Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
1396～1410 item / All 1847 items
Ideal liquid-sealed vacuum pump for various types of priming and other vacuum sources.
The "ELM type (liquid-sealed vacuum pump)" is an ideal land pump for dehydration, drying, distillation, concentration, and cooling under vacuum. It can also be used for priming various pumps and as another vacuum source. For more details, please refer to the catalog or feel free to contact us.
Ideal for transporting sewage and solids from factories and public facilities! Submersible pump for civil engineering construction.
The underwater sand pump "NSK type" is a long-selling standard product suitable for the transportation of excavated soil and mud in civil engineering construction, foundation work, and boring foundation work, as well as the transportation of bentonite, sewage and solids from factories and public facilities, and the suction and discharge of muddy sand. For more details, please refer to the catalog or feel free to contact us.
Compact and lightweight! The piping remains as is, allowing for disassembly and inspection of the pump.
The "UFP-40" is a device installed in the middle of the supply water piping to ensure sufficient water volume and pressure for the "UFD-80s" or "UF-120s," compensating for any lack of water pressure and securing the production volume of sterilizing water. It can maintain a pressure of 0.33 MPa when supplying 120 liters per minute. Additionally, it is compact, lightweight, and in-line, allowing for installation in the middle of the piping without taking up installation space. 【Features】 ■ The liquid contact parts are made of stainless steel, making it resistant to red water issues. ■ It uses a low-noise, totally enclosed outdoor motor, suitable for both indoor and outdoor installation locations. ■ It can be installed in the middle of the piping without taking up installation space. ■ The piping remains intact, allowing for disassembly and inspection of the pump. ■ It starts based on the activation signal from the pH hypochlorous water supply device and performs inverter control. *For more details, please refer to the catalog or feel free to contact us.
Leave it to us for all kinds of pumps, blowers, OA equipment, and network-related devices!
Okayama Electric Industry Co., Ltd. is a company primarily engaged in the sales and installation of various pumps and blowers. The business is centered around two departments: the Environmental Systems Department and the Information Systems Department. The Environmental Systems Department handles the contracting and construction of water treatment facilities and environmental equipment, maintenance management, and the sale of related equipment. The Information Systems Department focuses on selling information-related equipment and building networks for local governments, schools, and businesses. For any inquiries related to various pumps, blowers, environmental improvement devices, office automation equipment, and network-related equipment, please feel free to contact us. 【Main Sales Items and Contracted Works】 ■ Sales and installation of various pumps and blowers ■ Sales of various office automation equipment ■ Contracting business (electrical work, plumbing work, machinery installation) *For more details, please refer to our catalog or feel free to contact us.
![[Case of Machinery Equipment Repair] Pump Replacement Work](https://image.www.ipros.com/public/product/image/e8c/2001112535/IPROS03720824210134897695.png?w=280&h=280)
Comprehensive support from equipment selection to complete construction! Introducing case studies of mechanical equipment repairs for pump replacement projects.
"We are currently using pumps from Kamino Manufacturing, and we are considering an update. However, the existing pumps are old, and there are no specifications or documentation left, and the manufacturer has gone out of business, so we are in trouble due to the lack of information," was the request we received. Based on comparative materials, we held discussions with pump replacement contractors, piping construction contractors, and insulation construction contractors to confirm the scope of work. We calculated the costs for each construction task and the total project and submitted the estimate to the customer. We were able to receive the order as our ability to handle everything from equipment selection to the entire construction (pump replacement, piping, insulation) was appreciated. [Case Overview] ■ Industry: Manufacturing ■ Subject: Pump Maintenance ■ Request: Pump Replacement Work ■ Construction Deadline: 1 Day ■ Key Service Areas: Mie Prefecture, Hokusei District, Chusei District ■ *For more details, please refer to the related links or feel free to contact us.*
Handle fragile and delicate objects safely, reducing waste with higher quality production!
We would like to introduce our "Food-Grade Soft Gripper." This flexible silicone molded gripper can easily handle a wide range of irregular shapes and delicate objects. Additionally, since there is no external air supply, there is no dust, noise, complexity, or additional costs. Explore new possibilities in food and beverage automation with our certified product. 【Materials that can be used】 ■ Organic materials ■ Plastic ■ Metal ■ Wood ■ Glass *For more details, please refer to the PDF document or feel free to contact us.
A wide range of on-site supplies, including "pumps" that can be selected according to their intended use, are featured!
This catalog introduces the products handled by Kenzo Trading Co., Ltd., which sells construction machinery components and building materials. It features items suitable for drainage in general civil engineering and construction, such as the "Tsurumi Pump" from Tsurumi Manufacturing, and "Steel Pipe Piles (Round Piles)" from Kimioka Iron Works. [Contents (excerpt)] ■ Tsurumi Pump ■ Compilers ■ Steel Pipe Piles (Round Piles) ■ Reinforcement Bars for Penetration Holes ■ Hole Forming Materials ■ Safety Steel Plates ■ Pipe Ladders *For more details, please refer to the PDF document or feel free to contact us.
Semi-automating the hand-tightened clamp for NC processing to improve production efficiency! High durability with a simple structure. Supports high pressure up to 35MPa.
The VEKTEK manufactured "Compact Hydraulic Screw Pump" is a power source suitable for integration into workpiece hand-tightening clamp units (jigs). It can be introduced at a low cost while also offering high durability that can withstand pressures up to 35 MPa. It operates precisely at speeds of up to 500 rpm, contributing to increased efficiency in on-site work. We offer two types: the "block type" with bolt fixation and the "cylindrical type," which pursues space-saving design. 【Features】 ■ Power source for hand-tightening clamps ■ Minimum operating pressure = 35 MPa, maximum oil discharge volume = 26 cm³ ■ Can manage output pressure in conjunction with a torque wrench ■ Simple structure with high durability and reliability ★ We are currently offering a free "Comprehensive Catalog of Hydraulic Clamping Equipment"! You can view it via PDF download. This product is featured on page 115.
Control to reduce transport volume and decrease power consumption! Improved comfort through system implementation.
The "Clean Hit Inverter" has numerous achievements in hotels and other facilities within Huis Ten Bosch. Central air conditioning requires the transportation of chilled and hot water for indoor air conditioning, regardless of the occupancy rate of guest rooms and banquet halls, which means that related pumps and supply/exhaust fans are always in operation. There was a challenge to reduce this electricity consumption, leading to the introduction of our system. The key points are the significant reduction rate and the feature that allows the energy consumption during operation after equipment installation to be stored and displayed on the equipment, making the effects of the introduction visible. Previously, there were issues with the indoor environment being too cold or too hot, but by optimizing the chilled and hot water temperatures with temperature sensors, these issues have been eliminated, resulting in improved comfort. [Challenge] ■ Is it possible to reduce the electricity consumption of pumps and supply/exhaust fans related to the transportation of chilled and hot water? *For more details, please refer to the PDF materials or feel free to contact us.
Handles various pressures! No seal maintenance required, low cost, compatible with low to high viscosity liquids!
The seal-less gear pump from Daito Industrial is an environmentally friendly gear pump that prioritizes safety with its seal-less design. The shaft seal is of the magnetic type, ensuring complete sealing with no liquid leakage. It can deliver flow rates from 0.1 L/min to 600 L/min. It requires no seal maintenance, making it low-cost and capable of handling liquids from low to high viscosity. **Features** - Compatible with a variety of pressures: - The pump suction side can handle from -9.5 m to 4 MPa. - The pump discharge side can handle up to 4 MPa. - It has a constant flow rate, allowing for flow control through rotational control. - Capable of transferring liquids from low to high viscosity (0.3 to 100,000 mPa·s). - Can transfer high-temperature fluids up to 350°C. - Supports a wide range of working flow rates (0.1 to 550 L/min). - Made from a variety of metal materials. *Typical materials include: FC250, FCD450, SCS13A, SCS14A/S45C, SUS304, SUS630, SUS316. - Drive methods are negotiable (V-belt drive is also possible). For more details, please download the PDF or contact us.
High durability! For equipment lubrication, as well as oil circulation, transfer, and burner injection, etc.
The "KR type" is a pump suitable for the transfer of lubricating oil, featuring a gland packing type shaft seal. It has a simple and spacious design with high durability. It is equipped with a built-in safety valve and is used for lubricating various equipment, circulating cutting oil, transferring fuel oil, injecting low-pressure oil burners, pre-pressurization, and transporting various other liquids, driven by a V-belt. 【Features】 ■ Gland packing type shaft seal ■ Simple and spacious design ■ High durability ■ Built-in safety valve ■ V-belt drive *For more details, please refer to the PDF materials or feel free to contact us.
Continuous operation possible! A versatile gear pump designed to withstand harsh operating conditions.
The "HSR type" is a high-performance general-purpose gear pump equipped with a safety valve, which can be used with either V-belt drive or direct coupling drive. This product is designed and manufactured to withstand particularly harsh operating conditions. It can operate continuously and is suitable for forced lubrication of various equipment, hydraulic applications, and heavy oil spraying. Additionally, in low-pressure situations, it is also suitable for the circulation transport of various paints without lubrication, water-soluble cutting oils, lacquers, and more. 【Features】 ■ General-purpose gear pump with built-in safety valve ■ Shaft seal of the gland packing type ■ Usable with either V-belt drive or direct coupling drive ■ Capable of continuous operation *For more details, please refer to the PDF materials or feel free to contact us.
Usable up to a lift height of 60m! Improved the "HSR type" shaft seal to a double oil seal type!
The "HSR-S type" is a specialized pump for kerosene and A heavy oil, which has improved the shaft seal of the "HSR type." It can be used for a lift height of up to 60m, making it ideal for transferring fuel for central heating and for low-pressure oil burner combustion. It is possible to use O-rings and oil seals made of Viton, and it can operate with either V-belt drive or direct coupling. 【Features】 ■ Improved the shaft seal of the "HSR type" gear pump to a two-stage oil seal type ■ Usable for lift heights of up to 60m ■ O-rings and oil seals can be made of Viton ■ Operable with either V-belt drive or direct coupling *For more details, please refer to the PDF document or feel free to contact us.
Handles harsh conditions! High-pressure transport and adhesive pumps using self-lubricating plain metal.
The "HP type and KH type" are pumps that form the basis of a general-purpose gear pump, utilizing self-lubricating plain metal. They can be driven either directly by a motor or via a V-belt, and have a very wide range of applications as transport pumps, capable of high-pressure transport of lubricating oils, greases, and other substances, as well as heavy oils, kerosene, and viscous liquids under poor lubrication conditions, even in harsh operating conditions. Additionally, for liquids where the transportation and sealing of crude oil and kerosene are important, we offer the "M type" with a mechanical seal in our lineup. 【Features】 ■ Utilizes self-lubricating plain metal ■ Structural and material combinations are possible to withstand various operating conditions ■ Can be driven either directly by a motor or via a V-belt ■ Usable even under harsh operating conditions *For more details, please refer to the PDF materials or feel free to contact us.
