東亜貿易 List of Products and Services

The high durability waterproof tape "Flash Band" is a product of Bostik, one of the largest adhesive and waterproofing manufacturers in the UK. When exposed to the outside (for example, on roofs), its estimated lifespan is over 15 years in gray and over 10 years in bright. It is thin at 1.2mm and can be painted without a primer. This document presents some of the main construction examples with photographs. If you have any questions or need further information, please feel free to contact us. [Examples of Cases (Partial)] ■ Waterproof repair work on a corrugated roof of a certain logistics warehouse in Ishikari City, Hokkaido ■ Waterproofing around windows and entrances of H residence in 1-chome, Furuedai, Suita City, Osaka Prefecture (interior) Flash Band application work ■ Construction of the No. 1 sewage main line in Sakaiminato City, Tottori Prefecture ■ Waterproofing work on the exterior walls and roof of a certain apartment building in Koganei City, Tokyo *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof tape, adhesive, drain, protective panel
• Waterproofing work

"EvoStick SLS Standard" is a high-performance, one-component, moisture-curing adhesive based on silane-modified polymer (SMP). It adheres to almost all types of surfaces, including those that are dense and non-absorbent, and is effective on wet surfaces as well. It has low odor, cures to a hard elastic rubber-like consistency, shrinks very little, and poses no hazards. Since it contains no solvents, it is particularly suitable for bonding expanded polystyrene sheets. 【Features】 ■ Excellent adhesion and resistance to vibration and impact ■ Usable under various weather conditions ■ Operating temperature range -40°C to +100°C ■ Can bond to almost all types of surfaces ■ Particularly suitable for bonding expanded polystyrene sheets due to the absence of solvents *For more details, please refer to the PDF document or feel free to contact us.

• glue

"All-Weather Trowel" is an asphalt compound for troweling. With a high fiber content, it maintains flexibility for a long time even after curing and drying. It is a multipurpose product suitable for waterproofing concrete, asphalt, roofing, and various metals, as well as for caulking and filling gaps. 【Features】 ■ Bostik product ■ Paste form ■ High fiber content ■ Long-term flexibility after curing and drying ■ Standard required amount: 1.6m2/5l *For more details, please refer to the PDF document or feel free to contact us.

• Coating film waterproofing material/permeable waterproofing material

"Bostik Asphalt Paint" is a solvent-based black waterproof coating made from selected asphalt. It is easy to apply on porous surfaces and provides waterproof protection for building surfaces such as steel, zinc, aluminum, concrete, stone, and wood. It serves as a primer for products like Flashband. 【Features】 ■ Bostik product ■ Black, paint-like consistency ■ Made from selected asphalt ■ Easy to apply on porous surfaces ■ Standard coverage (per 22.5L): 90–135m² (one coat) *For more details, please refer to the PDF document or feel free to contact us.

• Coating film waterproofing material/permeable waterproofing material

"Farsal" is a revolutionary multipurpose detergent that combines excellent cleaning power for industrial use with the safety required for household detergents. It removes a wide range of dirt from painted surfaces, plastics, pavements, metals, textiles, and more. It is non-ionic, harmless, and non-irritating. Additionally, the wastewater after cleaning is completely decomposed at sewage treatment plants. It is non-corrosive and non-flammable, and is designated by the UK Petroleum Retailers Association (PRA). Features: - Manufactured by Farxar Chemicals in the UK - Removes a wide range of dirt in factories, construction sites, and homes - Non-toxic, non-corrosive, non-flammable, and non-abrasive - 650g of powder produces 250L of detergent solution, economical - Usable not only for manual cleaning but also with various cleaning machines *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

"Heat Coat" is a surface delay agent for exposed aggregate finishes that excels in weather resistance and durability, suitable for high-temperature and ambient temperature curing, and can be used in precast factories as well as on-site. The coating is resistant to wear and vibration, and will not wash away from the concrete. When used in conjunction with a dedicated release agent, both are easy to apply and quick-drying. Features: - Saves time and effort compared to chipping finishes and acid washing - Demolding time can be significantly adjusted - Usable on molds made of iron, wood, plastic (solvent-resistant), and concrete - Quick-drying - Covers 95m² per 18.9L can (for two coats) *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

"Galva Plug GS" is a non-shrink mortar for grouting made by Fosrock. It is a high fluidity cement-based premix that is easy to work with, and due to the absence of bleeding, it prevents settlement and shrinkage, providing excellent crack durability. The compressive strength is 27.5 N/mm² at 3 days and 38.3 N/mm² at 7 days. It is used for grouting work such as section repair, machine foundations, and seismic reinforcement. 【Features】 ■ Non-shrink mortar for grouting (Fosrock product) ■ Cement and powder form ■ Easy to work with due to high fluidity of the cement-based premix ■ Prevents settlement and shrinkage, and has excellent crack durability ■ Compressive strength: 27.5 N/mm² at 3 days, 38.3 N/mm² at 7 days *For more details, please refer to the PDF document or feel free to contact us.

• Mortar and plaster materials
• Premixed mortar

"GP Prime" is a high-performance EVA-based adhesive from Fosrock. It is a bonding primer for render lock and ordinary mortar, exhibiting excellent water resistance and alkali resistance, providing stable adhesion performance. Additionally, it is effective in preventing water absorption and serves as a finishing additive to prevent drying out. Both should be applied at a dilution of 3 times. [Features] - High-performance EVA-based adhesive from Fosrock - Milky white liquid - Excellent water resistance and alkali resistance - Superior in preventing water absorption - Also effective as a finishing additive to prevent drying out *For more details, please refer to the PDF document or feel free to contact us.

• glue
• Other plastering finishing agents

"Disinfect-All" is a disinfecting cleaner primarily composed of 0.2% benzalkonium chloride. It is non-flammable and non-hazardous. It has a pleasant scent that lasts long and deodorizes. It can be used on floors, walls, sinks, toilets, and other surfaces in homes, commercial facilities, and factories, as well as on hard surfaces like plastic and metal, and soft surfaces like carpets and various fabrics. 【Features】 ■ Cleans and disinfects simultaneously ■ Improves cleanliness and hygiene levels ■ Deodorizes ■ Non-flammable and non-hazardous ■ Pleasant scent lasts long *For more details, please refer to the PDF document or feel free to contact us.

• others

The "EvoStick SLS Turbo" is an adhesive based on silane-modified polymer (SMP) that demonstrates high bonding strength, vibration resistance, and impact resistance in just 15 minutes. It can bond heavy materials such as bricks, stone, and ceramic tiles vertically without support! Additionally, it exhibits excellent adhesion to most construction materials, including non-ferrous metals, wood, polyurethane, aluminum, stone, glass, and mortar. It can be used both indoors and outdoors and is suitable for bonding various panels, boards, and signs. It is also very convenient for various repair works. 【Features】 ■ Fast curing with very quick bonding strength development ■ High bonding strength, vibration resistance, and impact resistance achieved in a short time (15 minutes) ■ Usable temperature range -40°C to +100°C ■ Suitable for both indoor and outdoor use ■ Excellent adhesion to most construction materials ★ Other SMP-based adhesives available include the standard curing speed "SLS Standard" and the transparent adhesive & sealing material "The Dog's Crystal." *For more details, please refer to the PDF document or feel free to contact us.

• glue

"EvoStick SLS Turbo" is not only a very powerful adhesive but also achieves high bonding strength, impact resistance, and vibration resistance in just 15 minutes. In the "Challenge of Continuous Brick Bonding," we experimented to see how many bricks could be stacked by applying them every 15 minutes. [Experiment Details] Bricks were applied every 15 minutes to see how many could be stacked (the goal was 20 bricks). *For more details, please refer to the PDF document or feel free to contact us.

• glue

"Evostick SLS Turbo" is a high-quality adhesive based on silane-modified polymer (SMP). It adheres heavy materials such as bricks, stone, and ceramic tiles vertically without support. Additionally, it exhibits excellent adhesion to most construction materials, including non-ferrous metals, wood, polyurethane, aluminum, stone, glass, and mortar. It can be used both indoors and outdoors and is suitable for fixing roof tiles, skirting boards, siding, and plasterboard rails. 【Features】 ■ Fast curing with very quick adhesion strength development ■ Achieves high adhesion strength, vibration resistance, mobility, and impact resistance in a short time (15 minutes) ■ Service temperature range -40℃ to +100℃ ■ Usable indoors and outdoors ■ Excellent adhesion to most construction materials *For more details, please refer to the PDF document or feel free to contact us.

• glue

"Dart Repellent" is a special silica aqueous solution developed in the UK that exhibits dirt-repellent effects when applied to white or light-colored exterior wall coatings. It is suitable for most water-based resin paints and can be easily applied with brushes, rollers, or low-pressure garden sprayers. It contains a coloring agent that becomes colorless and transparent upon drying, preventing any missed spots. Additionally, it can be spread easily, making it economical! 【Features】 ★ Optimal for most water-based resin paint surfaces ★ Dramatic dirt-repellent effect ★ Contains a coloring agent to prevent missed spots, becomes colorless and transparent after drying ★ Can be spread easily and is very economical ★ Easy and quick to apply ★ Suppresses the growth of mold and moss ★ High reliability due to unique UK nanotechnology *For more details, please refer to the product documentation. Feel free to contact us with any inquiries.

• Medicines

The Clear Shield from LYTEC in the UK is a completely colorless and transparent surface protection treatment for window glass. Glass surfaces treated with Clear Shield are resistant to dirt and do not allow dirt to adhere. This reduces the frequency of cleaning, protects against discoloration, degradation, weathering, and salt damage, and maintains the glass's clarity and sparkle over the long term. It is ideal for all types of glass, including external windows, skylights, solar panels, bathrooms, water areas, and marine vessels. *Exclusive to Ipros users! We are currently offering free examples of Clear Shield installations! There are many more examples available beyond those listed! Please contact us for this opportunity. 【Features】 - Improves the surface characteristics of glass through a durable special room-temperature surface treatment - Durability: 10 to 15 years (representative value for vertical surfaces in building exteriors) - Easy to clean, reducing the frequency of cleaning (average cleaning frequency is less than half) - Applicable to both new glass before installation and old glass in use *For more details, please download the catalog or contact us directly.

• Glass construction accessories and films
• others

Flexi-Acrylic Water-Based Quick-Drying is a high-performance waterproof coating for roofs that is low-odor and quick-drying. It can be applied directly from the can with a brush in just one coat, typically without the need for a primer. It contains synthetic fibers that bridge gaps and form a durable and flexible waterproof membrane. It is particularly suitable for general roof maintenance and emergency waterproof repairs, but can also be used on larger areas. It can also be used for repairing gutters and rainwater drainage. 【Features】 ■ Low odor ■ Quick-drying ■ Contains synthetic fibers ■ Can be applied to damp surfaces *For more details, please contact us or download the catalog.

• paint
• Waterproofing work
• Roof and gutter construction

The "High Durability Glass Surface Protection Treatment Clear Shield," with over 35 years of installation experience in various environments worldwide, protects against discoloration, deterioration, weathering, and salt damage, maintaining the transparency and brilliance of glass for a long time. It can be applied not only to new glass but also to older glass in use. It is suitable for various types of glass, including external windows, skylights, solar panels, bathrooms, water areas, and marine vessels. *We are currently offering free examples of Clear Shield installations! There are many more cases not listed! Please contact us for this opportunity. 【Features】 ■ Improves the surface characteristics of glass through a durable special room-temperature surface treatment ■ Easy to clean, reducing the frequency of cleaning (average cleaning frequency is less than half) ■ Durability: Approximately 10 years *For more details, please contact us or download the PDF to view.

• Glass construction accessories and films
• others

The clear shield-treated glass surface is resistant to dirt and does not allow dirt to adhere. It is easy to clean, reducing the frequency of washing. Additionally, it protects against discoloration, deterioration, weathering, and salt damage, maintaining the glass's clarity and sparkle over the long term. It can be applied to both new glass and older glass in use. It is ideal for all types of glass, including external windows, skylights, solar panels, bathrooms, water areas, and marine vessels. 【Case Study】 Go Bus operates 1,800 buses across New Zealand. Their ongoing issue was the recurring water stain dirt on the exterior of the window glass. The decrease in transparency and visibility was not only unpleasant for drivers and passengers but could also hinder safe driving. Currently, a certain number of buses are specially cleaned and treated with clear shield every week, restoring the glass to a beauty comparable to new vehicles. Ultimately, all 1,800 buses will be treated. Drivers are not only pleased with the appearance of the buses but are also very satisfied with the significant improvement in visibility, especially during rainfall. *For more details, please download the catalog or contact us directly.

• Glass construction accessories and films
• others

The clear shield-treated glass surface is resistant to dirt and does not allow dirt to adhere. It is easy to clean, reducing the frequency of washing. Additionally, it protects against discoloration, degradation, weathering, and salt damage, maintaining the glass's clarity and sparkle over the long term. It can be applied to both new glass and older glass in use. It is ideal for all types of glass, including external windows, skylights, solar panels, bathrooms, water areas, and marine vessels. 【Case Studies】 Photo 1: The power generation of the untreated section clearly decreased, and upon inspection, it was found to be covered in volcanic ash from Sakurajima. Even after rain, the ash remained, obstructing sunlight transmission. The distance to Sakurajima is approximately 40 km. Photo 2: In contrast, the section treated with clear shield did not have ash adhere to it and was washed away by rain, maintaining its initial power generation capacity. *For more details, please download the catalog or contact us directly.

• Glass construction accessories and films
• others

The clear shield-treated glass surface is resistant to dirt and does not allow dirt to adhere. It is easy to clean, reducing the frequency of washing. Additionally, it protects against discoloration, deterioration, weathering, and salt damage, maintaining the glass's clarity and brilliance over the long term. It can be applied to both new glass and older glass in use. It is ideal for all types of glass, including external windows, skylights, solar panels, bathrooms, water areas, and marine vessels. **Adopted by the latest and largest cruise ship Britannia of P&O UK** This is one of the largest passenger ships in the world, with a gross tonnage of over 140,000 tons. The clear shield system has been applied to the external glass. The clear shield greatly contributes to protecting the glass from harsh marine conditions and maintaining a clean appearance and transparency over the long term. The total installation area exceeds 14,700 square meters. *For more details, please download the catalog or contact us directly.*

• Glass construction accessories and films
• others

Non-air-entraining water-reducing agent for waterproofing concrete, Complast, is very economical as it can eliminate the need for expensive sheet waterproofing or asphalt waterproofing in applications such as roof slabs, basements, and water tanks. Additionally, the dense and crack-resistant Complast mixed concrete is widely used in general construction where high durability is desired, as well as in beautifully finished exposed concrete, robust floors, and marine structures. Compared to regular AE concrete, Complast mixed concrete not only exhibits faster strength development but also typically shows a 20-30% increase in 4-week strength. Its resistance to freeze-thaw cycles has been demonstrated in many exposed concrete construction examples in regions such as Hokkaido and Shinshu. For more details, please contact us or download the catalog.

• Bentonite
• Waterproofing work
• Roof and gutter construction

The high-durability multipurpose waterproof tape "Flash Band" is a best-selling product from Bostik, a top-class manufacturer of waterproof materials and adhesives in the UK. Its excellent performance has been proven under various climates around the world, including the high temperatures and humidity of Africa and the severe cold of Scandinavia. 【Features】 ■ Available in rolls of 50mm to 600mm wide and 10m long ■ Improved tear resistance, impact resistance, heat resistance (up to 100°C), durability, and workability ■ Easy installation by simply peeling off the release paper and pressing it onto the application surface ■ Strong adhesion to various surfaces including metal, glass, resin, tiles, stone, painted surfaces, concrete, and asphalt ■ Can be painted with general water-based and oil-based paints ■ Estimated durability of over 10 years for bright colors and over 15 years for gray (with many domestic examples) ■ Free from solvents and toxic substances, ensuring safety and peace of mind during and after installation 《Sample Sheets Available》 Customers wishing to receive a sample sheet should contact us with "Sample Request" noted.

• Waterproof tape, adhesive, drain, protective panel

The Clear Shield System is a completely colorless and transparent surface protection treatment for window glass. Glass surfaces treated with Clear Shield are resistant to dirt and do not allow dirt to adhere. This reduces the frequency of washing, protects against discoloration, deterioration, weathering, and salt damage, and maintains the glass's clarity and sparkle over the long term. It is ideal for all types of glass, including external windows, skylights, solar panels, bathrooms, water areas, and marine vessels. *Exclusive for Ipros users! We are currently offering free case studies of Clear Shield installations! There are many more examples beyond those listed! Please inquire during this opportunity. 【Features】 - Improves the surface characteristics of glass through a durable special room-temperature surface treatment - Durability: 8 to 10 years - Easy to clean, reducing the frequency of washing (average cleaning frequency is less than half) - Can be applied to both new glass before installation and old glass in use *For more details, please download the catalog or contact us directly.

• Glass construction accessories and films
• others

"Features" This is a total system for repair, protection, and maintenance based on a special polyurethane coating, particularly suitable for the regeneration of aluminum and painted surfaces that have significantly deteriorated or weathered. It transforms surfaces to be resistant to dirt and easy to clean, remains transparent without yellowing, withstands various solvents and chemicals, excels in weather resistance, and maintains gloss over the long term. It is suitable for all environments, including urban areas, industrial zones, and coastlines.

• River construction
• Special Construction Method

"Sandtex" is a matte sand-textured, highly weather-resistant emulsion paint. Apply two coats using a brush, roller, or spray. It is widely used under harsh climatic conditions around the world, adheres to any substrate, and does not peel off under vibration. It protects concrete structures from neutralization, and there has been no discoloration or peeling on the exterior walls of offshore lighthouses for over 15 years. 【Features】 ■ Form and Packaging: Paste form, carton containing 2 cans (1 can 10L) ■ Matte sand texture, excellent weather resistance ■ Widely used under harsh climatic conditions around the world ■ Adheres to any substrate and does not peel off under vibration ■ Resistant to salt damage, pollution, and freeze-thaw cycles *For more details, please refer to the PDF document or feel free to contact us.

• Interior construction
• Exterior coating materials
• Interior coating materials

The body concrete Complast XP1000 can achieve more than 20% water reduction with a polycarboxylate-based formulation. It is particularly suitable for structural waterproof concrete that requires high fluidity or early high strength. The delay in setting time due to increased dosage can be significantly reduced, making it useful for slump enhancement with post-addition on-site. For more details, please contact us or download the catalog.

• Waterproofing work

"Rendaloque SP Extra" is a premixed polymer cement mortar designed for ultra-thick repairs. It achieves high density and low shrinkage, providing shortened construction time and excellent workability. Additionally, during spraying, it allows for a thickness of 50mm upwards and over 75mm on wall surfaces, with low dust and low rebound. 【Features】 ■ Form and packaging: Cement powder; 20kg bag ■ Specially developed premix for concrete cross-section repair ■ Achieves high density and low shrinkage, providing shortened construction time and excellent workability ■ Allows for a thickness of 50mm upwards and over 75mm on wall surfaces during spraying ■ Low dust and low rebound ■ Trowel application is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Cement mortar coating
• Waterproofing work

"Uetekishi S" is a wall water repellent suitable for preventing water penetration and efflorescence on concrete, mortar, tile surfaces, plaster, natural stone, and other interior and exterior walls. Apply with a brush or roller in two coats. It is permeable and highly durable against pollution, salt damage, chemicals, high temperatures, and freeze-thaw cycles. Not only is it used for waterproofing, but it also significantly helps maintain aesthetics by suppressing wall contamination, moss, and mold growth. 【Features】 ■ Properties and packaging: Colorless transparent liquid; 18L can ■ Water repellent for interior and exterior walls and prevention of efflorescence ■ Highly durable against pollution, salt damage, chemicals, high temperatures, and freeze-thaw cycles due to its permeability ■ Maintains aesthetics by suppressing wall contamination, moss, and mold growth *For more details, please refer to the PDF document or feel free to contact us.

• tile
• Other wall materials

"Water-based Stabilizer" is a penetrating waterproofing agent that has been made water-based from conventional products, offering non-flammability and low odor. It penetrates into weathered, deteriorated, or decomposed substrates, as well as porous and highly absorbent surfaces, fixing them and forming a waterproof layer within a few hours. It is suitable as a primer for various paints such as "Sandtex" and can be used on concrete and most existing coatings. 【Features】 ■ Properties and packaging: Milky white liquid, 5L can ■ Made water-based from conventional products, non-flammable, low odor ■ Penetrates into highly absorbent surfaces, fixing them and forming a waterproof layer within a few hours ■ Suitable as a primer for various paints such as "Sandtex" ■ Usable on concrete and most existing coatings *For more details, please refer to the PDF document or feel free to contact us.

• Bricks and Corks
• ALC
• Waterproofing work

"Dart Repellent" is a special silica aqueous solution developed in the UK that demonstrates dirt-repellent effects when applied to white or light-colored exterior wall surfaces. It is suitable for most water-based resin paints and can be easily applied with brushes, rollers, or low-pressure garden sprayers. It contains a colorant that becomes colorless and transparent upon drying, preventing any missed spots. Additionally, it can be spread easily, making it economical. 【Features】 ■ Easy and quick application ■ Coverage area: 15–25 m²/L ■ High effectiveness even in polluted areas ■ Suppresses mold and moss *For more details, please refer to the product documentation. Feel free to contact us with any inquiries.

• Medicines

High-performance emergency prevention coating for roofs, Flexi-Acrylic, can be applied to wet surfaces as it adheres by replacing the water in the substrate, and it provides immediate waterproofing. 【Features】 ■ Direct brush application from the can in one coat, usually no primer needed ■ Can be applied to wet surfaces as it adheres by replacing the water in the substrate, and it provides immediate waterproofing ■ Contains synthetic fibers, forming a tough and flexible seamless layer

• paint
• Waterproofing work
• Roof and gutter construction

The transparent thin film protection method for metal and painted surfaces, "Light Coat 2200 System," is a unique technique that combines high-performance products with specialized cleaning and restoration technology. The surface after application is easy to wash and maintain clean, resistant to chemical contamination and discoloration, and protected from deterioration. 【Features】 ■ Excellent weather resistance with transparent thin film protection treatment ■ Stable against ultraviolet rays and does not yellow ■ Extremely superior chemical resistance, better than most organic coatings ■ Graffiti can be removed without damaging the underlying surface ■ Suppresses or prevents surface deterioration caused by alkalies ■ Restores weathered and faded surfaces to a bright, clean finish ■ Significantly reduces time, effort, and costs required for maintenance ■ Skilled professional installation team (licensees) for application

• Special Construction Method

Even with a water reduction of over 15%, it has a buttery consistency and significantly increases strength density. It can be walked on within 24 to 36 hours. The next flooring finish can be applied in a curing period of one-half to one-third. The standard mix is 1:3 to 4, making it easy to work with and minimizing concerns about crazing or cracking, resulting in high economic efficiency due to shortened construction schedules. 【Main Features】 ■ Can be walked on within 24 to 36 hours, allowing for rapid traffic opening and use as a material storage area. ■ Accelerates the drying of the mortar, reducing the time to reach the specified moisture content to typically one-half to one-third. ■ Even with a 15-17% water reduction, it maintains a buttery consistency and can be applied with a cement ratio of 1:3 to 4, allowing for a significant reduction in cement usage.

• Waterproofing work