Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
226～240 item / All 1247 items
Foot switch: OFL-VG5-S6 (Ojidens)
<S6 Shape Series> - Operating Characteristics: Momentary - Rating: 0.1A-30V DC - Contact Configuration: 1C - Included Cable: VCTF0.75X3CX2M - Weight: Approximately 580g (body only) - Built-in Switch IP67 rated - Optional Item: Stainless Steel Protective Cover "OFL-CS"
Footswitch: OFL-R-S7 (Ojidens)
<S7 Series> - Operating characteristics: Momentary - Rating: 0.5A-220V AC (inductive load) - Contact configuration: 1a - Included cable: VCTF0.75X2CX3M - Weight: Approximately 290g (body only) - Protection rating: IPX7 - Optional item: Stainless steel protective cover "OFL-CS"
Operation switch: OFL-S-H2-color (Ojidene)
<H Shape Series> - Operating characteristics: Momentary - Rating: 6A-250V AC - Contact configuration: 1a - Included cable: VCTF10.75X2CX1.5M - Weight: Approximately 230g (main unit only) - Color: White, Yellow, Red, Green, Black
Footswitch: OFL-1-SM2K (Ojidens)
<SM2 Series> - Operating characteristics: Momentary - Rating: 10A-250V AC - Contact configuration: 1C - Included cable: VCTF1.25X3CX1.5M - Weight: Approximately 1800g (body only)
Foot switch: OFL-1-SM2KS (Ojidens)
<SM2 Series> - Operating characteristics: Momentary - Rating: 10A-250V AC - Contact configuration: 1C - Included cable: VCTF1.25X3CX1.5M - Weight: Approximately 2200g (body only) - Cover with safety lid (KS)
Foot switch: OFL-TW-SM2C (Ojidens)
<SM2 Series> - Operating characteristics: Momentary - Rating: 10A-250V AC - Contact configuration: 1C on each side - Included cable: None (sold separately) - Weight: Approximately 2800g (body only) - Double switch type
Tape switch. Voltage resistance: AC500V, contact life: over 1 million times!
<Tape Switch> - Rated Voltage/Current: AC/DC 28V-1A - Dielectric Strength: AC 500V (for 1 minute) - Contact Life: Over 1,000,000 cycles (with relay load of 24V-0.3A) - Operating Force: Approximately 2.2N to 27N (φ15 pressing plate) - Insulation Resistance: Over 100MΩ (measured with DC 500V megger) - Contact Resistance: Below 1.0Ω (when above operating force) - Operating Temperature Range: -10℃ to +60℃ - Load Capacity: 150kg (for 1 minute with φ100 pressing plate) - Waterproof: Sealed drip-proof type (equivalent to IP54) - Lead Wire: VFF 0.75X0.5M included (standard configuration) - Made to Order Product
Aluminum die-cast dual foot switch. For industrial, medical, equipment, and measuring instruments, etc.
<OFL Basic Shape Series> ・2-pedal foot switch ・Operating characteristics: Momentary ・Rated: 10A-250V AC ・Contact configuration: 1C on each side ・Included cable: VCTF1.25X6CX1M ・Weight: Approximately 1,650g (main unit only)
Foot switch with intermediate socket made of ABS. For industrial, medical, equipment, and measuring instruments.
<M4 Series> ・Operating characteristics: Momentary ・Rating: 6A-125V AC ・Contact configuration: 1a ・Included cable: VCTFK1.25X2CX2.5M ・Weight: Approximately 280g (body only)
Each 1c contact / without protective cover! It is possible to change the operating mode in 4 patterns!
The "OFL-TW-FS" is a series of aluminum die-cast rocker foot switches with each having 1c contact and no protective cover. The rocker foot switch has a hinge shaft in the center of the pedal, making it suitable for operations such as forward/reverse and up/down. Additionally, by changing the orientation of the built-in cam, the operating mode can be changed to 4 different patterns. 【Features】 ■ Hinge shaft in the center of the pedal ■ Suitable for operations such as forward/reverse and up/down ■ Each has 1c contact and no protective cover *For more details, please refer to the PDF document or feel free to contact us.
Foot switch: OFL-V-SM2KS4 (TUV・CE) (Ojidens)
<SM2S4 Shape Series> - Foot switch with safety lock lever - TUV certified product - CE compliant product - Operating characteristics: Momentary - Rating: 10A-250V AC - Contact configuration: 1C - Attached cable: Optional - Weight: Approximately 1840g (body only)
Effective as a collision detection sensor for automatic doors, various machines to prevent pinching, emergency stops for medical devices, and other unmanned vehicles (bumpers)!
The bumper switch "Sensing Edge" is an effective collision detection sensor for automatic doors (elevators, vehicles, residential doors, high-speed shutter doors), various machines to prevent pinching, emergency stops for medical devices, and other unmanned vehicles (bumpers). We recommend using a 4-wire control circuit (break detection device) as standard. In this case, a 4-wire lead is required. We accept orders for lead lengths (L), drawing directions, and classifications of "single output" or "double output" from one unit. 【Typical Structure】 ■ All types come with F channel, standard product ■ Long channels can be used in combination ■ Channels are to be installed after separate drilling ■ Built-in tape switch replacement is also easily interchangeable ■ Vertical bending processing of approximately R100 (or more) is possible *Only for OT-08D-B *For more details, please refer to the PDF materials or feel free to contact us. ★ We will be exhibiting at the "2019 International Robot Exhibition" starting on December 18. Please refer to the basic information for the exhibition overview.
Installed on various movable devices to prevent accidents before they occur. *Custom product
The "Bumper Switch" is a product designed to be installed on unmanned transport vehicles, medical and nursing-related robots, large X and Y tables, and various movable devices to prevent accidents before they occur. Since the bumper switch is a custom product, please provide specifications through drawings. 【Features】 ■ Unmanned transport vehicles ■ Medical and nursing-related robots ■ Large X and Y tables ■ Various operating devices, etc. *For more details, please refer to the PDF materials or feel free to contact us.
For creating a safe area. Oil-resistant rubber used, surface muscle pattern rubber type.
The "OM-1074" is a four-wire mat switch made from oil-resistant rubber. It can be widely used to prevent dangers in areas such as around industrial robots, NC machine tools, restricted zones, automatic doors, and security applications. It features a long-lasting, highly reliable tape switch built-in. Additionally, it can be repaired in case of damage or disconnection. 【Features】 ■ Standard stock item ■ Oil-resistant rubber ■ Pattern is ribbed rubber ■ Size is 700×1000×14 ■ Lead wire is 1.5m from the top right corner *For more details, please refer to the PDF document or feel free to contact us.
Directly, for indoor use as a mat switch! Slim mat switch CVP series.
The "OM-CVP723" is a thin mat switch with a thickness of 4.4mm, featuring excellent drip-proof and durability properties. By placing it under carpets or mats, it serves as a hidden switch, making it effective for security and detection purposes. It can be widely used as a bed exit sensor in hospitals and nursing facilities, as well as for wandering detection mats, security detection sensors, and security camera activation switches. 【Features】 ■ UL certified product ■ Rated voltage/current: AC/DC 28V-1A ■ Thin profile of 4.4mm ■ Excellent drip-proof and durability ■ Can be used directly or placed under mats and carpets *For more details, please refer to the PDF document or feel free to contact us.
