probe×ウェーブクレスト - List of Manufacturers, Suppliers, Companies and Products

probe Product List

1～15 item / All 17 items

Displayed results
Wavecontrol Low Frequency Isotropic Electromagnetic Field Probe WP400

Wavecontrol Low Frequency Isotropic Electromagnetic Field Probe WP400

Wide frequency range 1Hz to 400KHz isotropic electric and magnetic field measurement probe. 2-in-1 probe WP400 capable of spectrum analysis.

This product has also been adopted at airports in Paris. 【Features】 - High-precision measurement of electric and magnetic fields - Wide frequency range and high dynamic range - Isotropic & true RMS measurement - Spectrum analysis - Selective and broadband measurements in all three axes through FFT processing - Compliant with international standards

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wavecontrol Inc. Isotropic Electric Field Probe WPF Series

Wavecontrol Inc. Isotropic Electric Field Probe WPF Series

High-performance isotropic electric field probe

**Features** - High sensitivity - Isotropic & RMS measurement - Excellent attenuation - Compliance with international standards **Frequency Range** - [WPF3] 100KHz - 3GHz - [WPF6] 100KHz - 6GHz - [WPF8] 100KHz - 8GHz - [WPF18] 300KHz - 18GHz - NEW!! [WPF40] 20MHz - 40GHz **Sensor Type** Isotropic, RMS **Frequency Response Type** Flat

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Near Field Probe ~40GHz HR-E 40-1

Near Field Probe ~40GHz HR-E 40-1

Near-field probe capable of measuring up to 40GHz.

The HR-E 40-1 electric field probe was developed for the analysis and measurement of high-frequency structures (such as 5G modules and microwave components). The HR-E 40-1 is a passive near-field probe designed to measure electric fields up to 40GHz. The probe's resolution is 0.2mm. For reproducible measurements of circuits and signal lines, it is recommended to use a test setup with the LangerIC scanner.

  • Other measuring instruments
  • Analysis and prediction system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF surface current monitoring probe 30kHz to 400MHz

RF surface current monitoring probe 30kHz to 400MHz

It shows a very flat response from 5MHz to 300MHz, covering a frequency range from 30kHz to 400MHz.

【Product Overview】 The TBSCP1-5M300 is an RF surface current monitoring probe that expands Tekbox's range of affordable EMC pre-compliance testing equipment. This probe exhibits a very flat response from 5 MHz to 300 MHz and is characterized over a frequency range of 30 kHz to 400 MHz. The TBSCP1-5M300 is designed for RF current monitoring applications that require measuring RF currents flowing on surfaces such as PCB ground planes or traces, metal planes, or wires. The footprint of the RF current monitoring probe is 40 mm x 15 mm. The transfer impedance is -7 dB ohms, with a typical 3 dB bandwidth from 5 MHz to 300 MHz.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF pulse current monitoring probe 1Hz to 200MHz

RF pulse current monitoring probe 1Hz to 200MHz

Characteristic frequency range: RF pulse current monitoring probe from 1Hz to 200MHz.

The probe shows a very flat response from 30Hz to 70MHz and is characterized by a frequency range from 1Hz to 200MHz. In contrast to the RF current monitoring probes designed for EMC applications typically used for measurements in the frequency domain, the TBPCP2-3070 is used for surge or RF pulse current monitoring applications in the time domain. The aperture of the RF current monitoring probe is 25 mm. The transfer impedance measured with a 50Ω + 50Ω loop test fixture is -26 dB Ohms with a 3dB bandwidth from 30Hz to 70MHz.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Laser-powered electric field probe EFS-Laser

Laser-powered electric field probe EFS-Laser

Rechargeable is already old! The 'Laser Power Supply Electric Field Probe' that doesn't require charging.

• Laser power supply – No charging required • Ultra-small size • High resolution, high speed, low noise • Frequency range: 10KHz-6GHz • Electric field strength 0.1V/m-10kV/m • Wide dynamic range • Continuous real-time data streaming • PC computer interface & software included

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mobile Phone Probe WPT GSM-3G-LTE

Mobile Phone Probe WPT GSM-3G-LTE

High-performance mobile phone probe for electric field measurement in 900/1800/2100 bands.

【Features】 - Specific mobile frequency probe - Isotropic & true effective value measurement - High sensitivity 0.04V/m - High interband attenuation

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wavecontrol Electromagnetic Field Probe WP400-3

Wavecontrol Electromagnetic Field Probe WP400-3

A compact electromagnetic field sensor with a size of only 3cm², capable of measuring both electric and magnetic fields with high precision. Spectrum analysis and FFT measurement are possible.

Complies with IEC/EN62233, IEC/EN62822, and IEC/EN62311 standards. Ideal for measurements where small size and spatial resolution are important. 【Main Features】 - High-precision measurement of electric and magnetic fields with a 3cm² electromagnetic field sensor - Isotropic & true RMS measurement - Spectrum analysis - Equipped with FFT mode - Complies with international standards IEC/EN62233, IEC/EN62822, and IEC/EN62311

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mobile Phone Communication Probe WPT

Mobile Phone Communication Probe WPT

Ideal for evaluating mobile phone base stations. Field strength measurements for 700-900, 1800-1900, 2100, and 2600 bands.

【Features】 - Mobile frequency probe - Isotropic & true effective value measurement - High sensitivity 0.04V/m - High inter-band attenuation - Electric field measurement

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coaxial RF current monitoring probe 10Hz to 600MHz

Coaxial RF current monitoring probe 10Hz to 600MHz

Equipped with a 3dB bandwidth from 400kHz to 600MHz and a very flat response from 1MHz to 200MHz.

**Product Overview** The TBCCP1-400K600 is a coaxial RF current monitoring probe that expands Tekbox's range of affordable EMC pre-compliance testing equipment. This probe features a 3 dB bandwidth from 400 kHz to 600 MHz and a very flat response from 1 MHz to 200 MHz. The transimpedance is characterized over a frequency range of 10 Hz to 100 MHz. The TBCCP1-400K600 is primarily designed as a transducer for passive loop antennas or for measuring RF current in coaxial cables. The probe is equipped with an N connector and can be connected to a standard tripod via an attachment with a ¼ inch screw.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coaxial RF current monitoring probe 10Hz to 100MHz

Coaxial RF current monitoring probe 10Hz to 100MHz

Equipped with a 3dB bandwidth from 3kHz to 100MHz and a very flat response from 9kHz to 30MHz.

【Product Overview】 The TBCCP1-3K100 is a coaxial RF current monitoring probe that expands Tekbox's range of affordable EMC pre-compliance test equipment. This probe features a 3 dB bandwidth from 3 kHz to 100 MHz and a very flat response from 9 kHz to 30 MHz. The transimpedance is characterized over a frequency range of 10 Hz to 100 MHz. The TBCCP1-3K100 is primarily designed for use as a converter for active loop antennas or for measuring RF currents in coaxial cables. The probe is equipped with an N connector and can be connected to a standard tripod via an attachment with a ¼-inch screw.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coaxial RF current monitoring probe 10Hz to 100MHz

Coaxial RF current monitoring probe 10Hz to 100MHz

It shows a very flat response from 2kHz to 70MHz, covering a frequency range from 10Hz to 100MHz.

【Product Overview】 The TBCCP1-2K70 is a coaxial RF current monitoring probe that expands the range of affordable EMC pre-compliance test equipment from Tekbox. This probe exhibits a very flat response from 2 kHz to 70 MHz and is characterized over a frequency range of 10 Hz to 100 MHz. The TBCCP1-2K80 is designed to be used as a transducer for applications that require measuring RF currents in large loop antennas or coaxial cables. With a transimpedance of 0 dBΩ, it complies with the specifications for large loop antennas (LLA) as per CISPR 15 (EN 555015) and CISPR 16-1-4.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF surface current monitoring probe 30kHz to 600MHz

RF surface current monitoring probe 30kHz to 600MHz

It shows a very flat response from 10MHz to 500MHz, covering a frequency range from 9kHz to 600MHz.

**Product Overview** The TBSCP1-10M500 is an RF surface current monitoring probe that expands Tekbox's range of affordable EMC pre-compliance test equipment. This probe exhibits a very flat response from 10 MHz to 500 MHz and is characterized over a frequency range of 9 kHz to 600 MHz. The TBSCP1-10M500 is designed for RF current monitoring applications where it is necessary to measure RF currents flowing on surfaces such as PCB ground planes or traces, metal planes, or wires. The footprint of the RF current monitoring probe is 40 mm x 15 mm. The transfer impedance is -5 dB ohms, and the standard 3 dB bandwidth is from 10 MHz to 500 MHz.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Snap-on bulk current injection probe for industrial products

Snap-on bulk current injection probe for industrial products

Designed for conducted immunity testing primarily in the frequency range of 150 kHz to 230 MHz, in accordance with the standard IEC/EN61000-4-6.

**Product Overview** The TBBCI1-200K280 is a Snap-On bulk current injection probe. The BCI probe is designed primarily for conductive immunity testing in the frequency range of 150 kHz to 230 MHz, in accordance with the standard IEC / EN 61000-4-6. The insertion loss is 8 dB over most of the bandwidth, fully complying with the insertion loss specifications of IEC / EN 61000-4-6. The probe is individually characterized and can be used in the frequency range of 10 kHz to 300 MHz. According to IEC/EN 61000-4-6, it can inject into conductive immunity test setups at severity levels 1, 2, 3, and level X, with a maximum of 30V. This probe can also be used for RF current monitoring applications. The opening of the RF current monitoring probe is 27 mm. The standard insertion loss is 8 dB, and the standard transfer impedance is 26 dB ohms.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Snap-on bulk current injection probe for automotive products

Snap-on bulk current injection probe for automotive products

Designed for conducted immunity testing of automotive products primarily in the frequency range of 1 MHz to 400 MHz according to standard ISO 11452-4.

**Product Overview** The TBBCI1-800K420 is a Snap-On bulk current injection probe. The BCI probe is designed primarily for conducting immunity testing of automotive products in the frequency range of 1 MHz to 400 MHz, in accordance with the standard ISO11452-4. The insertion loss is 5 dB over most of the bandwidth. It complies with the insertion loss specifications of ISO11452-4 in the frequency range of 250 kHz to 230 MHz. The probe is individually characterized and can be used in the frequency range of 10 kHz to 450 MHz. This probe can be used for injections of severity I (60mA), II (100mA), III (150mA), IV (200mA), and customer-specific severity V (up to 350 mA). This probe can also be used for RF current monitoring applications. The opening of the RF current monitoring probe is 27 mm. The standard insertion loss is 5 dB, and the standard transfer impedance is 26 dB ohms.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to probe

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.