plug Product List and Ranking from 40 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

plug Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. Hoshin Co., Ltd. Osaka//Building materials, supplies and fixtures manufacturers
  2. 鬼頭忠兵衛商店 Aichi//Building materials, supplies and fixtures manufacturers
  3. カンツール 本社 Tokyo//Trading company/Wholesale
  4. 4 スワレント Kanagawa//Service Industry
  5. 5 南海プライウッド Kagawa//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

plug Product ranking

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. Maximum 2400mm compatible! Drain pipe stop plug 'Stop Ball' Hoshin Co., Ltd.
  2. KM-type Simple Water Stop Plug 'KMQ Model' 鬼頭忠兵衛商店
  3. Reform: Fixed plug for gypsum board that allows shelf posts to be installed without wooden framing. 南海プライウッド
  4. 4 GRIP TIGHT (Pressure Test Plug for Piping and Pipes) テクネ商事
  5. 4 ALC male thread plug "Double X Anchor" ケー・エフ・シー

plug Product List

181～195 item / All 229 items

Displayed results
H-shaped latch Cat5e UTP plug

H-shaped latch Cat5e UTP plug

Measures to prevent latch breakage! Introducing the modular plugs we handle.

We would like to introduce the "Henoji Latch Cat5e UTP Plug" that we handle. The insulation resistance is 500 megaohms, the withstand voltage is 500 VAC, and the operating temperature range is -40°C to +125°C. Please consider adopting it as a measure to prevent latch breakage. 【Specifications (partial)】 ■ Raw materials - Housing: Polycarbonate (UL94V-0) - Contact: Phosphor bronze (3-prong type contact) - Contact plating: 100μ inch nickel underplating, 50μ inch gold plating *For more details, please refer to the related links or feel free to contact us.

  • Parts and Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cat8 Series Straight Die-Cast FTP Plug

Cat8 Series Straight Die-Cast FTP Plug

Easy assembly with tool-less design! Compatible with cable sheaths from 7.0 to 8.5mm.

We would like to introduce the "Cat8 Series Straight Die-Cast FTP Plug" that we handle. It is fully compliant with IEEE802.3bq and Ethernet 25G/40G BASE-T. The FTP type strongly prevents alien crosstalk and protects against electromagnetic interference (EMI/RFI) and other radio frequency disturbances. 【Features】 ■ Nickel-plated zinc die-cast ■ IDC is compatible with AWG22-24 (1.02-1.65mm) for both solid and stranded wires ■ Suitable for cable outer diameters from 7.0 to 8.5mm *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cat6A RJ45 modular plug

Cat6A RJ45 modular plug

You can terminate on-site! Introducing our products that support both UTP and STP.

We would like to introduce the "Cat6A RJ45 Modular Plug" that we handle. It has electrical characteristics with a contact resistance of 20mΩ Max. and an insulation resistance of 500mΩ Min. The Cat6A plug, which requires delicate and careful processing, has been designed to be processed on-site. *Compatible with both UTP and STP. 【Standards】 ■ISO/IEC 11801-1 Ed1.0 2017-11 ■IEC 60603-7-41/51 ■EN 50173-1 ■ANSI/TIA-568.2-D ■PoE (IEEE 802.3af), PoE+ (IEEE 802.3at), 4 PPoE (IEEE 802.3bt) ■IEC 60512-99-001/002 *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plug & Produce Multi-Purpose Gripper 'RG2/RG6'

Plug & Produce Multi-Purpose Gripper 'RG2/RG6'

Supports various sizes and materials such as plastic, metal, cardboard, and glass!

We would like to introduce the 'RG2/RG6' that we handle. It is a highly adaptable gripper that can be widely used for various sizes and shapes. The introduction time, which used to take a day, has been shortened to one hour. Since it is a gripper that can be used right out of the box and is easy to install, programming time can be reduced by 70%. 【RG2 Technical Specifications (Excerpt)】 ■ Gripping Force (Adjustable) - Minimum: 3N Maximum: 40N ■ Gripping Speed - Minimum: 38mm/s Maximum: 127mm/s ■ Gripping Time - Minimum: 0.06 seconds Maximum: 0.21 seconds ■ IP Rating: IP54 *For more details, please refer to the PDF document or feel free to contact us.

  • Other Software
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cover for Large Plug & Hoist Controller '453L'

Cover for Large Plug & Hoist Controller '453L'

Preventing power-on due to accidents

For more details, please refer to the catalog or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-pressure injection water stop plug 'NICK9-P'

High-pressure injection water stop plug 'NICK9-P'

Ideal for repairing leaks in civil engineering and architectural structures! It can completely fill fine gaps.

"NICK9-P" is a high-pressure injection waterproofing plug designed by professionals in water stop construction, making it ideal for repairing leaks in architectural structures and similar applications. With the high-pressure injection method, it can completely fill even the smallest gaps. Additionally, because a check valve is pre-installed, the waterproofing work can be done easily. Set at a length of 100mm, it minimizes the risk of concrete damage during high-pressure injection, and the repair marks are small and inconspicuous due to the 10mm diameter packer. 【Features】 ■ Reliable waterproofing ■ Improved work efficiency ■ Does not damage structures ■ Maintains aesthetic appearance *For more details, please refer to the PDF document or feel free to contact us.

  • Waterproofing Agent
  • Waterproofing work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction to the "Bevel Plug Injection Method"

Introduction to the "Bevel Plug Injection Method"

A construction method developed to reliably fill the area near rebar with injection material, which is the root cause of deterioration progression.

At Nippon Poliment Industry Co., Ltd., we offer the "Bevel Plug Injection Method," which uses a dedicated plug called "Bevel Plug" to inject fine particle cement-based materials into cracks that occur in concrete structures. By injecting the material directly and continuously, it can be applied to a wide range of cracks from approximately 0.2 mm to 5.0 mm in width. Additionally, it can be easily attached to a Φ10.5 mm drilled hole with a one-touch mechanism, and it is equipped with a check valve function to prevent backflow of the material after injection. 【Features】 ■ One-touch attachment plug that does not require special tools ■ Reliable and clean installation of injection holes using a water flow drill ■ Cartridge-type cement-based sealing and injection materials *For more details, please download the PDF or contact us.

  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Available for rental with just one phone call: Waterproof plug 'Piro Muniboru'

Available for rental with just one phone call: Waterproof plug 'Piro Muniboru'

Available for rental from the 1st; can be folded and inserted from a manhole.

We would like to introduce our "Piro Muniboru." It is a water-stopping plug made of natural rubber reinforced with Kepler, suitable for large and medium diameters. The air injection pressure is 0.09 MPa for general use and 0.02 MPa during testing, with a weight of 29 kg. Please feel free to consult us when you need assistance. 【Specifications】 ■ Durability Back Pressure - Maximum Water Head Pressure: 5.0 m (φ800–1,200 mm) - Allowable Safe Water Head Pressure: Within 4.0 m (φ800–1,200 mm) ■ Contraction - Diameter (Width): 1,230 mm (φ800–1,200 mm) - Length: 2,500 mm (φ800–1,200 mm) *For more details, please refer to the PDF document or feel free to contact us.

  • Hydrological survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SAVA plug φ350mm to φ600mm <with bypass>

SAVA plug φ350mm to φ600mm <with bypass>

Weight is 20kg! Comes with a bypass cap, making it usable for water change work as well.

We would like to introduce our rental equipment (water stop equipment) "SAVA Plug φ350mm – φ600mm (with bypass)." The bypass coupler is available in 4 inches or 6 inches. The maximum allowable back pressure is 0.060MPa for air and 6.0m for water head, with an applicable range of φ350mm to φ600mm. It is equipped with a bypass that can also be used for water replacement work. Please feel free to contact us when you need it. 【Specifications (partial)】 ■ Bypass coupler: 4 inches or 6 inches ■ Applicable range: φ350mm – φ600mm ■ Maximum allowable back pressure ・ Air: 0.060MPa ・ Water head: 6.0m * For more details, please download the PDF or feel free to contact us.

  • Water and sewerage pipe fittings
  • Water Treatment Plant

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SAVA plug φ500mm to φ1000mm <with bypass>

SAVA plug φ500mm to φ1000mm <with bypass>

Bypass couplers are available in 4 inches or 8 inches! Introducing our rental equipment.

We would like to introduce our rental equipment (water stop equipment) "SAVA Plug φ500mm – φ1000mm (with bypass)." The dimensions when contracted are an outer diameter of 472mm, a length of 1,230mm, and a weight of 41kg. The bypass coupling is available in 4 inches or 8 inches. It comes with a bypass cap, making it suitable for water replacement work as well. Please feel free to contact us when you need it. 【Specifications (partial)】 ■ Bypass coupling: 4 inches or 8 inches ■ Applicable range: φ500mm – φ1000mm ■ Maximum allowable back pressure ・ Air: 0.060MPa ・ Water head: 6.0m *For more details, please download the PDF or feel free to contact us.

  • Water and sewerage pipe fittings
  • Water Treatment Plant

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pylon plug φ800mm to φ1200mm

Pylon plug φ800mm to φ1200mm

The dimensions when contracted are a diameter (width) of 1,230mm and a length of 2,500mm! It can accommodate large pipes and can be folded for insertion through a manhole.

We would like to introduce our rental equipment (water-stopping equipment) "Pillow Plug φ800mm to φ1200mm." It can be bent, allowing for installation even from narrow insertion points. Made of urethane, it has excellent chemical resistance and oil resistance. It can also accommodate large pipes and can be folded for insertion through manholes. Please feel free to contact us when you need our services. 【Features of the Pillow Plug】 ■ Can be bent, allowing for installation from narrow insertion points ■ Made of urethane, offering excellent chemical and oil resistance ■ Usable for ductile cast iron pipes and more *For more details, please download the PDF or feel free to contact us.

  • Water and sewerage pipe fittings
  • Water Treatment Plant

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to plug

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.