Analysis Software Product List and Ranking from 43 Manufacturers, Suppliers and Companies

Electromagnetic Field Analysis Software 【μ-EXCEL Eddy Current Version】

Input the frequency of the excitation coil, and the permeability and conductivity of the material! It can be defined as multiple conductors.

We calculate the magnetic field shielding effect due to eddy currents, as well as the distribution of eddy currents, heat generation distribution, and the amount of heat generated. When defined as multiple conductors, the eddy currents in each conductor can be calculated in a closed state. For details, please refer to "NO.049 ex Eddy Current Number Introduction" on 【Analysis Know-How.com】. Here are the key points: - Input the frequency of the excitation coil, the permeability, and conductivity of the material. - Eddy currents are closed within the conductors. - It can be defined as multiple conductors. - As a result, eddy currents flow in each, reducing losses. - Displays the distribution of the magnetic field, eddy currents, and heat generation. - Outputs the total amount of heat generated (loss amount).

Company：ミューテック
Price：Other

Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

電磁界解析ソフト　【μ-EXCEL　誘導加熱版】

材料特性は磁場解析と温度解析用が必要！高周波コイルは加熱ON/余熱OFFが設定できます！

ＩＨクッキングは誘導加熱原理を使っています。高周波コイルで発生した磁場をお鍋の底に当てると渦電流が発生します、ここまでが磁場解析。渦電流は発熱を起こしお鍋の底からお水へ熱が伝わり温度が上昇します、ここは熱解析。誘導加熱は狙った場所を短時間で加熱できるので、様々なところに利用されています詳細は【解析ノウハウ.com】の「NO.019 ex誘導加熱版の紹介」をご覧くださいポイントはこちら・誘導加熱によりワークの温度変化を見ます・渦電流は磁場解析で求めるのでモデルに空間が必要・渦電流はワーク表面を薄く流れるので、メッシュを細かく・材料特性は磁場解析と温度解析用が必要・高周波コイルは加熱ON/余熱OFFが設定できる

Company：ミューテック
Price：Other

Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Field Analysis Software 【μ-EXCEL Static Magnetic Field Version】

The key is the magnitude of the X component at the position where the Y component crosses zero! It can be done in about 10 minutes from modeling to result display. You can calculate it with the trial version.

The magnetic field distribution analysis of magnetron sputtering was conducted using an axisymmetric model. From the distribution of the magnetic flux density components on the target, we estimate the erosion. The magnitude of the X component at the position where the Y component crosses zero is crucial. This task can be completed in about 10 minutes, from modeling to result display. Furthermore, it can be done with the free trial version of the static magnetic field! Please give it a try. For more details, please refer to NO.020 on "Analysis Know-How.com." You can download the trial version from the sample software on the special site below: https://premium.ipros.jp/mutec/product/detail/2000623620/?hub=148+2991245

Company：ミューテック
Price：Other

Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Field Analysis Software 【μ-EXCEL Thermal Conductivity Edition】

The flow rate of the cooling water is approximated by the heat transfer coefficient! Evaluated with animations and temperature history at evaluation points!

In the heat conduction version, you can define heating elements and cooling pipes. It is a simple analysis, but it allows for easy transient temperature analysis. For details, please refer to "NO.101 Introduction to the Heat Conduction Version: Finding Temperature Distribution and Changes" on 【Analysis Know-How.com】. Here are the key points: - Transient temperature analysis can be performed. - The flow rate of the cooling water is approximated by the heat transfer coefficient. - You can set the heating and non-heating of the heating elements. - Calculations are performed for time steps. - Evaluation is done through animations and temperature history at evaluation points.

Company：ミューテック
Price：Other

Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Field Analysis Software 【μ-EXCEL Mold Cooling Version】

You can see the design of the mold cooling circuit, the cooling process of the pressed products, and the temperature rise process during the insertion and ejection cycle!

μ-Excel is analysis software that uses a two-dimensional (or axisymmetric) finite element method. It consists of individual packages for each analysis theme, allowing for smooth analysis through customized input and output screens for each theme. Additionally, it utilizes Excel macros in its GUI, enabling users to operate it seamlessly within the familiar Excel environment. Furthermore, it can be implemented at a lower cost compared to other analysis software. The academic version is even more advantageous! It is evolving into a wide range of themes, not only for electromagnetic field analysis but also for heat, structure, fluid, and electromagnetic waves. Please look for the series that matches your theme (currently, there are a total of 11 series). 【Features】 - Designed for cooling circuit design of press parts using molds - Settings for initial temperature of press parts, position, number, and heat absorption of cooling pipes on the mold side - Calculation of unsteady temperature during the cooling process after pressing and repeated insertion of new press parts - Ability to set heat transfer coefficients based on pressing pressure - Display of temperature changes *For more details, please contact us or download the PDF.

Company：ミューテック
Price：500,000 yen-1 million yen

Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Field Analysis Software 【μ-EXCEL Eddy Current Version】

Input the frequency of the excitation coil, the permeability and conductivity of the material! It can be defined as multiple conductors.

We calculate the magnetic field shielding effect due to eddy currents, as well as the distribution of eddy currents, heat generation distribution, and heat quantity. When defined as multiple conductors, the eddy currents in each conductor can be calculated in a closed state. For details, please refer to "NO.049 ex Eddy Current Number Introduction" on 【Analysis Know-How.com】. Here are the key points: - Input the frequency of the excitation coil, as well as the permeability and conductivity of the materials. - Eddy currents are closed within the conductors. - It can be defined as multiple conductors. - As a result, eddy currents flow in each conductor, reducing losses. - Displays the magnetic field, eddy current, and heat generation distribution. - Outputs the total heat generation (loss quantity).

Company：ミューテック
Price：Other

Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

電磁場解析ソフト　【μ-EXCEL　静電場版】

誘電体・電極で構成、電荷も設定可！キャパシタンスを求める事も出来ます！

静電場版では誘電体と電極による電位・電場分布を求めます、電荷を指定する事も出来ます。キャパシタンスを求める事も出来ます。詳細は【解析ノウハウ.com】の「NO.025 EX静電場版の紹介」をご覧くださいポイントはこちら・静電場分を見る・誘電体・電極で構成、電荷も設定可・等電位線、電場コンター・電場ベクトル表示・電場・電位グラフ出力・キャパシタンス算出

Company：ミューテック
Price：Other

Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Field Analysis Software 【μ-MRI Magnetic Shielding Room Design Software】

The "μ-MRI" magnetic shield room design software allows you to execute calculations from mesh division with just one button! Complex analyses that are usually difficult can be performed by anyone.

Would you like to conduct a simulation to check if the 5GAUSS line leaks from the room by yourself? We have developed software that is easy to operate, even for construction design personnel who are not familiar with analysis. By setting the room layout and the number of shields, you can simply press the execute button to output the 5GAUSS line drawing. By performing repeated calculations, you can consider the optimal shield arrangement and the minimum number of shields. For more details, please see "062 μ-MRI Introduction" on [Analysis Know-How.com]. Here are the key points: - Dedicated software for MRI shield rooms - Specification of room layout and the number of shields for walls and floors - One-button operation for mesh division and calculation execution - Instant display of the 5GAUSS line - Complex analysis that anyone can perform Additionally: - We provide professional consulting that addresses your issues - We also offer contracted analysis and custom development at a low cost.

Company：ミューテック
Price：Other

Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Field Analysis Software 【μ-EXCEL Orbital Analysis Version】

Consider the ion trajectories in electrostatic and magnetic fields, dielectrics, electrodes, conductors, coils, magnets, magnetic materials, and space charge!

μ-Excel is analysis software that uses a two-dimensional (or axisymmetric) finite element method. The μ-Excel series consists of individual packages for each analysis theme, allowing for smooth analysis through customized input and output screens for each theme. Additionally, it utilizes Excel macros in the GUI, enabling operation in a familiar Excel environment without discomfort. It is evolving into a rich variety of themes, not only for electromagnetic field analysis but also for heat, structure, fluid, and electromagnetic waves. Please look for the series that matches your theme (currently, there are a total of 11 series). 【Features】 - Analysis of electric fields and magnetic fields, and behavior analysis of ion beams in electric and magnetic fields - Start trajectory calculations with mass, charge number, initial coordinates, and initial velocity of charged particles - Calculation of electric fields, potential distributions, magnetic fields, magnetic field lines, and trajectory diagrams - Repulsive forces applied to multiple charged particles *It can be introduced at a lower price compared to other analysis software. The academic version is even more advantageous! *For more details, please contact us or download the PDF.

Company：ミューテック
Price：500,000 yen-1 million yen

Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Field Analysis Software 【μ-EXCEL Synchronous Motor Characteristics Version】

An easy-to-use, low-cost analysis software based on Excel. A subscription is also available for 9,800 yen per month (excluding tax).

The "μ-Excel Motor Characteristics Edition" is an easy-to-use motor design tool that can output the static characteristics of motors, including torque-speed and current curves, as well as torque-output and efficiency curves. You can easily create motor models using model templates. It calculates the torque constant from finite element method results and outputs characteristic curves. We also offer a subscription service available for 9,800 yen per month (excluding tax). We encourage you to consider adopting it! 【Do you have any of these concerns in motor design?】 - It seems difficult to master the software. - Creating motor models is cumbersome. - I think finite element method calculations are necessary. - The cost of software implementation seems too high. - I would like consulting services as well. 【With μ-Excel Motor Characteristics Edition!】 ■ You can perform calculations using familiar Excel operations. ■ You can easily create motor models with model templates. ■ It accurately calculates magnetic field distribution through finite element method magnetic field analysis. ■ You can use our subscription service for 9,800 yen per month (excluding tax). ■ We provide backup by teaming up with motor design professionals.

Company：ミューテック
Price：Less than 10,000 yen

Other Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Field Analysis Software 【μ-EXCEL Static Magnetic Field Version】

The key is the magnitude of the X component at the position where the Y component crosses zero! It can be done in about 10 minutes from modeling to result display. You can calculate it with the trial version.

The magnetic field distribution analysis of magnetron sputtering was conducted using an axisymmetric model. From the distribution of the magnetic flux density components on the target, we estimate the erosion. The magnitude of the X component at the position where the Y component crosses zero is crucial. This process can be completed in about 10 minutes, from modeling to result display. Furthermore, it can be done with the free trial version of the static magnetic field! Please give it a try. For more details, please refer to NO.020 on "Analysis Know-How.com." You can download the trial version from the sample software on the special site below: https://premium.ipros.jp/mutec/product/detail/2000623620/?hub=148+2991245

Company：ミューテック
Price：Other

Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Field Analysis Software 【μ-EXCEL Thermal Conduction Version】

The flow rate of the cooling water is approximated by the heat transfer coefficient! Evaluated using animations and temperature history at evaluation points!

In the heat conduction version, you can define heating elements and cooling pipes. It is a simple analysis, but it allows for easy transient temperature analysis. For details, please refer to "NO.101 Introduction to the Heat Conduction Version: Finding Temperature Distribution and Changes" on 【Analysis Know-How.com】. Here are the key points: - Transient temperature analysis is possible. - The flow rate of cooling water is approximated by the heat transfer coefficient. - You can set the heating and non-heating of the heating elements. - Calculations are performed for time steps. - Evaluation is done through animations and temperature history at evaluation points.

Company：ミューテック
Price：Other

Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Field Analysis Software 【μ-EXCEL Basics of Electromagnetic Field Analysis / Materials】

Electromagnetic phenomena, Maxwell's equations, and examples of analysis using the finite element method! Explained with illustrations and diagrams.

This document introduces the world of electromagnetic simulation, covering electromagnetic phenomena, Maxwell's equations, and examples of analysis using the finite element method. It is an excerpt from "Analysis Know-How.com," a video site for analysis know-how by μ-EXCEL. We provide clear explanations using illustrations and graphs. Please take a moment to read it. 【Contents】 ■ Electromagnetic phenomena ■ Maxwell's equations ■ Vector operations ■ Numerical calculations ■ Finite element method ■ Motor analysis ■ Other analyses 【We have launched Analysis Know-How.com (https://mu-excel.com)!】 - In the "Home" menu, you can find a list of know-how collections. - The "View Details" button provides know-how points and videos. - The "Category" menu allows you to filter by genre and series. - Use "Search by Keyword" to further narrow down related videos. - In the "Blog," we will introduce updated videos as they become available. ★ You can download sample software from the link below. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミューテック
Price：Other

Other biomass

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Field Analysis Software 【μ-EXCEL Mutech Rakuten Market Store】

Familiar operability based on Excel. Full-scale thermal, structural, and electromagnetic field analysis available for subscription at a low price. *Benefits included.

"μ-Excel" is an affordable thermal, structural, and electromagnetic analysis software. It operates on Excel, allowing for a familiar user experience while enabling sophisticated simulations. It is structured in a series based on different analysis themes, with dedicated macros for each, making it easy to use. You can purchase the subscription version of this product at the newly opened Mutech Rakuten Ichiba store. 【Features】 ■ Input and output data are stored in sheets, allowing for flexible data processing. ■ Implements necessary tools such as modelers and meshers for finite element analysis. ■ Easy condition setting, with results obtainable in just a few minutes. ■ Utilizes 2D or axisymmetric finite element methods. ■ Equipped with DXF import functionality and a material database feature. *For more details, please download the PDF or feel free to contact us. ★ We are celebrating the grand opening of the Mutech Rakuten Ichiba store! ★ ・Eligible product: μ-Excel Subscription New 3-Month License ・Benefit: 2000 yen OFF coupon ・Period: February 8, 2022 (Tuesday) 10:00 to March 1, 2022 (Tuesday) 9:59

Company：ミューテック
Price：Other

Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Field Analysis Software 【μ-EXCEL Analysis Know-How Video Site】

The video contains compact content of about 1 to 2 minutes! You can easily check the topics you want to know using your smartphone or other devices.

"Analysis Know-How.com" is a website that collects videos introducing the benefits of the analysis software μ-EXCEL, provided by Mutech, which is easy, fast, and suitable for initial assessments. The videos are compact, lasting about 1 to 2 minutes, and allow for filtering searches by keywords and categories. You can easily check the items you want to know using your smartphone during your spare time. In the "Home" menu, you can find a list of know-how collections. By clicking the "View Details" button, you can view the key points of the know-how and the videos. In the "Category" menu, you can narrow down by genre or series. With "Keyword Search," you can further refine related videos. In the "Blog," we will introduce updated and additional videos as they become available. μ-EXCEL is available as a subscription service for 9,800 yen per month (excluding tax). Additionally: - We offer professional consulting that delves into your issues. - We also provide contract analysis and custom development at a low cost. For more details, please feel free to contact us.

Company：ミューテック
Price：Other

Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis Software Product List and Ranking from 43 Manufacturers, Suppliers and Companies

Analysis Software Manufacturer, Suppliers and Company Rankings

Analysis Software Product ranking