press Product List and Ranking from 104 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Apr 29, 2026～May 26, 2026
This ranking is based on the number of page views on our site.

press Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Apr 29, 2026～May 26, 2026
This ranking is based on the number of page views on our site.

  1. 日本製造 Tokyo//Information and Communications
  2. 山本鉄工所 Tokushima//others
  3. 広和 Osaka//Fisheries, Agriculture and Forestry
  4. 4 KURITA MACHINERY MFG. CO., LTD. Osaka//others
  5. 5 エナパック 本社　営業部 Saitama//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

press Product ranking

Last Updated： Aggregation Period:Apr 29, 2026～May 26, 2026
This ranking is based on the number of page views on our site.

  1. Hand Press "H-1L" 日本製造
  2. Warm Water Emergency Shower Unit "Yude~ru" ニック
  3. Press brake die exchange device "Raku rack" タガミ・イーエクス
  4. 4 Super High Pressure Hydraulic Puncher "Royal Master Hydraulic Puncher" 三協
  5. 5 Electric Servo Press Machine "Compact Servo Press" SPC Series エスティック

press Product List

241～270 item / All 279 items

Displayed results
High-quality powder molding servo press "ZENFormer plus"

High-quality powder molding servo press "ZENFormer plus"

Make powder molding more compact and energy-efficient! Reduce power consumption and operating oil volume, while also lowering vibration and noise.

The "ZENFormer plus" is a direct-acting digital servo press machine for powder molding that operates two slides, upper and lower, in a compound manner. Since the motion of both the upper and lower can be freely set, it enables molding using the "withdrawal method," which achieves compression performance equivalent to the double-press method. By adopting a delta configuration that independently controls three axes and a nut drive structure, it has achieved compactness while maintaining parallel control. This parallel control allows for the molding of multiple pieces in ceramics and metal powder applications. Additionally, it generates electricity (regenerative) from the deceleration energy of the servo motor, keeping the power consumption low during continuous operation. 【Features】 ■ Environmentally friendly oil-free hydraulic and regenerative mechanism ■ Reduction in power consumption and operating oil volume ■ Reduced vibration and noise ■ Achieves parallel control with the "delta method," operating the upper and lower using three servo motors and ball screws *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Technology
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Molding Example】CFRTP High Precision Molding

【Molding Example】CFRTP High Precision Molding

Bending, R-shaping, deep drawing, and detailed shaping can also be achieved with high-precision parallel pressing!

We would like to introduce a molding case using the direct drive digital servo press "ZENFormer torque." It enables high-precision molding of carbon fiber resin across various fibers and forms, such as cross materials, UD materials, and non-woven fabrics. High-precision parallel pressing allows for bending, R-forming, deep drawing, and detailed molding. Additionally, in the flat plate molding of CFRTP, the high-precision parallel pressing of this product allows for molding characteristics equal to or better than those achieved with hydraulic presses at less than half the molding load. 【Features of ZENFormer torque】 ■ High-precision molding of carbon fiber resin is possible across various fibers and forms, such as cross materials, UD materials, and non-woven fabrics. ■ In flat plate molding of CFRTP, it achieves molding characteristics equal to or better than those of hydraulic presses at less than half the molding load. *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Technology
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Warm Water Emergency Shower Unit "Yude~ru"

Warm Water Emergency Shower Unit "Yude~ru"

Preparedness eliminates worry. Please use this for initial response during chemical spill.

"Yude~ru" is our unique hot water emergency shower unit that is very easy to operate and can respond quickly in emergencies. With a "just push" simple design that allows for first aid to be administered even a second sooner, it also features an automatic alarm during use to quickly inform those nearby. Additionally, the shower unit can be effectively installed in spaces such as under stairs or next to corridors, and we design it according to the customer's situation. 【Features】 ■ Constant hot water considerate of people ■ Standard equipment included ■ Quick first aid with easy operation ■ Comprehensive service from design to maintenance *For more details, please download the PDF or feel free to contact us.

  • Water Treatment Plant
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hydraulic Press "A-3"

Hydraulic Press "A-3"

Easy integration of automatic machines and dedicated machines! Suitable for pressing, bending, and drawing operations.

Introducing the A Series hydraulic press, model A-3, suitable for pressing, bending, and drawing operations. It is easy to integrate into automatic and dedicated machines. When you release the two-hand push button switch, the ram stops immediately, ensuring safety. Please contact us if you have any inquiries. 【Specifications (partial)】 ■ Pressing capacity: 29.4KN (0.6 tons to 3 tons) ■ Maximum pressure: 10MPa ■ Stroke length: 125mm ■ Open height: 225mm ■ Shank dimensions: φ25×50Lmm *For more details, please feel free to contact us.

  • Prime movers, torque converters, hydraulic equipment, generators
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hydraulic Press "A-5"

Hydraulic Press "A-5"

A device with variable stroke length and pressure capability! Adopts a two-stage feeding system for high and low speeds.

The A-5 is a hydraulic press with a large oil volume and minimal oil temperature rise. It features variable stroke length and pressing capacity, and also adopts a two-speed feeding system. The shank dimensions are φ32×60L. Please contact us if you have any requests. 【Specifications (partial)】 ■ Pressing capacity: 49KN (1.5 tons to 5 tons) ■ Maximum pressure: 10MPa ■ Stroke length: 150mm ■ Open height: 250mm ■ Shank dimensions: φ32×60L *For more details, please download the PDF or feel free to contact us.

  • Prime movers, torque converters, hydraulic equipment, generators
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small Press "NSC-06"

Small Press "NSC-06"

Equipped with an electromagnetic clutch brake! Stroke length 20mm, stroke rate 200 spm.

We would like to introduce our CB NSC series model 'NSC-06'. This is a small press with a cast iron frame and a bed separation type, which can be integrated into automatic machines and dedicated machines. The bed dimensions are 190×115mm. Please contact us if you have any inquiries. 【Specifications (partial)】 ■ Capacity: 5.8KN (600Kg) ■ Stroke length: 20mm ■ Stroke rate: 200spm ■ Die height: 110mm ■ Slide area: 70×46mm ■ Slide adjustment amount: 15mm *For more details, please download the PDF or feel free to contact us.

  • Prime movers, torque converters, hydraulic equipment, generators
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Press with rotary table 'NSCR-06/CBR-1・3'

Press with rotary table 'NSCR-06/CBR-1・3'

A base machine that can be used as a dedicated machine! Supply units and extraction units can be easily attached.

We would like to introduce our rotary table press, 'NSCR-06/CBR-1/CBR-3'. By adopting a roller gear index, it achieves low noise, high speed, and high precision. Developed as a rotary table for presses, it is a high-precision indexing machine with minimal deflection under load. Please feel free to contact us if you have any inquiries. 【Features】 ■ Adopts a roller gear index, achieving low noise, high speed, and high precision ■ Base machine that allows easy installation of supply units, extraction units, etc., enabling use as a dedicated machine ■ Developed as a rotary table for presses, it is a high-precision indexing machine with minimal deflection under load *For more details, please download the PDF or feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hand Press "H-1"

Hand Press "H-1"

Load cell attached for load management! By installing a ratchet mechanism, processing errors are reduced.

The "H-1" is a hand press suitable for precise pressing, grommeting, and crimping. It uses bearings and metal in the rotating parts and is equipped with a ram stop mechanism. The handle can be attached on either side and its length can also be adjusted. Additionally, the frame is made of aluminum, making it lightweight. Please feel free to contact us when you need assistance. 【Features】 - Open height and stroke can be freely set - Bearings and metal are used in the rotating parts - Equipped with a ram stop mechanism - Handle can be attached on either side and length can be adjusted - Lightweight due to aluminum frame *For more details, please download the PDF or feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hand Press "T-2"

Hand Press "T-2"

Equipped with a ram stop mechanism! By attaching a load cell, it reduces work errors and enables load management.

The "T-2" is a hand press suitable for bending, crimping, pressing, and stamping processes that require power. It employs a toggle mechanism that generates a large force with a small effort. It allows for precise work with a settable bottom dead center, and the handle can be mounted on either side. Additionally, it can be customized with features such as a sliding table or an indexing table. Please feel free to contact us for inquiries. 【Features】 ■ Allows for precise work with a settable bottom dead center ■ Employs a toggle mechanism that generates a large force with a small effort ■ Sliding parts are made of metal ■ Equipped with a ram locking mechanism ■ Handle can be mounted on either side *For more details, please download the PDF or feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hand Press "T-3"

Hand Press "T-3"

Dead point setting is possible, allowing for precise work! Adopts a toggle mechanism that delivers great power with minimal effort.

The "T-3" is a hand press suitable for bending, crimping, pressing, and stamping processes that require power. It comes with a ram locking mechanism, a sliding table, and an indexing table, allowing for special adaptations to meet customer requests. Additionally, by attaching a load cell, it is possible to reduce operational errors and manage load effectively. Please feel free to contact us when you need assistance. 【Features】 ■ Precise work is possible with adjustable bottom dead center setting ■ Toggle mechanism that delivers high force with minimal effort ■ Sliding parts made of metal ■ Equipped with a ram locking mechanism ■ Handle can be mounted on either side *For more details, please download the PDF or feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ratchet Hand Press

Ratchet Hand Press

Introducing a hand press compatible with the H series as an option! Made in Japan.

We would like to introduce the "Ratchet Hand Press" that we handle. By adopting a ratchet mechanism, it allows for quality control. The handle cannot be returned until it reaches the set bottom dead center, preventing operational mistakes. Please feel free to contact us when you need assistance. 【Features】 ■ Prevents operational mistakes as the handle cannot be returned until it reaches the set bottom dead center ■ Enables quality control through the adoption of a ratchet mechanism *For more details, please download the PDF or feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Press with rotary table "AR-3/AR-5/AR-10"

Press with rotary table "AR-3/AR-5/AR-10"

Adopting a roller gear index, achieving low noise, high speed, and high precision!

The "R Series AR-3/AR-5/AR-10" is a rotary table press that can easily accommodate supply units, extraction units, and more, allowing it to be used as a dedicated machine. Developed as a rotary table for presses, it is a high-precision indexing machine with minimal deflection under load. Please feel free to contact us when you need assistance. 【Features】 ■ Adopts a roller gear index to achieve low noise, high speed, and high precision ■ A base machine that allows for easy installation of supply units, extraction units, etc., and can be used as a dedicated machine ■ Developed as a rotary table for presses, it is a high-precision indexing machine with minimal deflection under load * For more details, please download the PDF or feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CD press

CD press

Music that heals the heart

D Press physically engraves digital data onto each disc, providing high-quality audio and data. It allows for large-scale production and also excels in cost performance.

  • others
  • Label printer
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Hot Press" [Hydraulic Press]

"Hot Press" [Hydraulic Press]

It is a hydraulic press capable of handling various severe and demanding research and development tasks as an experimental hot press.

This product is a high-performance experimental press capable of handling various severe and demanding research and development tasks. [Hydraulic Press] The main heat sources used are steam, oil heat, and electric heat. With hot and cold pressing, it is possible to heat the heated plates while maintaining compression and to change to cooling. [Examples of various functions and specifications] ■ Main heat sources - Steam (110°C to 170°C), - Oil heat (ambient temperature to 230°C), - Electric heat (ambient temperature to 400°C) ■ Hot and cold press ■ Steam injection *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Forming press (hydraulic + servo composite press machine)

Forming press (hydraulic + servo composite press machine)

By using a horizontal press format, positioning is determined by a servo motor, and pressure is controlled hydraulically, making it energy-efficient. [Press Machine]

This product is a press machine that realizes the rationalization of the molding process, reduction of cycle time, and optimization of molding by converting from a conventional vertical molding press (opening and closing vertically) to a horizontal molding press (opening and closing horizontally). It adopts a hybrid hydraulic system that combines hydraulic power and servo motors. With a track record of manufacturing over 4,000 vertical presses and high-precision processing, it achieves high-precision molding through dedicated horizontal molding guides. 【Features】 ■ Hybrid operation ■ Flexible pressure application ■ High-precision molding of large products ■ High-cycle molding ■ Compatibility with various specifications *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hot press (press machine with conveyor)

Hot press (press machine with conveyor)

It is also possible to automatically insert products lined up on the conveyor before the press into the press and to carry out the products after pressing. 【Press Machine】

The "YAMAMOTO Hot Press (with Conveyor)" is a hot press equipped with a conveyor for inserting and removing products within the press. It can automatically insert products lined up on the conveyor before the press into the press for processing. Depending on the application, various types of belts such as steel belts, Teflon sheets, and polyester sheets can be selected. 【Features】 - Equipped with a conveyor for inserting and removing products within the press - Automatically inserts products lined up on the conveyor into the press for processing - Various belt options available according to the application *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hot Press "Palette Welding Machine (Electric Heater Type)" [Hydraulic Press]

Hot Press "Palette Welding Machine (Electric Heater Type)" [Hydraulic Press]

It is a hot press (hydraulic press) that fuses two half pallets into a single integrated pallet.

This is a hot press with an electric heater type heating plate that moves back and forth to melt materials. It is a hot press (hydraulic press) capable of performing uniform pressing in a series of operations using a servo motor. Mainly, the welding sizes are for products of 1. 1100mm x 1100mm and 2. 1400mm x 1100mm, but the size and pallet rib shape can be designed according to consultation. *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hydraulic Press: Large Hot and Cold Press

Hydraulic Press: Large Hot and Cold Press

We manufacture a large hot press with a conveyor for panel production (hydraulic press).

Automatically inserts products lined up on the conveyor before the press into the press for pressing. 【Hydraulic Press】 Depending on the application, various types of belts such as steel belts, Teflon sheets, and polyester sheets can be selected. 【Features】 ■ Equipped with a conveyor for inserting and removing products inside the press ■ Automatically inserts products lined up on the conveyor into the press for pressing ■ Various types of belts can be selected according to the application

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hot Press (Electric Type) [Press Machine]

Hot Press (Electric Type) [Press Machine]

Low pressure compatible, oil-free (no hydraulic oil required) type.

■Features■ - Excellent for small rod products. - Capable of low pressure. (Not suitable for high pressure) - Can accommodate small to large products. - Easy maintenance. *For more details, please feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Press for manufacturing polyurethane foam panels【Press machine】

Press for manufacturing polyurethane foam panels【Press machine】

Low pressure compatible, oil-free (no hydraulic oil required) type.

■Features■ - Excellent for small rod products. - Low pressure is possible. (Not suitable for high pressure) - Capable of small to large products - Easy maintenance *For more details, please feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Urethane foam insulation panel manufacturing press [Hydraulic press]

Urethane foam insulation panel manufacturing press [Hydraulic press]

Polyurethane foam insulation panel manufacturing press (hydraulic press)

■Features■ ●Easy to Inject Urethane Resin To facilitate the urethane resin injection process, a frame structure with a wide opening and hydraulic piping is consolidated and installed at the top of the press. ●Accurate and Simple Press Control By adopting a programmable sequencer, temperature, pressure, and time can be automatically controlled to ensure optimal foaming conditions at all times. The heat source can be selected from two types: thermal oil heater and hot water. ●No Need for Specific Installation Locations with Upper Ram Type Due to the upper ram design, there is no need to dig a pit for the cylinder, allowing for flexible installation locations for the press. Additionally, there is no need for foundation work. ●High Workability The adoption of various stop mechanisms during the press's ascent and descent significantly improves workability. 【Hydraulic Press】 *For more details, please feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ideal for research and development, experimentation, and new product testing! Laboratory test hydraulic press.

Ideal for research and development, experimentation, and new product testing! Laboratory test hydraulic press.

Special specifications (steam injection type) that can be realized because they are made to order, suitable for special applications (research, development, experiments, test presses, hydraulic presses).

This is a high-performance test press capable of handling various severe and demanding research and development, experiments, and product prototypes. 【Examples of various functions and specifications】 ■ Main heat sources - Steam (110°C to 170°C), - Oil heat (ambient temperature to 230°C), - Electric heat (ambient temperature to 400°C) - Low to high temperature ■ Hot and cold press You can change the heating of the heated plates to cooling while maintaining pressure. Heat sources: Steam + cooling water Electric heating + cooling water ■ Steam injection A system that injects steam from the surface of the heated plate ■ Dimensions - Small to large ■ Pressure - Up to 5 tons possible ■ Other options and diverse functions - Available upon request. *Due to the impact of the COVID-19 virus, if it is difficult to meet in person, we also accept meetings and consultations via web conference. Additionally, experiments and prototypes using our lab equipment are possible. 【Hydraulic Press】 *For more details, please download the catalog or feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lab Press "LP3000 Series"

Lab Press "LP3000 Series"

Consideration of temperature distribution accuracy at the design stage! A safety start system that requires both hands to operate!

The "LP3000 Series" is a hydraulic lab press designed for vulcanizing rubber samples for laboratory testing, contributing to stable measurement reproducibility. It complies with international standards such as ISO, ASTM, DIN, and GB. Additionally, it meets the stringent temperature accuracy set by the ISO TC45 Working Group with the optional temperature accuracy of ±0.5℃. It features a closed-circuit low-noise hydraulic system, with a low oil consumption of 8-15 liters and a maximum pressure of 40MPa (400bar). 【Features】 ■ High stability with a robust four-column design ■ Stainless steel press platens and tension bars ■ Digital PID temperature control ■ Air-operated front safety shield ■ Control via a 5" color touch panel LCD *For more details, please refer to the PDF materials or feel free to contact us.

  • Other measuring instruments
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Set press buying and selling is a used machinery dot com used machinery buying and selling site.

Set press buying and selling is a used machinery dot com used machinery buying and selling site.

Set press buying and selling is done by Used Machinery Dot Com. As a company specializing in buying and selling used equipment, we can offer high prices for purchases.

Leave the purchase appraisal and sales of set presses to KOEI SANGYO at used-machinery.com! KOEI SANGYO has many sales channels, not only direct sales routes to users and domestic sales routes through years of experience in used machinery sales, but also direct exports overseas. We thoroughly manage costs, avoid unnecessary inventory, and do not maintain unnecessary warehouses, optimizing many costs to reflect even a little in the purchase price for our customers. We operate many press machines in a short period, even with thin profit margins and high sales volume.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water treatment machinery equipment "Link-Belt type sludge scraper"

Water treatment machinery equipment "Link-Belt type sludge scraper"

By standardizing components, we are achieving short delivery times and low costs!

We would like to introduce Asahi Kiko's "Link Belt Type Sludge Scraper." We have numerous achievements with various types of sludge scrapers, including those made from semi-plastic and all-plastic materials, as well as traditional steel shafts and chains. Additionally, our parts are standardized to adhere to our motto of "faster and cheaper." 【Achievements】 <Shafts and Chains> ■ Traditional steel ■ Semi-plastic ■ All-plastic, etc. *For more details, please refer to the PDF materials or feel free to contact us.

  • Turbid water and muddy water treatment machines
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[NETIS Registration] High-Performance Vinyl Compressor Heat Press

[NETIS Registration] High-Performance Vinyl Compressor Heat Press

Easily compress bulky vinyl to about 1/50! A high-performance vinyl compressor registered with NETIS!

The "Heat Press" is a high-performance vinyl compactor that heats and compresses vinyl waste such as packaging materials and protective sheets to produce vinyl blocks. With an astonishing reduction rate of about 1/20 to 1/50, the solidified vinyl blocks are reborn as resources such as recycled fuel and reclaimed materials. 【Features】 ◆ Astonishing reduction rate of about 1/20 to 1/50 ◆ Reduction of industrial waste ◆ Promotion of recycling and environmental impact reduction activities ◆ NETIS CB120010-A certification 【For more details, please download the catalog or feel free to contact us】

  • Air compressors, blowers and pumps
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case Study of the SAKA Personal Compressor: Silent, Ultra-Compact, and Energy-Saving

Case Study of the SAKA Personal Compressor: Silent, Ultra-Compact, and Energy-Saving

The possibilities are endless! A compact compressor that can be used for a wide range of applications!

In the "SAKA Personal Compressor Case Studies," we introduce the achievements of our small compressors and customer feedback from various industries. The SAKA Personal Compressor can be integrated into various machines. It can also be incorporated into marking machines, presses, and riveting machines. Additionally, we have received feedback from customers stating that it can be safely used in hospital wards due to its quiet operation. 【Features】 - Ideal as an air supply source for production equipment considerations - Compact and lightweight, making it perfect for experimental devices - Can be implemented in facilities such as hospitals - Integrated air source for cream soldering robots - Can be embedded in various machines For more details, please contact us or download the catalog.

  • Garbage disposal, central dust collection, laundry, compressor
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
●Small compressor '100RND' AC100V [Cost reduction]

●Small compressor '100RND' AC100V [Cost reduction]

The small compressor 100RND operates on AC100V, is oil-free, and can handle a variety of applications! It has a proven track record and is effective for cost reduction! Maintenance is also easy!

The small compressor "100RND" is a piston-type compressor for AC100V! With its double-head and parallel design, it offers a rich flow rate. Being an oil-less small compressor, it does not contain oil in the exhaust, making it suitable for a wide range of applications such as industrial equipment, medical devices, and beauty equipment. It is highly reliable and has a proven track record of being integrated into many customers' devices. Additionally, maintenance such as parts replacement is easy and can be done simply. *Other models are also available, including "15RNS," "40RNS," and the brushless motor type "15RNS-BLDC." 【Features of the Small Compressor 100RND】 ■ Compact, lightweight, and low noise ■ Cost reduction possible ■ Oil-free ■ Usable at high vacuum levels ■ Continuous operation possible ■ Built-in thermal protector ■ Trusted domestic installation track record ■ Easy maintenance ■ Compatible with various models based on capacity *Please start by downloading the PDF materials! For more details, feel free to contact us via email or phone for any inquiries!

  • pump
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Half Press "BH-80"

Half Press "BH-80"

A press machine with only the head of a standard press machine! Specifications can be customized according to customer requirements.

We would like to introduce our half press, the 'BH-80'. It allows for material feeding from both the X and Y directions, enabling combination processing within the die. You can freely design the die height and bolster dimensions. Additionally, it is easy to integrate into dedicated machines. Please feel free to contact us if you have any inquiries. 【Features】 ■ A press machine that consists only of the head part of a standard press machine ■ Easy integration into dedicated machines ■ Freely designable die height and bolster dimensions ■ Enables combination processing within the die by feeding materials from the X and Y directions *For more details, please download the PDF or feel free to contact us.

  • others
  • press

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to press

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.