rivet×ベルホフ - メーカー・企業と製品の一覧

rivetの製品一覧

1～12 件を表示 ／ 全 12 件

表示件数
Aluminum die casting and high-tensile joint - dissimilar material joint self-piercing rivet.

Aluminum die casting and high-tensile joint - dissimilar material joint self-piercing rivet.

Very high fastening strength in one step! It is possible to fasten dissimilar metals and materials with different strengths!

"RIVSET" is a high-strength and highly reliable self-piercing rivet. It easily mechanically joins different types of materials without the need for a pilot hole. It is also possible to fasten three or more materials. This product penetrates the upper base material and expands at the tip due to the shape of the die within the lower base material. 【Features】 ■ Joining of dissimilar metals ■ No need for pilot hole processing ■ Environmentally friendly method ■ Cost reduction ■ High static and dynamic strength ■ Ideal for combinations of various materials, including high-tensile steel sheets

  • Steel Door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Blind rivet "RIVQUICK"

Blind rivet "RIVQUICK"

Compatible with a wide range of materials! Flexible and economical blind rivets for thin sheet joining.

"RIVQUICK" is a blind rivet that can join parts with accessibility from only one side. It creates a permanent joint and can be used with various head shapes and material combinations. It is used for permanently joining thin sheet materials such as sheet metal and various material profiles. 【Features】 ■ Proven joining system ■ No distortion due to heat generation ■ Adaptable to coated parts ■ Compatible with a wide range of materials (aluminum, steel, stainless steel, etc.) *You can download the catalog. For more details, please feel free to contact us.

  • Steel sash

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Utilization of resistance welding machine for dissimilar material joining rivets WELTAC

Utilization of resistance welding machine for dissimilar material joining rivets WELTAC

It is a joining technology that can achieve weight reduction through the use of dissimilar materials while making use of existing welding lines.

Conventional joining technologies, such as resistance spot welding, cannot be used for modern multi-material vehicle bodies because the materials are either thermally incompatible or restricted. To meet these requirements, Berhof developed the WELTAC technology. This technology enables multi-material joining on existing welding lines, expanding design and engineering freedom. Additionally, in automation systems, it is developed based on our already established SPR (Rivset) technology, so you can use it with confidence. [Features] - Enables spot welding of dissimilar materials. - Usable for aluminum and cast materials ranging from 0.8 to 3.2 mm. - Capable of joining 2 to 4 sheets. - Adhesive can be used in conjunction.

  • Special Construction Method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Load-setting type blind rivets & studs "Easy assembly"

Load-setting type blind rivets & studs "Easy assembly"

Since the load value is set for assembly, anyone can easily assemble blind rivets without any assembly failures.

Since it is a load setting, once the optimal part number is selected, assembly is easy. Unlike stroke setting tools, there are no failures even with a double pull. As long as the trigger is pulled continuously until the crimping is complete, the crimping quality remains consistent regardless of who assembles it. <Features> Compatible with various types of tips for M3 to M10 using a single tool. Also compatible with stud types. No thermal stress. Unlike welded studs, it does not generate heat during assembly. Variations for various materials are available. Suitable for iron, stainless steel, and resin, SFC is effective for preventing cracking in PP products. Many part numbers. Over 3,000 types for nut types. More than 170 types for stud types, including catalog items. <Basic Information> 1. Easy assembly 2. No thermal stress during assembly 3. Compatible with various base materials (iron, aluminum, CFRP, PP, magnesium) 4. Various materials available (iron, aluminum, stainless steel) 5. Some with sealing function 6. Compatible even with soft plates 7. High-strength screw threads available 8. Many adoption records globally 9. Battery tools are ideal for work in areas without air supply.

  • Duct related equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
CFRP + Steel Dissimilar Material Fastening Self-Piercing Rivet

CFRP + Steel Dissimilar Material Fastening Self-Piercing Rivet

Very high fastening strength in one step! It is possible to fasten dissimilar metals and materials with different strengths!

"RIVSET" is a high-strength, reliable self-piercing rivet. It easily mechanically joins different types of materials without the need for a pilot hole. It can also fasten three or more materials. This product penetrates the upper base material and expands at the tip within the lower base material due to the shape of the die. 【Features】 ■ Joining dissimilar metals ■ No pilot hole processing required ■ Environmentally friendly method ■ Cost reduction ■ High static and dynamic strength ■ Ideal for combinations of various materials, including high-tensile steel sheets.

  • Steel Door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
One-sided access stack fastening, square pipe + sheet material, no hole processing required.

One-sided access stack fastening, square pipe + sheet material, no hole processing required.

It can be fastened from one side without a bottom hole, making it suitable for profile structures such as pipes. The driving time is achieved in less than one second.

"RIVTAC" allows for high-speed fastening of high-strength materials without pre-drilling. It can be used for fastening in profile structures through access from one side. Additionally, it enables fastening of dissimilar materials and the use of adhesives, making it suitable for fully automated lines with robots. At Daimler, it is referred to as ImpAcT and is used for joining aluminum alloys and steel in white body construction. 【Features】 - Fastening possible from one side - Fastening of composite materials and multi-layer structures - Fastening to high-strength materials - Fastening to profile structures (pipes) - One-process method - High-speed fastening - Use of adhesives in combination

  • Solar power generation equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
One-sided access stack fastening, compatible with 1000 MPa, no hole processing required.

One-sided access stack fastening, compatible with 1000 MPa, no hole processing required.

It can be fastened from one side without a bottom hole, making it suitable for profile structures such as pipes. The driving time is achieved in less than one second.

"RIVTAC" allows for high-speed fastening of high-strength materials without pre-drilling. It can be used for fastening in profile structures with access from one side. Additionally, it enables the fastening of dissimilar materials and the use of adhesives, making it suitable for fully automated lines operated by robots. At Daimler, it is referred to as ImpAcT and is used for joining aluminum alloys and steel in white body construction. 【Features】 - Fastening possible from one side - Fastening of composite materials and multi-layer structures - Fastening to high-strength materials - Fastening to profile structures (pipes) - One-process method - High-speed fastening - Use of adhesives in combination

  • Solar power generation equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fastening of aluminum series 5000 and 6000.

Fastening of aluminum series 5000 and 6000.

Very high fastening strength with a single step! Fastening different aluminum materials that are difficult to weld without pre-drilling. No heat is generated, making it easy for anyone to use.

Generally, it is said that welding aluminum plates of different types is difficult. Due to the differing properties of the 5000 series and 6000 series aluminum, welding is not easy. We will introduce a method that allows for easy fastening even under such conditions. 1. "RIVSET" is a high-strength, highly reliable self-piercing rivet. It mechanically joins different types of materials easily without the need for a pilot hole. It is also possible to fasten three or more materials. This product penetrates the upper base material and expands at the tip due to the shape of the die within the lower base material. 2. In the context of the need for CO2 reduction, the fastening method called RIVCLINCH, which uses only air as a power source, does not generate heat and does not use auxiliary materials like rivets. By applying multiple points, it can achieve comparable shear strength to spot welding or SPR. 3. "RIVTAC" allows for high-speed fastening of high-strength materials without the need for a pilot hole. It can be used for profile structures with access from one side, and it is also possible to fasten dissimilar materials or use adhesives in conjunction.

  • Steel Door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Steel joining method for thick and thin plates (e.g., 3mm + 1mm).

Steel joining method for thick and thin plates (e.g., 3mm + 1mm).

Very high fastening strength with 1-step! Fastening of different thicknesses of iron that are difficult to weld, without pre-drilling. No heat is generated, and it can be easily used by anyone.

Generally, it is said that thick plates and thin plates with a large thickness-to-width ratio are difficult to weld. When the ratio of thin plates to the total thickness is high, the difficulty of welding increases. We will introduce a method that allows for easy fastening even under such conditions. 1. 'RIVSET' is a high-strength, highly reliable self-piercing rivet. It mechanically joins different types of materials easily without the need for a pre-drilled hole. It is also possible to fasten more than three materials. This product penetrates the upper base material and expands at the tip due to the shape of the die within the lower base material. 2. In the context of the need for CO2 reduction, the fastening method RIVCLINCH, which uses only air as a power source, generates no heat and does not use auxiliary materials such as rivets, relies on plastic deformation. By applying multiple points, it can achieve equivalent strength compared to spot welding or SPR in shear strength comparisons. 3. 'RIVTAC' allows for high-speed fastening of high-strength materials without the need for a pre-drilled hole. It can be used for profile structures with access from one side, and it is also possible to fasten dissimilar materials or use adhesives in conjunction.

  • Steel Door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
1600MPa Jointable SPR 'RIVSET'

1600MPa Jointable SPR 'RIVSET'

Very high fastening strength in one step! It is possible to fasten dissimilar metals and materials with different strengths!

"RIVSET" is a high-strength, reliable self-piercing rivet. It easily mechanically joins different types of materials without the need for a pilot hole. It is also possible to fasten three or more materials. This product penetrates the upper base material, and the tip expands within the lower base material due to the shape of the die. 【Features】 ■ Joining of dissimilar metals ■ No pilot hole processing required ■ Environmentally friendly method ■ Cost reduction ■ High static and dynamic strength ■ Ideal for combinations of various materials, including high-tensile steel sheets

  • Steel Door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Eco-friendly clinch fastening, no rivets needed, only air used, CO2 reduction.

Eco-friendly clinch fastening, no rivets needed, only air used, CO2 reduction.

No rivets needed, power source is only air, no heat generated, excellent energy consumption reduction effect, low running cost clinching RIVCLINCH.

In the context of the demand for CO2 reduction, we propose a new mechanical fastening method called RIVCLINCH, which uses only air as a power source, generates no heat, and does not use rivets. By applying multiple points, it achieves comparable shear strength to spot welding and SPR. The only consumables are the die and punch at the tool tip. In Europe, it is commonly used for box-type fastenings in vending machines, control panels, ventilation systems, and more. It can be easily assembled by anyone, requiring no specialized skills. The tool also requires no complicated setup; you simply pull the trigger. Please give it a try.

  • Gates, walls and fences

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Clinch fastening through plastic deformation without auxiliary materials.

Clinch fastening through plastic deformation without auxiliary materials.

No auxiliary materials such as rivets are needed, the power source is only air, no heat is generated, and bonding can be done instantly. Low-cost, high-performance fastening.

In the context of the demand for CO2 reduction, RIVCLINCH is a fastening method that uses only air as the power source, generates no heat, and does not use auxiliary materials such as rivets, relying instead on plastic deformation. By applying multiple points, it is possible to achieve equivalent strength when compared to spot welding and shear strength with SPR. Additionally, it can fasten thin plates, which are said to be difficult to weld, as well as combinations of materials with different properties and dissimilar materials. Examples include: - Combinations with a high ratio of total plate thickness to the thinnest plate thickness - Aluminum 5000 x Aluminum 6000 - Plate assemblies that require multiple welds at spots, etc. The only auxiliary materials needed are the die and punch at the tool tip. The tools can be hand tools, stationary tools, or automation for robots. We will propose the most suitable option based on the production scale.

  • Gates, walls and fences

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

rivetに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.