resin(0.2) - メーカー・企業と製品の一覧

更新日： 集計期間:Aug 06, 2025～Sep 02, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

resinの製品一覧

16～26 件を表示 ／ 全 26 件

表示件数
Thin fluoropolymer (PTFE) adhesive tape "No.903UT"

Thin fluoropolymer (PTFE) adhesive tape "No.903UT"

Contributing to CO2 reduction with thin-layer and lightweight design! Achieving approximately 23% weight reduction compared to conventional products.

The "No.903UT" is a thin type adhesive tape with a total thickness of 0.06mm, featuring excellent properties such as heat resistance, slip resistance, and water repellency. It has obtained Flame Retardant certification against the UL510 flammability standards (Registration Number E34833). It can be continuously used over a wide temperature range of -60℃ to 200℃ (recommended value). Additionally, it can be used at even higher temperatures for short periods. 【Features】 ■ Thin type with a total thickness of 0.06mm ■ Achieves approximately 23% weight reduction compared to conventional products ■ Excellent heat resistance, slip resistance, and water repellency ■ Can be continuously used over a wide temperature range of -60℃ to 200℃ *For more details, please refer to the PDF document or feel free to contact us.

  • Subsidiary materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Rapid realization of product development through material selection and engineering.

Rapid realization of product development through material selection and engineering.

Support from medical materials and design to prototype verification and mass production, all in one.

Our company is engaged in the manufacturing of medical devices and also handles medical materials primarily made from resin. We offer a wide range of biocompatible resins, including implant-grade, short-term contact grade, and other materials suitable for sterilization. As various conditions such as the class of medical devices, usage environment, and sterilization requirements overlap, the hurdles for obtaining materials increase. Consequently, we have seen a growing number of inquiries starting from material selection, and we can propose materials tailored to specific applications. Additionally, by being involved from the design and development stage, we support manufacturing that considers the production methods and costs of the final product. We utilize the latest technologies such as 3D printers and 3D/CT scanning for design, prototyping, and verification, providing services to realize product commercialization more quickly and reliably.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Book] Formulation Design and High Functionality of Epoxy Resins (No. 2222)

[Book] Formulation Design and High Functionality of Epoxy Resins (No. 2222)

Available for preview - High heat resistance, high thermal conductivity and insulation, low dielectric constant, reinforcement.

★ Specific measures that respond to the latest electronics packaging materials such as high-frequency substrates and semiconductor encapsulation can be understood from the examples of advanced companies! ★ Optimization of the selection, usage amount, and curing process conditions of the most suitable curing agents! Reduction of environmental impact through the realization of low-temperature rapid curing! －－－－－－－－－－－－－－－－－－－－－ ■ Key Points of This Book 1 ● High heat resistance and high thermal conductivity - Long-term heat resistance for 5G/6G compatible power modules - Increased heat resistance through benzoxazine and bismaleimide modification - High filling of fillers with high thermal conductivity - Low dielectric constant that trades off with heat resistance ● Toughening and high strength - Compatibility with processability as CFRP matrix resin - Coatings with excellent self-healing and corrosion resistance ● High adhesion - Multi-material compatibility - Functions with excellent workability such as high viscosity and high room temperature stability ● Environmental considerations - Development of plant oil-derived resins - Recycling technology for epoxy resins and CFRP - Development of curing processes with low CO2 emissions ● Latest technologies and troubleshooting measures - Low-temperature rapid curing technology for epoxy resins - Measures against mixing unevenness and troubles with curing agents - Data-driven approaches using MI - Evaluation of cured products containing many auxiliary materials

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FluoroClear Pleats All Fluoropolymer GFL Series

FluoroClear Pleats All Fluoropolymer GFL Series

Provides broad chemical compatibility and heat resistance! Can be disinfected using compatible chemical agents!

The "GFL Series" is a high-purity FluoroClear filter cartridge designed for the highly corrosive wet etching and cleaning applications in the microelectronics industry. The ECTFE hardware and support layer, composed of 100% fluoropolymer materials, provide a wide range of chemical compatibility and thermal resistance. The PTFE membrane delivers high flow rates and high-purity effluent with low pressure loss. The cartridge can be provided in a wet pack with hydrogen peroxide preservative in cleaned and dried products or high-purity deionized water. 【Features】 ■ Manufactured in a cleanroom environment to ensure product cleanliness ■ Can be disinfected using compatible chemicals ■ All components meet the biological safety specifications of plastic USP Class VI -121°C ■ Compliant with FDA regulations for food and beverage contact use *For more details, please refer to the PDF materials or feel free to contact us.

  • Water Treatment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
1-component room temperature curing flexible epoxy resin "Bond U-Cut ONE"

1-component room temperature curing flexible epoxy resin "Bond U-Cut ONE"

For filling various joints in civil engineering structures! A flexible epoxy resin-based filler that cures at room temperature with a single component, no mixing required.

"Bond U-Cut ONE" is a paste-like single-component flexible epoxy resin suitable for filling and repairing cracks in concrete and mortar, as well as for filling various joints in civil engineering structures. It is easy to handle as it does not require the hassle of "measuring" or "mixing," and it is not subject to "usable time" constraints. Additionally, it has excellent elasticity, follows the behavior of cracks, and causes minimal contamination with various coatings. 【Features】 ■ Obtained JIS A 6024 (Epoxy resin for building repair and reinforcement) certification ■ Excellent elasticity, follows the behavior of cracks ■ Superior adhesion to concrete and various building materials ■ Cures at room temperature without mixing ■ Causes minimal contamination with various coatings *For more details, please refer to the PDF document or feel free to contact us.

  • Reinforcement and repair materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Epoxy resin for underwater and wet surfaces "Alpron W Series"

Epoxy resin for underwater and wet surfaces "Alpron W Series"

A wide variety of epoxy resins for underwater bonding, lining, and injection are available!

We handle the underwater and wet surface epoxy resin "Alpron W Series." "W-103E/107/107L" is a high-performance epoxy resin-based adhesive in putty form, suitable for bonding and sealing concrete structures in water, making it ideal for construction in areas where water is present. In addition, we offer "W-201/221/236" for underwater injection and primers for wet surfaces such as "W-301/302/305." 【Features】 <For underwater bonding and lining> ■ Completely adheres to the substrate even in the presence of moisture ■ Can be applied underwater without being washed away ■ Compressive strength and flexural strength are 2 to 3 times that of concrete ■ Excellent waterproofing ■ Superior resistance to water, oil, and chemicals *For more details, please refer to the PDF document or feel free to contact us.

  • Interior coating materials
  • paint

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Flame-resistant fluoropolymer (PTFE) adhesive tape "No. 923UL"

Flame-resistant fluoropolymer (PTFE) adhesive tape "No. 923UL"

For general sliding applications, it can be used by adhering to materials such as metal, plastic, and ceramics!

"No.923UL" is a tape made from NITOFLON No.920UL (high-strength film of polytetrafluoroethylene resin) as the base material, with surface treatment applied to one side and a heat-resistant silicone adhesive coated on the treated surface. It is suitable for applications such as roll wrapping with polyethylene laminators. It possesses excellent characteristics, including electrical properties, heat resistance, chemical resistance, and non-stick properties. 【Features】 - The non-stick surface has excellent properties such as electrical characteristics, heat resistance, weather resistance, chemical resistance, water resistance (water repellency), and non-stick properties inherent to polytetrafluoroethylene resin. - Excellent tensile strength. - Excellent flame resistance. *For more details, please refer to the PDF document or feel free to contact us.

  • Subsidiary materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Colored fluoropolymer (PTFE) adhesive tape "No.923S"

Colored fluoropolymer (PTFE) adhesive tape "No.923S"

As an H-type insulating material, it is also suitable for coil insulation! Excellent heat resistance, chemical resistance, and non-stick properties.

"No.923S" is a tape made from a high-strength film of orange-colored polytetrafluoroethylene (PTFE) resin, with surface treatment applied to one side and a heat-resistant silicone adhesive coated on the treated surface. It can be used for general sliding applications by adhering it to metals, plastics, ceramics, and more. It possesses excellent characteristics, including electrical properties, heat resistance, chemical resistance, and non-stick properties. 【Features】 - The non-stick surface has excellent properties such as electrical characteristics, heat resistance, weather resistance, chemical resistance, water resistance (water repellency), and non-stick properties inherent to polytetrafluoroethylene resin. - Excellent tensile strength. - Excellent flame resistance. *For more details, please refer to the PDF document or feel free to contact us.

  • Subsidiary materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Epoxy resin "BO Medicon #309"

Epoxy resin "BO Medicon #309"

Almost no shrinkage after hardening! High viscosity injection epoxy resin for building repair conforms to JIS A 6024.

We would like to introduce our epoxy resin 'BO Mejicon #309'. It has a grease-like consistency, ensuring no dripping on vertical surfaces and excellent workability. It exhibits superior adhesion to concrete, steel, and rigid PVC. Additionally, when applied with a gun, it allows for gap injection and filling even in underwater construction, preventing cracks and lifting. 【Features】 ■ Complies with the high viscosity requirements of JIS A 6024 for construction repair injection epoxy resin ■ Grease-like consistency with no dripping on vertical surfaces and excellent workability ■ Superior adhesion to concrete, steel, and rigid PVC ■ Contains no volatile solvents, resulting in minimal shrinkage after curing ■ Allows for gap injection and filling in underwater construction, preventing cracks and lifting when applied with a gun *For more details, please download the PDF or feel free to contact us.

  • paint

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Laminating a PTFE sheet onto one side of glass fiber composite material.

Laminating a PTFE sheet onto one side of glass fiber composite material.

Introducing Japan Polymer's products for use in piping fittings for power plants and waste treatment facilities!

We would like to introduce our "Fluororesin/Laminate" products. This product is a laminate of PTFE sheet on one side of a glass cloth composite material. It is pinhole-free and can be used in a range from -100 to +260 degrees Celsius. Please feel free to contact us if you have any inquiries. 【Features】 ■ Pinhole-free *For more details, please refer to the PDF document or feel free to contact us.

  • Subsidiary materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
無溶剤透明吹き付け防滑樹脂『ESGスプレー』

無溶剤透明吹き付け防滑樹脂『ESGスプレー』

吹き付け工法による独自技術！点接着、半艶仕上げで施工後も目立たず自然な仕上り

『ESGスプレー』は、素早く広範囲を防滑にできる吹き付け工法による 透明防滑樹脂です。 硬化も早く施工後30分程度で歩行可能となります。 施工表面は点接着となり、下地の通気性はそのまま維持。 水の影響を受けやすい場所でも効率的に施工ができるようになりました。 【特長】 ■ローラー塗りと比べ施工範囲は5～10倍 ■半艶で既存下地の状態に近い自然な仕上りを実現 ■そのまま重ね塗りが可能 ■有害物質を含まない環境材料 ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。

  • Paving of sidewalks, roads, parking lots and stadiums
  • Subsidiary materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

resinに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.