hardware×山菱工業 - List of Manufacturers, Suppliers, Companies and Products

hardware Product List

1～12 item / All 12 items

Displayed results
Hold-down hardware "LD-85Y"

Hold-down hardware "LD-85Y"

No need for a lower hole, improving workability! Can be used for fastening in areas that require high strength.

The "LD-85Y" is a hold-down hardware that can be installed directly onto the vertical frame using drill screws. It can be used for connections in areas that require high strength, which cannot be accommodated by standard hold-down hardware. Strength tests have been conducted by House Plus Inspection Co., Ltd. to confirm its load-bearing capacity. The "LD-85Y" has a short-term allowable load of 86.2 kN. 【Features】 ■ Can be installed directly onto the vertical frame with drill screws ■ No pre-drilling required, improving workability ■ Usable for connections in areas requiring high strength ■ Strength tests conducted by House Plus Inspection Co., Ltd. to confirm load-bearing capacity *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Corner hardware 'MDC-15N'

Corner hardware 'MDC-15N'

Conduct strength tests to confirm durability! Since it can be constructed using only screws, it speeds up the work on site.

The "MDC-15N" is a corner hardware suitable for joining horizontal members and vertical frames. It can be installed using only screws without the need for bolts, which speeds up the work on site. By placing the hardware on the inside of the wall material, there is no worry about driving screws between the joists, and strength tests have been conducted by House Plus Inspection Co., Ltd. to confirm its load-bearing capacity. 【Features】 - Installation can be done using only screws without bolts, which speeds up the work on site. - By placing the hardware on the inside of the wall material, there is no concern about driving screws between the joists. - Strength tests have been conducted by House Plus Inspection Co., Ltd. to confirm its load-bearing capacity. *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Corner hardware for wall use 'MDC-GW'

Corner hardware for wall use 'MDC-GW'

Can be used when it is not possible to drive the screw directly from above! Corner hardware for shear walls with a short-term allowable load of 6.69 kN.

The "MDC-GW" is a corner bracket for gable walls that can be used with single studs. Strength tests were conducted by House Plus Inspection Co., Ltd. to confirm its load-bearing capacity. It can also be used in cases where screws cannot be driven directly from above or where the gable wall cannot be joined with band brackets. 【Features】 ■ Suitable for joining horizontal members and gable wall frames ■ Can be used when screws cannot be driven directly from above or when the gable wall cannot be joined with band brackets ■ Usable with single studs ■ Strength tests conducted by House Plus Inspection Co., Ltd. to confirm load-bearing capacity *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Corner hardware 'MDC-10N'

Corner hardware 'MDC-10N'

Short-term allowable load is 13.85 kN! Conducted strength tests and confirmed a load capacity equivalent to C mark HD-B10 or higher.

The "MDC-10N" is a corner hardware suitable for joining horizontal members and vertical frames. Strength tests were conducted by House Plus Inspection Co., Ltd., confirming a load-bearing capacity equivalent to C-mark HD-B10 or higher. By placing the hardware on the inside of the wall material, there is no concern about driving screws between the joists. 【Features】 ■ Ideal for joining horizontal members and vertical frames ■ By placing the hardware on the inside of the wall material, there is no concern about driving screws between the joists ■ Strength tests conducted by House Plus Inspection Co., Ltd. confirmed a load-bearing capacity equivalent to C-mark HD-B10 or higher *For more details, please refer to the PDF materials or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Product Catalog for Framed Wall Construction Connection Hardware

Product Catalog for Framed Wall Construction Connection Hardware

This is an original product developed with improvements using independently mastered metal processing technology!

This catalog features connection hardware for framed wall construction manufactured by Yamabishi Kogyo Co., Ltd., which specializes in housing and architectural hardware. It includes a variety of products such as I-JOIST support hardware, joist support hardware, corner hardware, and many others. Please feel free to contact us for load test data. [Contents] ■ I-JOIST support hardware ■ Joist support hardware ■ Corner hardware ■ Beam support hardware ■ Gutter truss support hardware, etc. *For more details, please download the PDF or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Beam support hardware "BHV3-208・210"

Beam support hardware "BHV3-208・210"

Equivalent to endurance BH3-210 or higher! Reduces labor during construction without shoulder straps and makes horizontal driving easy!

"BHV3-208・210" is a product used for supporting beams (3-208・3-210) with hardware. The connection to the beam is ZN65, making it easy to drive horizontally when the beam pitch is narrow. It does not have a shoulder, allowing for labor-saving in construction. Furthermore, strength tests have been conducted by House Plus Inspection Co., Ltd., confirming a load capacity equivalent to or greater than C-mark BH3-210. 【Features】 ■ No shoulder, enabling labor-saving in construction ■ Easy horizontal driving when the beam pitch is narrow ■ Load capacity equivalent to or greater than C-mark BH3-210 *For more details, please refer to the PDF materials or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hold-down hardware "LD-190Y"

Hold-down hardware "LD-190Y"

Can be installed with drill screws on the frame! No pre-drilling required, improving workability!

The "LD-190Y" is a hold-down hardware that can be used for the connection of the base and vertical frames, as well as for the connection of vertical frames between floors. It can be installed on vertical frames using drill screws. No pilot holes are required, which improves workability. Additionally, strength tests have been conducted by House Plus Inspection Co., Ltd., confirming its load-bearing capacity. The short-term allowable load capacity is 194.1 kN, making it suitable for connections in areas that require high load-bearing capacity. 【Features】 ■ Can be installed on vertical frames using drill screws ■ No pilot holes required, improving workability ■ Suitable for connections in areas that require high load-bearing capacity *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hold-down hardware "LD-25Y"

Hold-down hardware "LD-25Y"

Short-term allowable load 26.8 kN! The hole for the hold-down bolt is elongated to accommodate misalignment.

The "LD-25Y" is a hold-down hardware that can be used for fastening the foundation and vertical frames, as well as for fastening vertical frames between floors. It can be installed directly onto the vertical frame with drill screws, improving workability without the need for pilot holes. The holes for the hold-down bolts are elongated to accommodate misalignment. Additionally, strength tests have been conducted at the Hyogo Prefectural Agricultural, Forestry and Fisheries Technology Comprehensive Center, confirming a load capacity equivalent to or greater than C-mark HD-N25, HD-B25, and S-HD25. 【Features】 ■ Can be installed directly onto the vertical frame with drill screws ■ Improved workability without the need for pilot holes ■ Elongated holes for hold-down bolts accommodate misalignment ■ Confirmed load capacity equivalent to or greater than C-mark HD-N25, HD-B25, and S-HD25 *For more details, please refer to the PDF materials or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Belt hardware "SS (Short Strap)"

Belt hardware "SS (Short Strap)"

Compatible with the batten-less construction method! Prevents interference between hardware and rodent-proof materials, ensuring nail pitch in areas with dense nail holes!

The "SS (Short Strap)" is a band hardware that can be used for joining the foundation and the vertical frame, compatible with the no-joist construction method. By aligning the hardware with the top edge of the foundation, it prevents interference between the hardware and the rodent-proof material, and the densely packed nail holes ensure nail spacing by spreading the steel plate. Strength tests have been conducted by the Better Living Foundation, confirming a load capacity equivalent to C Mark S-65 or higher. 【Features】 ■ Prevents interference between the hardware and rodent-proof material ■ Ensures nail spacing by spreading the steel plate in densely packed nail holes ■ Compatible with no-joist construction method ■ Confirmed load capacity equivalent to C Mark S-65 or higher *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Single stud specification corner hardware 'MDC-5S'

Single stud specification corner hardware 'MDC-5S'

Ideal for joining horizontal beams and vertical frames! By placing the hardware on the inside of the wall material, screws can be driven into the joist core.

The "MDC-5S" is a corner hardware that can be used when it is not possible to join upper and lower floors with band hardware. Strength tests were conducted by House Plus Inspection Co., Ltd. to confirm its load-bearing capacity. By placing the hardware on the inside of the wall material, screws can be driven into the joist center, allowing it to be used with single studs. 【Features】 ■ Easy installation by placing the hardware on the inside of the wall material to drive screws ■ Screws can be driven into the center of the floor joist ■ No worry about driving screws between joists ■ Can be used when it is not possible to join upper and lower floors with band hardware ■ Strength tests conducted by House Plus Inspection Co., Ltd. to confirm load-bearing capacity *For more details, please refer to the PDF materials or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Corner hardware "MDC-25N (210)"

Corner hardware "MDC-25N (210)"

The short-term allowable load is 25.5 kN! Corner hardware that can be used for the connection between horizontal members and vertical frames.

The "MDC-25N (210)" is a corner hardware that has undergone strength testing by House Plus Inspection Co., Ltd. and has confirmed its load-bearing capacity. It is suitable for the connection of horizontal members and vertical frames. Since it can be installed using only screws without the need for bolts, it speeds up the work on site. 【Features】 ■ Usable for the connection of horizontal members and vertical frames ■ Can be installed using only screws without the need for bolts, speeding up work on site ■ Strength testing conducted by House Plus Inspection Co., Ltd. has confirmed its load-bearing capacity *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hold-down hardware "LD-85 (120) Y"

Hold-down hardware "LD-85 (120) Y"

No need for a bottom hole, improving workability! Can be used for fastening in areas that require high strength.

The "LD-85 (120) Y" is a hold-down hardware that can be directly installed with drill screws onto the vertical frame. It can be used for connections in areas that require high strength, which cannot be addressed by standard hold-down hardware. Strength tests have been conducted by House Plus Inspection Co., Ltd. to confirm its load-bearing capacity. The short-term allowable load is 129.6 kN / 94.6 kN. 【Features】 ■ Can be directly installed with drill screws onto the vertical frame ■ No pre-drilling required, improving workability ■ Usable for connections in areas that require high strength ■ Strength tests conducted by House Plus Inspection Co., Ltd. to confirm load-bearing capacity *For more details, please refer to the PDF document or feel free to contact us.

  • Other flooring materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to hardware

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.