panel Product List and Ranking from 720 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.

panel Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.

  1. アイカ工業 Aichi//Building materials, supplies and fixtures manufacturers
  2. クリオン Tokyo//Building materials, supplies and fixtures manufacturers
  3. ウォーターパール Tokyo//Building materials, supplies and fixtures manufacturers
  4. 4 ニチモクファンシーマテリアル Shiga//Building materials, supplies and fixtures manufacturers
  5. 5 FPコーポレーション 本社 Hokkaido//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

panel Product ranking

Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.

  1. Aqua Wall Panel - A New Form of Waterfall - ウォーターパール
  2. Touch it without getting wet! No water supply or drainage needed! Showcasing 'Acrylic Waterfall Panel'
  3. Self-closing sliding resin frame door ソーゴ 東京支店
  4. 4 Ortinoluber アイカ工業
  5. 5 Smart Sanitary U Catalog アイカ工業

panel Product List

421～435 item / All 1795 items

Displayed results
DDD Panel: ALC Panels for High-rise and Super High-rise Buildings

DDD Panel: ALC Panels for High-rise and Super High-rise Buildings

Factory-embedded anchor panels for the exterior walls of high-rise and super high-rise buildings exceeding 31 meters in height.

The "DDD Panel" is a factory-embedded anchor panel designed for the exterior walls of high-rise and super high-rise buildings exceeding 31 meters in height. The target wind pressure is ±6,000 N/m² or less, and the panel width ranges from 600 to 300 mm in 10 mm increments. It is mainly used for the exterior walls and partition walls in vertical wall rocking construction (CDR method), super high-rise rocking construction (Kryon Hyper Power Wall), and horizontal wall anchor construction. 【Features】 ■ Suitable for high-rise buildings ■ Designed for exterior walls of high-rise and super high-rise buildings exceeding 31 meters in height ■ Target wind pressure: ±6,000 N/m² or less *For more details, please refer to the PDF materials or feel free to contact us.

  • ALC
  • panel
  • Concrete block, ALC panel, extrusion molded cement board construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metal-free exterior ALC panel "Invisi Panel"

Metal-free exterior ALC panel "Invisi Panel"

No exposed metal, enhancing aesthetics! Panels that smartly accommodate fireproof partitions and bay window system side walls.

The "Invisipanel" is a factory-embedded anchor panel limited to a thickness of 100mm, designed primarily for balcony fire separation walls and bay window system panels in mid-rise to high-rise buildings, such as RC (reinforced concrete) residential buildings. The target wind pressure is below ±4,000N/m², and upon completion of panel installation, the hardware at the top and bottom of the panel is not exposed, significantly enhancing aesthetic appearance. This product is mainly used in locking-type exterior walls. 【Features】 ■ Hardware-free design ■ Target wind pressure: below ±4,000N/m² ■ No exposed hardware, improving aesthetics ■ Adopted in locking-type exterior walls *For more details, please refer to the PDF document or feel free to contact us.

  • ALC
  • panel
  • Concrete block, ALC panel, extrusion molded cement board construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ALC panel for exterior walls compatible with bay windows, "Bay Window System Panel"

ALC panel for exterior walls compatible with bay windows, "Bay Window System Panel"

No need for reinforcing steel materials to strengthen panels and fixtures! You can create a neat configuration for the exterior corridor space.

The "Bay Window System Panel" is a factory-embedded anchor panel limited to a thickness of 100mm, targeting bay windows primarily in RC (reinforced concrete) residential buildings, ranging from low to high-rise structures. The applicable wind pressure is below ±6,000N/m2, and it consists of a top panel and side wall panels. Since no reinforcing steel is required for the panels or fixtures, it allows for a simple and clean wall composition. 【Features】 ■ Compatible with bay windows ■ Applicable wind pressure: below ±6,000N/m2 ■ Composed of top panel and side wall panels ■ No reinforcing steel required for panels or fixtures ■ Allows for a simple and clean wall composition *For more details, please refer to the PDF document or feel free to contact us.

  • ALC
  • panel
  • Concrete block, ALC panel, extrusion molded cement board construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ALC panel for exterior wall corners 'DS Corner Panel'

ALC panel for exterior wall corners 'DS Corner Panel'

Beautifully finish the exterior of the building! Factory-embedded anchor panels with an L-shaped cross-section.

The "DS Corner Panel" is a factory-embedded anchor panel with an L-shaped cross-section designed for the exterior corner sections of low to mid-rise buildings with a height of 31m or less. The target wind pressure is a positive wind pressure of 2,400 N/m² or less and a negative wind pressure of 1,600 N/m² or less. When used in conjunction with the "DS Panel," it allows for a neat finish at the corner sections, enhancing the building's exterior appearance. 【Features】 ■ Suitable for low to mid-rise buildings ■ Neatly finishes corner sections (also used with DS Panels) ■ Beautifies the building's exterior *For more details, please refer to the PDF materials or feel free to contact us.

  • ALC
  • panel
  • Concrete block, ALC panel, extrusion molded cement board construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ALC panel "BS Corner Panel" for the corner sections of railings on balconies and similar areas.

ALC panel "BS Corner Panel" for the corner sections of railings on balconies and similar areas.

Balconies of mid-rise buildings, etc.! Factory-embedded anchor panels targeting the corners of handrail walls.

The "BS Corner Panel" is a factory-embedded anchor panel with an L-shaped cross-section designed for the corner areas of handrails on balconies and similar structures in low to mid-rise buildings with a height of 31m or less. The target wind pressure is 3,300N/m² or less for both positive and negative wind pressures. When used in conjunction with the "BS Panel," it ensures that reinforcing steel materials are not exposed on the inside of the balcony upon panel installation completion, enhancing aesthetic appeal while neatly finishing the corner areas and beautifully completing the building's exterior. 【Features】 ■ Suitable for balconies ■ Target wind pressure: ±3,000 or less ■ Neatly finishes corner areas (when used with BS Panel) ■ Beautifies the building's exterior *For more details, please refer to the PDF document or feel free to contact us.

  • ALC
  • panel
  • Concrete block, ALC panel, extrusion molded cement board construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulated wall panel "Styro Wall" *Ideal for warehouses and factories!

Insulated wall panel "Styro Wall" *Ideal for warehouses and factories!

There are construction examples! High strength enables the simplification of the framework, making it an ideal insulated wall panel for warehouses, factories, and agricultural facilities that achieve reduced construction time and cost!

The insulation wall panel "StyroWall" is a next-generation composite panel that combines high insulation, low cost, and design versatility. With steel plates on both sides and a unique joint method, its strength has dramatically increased compared to conventional panels. The framing can be significantly simplified, making installation easy. This helps reduce overall construction costs. 【Features】 ■ Achieves high insulation, high airtightness, and high strength with a unique joint method! ■ Various surface materials can be selected according to different applications, including design, weather resistance, and ammonia resistance! ■ Strong and beautiful with steel plates on both sides and a completely flat surface! ■ Manufacturing costs are significantly reduced through efficiency improvements, including logistics! ■ The catalog includes examples of installations! *For details, please download the catalog or contact us directly.

  • Smokeproof wall
  • glue
  • Insulation work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulated roof panel "StyroRoof" *Significantly reduces construction costs!

Insulated roof panel "StyroRoof" *Significantly reduces construction costs!

A high-strength panel that reduces the amount of main building materials, lowers construction costs, and features insulated roof panels that shut out leaks even during typhoons and heavy rain!

The insulated roof panel "Styro Roof (BL)" is a boltless structure that incorporates bolts into the fitting parts. The high-strength panel achieves a maximum rafter pitch of 1,200 mm, significantly contributing to a reduction in construction costs. 【Features】 ■ High-strength panel: Allows for a significantly wider rafter spacing ■ Boltless: Reduces snow accumulation and provides a beautiful finish ■ Double-sided steel panel: Prevents rodent damage ■ High water tightness: Prevents leaks with a unique fitting method *For more details, please download the catalog or contact us directly.

  • Shingle, bark and grass roofs
  • Ceiling panels and decorative panels

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Underground Dry Insulation Double Wall "Styrogalva Funen/SJ"

Underground Dry Insulation Double Wall "Styrogalva Funen/SJ"

Underground double wall cement board and block wall alternatives. Insulation panels that require no base and no screws for easy installation.

"Styrogalva" is a panel that combines design, constructability, and thermal insulation, serving as a double wall for groundwater measures in underground spaces. It can replace double walls made of cement boards and concrete blocks, stands independently with only upper and lower rails, and can be manufactured and installed in a single piece up to 6 meters. Due to its construction method that requires no base material and no panel screws, it enables shortened construction periods and labor-saving installation. In addition to achieving easy and speedy construction, it uses high-performance insulation material in its core, significantly contributing to condensation prevention. [Features] ■ Beautiful design that changes the concept of underground spaces ■ Good constructability, short construction period, and economical ■ Styrogalva has obtained non-combustibility certification ■ Achieves strong wall strength ■ The surface material uses painted hot-dip galvanized steel sheets that are resistant to rust and dirt ■ The embossed steel sheet surface material prevents reflection from lights such as those in automobiles *For more details, please refer to the materials. Feel free to contact us with any inquiries.

  • Insulation work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wooden Roof Insulation Board "Mira Woody"

Wooden Roof Insulation Board "Mira Woody"

"Mirawood" is an accordion type that is easy to install!

Enhance the insulation effect of homes with heat shielding and airtightness. Prevent condensation with excellent insulation properties. 【Main Features】 ■ Thermal conductivity of 0.032 W/m·K or less ■ Easy installation with just a cutter due to the accordion shape ■ Seamless processing that prevents insulation gaps ■ Excellent heat shielding achieved with aluminum surface finishing

  • Heat shielding sheet

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
LED sign panel equipped with air purification function.

LED sign panel equipped with air purification function.

Uses NeoPixel LEDs. Achieves color rendering of light according to your preference. Also equipped with air purification functionality.

We offer LED sign panels equipped with air purification functions. Using NeoPixel LEDs, they allow for dimming control and customizable color rendering according to your preferences. The air purification function is also included, providing excellent air cleaning effects thanks to the UV-A LED. Custom PCB design is available to enhance functionality further. 【Features】 ■ Energy-saving with pulse irradiation control ■ Ability to express a "flicker" like that of a candle ■ High air purification effectiveness using Nichia Chemical's UV-A LEDs ■ Custom integration options available upon request *For more details, please refer to the materials. Feel free to contact us with any inquiries.

  • LED light source/module

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Narrow-width module "Eclipse"

Narrow-width module "Eclipse"

High power generation efficiency for increased output! Module with a narrow width of 415mm adopted.

"Eclipse" is a module that adopts a width of 415mm, making it ideal for solar sharing, and achieves a conversion efficiency of 18.1%. By introducing a new electrical design, the heat generation under the same conditions is reduced to half that of conventional modules, decreasing internal losses and significantly lowering the risk of hotspot occurrence. With high power generation efficiency, it contributes to increased electricity output. 【Features】 ■ Achieves a conversion efficiency of 18.1% with a narrow module ■ Significantly suppresses the occurrence rate of hotspots ■ Cost reduction *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

  • Solar System Solar Module

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Yess Architecture Super Rapid Series for Heavy Snow Areas

Yess Architecture Super Rapid Series for Heavy Snow Areas

For factories and warehouses! We have standardized an ideal structure and specifications that withstand snowfall, achieving speed and cost-effectiveness.

The "Super Rapid Series for Heavy Snow Areas" is a low-cost system construction that allows for the speedy construction of factories and warehouses. It standardizes an ideal structure and specifications that can withstand snowfall, achieving both speed and affordability. The system configuration allows for the selection of buildings according to your needs and purposes. All systems are processed entirely by computer from design to component fabrication, enabling us to provide reliable buildings with high finishing accuracy quickly. 【Features】 ■ MD900 for Heavy Snow Areas - A type that can be laid out with building widths and lengths (intermediate girder rows) at 900mm pitch - Exterior walls finished with [V Rib Wall] ■ MD600 for Heavy Snow Areas - A type that can be laid out with building widths and lengths (intermediate girder rows) at 600mm pitch - Exterior walls finished with high insulation performance [Flat Vande 35V] *For more details, please refer to the PDF materials or feel free to contact us.

  • Specialized Construction
  • Systems Architecture
  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Troubles that can occur at power plants during the winter season and how to address them.

Troubles that can occur at power plants during the winter season and how to address them.

The enemy of solar power generation in winter is snow! Prompt action can prevent the expansion of troubles and increase in losses.

We would like to introduce seasonal solar power generation troubles. There are two main types of solar power generation troubles caused by snowfall: one is that snow accumulates and blocks sunlight, leading to a decrease in power generation, and the other is that if too much snow accumulates, the panels or mounting structures may not be able to withstand the weight and could be damaged. The first measure against snow is proper installation, and it is best to clear snow when there are consecutive snowy days or the possibility of heavy snowfall. Our company not only provides installation services for solar power plants but also offers consistent maintenance services afterward, as well as comprehensive O&M services for maintenance and management. 【Examples of Solar Power Generation Troubles】 ■ Decrease in power generation ■ Accumulated snow may slide off and affect the lower areas ■ Panels may crack under excessive weight ■ Mounting structures may collapse under the strain ■ There is a possibility of secondary disasters affecting adjacent land *For more details, please refer to the related links or feel free to contact us.

  • Solar power generation equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Product Catalog "FabricSystem"

Product Catalog "FabricSystem"

Visual Communication Rufus gently connects people and information, making society better and richer!

"FabricSystem" is a catalog introducing a self-standing display type. Design changes do not require craftsmen and can be done quickly and easily with a simple insertion method, reducing operational costs. It can be used in various scenes and needs such as events, exhibitions, advertising, and pop displays. Pursuing lightweight with polyester fabric and applying a special coating enhances the color vibrancy of the ink and the clarity of the LED, resulting in high-quality graphics in this new LED stand sign. 【Features】 ■ Innovative technology ■ Eco-friendly with reliability and sustainability ■ Aesthetic and frameless design ■ Easy installation to increase deployment and reduce budget ■ Lightweight structure ensuring safety and security even in emergencies *For more details, please download the PDF or contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor LED stand panel with single-sided lithium iron phosphate battery: A1

Outdoor LED stand panel with single-sided lithium iron phosphate battery: A1

Longer lifespan than existing battery-powered LED panels! Continuous lighting time of over 20 hours! Surface illuminance of over 5000 lux!

■POINT 1■ High brightness compared to other products with a surface illuminance of over 5000 lux! Make a strong impression! If it feels too bright, it can be dimmed. ■POINT 2■ With a large-capacity battery, it can continuously light up for about 20 hours at maximum brightness! It will not turn off during business hours! ■POINT 3■ Equipped with an ultra-long-life battery!! Compared to lead batteries, it has about 4 times the charging cycle life, and about 8 times compared to lithium polymer batteries. Our previous products, https://www.plata.co.jp/user/html2/l/lb070.html which use lithium polymer batteries, reach their cycle life in about a year, with battery capacity dropping to about 70%. However, this product can be used for over 10 years even with daily charging. ■POINT 4■ A fast-charging charger is included!! It can be fully charged in about 3 hours. You can rest assured even in case of forgetting to charge.

  • Company：プラタ
  • Price：100,000 yen-500,000 yen
  • Signs, banners, lanterns, and curtains
  • Other lighting fixtures
  • Sign construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to panel

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.