Calculation software×ユニオンシステム - List of Manufacturers, Suppliers, Companies and Products

Calculation software Product List

61～67 item / All 67 items

Displayed results
Structural Calculation Software Example | RC Structure 12-Story Above Ground, 1-Story Below Ground Office Building

Structural Calculation Software Example | RC Structure 12-Story Above Ground, 1-Story Below Ground Office Building

Can accommodate irregular shapes! By performing horizontal load capacity calculations, we design results that are close to the initial image.

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' used for a 12-story above-ground and 1-story below-ground office building made of reinforced concrete (RC). The design utilizes the irregular shape of the site, maintaining a 500mm setback, which directly translates into the building's floor plan. Structurally, it features two volumes that rise and connect in between, creating a cohesive structural plan. Additionally, columns are placed in the center of spans where there are no existing piles, and these columns are connected by cantilever beams, forming a three-dimensional framework with orthogonal columns and a moment-resisting frame. [Case Study Overview] ■ Use: Office Building ■ Structural Type: RC (PRC) ■ Levels: 12 above ground, 1 below ground ■ Design: ANDO Imagineering Group/AIG (Tokyo) *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • 2.png
  • Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Structural Calculation Software Example │ 19-Story Office Building with RC and SRC Construction

Structural Calculation Software Example │ 19-Story Office Building with RC and SRC Construction

Planning a super high-rise using PC construction on a small site! Introducing a memorable project.

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' used for a 19-story office building constructed with RC and SRC structures. Initially, a pentagonal office building was planned on a small site to maximize the sky ratio using PCa and PC. Due to the scale, performance evaluation was necessary, and ultimately, we aimed for time history response analysis. From the perspective of data linkage, we consistently utilized tools related to the foundation, from the creation of the announcement wave to response analysis. 【Example Overview】 ■ Use: Office Building ■ Structural Type: RC + SRC (PCa + PC) ■ Stories: 19 ■ Design: ANDO Imagineering Group/AIG (Tokyo) *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • 2.png
  • Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Structural Calculation Software Example │ 5-Story Steel Structure Factory (with Internal Three-Dimensional Warehouse)

Structural Calculation Software Example │ 5-Story Steel Structure Factory (with Internal Three-Dimensional Warehouse)

Planned with a pure frame structure instead of a brace structure! An example where the excavation depth was planned to be as shallow as possible.

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' used for a 5-story steel factory building. This property features two three-dimensional warehouses inside, with the fourth floor having a very high ceiling of 8.5 meters, and a specification that includes equipment platforms in the middle of the floor. Additionally, the areas where equipment is placed and the three-dimensional warehouse section create a void space, resulting in many locations where the rigid floor assumption does not hold. 【Case Study Overview】 ■ Purpose: Factory ■ Structural Type: Steel ■ Number of Floors: 5 ■ Design: Nakano Fudo Construction Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • 2.png
  • 3.png
  • 4.png
  • 5.png
  • Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Structural Calculation Software Example | S-Structure 2-Story Pediatric Clinic

Structural Calculation Software Example | S-Structure 2-Story Pediatric Clinic

The roof is a deformed hip roof! By creating a structural framework on the ceiling surface and using a truss for the roof, the structural plan takes design considerations into account.

This is an introduction to the practical example of the structural calculation software 'Super Build/SS7' used for a two-story steel-framed pediatric clinic. The building is a newly constructed two-story clinic, with a request to aesthetically emphasize the braces, making the proper arrangement of braces essential in the structural planning. The entrance is located at the southeast corner of the building, and from there, the second floor features an L-shaped atrium, creating a sense of openness. 【Example Overview】 ■ Purpose: Pediatric clinic ■ Structural Type: Steel-framed ■ Number of Floors: 2 ■ Design: Mov Structural Design Co., Ltd. (Aichi Prefecture) *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • 2.png
  • 3.png
  • 4.png
  • 5.png
  • 6.png
  • Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Structural Calculation Software Example | S-Type Single-Story Maintenance Factory

Structural Calculation Software Example | S-Type Single-Story Maintenance Factory

The RC slab section on the roof is a rigid floor! Here are examples of the rigid floor being released in the folded plate section.

This is an introduction to a case study of the integrated structural calculation software 'Super Build/SS7' for a single-story maintenance factory made of steel (S construction). The columns are square steel pipes, the beams are H-shaped steel, with 2/3 of the roof being a parking lot (RC slab) and 1/3 being a folded plate roof, and the basic grid is 6.5m x 8.5m. The structural form became a pure frame structure as it was not possible to place effective vertical braces in the design. 【Case Overview】 ■ Purpose: Maintenance Factory ■ Structural Type: Steel Construction (S construction) ■ Number of Floors: 1 ■ Design: Nippon Kensetsu Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • 2.png
  • 3.png
  • 4.png
  • 5.png
  • 6.png
  • 7.png
  • Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Structural Calculation Software Example │ Steel Structure Single-Story Nursery School

Structural Calculation Software Example │ Steel Structure Single-Story Nursery School

The columns are square steel pipes, and both directions have a frame structure! The rigidity of the roof surface is evaluated as horizontal braces.

We would like to introduce an example of the structural calculation software 'Super Build/SS7' applied to a single-story nursery made of steel (S construction). The design features a hyperbolic plane with symmetrically arranged arcs, connected by a roof with a height of 3.0 meters between the hyperbolas. Additionally, the metal sheet roof is treated as a flexible floor under the assumption that the rigid floor assumption does not hold, and the rigidity of the roof surface is evaluated as horizontal braces. 【Example Overview】 ■ Purpose: Nursery ■ Structural Type: Steel (S construction) ■ Number of Stories: 1 ■ Design: Structural FACTORY Co., Ltd. (Fukuoka Prefecture) *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • 2.png
  • 3.png
  • 4.png
  • 5.png
  • Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Structural Calculation Software Examples │ Steel Structure + Reinforced Concrete Structure + Steel Reinforced Concrete Structure 1-Story Ossuary

Structural Calculation Software Examples │ Steel Structure + Reinforced Concrete Structure + Steel Reinforced Concrete Structure 1-Story Ossuary

The exterior wall that also serves as a retaining wall is an RC seismic wall! The adjacent steel columns are modeled as embedded column bases (SRC columns).

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a one-story columbarium constructed with S, RC, and SRC structures. The floor plan is regular, and the roof shape is designed to be a deformed rectangle with an eccentric top. Additionally, the outer walls of the columbarium are made of RC walls (partly serving as retaining walls due to the sloped site), and the steel columns to which the RC walls are attached are designed as encased columns (SRC columns). 【Case Overview】 ■ Purpose: Columbarium ■ Structural Type: S + RC + SRC ■ Levels: 1 floor ■ Design: Structural FACTORY Co., Ltd. (Fukuoka Prefecture) *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • 2.png
  • Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.