stand×イマダ - List of Manufacturers, Suppliers, Companies and Products

stand Product List

1～14 item / All 14 items

Displayed results
Long Stroke Manual Load Measurement Stand "HV Series"

Long Stroke Manual Load Measurement Stand "HV Series"

Ideal for measuring the load of large or elongated samples with a long stroke! This is a vertical manual measurement stand that allows for stable measurements with handle operation.

The HV series is a manual measurement stand designed to be used in combination with Imada's force gauge (load measuring device). Among Imada's manual measurement stands, it is designed with a long stroke, making it ideal for measuring long or extensible samples. 【Features of the HV Series】 - The head has a wide operating range, allowing for the measurement of various samples. - Stable load measurement is possible with handle operation. - Options for stroke extension and the attachment of measuring devices are available. ■ For Imada's force gauges, please refer to the related products at the bottom of the page. ■ We also offer software that is convenient for graph creation and data analysis. For more details, please visit our website. At Imada, we offer a wide range of manual and electric measurement stands to meet the measurement needs of our customers. ▼ Please check the following URL for an introduction to our lineup of measurement stands.

  • Other analytical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-Performance Type Electric Measurement Stand 'EMX Series'

High-Performance Type Electric Measurement Stand 'EMX Series'

Easy operation, compatible with a wide range of tests! Automatically detects contact points according to the sample size!

The "EMX Series" is a high-end electric measurement stand that balances precise measurement with ease of use. It includes the "EMX-500N" and "EMX-1000N," which can accommodate a wide range of measurement conditions with speeds from 0.5 to 600 mm/min. The displacement can be set in increments of 0.1 mm, allowing for compression and tensile tests at a specified distance from the contact point. Designed for precise measurement with high rigidity and smooth operation, it exhibits minimal deflection under load, making it effective for measuring not only load but also displacement. 【Features】 ■ Uniform direction and speed for compression and tension ■ Design with the highest rigidity and minimal deflection (maximum 0.25 mm) ■ Smooth operation with ball screws ■ Digital displacement limit setting in increments of 0.1 mm ■ Easy setup mode for straightforward configuration of test conditions *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Standard Type] Horizontal Electric Measurement Stand 'MH2 Series'

[Standard Type] Horizontal Electric Measurement Stand 'MH2 Series'

[Load Measurement] An electric stand capable of applying horizontal load! Easy to set speed and repetitions.

The "MH2 Series" is an electric measurement stand with a horizontal model that makes it easy to set up sample sets. It achieves consistent measurements with constant speed and direction, ensuring high reproducibility. Measurement modes and speeds can be easily set digitally. It has realized a variety of functions in conjunction with a force gauge. 【Features】 ■ Capable of applying load from a horizontal direction ■ Smoothly set up samples and force gauges ■ The test speed can be digitally set, allowing for more accurate and stable measurements ■ By setting the number of cycles and the time to hold the load, durability testing is possible ■ During durability testing, the speeds for the forward and return trips can be set separately ■ Overload prevention features and control based on set loads (load control) are implemented 　*Conditions apply *For more details, please refer to the PDF materials or feel free to contact us.

  • Other analytical equipment
  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simple Manual Measurement Stand 'SVL-1000N/SVH-1000N'

Simple Manual Measurement Stand 'SVL-1000N/SVH-1000N'

"Simple type" force gauge can be attached, making it usable as a manual simple testing machine! Achieves highly reproducible measurements.

The "SV Series" is a measurement stand that allows for tensile and compression measurements of up to 1000N when used with a force gauge. By standardizing measurement conditions, it enables highly reproducible measurements. Load measurements can be easily performed using lever or handle operation. We offer the lever-type "SVL-1000N" for those looking to improve work efficiency, and the handle-type "SVH-1000N" for those who want to precisely control the movement amount. 【Features】 ■ Capable of tensile and compression loads up to 1000N ■ Stroke adjustment possible with a mechanical stopper ■ Supports a wide range of measurements with various options ■ Compact and lightweight design for easy portability 【Individual Features】 ■ Advantages of the lever-type "SVL-1000N": Easy measurement with lever operation. Suitable for those looking to enhance work efficiency. ■ Advantages of the handle-type "SVH-1000N": Suitable for those who want to frequently adjust the measurement movement amount with the handle. (3mm per rotation) *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small Manual Measuring Stand 'KV-50N'

Small Manual Measuring Stand 'KV-50N'

Fine adjustments can be made by rotating the knob! It is compact and lightweight, making it easy to carry.

The "KV-50N" is a compact manual measurement stand that allows for fine adjustments by rotating the knob. With a body weight of approximately 2kg and a compact design, it can be easily transported even with a force gauge attached. The movement amount is 1mm per rotation of the knob, enabling precise adjustments. Additionally, it can be customized for various specifications to suit measurements, such as adding a length measuring device (optional) or changing the table stroke (custom order). 【Features】 ■ Easy to transport ■ Allows for fine adjustments ■ Supports a wide range of measurements with various options and customizations *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-performance electric torque stand "ACMTS Series"

High-performance electric torque stand "ACMTS Series"

It is an electric torque stand that enables operation control based on torque values and angles, as well as torque-angle measurement! It improves measurement reproducibility.

The ACMTS series is an electric torque stand designed to be used in combination with the Imada-made screw cap torque meters DTXS/DTXA series. It can equalize the rotation speed, improving the reproducibility of torque measurements. **Features of the ACMTS Series** - Equipped with angle input/output functionality, allowing for angle-torque measurements. - Capable of controlling operations based on torque values and angles. It can also conduct durability tests that repeat the same cycle. - Offers a wide speed range, accommodating various measurements. - A variety of optional attachments are available for different combinations based on samples. - Optional software is also available for plotting torque-time and torque-angle graphs. ■ For Imada-made screw cap torque meters, please refer to the related products at the bottom of the page. ■ There is also a "Torque-Angle Measurement Unit TAA-ACMTS Series" that includes all necessary products for torque-angle measurements. For more details, please refer to the PDF materials or contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Measurement Reproducibility: Vertical Electric Measurement Stand for Load Measurement 'MX Series'

High Measurement Reproducibility: Vertical Electric Measurement Stand for Load Measurement 'MX Series'

Achieve highly reproducible load measurements by standardizing speed and direction! This is a simple type of measurement stand with excellent cost performance.

The MX series is an electric measurement stand designed to be used in combination with Imada's force gauges (load measuring devices). It is a product that focuses on essential functions to keep costs down among Imada's electric measurement stands, boasting high cost performance. **Features of the MX Series** - It can standardize the speed and direction during measurement, achieving highly reproducible load measurements. - It is capable of handling various measurements such as tensile tests, compression tests, and peel tests. - By connecting to a force gauge with a communication cable, it enables operation control based on load values and prevents overload. ■ For Imada force gauges, please refer to the related products at the bottom of the page. ■ We also offer software that is convenient for graph creation and data analysis. For more details, please visit our website. *On our website, we have published various load measurement videos using Imada products. ▼ Various measurement case videos are also available at the URL below, so please take a look.*

  • Other analytical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Imada Horizontal Electric Measurement Stand MH-1000N [Load Measurement]

Imada Horizontal Electric Measurement Stand MH-1000N [Load Measurement]

A horizontal electric stand that is easy to set up for samples and supports measurements for both tension and compression. Ideal for measuring the coefficient of friction.

The MH-1000N is a horizontal electric measurement stand that covers a range from low loads up to 1000N. (Features) ● Being horizontal makes it easy to handle samples. ● Electric measurement allows for consistent speed conditions. ● A cover that prevents sample fragments from easily entering the main body. ● The screw feed mechanism enables fine movement and provides stable thrust. ● It is optimally designed for various models of Imada force gauges. ● It can be connected to a force gauge for overload stop and load control. ● An optional speed/length meter can measure displacement and speed.

  • Other analytical equipment
  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wire Harness Dedicated Measurement Stand 'LH-500N'

Wire Harness Dedicated Measurement Stand 'LH-500N'

For those who want to measure the crimping strength of wire and electrical wire terminals. Comes with a fixture that allows you to easily set up samples with one touch【Wire Tensile Testing Machine】.

The LH-500N is a lever-type horizontal manual stand for tensile strength testing of crimp terminals. It can measure the crimp strength of terminals such as those used in wire harnesses. It comes with a fixture that allows for easy one-touch sample setup. When used in conjunction with a force gauge, it enables simple tensile strength testing as a dedicated testing machine. *Note: The force gauge is sold separately. 【Features】 - Crimp terminal strength measurement can be easily performed by simply pulling the lever. - The wire clamp section employs a wedge mechanism, allowing for a secure clamp with one touch. - A wide terminal clamp (maximum opening width of 6mm) that accommodates large crimp terminals.

  • Other analytical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Compact and Lightweight | Portable Manual Load Measurement Stand 'MS Series'

Compact and Lightweight | Portable Manual Load Measurement Stand 'MS Series'

A compact measuring stand weighing approximately 1.2 kg. It can be easily carried, allowing for load measurements in various locations.

The MS series is a compact and lightweight measurement stand designed to be used in combination with Imada's force gauge (load measuring device). It is the smallest and lightest among Imada's measurement stands, making it ideal for portability and integration into equipment. 【Features of the MS Series】 - It allows for fine movement through a screw feed mechanism, providing stable thrust. - Weighing approximately 1.2 kg, it is easy to carry and does not require a specific workspace. - The MSL-50N comes with a displacement gauge, allowing simultaneous measurement of load values and displacement. ■ For Imada's force gauges, please refer to the related products at the bottom of the page. ■ We also offer software that is convenient for graph creation and data analysis. For more details, please visit our website. *Various load measurement videos using Imada products are available on our website. ▼ You can also find various measurement case videos at the URL below, so please take a look.

  • Other analytical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Standard Type] Vertical Electric Measurement Stand 'MX2 Series'

[Standard Type] Vertical Electric Measurement Stand 'MX2 Series'

Tensile/Compression Test Stand! This vertical electric stand comes with various standard features and is suitable for durability testing.

The MX2 series is a measurement stand that can be used as a simple tensile/compression testing machine by combining force gauges and fixtures. It provides more reproducible results than measuring with a force gauge alone. At Imada, we offer over 50 types of compatible force gauges and more than 100 types of fixtures, allowing us to propose measurement methods suitable for our customers. 【Features】 ■ Uniform testing speed and direction for highly reproducible measurements - Digital setting and display of testing speed - Straight application of load → Reduces variability caused by the tester ■ Diverse measurements including durability and repetitive testing - Equipped with timer and counter functions for easy durability and repetitive testing - When connecting the ZTS/ZTA force gauge to the MX2 with the dedicated cable CB-518, the following functions are also available: - Overload prevention - Control of measurement actions based on load values - Automatic start and recording of graph plotting ■ Easy operation - Setting testing speed and number of tests is simple with just one dial while looking at the monitor ■ Peel testing / friction coefficient measurement - In addition to tensile and compression tests, it can also accommodate peel testing and friction coefficient measurement.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Standard Type Electric Torque Stand "MTS Series"

Standard Type Electric Torque Stand "MTS Series"

By using it in conjunction with the Screw Cap Tester (Torque Meter) DTXS series/DTXA series, torque measurement at a constant speed becomes possible.

The "MTS Series" is an electric torque stand that allows for constant rotation speed and more precise torque measurement. It achieves high reproducibility in measuring various twisting forces, such as the opening torque of PET bottle beverages and pharmaceutical bottles, the operating force of rotary switches, and the torsional strength of sheet materials. 【Features】 ■ Enables more precise torque measurement by maintaining a constant rotation speed ■ Supports a variety of measurements, including operation control based on set values and detection of opening torque ■ Capable of measuring various samples with a rich lineup of clamp fixtures *For more details, please refer to the PDF materials or feel free to contact us.

  • Other analytical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simple Lever Measurement Stand 'FCA-50N'

Simple Lever Measurement Stand 'FCA-50N'

This is a testing machine that allows for easy measurement of hardness through lever operation. It measures the force required to "crush, push, cut, and break" the sample.

The "FCA-50N" is a measurement stand that measures the force of "crushing, pressing, cutting, and breaking" of samples, achieving high reproducibility. It is a measurement stand that allows for compression tests with a constant pressing force, easily operated with a lever. It is suitable for measuring the pressing force of springs, cushioning materials, plastic parts, and food, as well as cutting force. 【Features】 - Easily measure crushing force with a constant pressing amount - Pressing amount can be set with a knob - Easy operation with a lever type, achieving high reproducibility - Made of stainless steel for easy maintenance 【Imada provides optimal load measurement solutions with 70 years of know-how】 Imada is a pioneering manufacturer that produced Japan's first force gauge in 1947. We offer a wide range of solutions, including tensile tests, compression tests, peel tests, friction tests, pressure tests, and puncture tests. Trust us for load/torque measurement needs. Utilizing our expertise as a specialized manufacturer, we propose solutions tailored to customer needs. Custom manufacturing is also available. *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Horizontal Type Manual Measurement Stand 'SH Series'

Horizontal Type Manual Measurement Stand 'SH Series'

Stable thrust with a handle-type stand! A measuring stand that makes it easy to set up samples in a horizontal position.

The "SH Series" is a manual measurement stand that allows for fine movement through a screw feed mechanism, providing stable thrust. Being horizontal, it makes handling samples easy. We offer models such as the "SH-1000," which features a cover that prevents sample fragments from entering the main body, and the "SH-3000," suitable for various material strength tests up to 3000N. 【Features】 ■ Hand-operated stand ■ Horizontal design for easy sample handling ■ Fine movement capability through a screw feed mechanism, providing stable thrust ■ Designed to be compatible with various Imada force gauge models *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • Other analytical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to stand

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.