サカタ製作所 List of Products and Services

To install metal standing seam roofs, a variety of specialized construction hardware is required. Our company is an expert in this field as a "manufacturer of construction hardware specialized in metal standing seam roofs." In this catalog, we introduce "specialized hardware for overlapping standing seams," "specialized hardware for snap-lock standing seams," and "auxiliary materials." Additionally, we have included information about the matching site "Mitsukuru," which specializes in metal roofing and wall construction. We encourage you to take a look. [Contents (partial)] ■ How to read the catalog ■ Table of contents ■ Specialized hardware for overlapping standing seams ■ Specialized hardware for snap-lock standing seams ■ Auxiliary materials *For more details, please refer to the PDF document or feel free to contact us.

• Roof and gutter construction
• Galvanized steel sheet

Sakata Manufacturing is a specialized manufacturer focused on components that support metal roofs, receiving significant support from across the country. In the field of renewable energy (solar power generation), we also utilize our expertise in metal roofing. This catalog introduces "mounting brackets and frames" for solar panels. We invite you to read it. [Contents (partial)] ■ Sakata Manufacturing supports both roofs and solar power ■ Reasons why Sakata is chosen ■ Table of contents ■ Roof type and solar panel type identification table ■ Examples of implementation results *For more details, please refer to the PDF materials or feel free to contact us.

• Solar power generation equipment

We would like to introduce the "Walkway Installation Unit for Standing Seam Roofs" that we handle. The target roof is the Type II standing seam. The flow direction consists of components at the seam fastening part, ends, and intermediate sections, while the girder direction is composed of intermediate and end sections. Please feel free to contact us when you need assistance. 【Walkway Specifications (Partial)】 ■ Model: MN250-40-2.0 ■ Plate Thickness: 2.0mm ■ Height: 40mm ■ Fixed Span: Within 1,300mm ■ Load Capacity: 150kg (1471N) or less *For more details, please refer to the PDF document or feel free to contact us.

• Facility Design

Our company handles a variety of auxiliary materials related to metal standing seam roofs. "Insulation brackets" are used to insert insulation material between the seams to suppress heat conduction when installing a double-layer roof. By doing so, it is expected to reduce the air conditioning load. In addition, we offer a wide range of products such as "snow retention brackets," which are installed to prevent snow from sliding off the standing seam roofs, and "re-roofing brackets," which are used when re-roofing over an aging roof. Please feel free to contact us. 【Features】 ■ Snow retention brackets - Installed to prevent snow from falling off easily from standing seam roofs - The type of bracket used varies depending on the type of standing seam ■ Re-roofing brackets - Used when re-roofing over an aging roof - Double-layer roofing takes less time and cost compared to removing the existing roof and installing a new one *For more details, please refer to the PDF materials or feel free to contact us.

• Roof and gutter construction
• Others/Roofing materials (shingles, cement, steel sheets, aluminum)
• Other fittings

The folded plate is primarily developed with an emphasis on the structure of its cross-section and is widely used in steel buildings such as factories, carports, and warehouses. It is a representative roofing method for metal roofs. The "Haze-type folded plate" involves a processing technique called "haze" at the joints of the folded plate body, and the tight frame and folded plate body are fixed with a fitting called "tsuruko." As a final step, tightening the haze is necessary. Our company offers a variety of fittings specifically for Haze-type folded plates. Please feel free to contact us if you need assistance. 【Haze-type folded plate roof components (partial)】 ■ Apron face ■ Tight frame ■ Decorative frame ■ Reinforcement legs ■ Ridge tight frame *For more details, please refer to the PDF document or feel free to contact us.

• Roof and gutter construction

The folded plate is primarily developed with a focus on the structural cross-section and is widely used in steel buildings such as factories, carports, and warehouses, making it a representative roofing method for metal roofs. The "overlapping folded plate" method involves penetrating the folded plate body with a tight frame's pointed bolts and tightening it with nuts, washers, and packing. It is orthodox and is used in relatively small warehouses, factories, and carports. Our company offers a variety of fittings specifically for overlapping folded plates. Please feel free to contact us when needed. 【Components of Overlapping Folded Plate Roof (Partial)】 ■ Apron face (ridge face) ■ Decorative frame ■ Eave roof (suspended folded plate) ■ Water surface (stop) face ■ Gable frame *For more details, please refer to the PDF materials or feel free to contact us.

• Roof and gutter construction

In response to requests such as "I want to easily remove the standing seam roof," we have developed the "Standing Seam Demolition Assistant." By using this product, the task of lifting the seams becomes easy, significantly improving work efficiency. We have examples of construction and achievements, so please feel free to contact us. 【Example of Demolition Procedure】 ■ Lift the seam at the starting position of the assistant (we use a pipe wrench) ■ Operate the "Standing Seam Demolition Assistant" ■ Cut the roof to match the length of the truck bed for removal ■ By pushing (or pulling) the roof down, the seam connections will detach *For more details, please refer to the PDF materials or feel free to contact us.

• Equipment leasing and rental
• Work tools

The "Earth Connector" is a component that connects solar panel modules without conductive wires. The installation of this product may cause small scratches on the plating and painted areas of the rack components and solar brackets, but these scratches do not significantly impair the corrosion resistance of the solar brackets. In this document, we conducted a "composite cycle test" to confirm the conductivity of the module frame. For more details, please refer to the related catalog below. [Contents] ■ Composite Cycle Test Results *For more information, please refer to the PDF document or feel free to contact us.

• Solar mounting brackets and fittings (solar fittings and protective sheets)

In this document, we introduce the "corrosion resistance of snow stop fittings." To simulate and promote natural environmental conditions, we conduct a corrosion testing method called "composite cycle testing," which involves repeating salt spray, drying, and wetting atmospheres. One cycle consists of salt spray for 2 hours, drying for 4 hours, and wetting for 2 hours, totaling 8 hours. We have published the test results for cycles 0, 60, and 120, so please take a look. [Contents] ■ Testing Method ■ Test Results *For more details, please refer to the PDF document or feel free to contact us.

• Others/Roofing materials (shingles, cement, steel sheets, aluminum)
• others

There are cases where the water accumulated on solar panels accelerates the corrosion of the mounting brackets. In this document, we will introduce the measures against water rust for our mounting bracket "Haze-type Solar Bracket High Strength Type." Please take a look at the related catalog below for more information. *For more details, please refer to the PDF document or feel free to contact us.

• Solar mounting brackets and fittings (solar fittings and protective sheets)

Just attach it to your drill driver! Rust removal from bolts is completed in seconds!! It is powerful for reusing embedded bolts and removing nuts from rusted bolts!!

• Metalwork

We would like to introduce our insulation fittings, "Dankichi HQ/HQS/HQIII type." "Dankichi HQ" features a box-shaped design that enhances strength and stability. The stopper function allows the fitting to remain open, eliminating the need to loosen the nut and perform the opening action with both hands. Additionally, "Dankichi HQS" is recommended for projects requiring negative pressure (tensile) strength, while the "Dankichi HQIII type" is compatible with socket sizes of 17mm across. 【Features】 <Dankichi HQ> ■ Excellent strength and durability ■ Box-shaped design improves strength and stability ■ Easy installation with the stopper function *For more details, please refer to the PDF document or feel free to contact us.

• Metalwork
• Insulation work

We would like to introduce the "Kaku Haze V-1 Type Tight Frame" that we handle. This is a construction hardware for standing seam roofs, equipped with a washer nut hanger set. The integration of the hanger and reinforcement hardware has improved workability. The main material is galvanized steel plate, and you can choose from three thicknesses: 2.5, 2.8, and 3.2 mm. Please feel free to contact us when you need assistance. 【Features】 ■ Comes with a washer nut hanger set ■ Main material: Galvanized steel plate ■ Hanger material: Galvanized steel plate and stainless steel ■ Bolt and nut: Iron (chromate) M10 ■ Main plate thickness (t): 2.5, 2.8, 3.2 * For more details, please refer to the PDF document or feel free to contact us.

• Roof and gutter construction
• Metalwork