ One set installed between the columns ■ Manufacturing lead time is up to approximately one month *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

Here is an introduction to a case study of FIT power installation in a condominium. On the property side, there is a bicycle parking area, but it does not become cramped, allowing for parking as usual. On the neighboring side, a road and a neighboring plate have been installed. The plate is thin, so it does not obstruct passage, and the construction can be completed in a short period, allowing for seismic reinforcement work that takes into consideration the lives of the condominium residents and nearby neighbors. 【Case Overview】 ■ Bicycle parking can be done as usual without feeling cramped. ■ Seismic reinforcement work can be carried out with consideration for the lives of the condominium residents and nearby neighbors. *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

Here is an introduction to a case study of FIT Power installation at a nursery school. FIT Power was installed for seismic reinforcement. It was possible to achieve seismic retrofitting without narrowing the parking spaces or pathways. From the parking area, only the angle columns are visible, and they do not stand out much, thus not harming the landscape. 【Effects】 ■ Achieved seismic retrofitting without narrowing parking spaces or pathways ■ Does not stand out much and does not harm the landscape ■ Ensured the safety of the environment where small children live *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

We would like to introduce a case study of FIT Power installation at a substation. Installed on both the road side and the property side. FIT Power was adopted for the seismic reinforcement of the boundary wall. Feel free to consult us about anything related to exteriors, including seismic exteriors, seismic reinforcement, the Japanese-style gate "Sukiya-mon," installation work, delivery times, and individual inquiries. 【Installation Locations】 ■ Road Side ■ Property Side *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

We would like to introduce a case study of FIT Power installation in a newly built private residence. In this instance, at the request of the homeowner, the flow from the service entrance to the single door next to the parking lot was poor. To resolve this issue, they chose FIT Power. Instead of removing all the support walls, we replaced two support walls from the single door to the service entrance with FIT Power, achieving both a secure flow and disaster prevention from earthquakes and other hazards. [Case Overview] ■ Replaced two support walls from the single door to the service entrance with FIT Power ■ Achieved both a secure flow and disaster prevention from earthquakes and other hazards *For more details, please refer to the related links or feel free to contact us.

• Reinforcement and repair materials

We would like to introduce a case where FIT Power was implemented at a private residence. With the new carport installation, the gate pillar on the right side of the front became a standalone column. Given that this could lead to collapse damage in the event of an earthquake, we applied seismic reinforcement using FIT Power. The reinforcement is unobtrusive and maintains a clean appearance, preserving the original image of the gate. 【Case Overview】 ■ FIT Power typically accommodates block thicknesses up to 150mm, but in this case, we used a thickness of 250mm. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Fences and gateposts

This is an example of the seismic reinforcement of a block wall located within the grounds of a certain high school in Saitama Prefecture, where FIT Power (standard specification model 18) was adopted. Although a retaining wall was installed on the block wall, FIT Power was added as additional reinforcement. FIT Power has a smaller projection than the existing retaining wall, allowing the original site space to be maintained even after installation. 【Case Overview】 ■ Location: Within the grounds of a certain high school in Saitama Prefecture ■ There is a road and a neighboring plate installed on the adjacent side, but there is no projection that narrows the site, and it does not stand out too much. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Here is a case study where FIT Power was installed on the boundary wall of a coin parking lot. Due to the difficulty of dismantling and removing structures for exhaust gas measures, and the desire to maintain as much parking space as possible, it was decided to use FIT Power for seismic reinforcement instead of a retaining wall that would protrude significantly and reduce space. The protrusion of the angle on the property side is approximately 65mm, allowing for seismic reinforcement while maintaining the parking space. [Case Overview] ■ Issues - Dismantling and removal are difficult due to exhaust gas measures, and there is a desire to maintain as much parking space as possible. ■ Results - The protrusion of the angle on the property side is approximately 65mm, allowing for seismic reinforcement while maintaining the parking space. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case where FIT Power was adopted for the seismic reinforcement of a concrete block wall for a certain company. Due to the adjacent apartment building, it was difficult to carry out extensive construction work. FIT Power can reinforce the existing block wall as it is, so although excavation work is necessary, it has less impact on neighboring residents compared to demolition and replacement work, allowing for the seismic reinforcement to be completed in a short period of time. 【Case Overview】 ■ Challenges - It was difficult to carry out extensive construction work due to the adjacent apartment building. ■ Results - Although excavation work was necessary, it had less impact on neighboring residents compared to demolition and replacement work, and the seismic reinforcement was completed in a short period of time. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case where a FIT Power permanent wall type was installed during the renovation of a permanent wall at a public facility in Aichi Prefecture. The lateral reinforcement was arranged by the construction company and was installed along with the FIT Power. By installing the FIT Power on the existing wall and retrofitting it for seismic resistance, we can complete the work in a shorter period with less extensive work compared to demolition and replacement. 【Case Overview】 ■ Location: Inside a public facility in Aichi Prefecture ■ Since the projection is smaller than that of a retaining wall, it can be installed while maintaining the usual space without affecting the equipment. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Here is a case study of a shutter gate installed in a row at a residential development in a certain location in Aichi Prefecture. While slightly varying the shapes and finishes, the simple design resulted in a cohesive and clean-looking shutter gate. Please feel free to contact us if you have any inquiries. [Case Overview] ■ Location: Residential development in a certain location in Aichi Prefecture ■ A cohesive and clean-looking shutter gate has been completed *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

Here is a case study of three shutter gates connected in a row at a residential development in Aichi Prefecture. The gates were manufactured in sections, and the assembly work was carried out on-site. By varying the finishing work, we achieved a sense of unity while creating gates that each have a distinct impression. Additionally, although the design of the two gates side by side is the same, by introducing variations in the exterior design, the left gate has an elegant appearance, while the right gate features a sharp design. [Case Overview] ■ Dimensions: Approximately W5,800 × H2,925 mm *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case where a gate finished in a southern country style was manufactured and delivered. The finishing paint and tile work were carried out by the contractor. The roof has been designed with a portion cut out to allow the growing plants to emerge. Please feel free to contact us when you need our services. 【Case Overview】 - The finishing paint and tile work were carried out by the contractor. - The roof has been designed with a portion cut out to allow the growing plants to emerge. *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case where we manufactured and delivered a custom gate that combines a sukiya-style gate and a FIT-style welcoming gate. Due to the large size of the custom piece, assembly work was carried out on-site, and finishing work such as wall painting was done by the contractor, resulting in completion. It became a Japanese-style garage gate that utilizes the atmosphere of traditional Japanese design, something that can only be created by our company. [Case Overview] ■ Dimensions: Approximately W12,700 × H3,420 mm (roof dimensions) *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences

We would like to introduce a case where a gate and shutter gate that integrated a general-purpose gate and a privacy wall were manufactured and delivered. Multiple crane trucks delivered the items on the same day, and assembly work was conducted on-site. After the installation of the structure, finishing work was carried out by the contractor, and the gate was completed. The finishing materials for the wall were the same tiles and paint used for the residential exterior, creating a sense of unity. [Case Overview] ■ Dimensions - General-purpose gate + privacy wall: Approximately W10,150 × H2,925 mm - Shutter gate: Approximately W6,050 × H3,125 mm ■ Installation time: Approximately 6.5 hours *For more details, please refer to the related links or feel free to contact us.

• Gates, walls and fences
• Other wall materials