Design Software Product List and Ranking from 47 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.

Design Software Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.

  1. 綜合システム 本社 Osaka//others
  2. エムティシー Tokyo//others
  3. メガソフト 大阪本社、東京オフィス Osaka//others
  4. 4 三井ホーム 木材建材事業本部 Tokyo//Building materials, supplies and fixtures manufacturers
  5. 4 i CAD - 機械設計向け3DCAD（3次元CAD）開発元 - Tokyo//Information and Communications
Go to Company Ranking

Design Software Product ranking

Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.

  1. Civil engineering design software "Detention Basin (Disaster Prevention Detention Basin) Capacity Calculation System" 綜合システム 本社
  2. Civil engineering design software "Design of U-shaped Retaining Walls" 綜合システム 本社
  3. Civil engineering design software "Design of Drainage Pits" 綜合システム 本社
  4. Logistics Warehouse 3D メガソフト 大阪本社、東京オフィス
  5. 4 Examples of large space roofs: 'Wood Big Span Construction Method' 三井ホーム 木材建材事業本部

Design Software Product List

121～135 item / All 156 items

Displayed results
Civil engineering software "Tameike Hydrological Calculation"

Civil engineering software "Tameike Hydrological Calculation"

Calculate the design flood flow rate using outflow calculations and perform hydraulic design calculations for the spillway.

The "Reservoir Hydraulic Calculation" is a civil engineering design software that can perform calculations for the design flood flow rate in reservoirs and the hydraulic design calculations for the approach channel, adjustment section, transition section, discharge channel, energy dissipation structure, downstream channel, and freeboard based on the land improvement project design guidelines "Reservoir Maintenance." Calculations for the design flood flow rate and the design of the spillway can be performed as both batch calculations and individual calculations. Additionally, the design flood flow rate can be calculated in batches for two probability years (such as 200-year probability and 100-year probability), allowing for flow rate selection for each spillway facility. 【Features】 ■ Supports examination of storage effects based on A-section flow rates ■ Rainfall waveforms can accommodate central concentration type, central concentration type (Hyogo Prefecture), and rear concentration type ■ The elevation at the downstream end of the transition section can be set using either calculated values or input values ■ The channel width of the transition section can be set to constant width, tapered, or constant width + tapered *For more details, please refer to the PDF materials or feel free to contact us.

  • Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Civil engineering design software "Kago Construction and Flat Sheet Construction Design"

Civil engineering design software "Kago Construction and Flat Sheet Construction Design"

We will design "basket mats," "square-shaped baskets," and "flat-pressed blocks."

This product is a system for calculating the stability of gabions (overturning, sliding, bearing capacity), flow force (representative flow velocity), and wire mesh strength. The basket mat is applicable to flat laying methods and multi-layer stacking methods. The flat laying method calculates the representative flow velocity and examines the flow force, while the multi-layer stacking method conducts stability calculations, determines the representative flow velocity, and examines the flow force. Additionally, the flat laying block is used in the articulated block revetment method, which calculates the representative flow velocity and conducts stability checks (verification of sliding and peeling). 【Function Details (Excerpt)】 ■ Input (Gabion) - The front slope of the gabion is set to a steep slope of 1:1.5 or less. - The number of gabion layers can be up to 20 layers. ■ Input (Basket Mat) - The slope of the revetment method for the flat laying method is set to a gentle slope of 1:2.0 or more. - The number of wire cage layers can be up to 20 layers. ■ Input (Flat Laying Block) - The slope of the revetment method for the articulated block revetment method is set within the range of 1:1.5 to 3.0. *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Analysis and prediction system
  • Baskets and futon baskets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Civil engineering design software "Liquefaction Analysis"

Civil engineering design software "Liquefaction Analysis"

We will calculate the resistance rate FL against liquefaction and determine the liquefaction.

This system calculates the resistance rate FL against liquefaction based on the "Design Guidelines for Road Bridges and Their Commentary V Seismic Design" and the "Guidelines for Structural Design of Building Foundations," and performs liquefaction assessment and liquefaction index calculations. The calculation results are easily visible on the screen, and it is also possible to modify the calculated values directly on the screen. Additionally, in the case of the "Design Guidelines for Road Bridges," it conducts an assessment of fluidization and calculates fluid forces. 【Features】 ■ Calculates the resistance rate FL against liquefaction ■ Performs liquefaction assessment and liquefaction index calculations ■ Calculation results are clearly visible on the screen ■ Allows modification of calculated values on the screen ■ Demonstrates effectiveness for prompt evaluations *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Analysis and prediction system
  • Other Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ground Bearing Capacity Design Calculation System ST Version/EX Version

Ground Bearing Capacity Design Calculation System ST Version/EX Version

We will conduct studies on the thickness of the ground improvement layer, calculate the amount of settlement, and perform stability calculations based on circular sliding!

This product is a system for calculating settlement amounts, stability calculations using circular sliding, calculating the allowable vertical bearing capacity of shallow foundations, and examining the thickness of ground improvement layers. In the calculation of settlement amounts, it is possible to calculate "consolidation settlement," "immediate settlement," "residual settlement," and "lateral displacement." In the calculation of allowable vertical bearing capacity, it is possible to calculate the "bearing capacity of shallow foundations on level ground" and the "bearing capacity of shallow foundations on sloped ground." 【Features】 ■ Conducts examinations of ground improvement layer thickness, calculates settlement amounts, and performs stability calculations using circular sliding. ■ In the calculation of settlement amounts, it is possible to calculate "consolidation settlement," "immediate settlement," "residual settlement," and "lateral displacement." ■ In the calculation of allowable vertical bearing capacity, it is possible to calculate the "bearing capacity of shallow foundations on level ground" and the "bearing capacity of shallow foundations on sloped ground." *For more details, please refer to the PDF materials or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Analysis and prediction system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Civil engineering design software "Plate (Circular/Rectangular) Calculation" <Finite Element Method/Simplified Method>

Civil engineering design software "Plate (Circular/Rectangular) Calculation" <Finite Element Method/Simplified Method>

Calculate the sectional forces when a load acts on circular or rectangular plates! It is possible to check the stress of reinforced concrete.

This system is a program that calculates the sectional forces when loads are applied to circular and rectangular plates and performs stress checks. It consists of two products: "Calculation of Plates (Circular and Rectangular) using Finite Element Method" for calculating sectional forces using the finite element method, and "Calculation of Plates (Circular and Rectangular) using Simplified Method" for calculating sectional forces using series solutions. Additionally, the load applied to the plate can be up to a maximum of five for a single plate. 【Function Details (Excerpt)】 ■ Load Conditions - Uniformly distributed load - Uniformly variable distributed load - Partial line load - Concentrated load - Partial uniformly distributed load ■ Stress Checks - Stress checks for reinforced concrete are possible - For the simplified method in the case of rectangles, considerations for bending stress and shear stress are conducted - In the case of the finite element method, considerations for bending stress are conducted *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Analysis and prediction system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Civil engineering software "Design of Bridge Anti-Fall Walls"

Civil engineering software "Design of Bridge Anti-Fall Walls"

We will implement measures to prevent bridge collapse based on the Road Bridge Design Guidelines, including the design of expanded footing and lateral displacement restraints!

This system implements bridge collapse prevention measures based on the "Road Bridge Design Guidelines and Commentary V Seismic Design" with reference to the "Case Studies of Seismic Reinforcement Methods for Existing Bridges." Support conditions can be selected from "rubber bearings," "fixed bearings," and "movable bearings," and the plan shape can be chosen from "straight bridge," "skew bridge," and "curved bridge." In the bridge axis direction, it can be designed with a bridge collapse prevention wall, and in the perpendicular direction, it can be designed as a lateral displacement restraint structure. 【Function Details (Excerpt)】 ■ Current Status Survey of Footing Widening - Check whether the "girder bearing length" of the existing substructure is satisfied. - Support conditions can be selected from "rubber bearings," "fixed bearings," and "movable bearings." - The plan shape can be chosen from "straight bridge," "skew bridge," and "curved bridge." - The presence or absence of bridge collapse prevention structures can be selected. - It is possible to calculate the horizontal load capacity PLG of the abutment. *For more details, please refer to the PDF document or feel free to contact us.

  • Architectural Design Software
  • Other Software
  • Bridge Construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Civil Engineering Software "Design of Drop Structures" <Water Cushion Function Version>

Civil Engineering Software "Design of Drop Structures" <Water Cushion Function Version>

Comparison and examination of cushion scale! We will design water cushion type drop structures and vertical wall type floor stop drop structures.

This system conducts the design of "water cushion type drop structures" based on the "Design Standards and Operation/Explanation for Land Improvement Project Planning and Design (Waterway Works)." It allows for comparative analysis of cushion sizes for each flow case, and calculations regarding the water level in the boundary area of the drop condition, the flow conditions near the drop inlet, as well as the upstream and downstream connection channels. The design flow can be set for up to a maximum of five cases. 【Function Details (Excerpt)】 ■ Comparative analysis of cushion sizes for each flow case 　・Verification of B1≦B0≦2B1 　・Verification of P＞3M 　・Verification of the slope angle of the water vein center: θ 　・Examination of the water cushion length: L0 *For more details, please refer to the PDF document or feel free to contact us.

  • Architectural Design Software
  • Other Software
  • Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Civil engineering software "Rockfall Simulation Analysis"

Civil engineering software "Rockfall Simulation Analysis"

It visually represents the falling motion of falling rocks using trajectory diagrams, stopping positions, stopping speeds, and more!

This system simulates the behavior of falling rocks through analysis using five methods. The simulation results for the position, falling speed, and motion conditions of the falling rocks at each measurement point are analyzed from multiple angles, visually representing the falling motion of the rocks through trajectory diagrams, stopping positions, stopping speeds, jump amounts, jump heights, and collision speeds with structures. Additionally, the input details regarding slope conditions, inspection locations, and the installation of countermeasures can be confirmed on the input confirmation screen. 【Function Details (Excerpt)】 ■ Simulation Methods - You can choose from five methods of point mass falling rock simulation. ■ Trajectory Diagrams - Outputs overlapping diagrams for all cases and individual case diagrams. - The tracking of falling motion ends when a collision with countermeasures occurs. ■ Stopping Position and Stopping Speed - Outputs the distribution of stopping positions of falling rocks and the motion conditions before stopping. - The stopping speed diagram represents motion conditions through the direction and length of the lines output in the diagram. *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Analysis and prediction system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Civil Engineering Software "Rockfall Protection Net and Fence Design"

Civil Engineering Software "Rockfall Protection Net and Fence Design"

Registration of wire ropes, supports, and wire mesh components is possible! Calculations for rockfall protection works and rockfall prevention works will be conducted.

This system performs calculations for rockfall protection works, including "Pocket-type Rockfall Protection Nets" and "Rockfall Fences," based on guidelines such as the "Rockfall Countermeasure Handbook" and "Rockfall Countermeasure Work Manual." It is also capable of calculating preventive measures against rockfalls, including "Covered Rockfall Protection Nets," "Wire Rope Hanging Works," and "Wire Rope Laying Works." Additionally, it allows for the registration of materials such as wire ropes, supports, and wire mesh. 【Features】 <Rockfall Protection Works> ■ Examination of absorbable energy ■ Verification of wire mesh and wire rope materials ■ Verification of support stress ■ Examination of fence height <Rockfall Prevention Works> ■ Verification of wire mesh and wire rope materials ■ Verification of rock bolts ■ Examination of anchor bolts *For more details, please refer to the PDF materials or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Custom insole design software "Insole G"

Custom insole design software "Insole G"

The way of working will change with the digital integrated system! We will propose an original system.

We would like to introduce the "Auto Design Insole G," handled by Dream GP. While utilizing the parametric design of the Auto Design Insole, it is possible to incorporate your company's instructions for insole production into the system. Please let us know what kind of design you would like to create, as well as any current issues or requests you have. We will propose an original system for you. 【Features】 ■ The digital integrated system changes the way work is done ■ Customizable because it is developed in-house ■ Utilizes the parametric design of the Auto Design Insole ■ It is possible to incorporate your company's instructions for insole production into the system *For more details, please refer to the PDF materials or feel free to contact us.

  • Other Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Asphalt mixture design software 'Roadpia21'

Asphalt mixture design software 'Roadpia21'

Leave the troublesome detailed calculations to the system!

"Roadpia21" is a software for creating mix design documents that automatically performs complex calculations such as aggregate mixing ratios and theoretical densities by inputting test results. It can generate gradation curve diagrams, Marshall property graphs, and design penetration graphs, among others. This system is useful for quickly and comfortably creating mix design documents for asphalt mixtures, which typically take a long time, along with accompanying quality control documentation. Please feel free to contact us if you have any requests. 【Main Features】 ■ Creation of gradation curve diagrams ■ Leave the calculation of theoretical density to us ■ Integration with quality management systems ■ Marshall stability test *For more details, please download the PDF or contact us.

  • Scientific Calculation and Simulation Software
  • Other Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
iBwave

iBwave

You can export layout plans to AutoCAD! Compatible with public safety network design.

iBwave provides solutions for the design and deployment of indoor wireless networks. "iBWAVE DESIGN" is software specialized for the design of indoor wireless networks. Components are automatically assigned to hierarchies on the design plan. Additionally, licenses can be managed through a web-based portal. 【Features of iBwave Design Enterprise】 <Software for designing large-scale and complex indoor wireless networks> ■ Capable of designing for multiple technologies and buildings ■ Supports technologies such as 5G and Wi-Fi 6 ■ Licenses can be managed through a web-based portal ■ Progress and quality of projects can be tracked *For more details, please refer to the related links or feel free to contact us.

  • Company：B7
  • Price：Other
  • BI Tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Civil engineering design software "Intersection Calculation of Piles and Supporting Ground"

Civil engineering design software "Intersection Calculation of Piles and Supporting Ground"

We will calculate the intersection point between the pile and the supporting ground surface to determine the elevation of the intersection point.

The 'Intersection Calculation of Piles and Supporting Ground' is an Excel software that assists in determining pile length. Based on multiple ground elevation information set from boring locations and geological cross-sectional diagrams, it calculates the intersection between the pile and the supporting ground surface to determine the elevation of the intersection. Additionally, we accept bug reports and requests via email, and if a version upgrade occurs, we will notify you on our website. 【Intersection Calculation Method】 Step 1: Setting Ground Elevation Step 2: Setting Triangle Ground Surface Step 3: Extracting Triangles that Include the Pile Step 4: Determining the Triangle Used for Calculation Step 5: Calculating the Intersection between the Pile and Triangle Ground Surface *For more details, please download the PDF or feel free to contact us.

  • Piles, caissons, sheet piles
  • Other Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] Yorozu Engineering Co., Ltd.

[Case Study of 3D CAD Software for Mechanical Design] Yorozu Engineering Co., Ltd.

[Free Case Study Provided] Minimize design time and costs for production equipment through complete 3D design and automated design!

As a member of the Yorozu Group, we would like to introduce a case where "iCAD SX" was implemented at Yorozu Engineering Co., Ltd., which designs, manufactures, and sells automotive parts molds and production equipment. The company utilizes our product, which has top-down design capabilities, to smoothly advance complete 3D design from the conceptual stage. They have achieved significant results, greatly improving design efficiency and utilizing strength analysis to realize lightweight and energy-saving designs for their equipment. [Case Overview] ■ Challenges - Smoothly advance complete 3D design from the conceptual stage ■ Results - Significantly improved design efficiency - Achieved lightweight and energy-saving designs for equipment using strength analysis *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] Enshu Corporation

[Case Study of 3D CAD Software for Mechanical Design] Enshu Corporation

[Free Case Studies Available] From design to assembly, a seamless process with 3D models, aiming for a "total cost reduction of 30%" across all stages!

We would like to introduce a case study on the implementation of "iCAD SX" at Enshu Corporation, a major machine tool manufacturer. The company has developed a three-year plan to convert all design processes for FTL (Flexible Transfer Line) and FMS (Flexible Manufacturing System) into 3D. In the first year of transformation, 2D and 3D have been seamlessly integrated, and the ultra-fast "iCAD SX Mechanical PRO" has been practically applied to the design of the new system line, yielding significant results. [Case Overview] ■ Challenges - Converting all design processes for FTL and FMS into 3D ■ Results - Seamless integration of 2D and 3D - Practical application of "iCAD SX Mechanical PRO" to the design of the new system line *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Design Software

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.