Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.
451～480 item / All 910 items
Manual Endless Winch Main Unit (750kg) / Part Number MC13EW-TFT7K
Vertical, horizontal, diagonal... This is a manual endless winch that can be pulled in any direction, with no limitations on the length of the wire rope. The wire rope can be easily set with just one lever operation.
Orion Machinery/Chiller. Achieves up to 57% energy-saving control.
■ Achieves up to 57% energy-saving control Operation is possible with minimal energy according to the load. *Compared to HB control at 30% load. ■ High-precision liquid temperature control enabled by proprietary technology Control of the compressor speed based on liquid temperature detection achieves a setting temperature control of ±0.2 to ±1.0℃*. *This may vary depending on load conditions, so please consult us if high precision is required. ■ Wide range of liquid temperature control available Liquid temperature settings can be freely adjusted within the range of 5 to 35℃. ■ Standard external communication function Temperature control is possible via RS232C and RS422.
Adoption of a new refrigerant/HFO-1234yf that is not subject to the Fluorocarbon Emission Control Law. Significantly reduces fluorocarbon management workload, achieving high precision and energy savings with three inverter controls.
The non-Freon inverter chiller RKE1500C-VRA adopts the new refrigerant HFO-1234yf, reducing environmental impact and user burden. HFO-1234yf is exempt from inspection obligations under the Fluorocarbon Emission Control Law and recovery obligations upon disposal, allowing for significant reductions in management and disposal costs that were burdensome with traditional Freon refrigerants. Additionally, the ozone depletion potential (ODP) is zero, and the global warming potential (GWP) is less than 1, significantly lower than conventional R32 and R410A, making it environmentally friendly. (As of June 2022) In terms of energy efficiency, the inverter controls the rotation speeds of the compressor, fan, and pump, allowing operation with the minimum necessary power. This contributes to reductions in CO2 emissions and running costs by decreasing power consumption in response to changes in load rates. *There is also the RKE-C-VRB series that uses refrigerant R513A.
High-performance, space-saving high-spec chiller.
【Chiller equipped with TESC】 The power consumption ratio changes with the variation in load rate. The RKE2200C-V, equipped with TESC, can further reduce power consumption compared to conventional models. 【Enables wall-mounted installation and space-saving installation】 Compared to conventional models, the product installation area has been reduced by 36%. Additionally, it allows for intake and exhaust, piping, and wiring connections from the sides, enabling wall-mounted installation. 【Significantly reduces environmental impact by adopting refrigerant R32】 Contributes to achieving carbon neutrality. Compared to conventional models filled with R410A, it can reduce CO² emissions (equivalent value) by approximately 70%.
Pursuing energy efficiency and reliability!
■High-efficiency operation ■Can be installed in harsh environments ■Reduction of environmental impact ■Space-saving installation possible ■Equipped with TESC for high precision and energy saving ■Standard energy-saving operation mode ■Equipped with an intelligent touch panel ■Low operating noise design
Achieving up to 57% energy-saving control! High-precision liquid temperature control is possible with proprietary technology.
- Compressor inverter control - Built-in pumping pump It has a built-in pumping pump to supply water to the customer's equipment (closed circuit). - External signal terminals Equipped with operation signal terminals, alarm signal terminals, and remote control terminals. - Equivalent to IPX4 It can be installed outdoors. Consideration is required for direct sunlight, strong winds (over 8 m/s), snowfall, and freezing. IPX4 refers to a grade regarding water intrusion, indicating that it is resistant to harmful effects from water splashes from any direction at a rate of approximately 10L/min. - Remote control compatible (optional) All operations that can be performed by this unit can be remotely controlled with the installation of a remote control (optional).
Achieves energy-saving control of up to 57%※. High-precision liquid temperature control is possible with proprietary technology.
- Extensive liquid temperature control is possible. Liquid temperature can be set arbitrarily within the range of 15 to 30°C. - Standard external communication function equipped. Temperature control is possible via RS232C and RS422. (Only for RKE22000A-VW)
Support for the manufacturing of "brass fittings"! We will propose tools for processing.
Yamada Machine Tool, which handles machine tools and various tools, offers suggestions for processing tools used for brass fitting parts. Traditionally, marking was done manually after machining, but by implementing marking within the lathe, the process can be streamlined. Additionally, by using a "polygon cutter" that can be utilized on four corners, it leads to a reduction in tool costs. 【Proposal Details】 ■ Marking within the lathe ■ Polygon cutter usable on four corners ■ Open-type die head with quick return *For more details, please refer to the PDF document or feel free to contact us.
Ideal for precision knurling! Used in many industries, including the automotive sector!
Features of the QUICK Knurling Tool The QUICK knurling tool is a cutting-type knurling tool developed through years of experience and research by the QUICK brand, fundamentally changing the traditional knurling process that uses pressing and rolling. It is a unique knurling tool that is now distributed to users around the world, demonstrating its effectiveness. In Japan, it has a history of over 30 years since its release and continues to accumulate various know-how. The QUICK knurling tool series can be attached to lathes for use. Since it is used for cutting, which is the purpose of a lathe, the load is smaller compared to pressing and rolling, minimizing stress on materials and machines. It can also process materials that are impossible to roll. Another feature is that the high rotation speed results in shorter processing times. The sharp finish of the peaks leads to a cleaner result compared to plastic deformation. This not only reduces processing and setup times but also dramatically improves quality. *For more details, please refer to the PDF document or feel free to contact us.*
When cutting knurling tools cannot be used, there are rolling knurling tools available.
We receive inquiries every day from customers looking for knurling tools. A common question is whether cutting or rolling is better. We primarily recommend cutting, as it provides a nice finish and is relatively easy to set up. However, there are workpieces where cutting knurling tools cannot be used. In such cases, we recommend rolling knurling tools. Rolling knurling tools can handle knurling on the intermediate sections of workpieces and processing at step edges, which is difficult with cutting knurling tools. *For more details, please refer to the PDF document or feel free to contact us.*
Broaches for machining difficult-to-cut materials such as Inconel, Hastelloy, and titanium alloys.
The broaching tool from Raikotsuru is designed to be attached to the broach holder from PCM. It has the same φ8 shank specification as conventional tools, allowing it to be attached and used in the same way as before.
Direct fuel supply hose-less coolant through bite
It's not just about inner diameter and grooving processes. Outer diameter processing results can also change depending on how coolant is applied. With PSI Turn, anyone can apply coolant precisely to the cutting edge. This is effective in improving chip removal issues and reducing the frequency of tool changes. PSI Turn was developed to safely advance the machining process and increase productivity through internal lubrication processing. It can accurately supply coolant to the cutting edge from two directions: the relief face and the rake face, making chip removal easier and helping to suppress wear. The head is designed to be as compact as possible, reducing the risk of chips wrapping around it.
As an auxiliary tool to prevent the supporter from idling when installing our company's supporter.
【Features】 ■ By inserting and securing the pins of this product into the pin holes on the top surface of the supporter, it prevents the supporter from spinning freely and improves installation efficiency. ■ It can be used even when there is no space on the side of the supporter. ■ It can be attached to tools such as your existing 6.35mm (1/4 inch) hex shaft driver. *For more details, please refer to the PDF document or feel free to contact us.
Module m 0.2 to m 8.0 compatible, achieving high precision and high efficiency in gear processing.
【System WSA】 Carbide Solid Minimum Module m 0.2 ～ ■ Compatible with small diameter machining (φ 7.0mm ～) ■ Precision cutting edge grinding finish using a 5-axis NC grinding machine (compatible with PS/PSP tooth shapes) 【System WSR】 Replaceable Cutting Edge Maximum Module ～ m 8.0 ■ Interface achieving high-level concentricity (patented) ■ Coolant supply possible from the rake face side (optional) 【System M117】 Insert Replaceable Maximum Module ～ m 8.0 ■ Adopts an automatic centering type insert seat ■ Cutter arbor compatible with various spindle interfaces 【Gear Broaching System N105, N110, S117】 Replaceable Cutting Edge Maximum Module ～ m 5.0 ■ Manufacturing of external and internal gears possible with a single machine such as an NC lathe or multi-tasking machine 【Gear End Face Deburring Tool System DSS】 Carbide Solid ■ One-chucking processing of gear skiving + deburring possible with multi-tasking machines and 5-axis machining centers ■ Deburring can be done in about 2 seconds
Easily exchange the grit with Velcro! A deburring tool that can be used in any direction—vertical, horizontal, or diagonal—like a "finishing file."
The detachable grip holder can be used to grind in any direction: vertically, horizontally, or diagonally. It is a deburring product similar to a "wide finishing file." It has high cushioning and functionality, using ultra-strong industrial Velcro, allowing for easy replacement with other grit diamonds. Secondary burrs on the C surface can be quickly removed, and stubborn burrs can be ground away. Achieve a beautiful finish with this innovative diamond grinding stone. The innovative dot-shaped diamonds provide excellent cutting performance. It can be used for a wide range of applications, including fine burr removal, scratch removal from products, flattening after hardening, removing steps after machining, and removing dents from products and materials. Demo units are also available. Please feel free to contact us.
Insert with chip breaker for groove cutting and side cutting that contributes to reducing chatter and tool wear! A machining tool that eliminates chip clogging.
Do you have any of these concerns regarding inner diameter processing? "Frequent occurrences of chip clogging in the inner diameter" "I'm struggling to find tools that can process deep grooves while maintaining rigidity" At IZUSHI, we offer a wide range of inner diameter grooving tools, specifically the 'Mini' inner diameter grooving insert from the German manufacturer HORN, which specializes in grooving tools. 【Features】 ■ High rigidity and stable processing enabled by a unique six-sided clamping mechanism ■ Internal lubrication system that reliably supplies coolant to the cutting edge ■ Secure clamping guaranteed with a single screw tightening ■ One holder can accommodate various processing and groove widths within the same system ■ Compatible processes: grooving, boring, threading, end face grooving, chamfering - Minimum pilot hole diameter: φ 6.0 mm to φ 18.0 mm - Insert width: 0.7 mm to 3.0 mm - Maximum groove depth: 0.8 mm to 8.0 mm Examples of improved cutting conditions, tool life increased by over 10 times, and processing time reduced by approximately 46% can be found in the PDF download. *For more details, please download the PDF or contact us directly.
It is possible to achieve high precision and high efficiency processing.
■Thread Warring - High-efficiency medical screw machining using a warring unit - S271 2-corner insert (blank width: 4.1, 5.1, 6.1 mm) - S302 3-corner insert (blank width: 4.4, 5.4, 6.1, 7.5 mm) - The upper rake face is precisely polished to avoid the cutting edge configuration - Excellent surface finish achieved with cutting edges free of micro defects - Corner R is 0.02 mm, suitable for very sharp medical screws ■Innovative Machining Method (Refer to machining video for details) - Synchronizing workpiece rotation and tool rotation for machining - Rotary eccentric turning machining with a rice ball-shaped cutter for rice ball-shaped profiles - High-speed warring milling to manufacture variable pitch double-thread screws (male screws) - Polygon machining of the screw head portion
加工方法や注意点をまとめてご紹介！高精度な六角穴加工が必要な方必見
今回の削レポ(けずレポ)はブローチング工具で六角ソケット加工を 行いました。加工方法や注意点などをまとめてみました。 ステンレス材で高精度な六角穴加工が必要な方必見の内容になっています。 旋盤で六角穴加工ができるというのも魅力の1つでして、工程集約や 生産性の向上にもなればと考えています。 当六角穴加工についてのオリジナル解説動画もございます。加工改善の 参考にしていただければ幸いです。 ※コラムの詳細内容は、関連リンクより閲覧いただけます。 詳しくは、お気軽にお問い合わせ下さい。
Achieve beautiful finishes and processing efficiency! High-precision knurling tools for rolling and cutting processes - IFANGER.
IFANGER's knurling tools are designed to achieve high-precision knurling processing. They efficiently form anti-slip and decorative patterns on metal surfaces, ensuring stable processing accuracy. These high-precision tools are utilized in a wide range of industrial applications, including knurling on lathes, precision parts processing, and the manufacturing of knobs and handles. 【Features】 ■ A lineup of various tools for rolling and cutting processes ■ Capable of processing small-diameter workpieces ■ Various coated inserts are available For more details, please refer to the catalog or feel free to contact us.
One-touch connection with high flow rate. Excellent strength and durability!
The eSafe Series 315 offers excellent strength and durability while being lightweight and allowing for one-touch connection. Thread sealant is pre-applied to the male threads of the coupling and nipple. It employs a two-step method for separation, where you simply pull the sleeve and push to remove residual pressure before separating the nipple, preventing sudden disconnection and prioritizing the safety of the operator. It complies with international safety standards such as ISO 4414 and EN 983. Standard, soft line, and multi-link types are also available. For more details, please contact us or refer to the catalog.
This is a set of pins for storing an arm crane hook and a lynch pin to secure it!
Arm crane pins, lynch pins, and R pins are available for individual supply. We have a wide range of products available. 【Features】 - A set of pins for storing the arm crane hook and the lynch pin to secure it - Arm crane pins, lynch pins, and R pins are available for individual supply - A wide range of products available *For more details, please refer to the PDF document or feel free to contact us.
We have created a kit of O-rings in sizes commonly used for the maintenance of Caterpillar construction machinery!
Maxis Corporation offers the O-ring kit '4C-4782' for CAT. It comes with a handle, making it convenient for transport to the job site. Packaged in a dedicated plastic storage case, each size is organized separately, allowing for efficient work progress. 【Features】 ■ 570 pieces in 32 varieties ■ Packaged in a dedicated plastic storage case ■ O-rings are stored by size ■ Convenient for transport to the job site with a handle ■ Made from NBR90 rubber material that can withstand high pressure in hydraulic equipment *For more details, please refer to the PDF document or feel free to contact us.
![Hydraulic excavator revo frame repair material [Reduced work burden & cost reduction]](https://image.www.ipros.com/public/product/image/4a0/2000610990/IPROS41121067804268038745.png?w=280&h=280)
Reduce the workload so far! No need for processes like putty filling or polishing!
Maxis Corporation handles "Revo Frame Repair Material." There is no need for processes such as hammering from the inside, applying putty, or polishing. Of course, there is no need to process the steel material either. This product reduces the workload of previous tasks. 【Lineup】 ■SK200-8/9 ■PC200-8/10/11 ■320D *For more details, please refer to the PDF document or feel free to contact us.
Can remove snow without damaging the pavement!
Urethane edge, three benefits ■ Since it is made of urethane, it can clear snow without damaging the road surface. ■ It can be easily processed, making installation a breeze. ■ It won't break even if it hits obstacles like manholes.
Overlay the bands and apply pressure while rubbing! This will definitely achieve a high adhesive strength.
We would like to introduce the "Hand Tools (Strapping Machine)" handled by Sekisui Chemical Co., Ltd. Starting with the cordless type "BXT3-16/BXT3-19," which allows for tension adjustment, we also offer the "BXT3-13," designed specifically for PP bands suitable for light to medium packaging, and the manual winding type "BHC3," which maintains uniform tension through a torque limiter, among a rich lineup. Using heat to melt and bond the strap through "vibration fusion," there is no need for heat kneading technology, ensuring a reliably high bonding strength. 【Features of BXT3-16/BXT3-19】 ■ Electric tightening and fusing ■ Switchable between auto and manual modes ■ Adjustable fusing time according to the type of strap ■ Adjustable tension ■ Long lifespan with lithium-ion battery ■ Cordless type, lightweight, and designed for ease of operation *For more details, please refer to the PDF document or feel free to contact us.
A hybrid air tool with a ratchet mechanism and impact clutch!
The "Ratchet Impact" is a tool for attaching and detaching screws that can tightly fasten screws and allows for manual tightening. It is a hybrid air tool that combines a ratchet mechanism with an impact clutch. 【Features】 ■ 2.5 times faster feeding speed for small screws ■ Equipped with an impact clutch ■ Reduced reaction force after screw seating ■ Low noise during tightening *For more details, please refer to the PDF document or feel free to contact us.
Ideal for tightening work in narrow spaces! Suitable for disassembly tasks in automotive sheet metal work, etc.
The "Air Ratchet Wrench" is a tool for fastening and loosening screws that combines an air motor, a planetary gear reduction mechanism, and a ratchet mechanism. It can apply strong torque to screws, and re-tightening can be done manually. Due to its compact and lightweight design, it is ideal for tightening tasks in narrow spaces and achieves five times the efficiency compared to manual work. 【Features】 ■ Compact and lightweight, effective for use in tight spaces ■ Does not overtighten or damage screws ■ Achieves five times the efficiency compared to manual work *For more details, please refer to the PDF document or feel free to contact us.
Compatible with both wireless and wired! A high-precision dynamometer that can be used in combination with a communicator.
"EDxtreme" is a high-precision dynamometer with an accuracy of ±0.1% of full scale. It can be used alone or in combination with a communicator (remote display device). The communicator is compatible with both wireless and wired connections, allowing for unrestricted usage locations. The communicator can display up to 5 units simultaneously and can be used with up to 63 sets within the same area. [Features] ■ Accuracy of ±0.1% of full scale ■ Usable alone or in combination with a communicator ■ Compatible with both wireless and wired connections ■ The communicator can display up to 5 units simultaneously *Due to the impact of the COVID-19 pandemic, the timing of arrivals may be unstable. Please check with us for details. *For more information, please refer to the PDF document or feel free to contact us.
