hardware Product List and Ranking from 192 Manufacturers, Suppliers and Companies

Base metal fittings MCK

Basic packing specifications! Introducing column base hardware that can be used for joining column bases.

The "Column Base Hardware MCK" is a type of column base hardware used for the connection of column bases, designed with a foundation packing specification. We offer a lineup including "MCK-105CN" with dimensions of 105×300×355mm, as well as "MCK-120CN," "MCK-105ST," and "MCK-120ST" with dimensions of 120×307.5×370mm. 【Features】 ■ Used for the connection of column bases ■ Foundation packing specification ■ Material - Base part (4.5mm thick): JIS G 3101 SS400 - Base part (3.2mm thick): JIS G 3131 SPHC - Pipe part (φ21.7): JIS G 4053 SCM415 - Washer part: JIS G 3101 SS400 ■ Surface treatment - Entire column base hardware: Cationic electrodeposition coating - Round washer: JIS H 8610 (electro-galvanized) and JIS H 8625 Ep-Fe/Zn8/CM2 C *For more details, please refer to the PDF document or feel free to contact us.

Company：高尾
Price：Other

Joints between components
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Column base metal fittings MC

A φ60 hole is drilled vertically into the foundation! Introducing the column base hardware coated with cationic electrodeposition paint.

The "Column Base Hardware MC" is used for the connection of column bases. The surface treatment is cationic electrodeposition coating. A φ60 hole is drilled vertically in the base for installation. We offer two types in our lineup: "MC-105" and "MC-120." 【Features】 ■ Used for the connection of column bases ■ Material - Pipe section (φ21.7): JIS G 4053 SCM415 - Base body (4.5mm thick): JIS G 3445 STKM 12C - Base bottom plate (9.0mm thick): JIS G 3131 SPHC - Washer (6.0mm thick): Equivalent to JIS G 3101 SS400 ■ Surface treatment: Cationic electrodeposition coating *For more details, please refer to the PDF document or feel free to contact us.

Company：高尾
Price：Other

Joints between components
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Foundation joint hardware DT

Surface treatment specifications for hot-dip galvanized zinc (Z27)! Introducing the hardware used for joint connections of the foundation.

The "Foundation Joint Fitting DT" is used for joining foundation joints. The construction procedure involves inserting the DT into the foundation joint where the leading pin (on the lower end of the foundation) has been driven in, and then driving in two fixing pins to complete the process. The size available is 2.3×136×79 (mm). 【Features】 ■ Used for joining foundation joints ■ Material: JIS G 3302 SGHC ■ Surface treatment: Hot-dip galvanized (Z27) *For more details, please refer to the PDF document or feel free to contact us.

Company：高尾
Price：Other

Joints between components
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ATS (Anchor Tie-Down System)

It prevents the overturning of shear walls against the pulling forces generated during earthquakes and strong winds!

The "ATS (Anchor Tie-Down System)" is a system designed to suppress the overturning forces that buildings experience during earthquakes and typhoons. By connecting the shear walls on each floor with rods and securing the upper part of the shear walls with plate washers, it resists the pulling forces generated during earthquakes and strong winds. It prevents the overturning of shear walls and can withstand pulling forces exceeding 300 kN. 【Features】 ■ Capable of withstanding pulling forces exceeding 300 kN ■ Absorbs gaps between nuts and washers caused by the drying shrinkage and settling of wood ■ Uses deformed full-thread steel rods with a large screw pitch for anchor bolts and rods ■ Significantly improves workability compared to standard double-thread bolts *For more details, please refer to the PDF materials or feel free to contact us.

Company：高尾
Price：Other

Joints between components
Safety and consumables
Safety Supplies
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Renovation Hagoita Set

It is possible to install without modifying the exterior wall or processing bolt holes!

The "Renovation Hagoita Set" is used for joining horizontal members and columns, as well as for connecting horizontal members to each other. When connecting existing building beams and girders, it can be installed without modifying the exterior walls or processing bolt holes. Due to the long section that receives the bolt threads, it is also sufficiently capable of pulling the horizontal members together. 【Features】 ■ Can be installed on beams perpendicular to the girders without drilling bolt holes ■ Allows for joining horizontal members without modifying the exterior walls ■ Long section that receives the bolt threads ■ Short-term standard joint strength: 11.9 kN *For more details, please refer to the PDF document or feel free to contact us.

Company：高尾
Price：Other

Joints between components
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Double brace connector "Ribero II"

Reduced interference with floor sheathing and hold-down hardware! Bracing connection hardware for wall reinforcement with 2x and 3x strength.

The "Double Brace (Libero II)" is a brace joint hardware designed for wall shear resistance of 2 times and 3 times. It standardizes the use of screws to one type for ease of use and reduces interference with floor plywood and hold-down hardware. Additionally, the symmetrical shape of the hardware allows for installation without distinction between the top, bottom, left, and right of the brace. 【Features】 ■ Standardizes the use of screws to one type ■ Significantly improves work efficiency ■ Allows installation without distinction between the top, bottom, left, and right of the brace ■ Suitable for fixing braces on floor plywood (30mm thick or less) ■ Quality performance tested under the House Plus housing warranty *For more details, please refer to the PDF document or feel free to contact us.

Company：高尾
Price：Other

Joints between components
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

1.5 times bracing connector (Libero)

Can be installed without distinction on the top, bottom, left, or right of the brace ends! Brace connection hardware for a wall multiplier of 1.5 times.

The "1.5x Bracing (Libero)" is a bracing connection hardware designed for wall strength of 1.5 times, which can reduce interference with floor plywood and hold-down hardware. Since screws that attach to the foundation are not required, installation is possible even if floor plywood is placed between the foundation and the hardware. Additionally, by fixing the bracing at a position away from the edge of the horizontal member, interference with other hardware at the joint ends can be minimized. 【Features】 ■ No screws required for attachment to the foundation ■ Installation possible even with floor plywood between the foundation and hardware ■ Can be installed without distinction in the upper, lower, left, or right ends of the bracing ■ Reduces interference with other hardware at the joint ends ■ Quality performance testing completed by a certified building material testing center *For more details, please refer to the PDF document or feel free to contact us.

Company：高尾
Price：Other

Joints between components
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Double brace connector 'Double Brace (Try)'

Can be installed in any direction: lightweight and compact brace connection hardware.

The "Double Brace (Try)" is used when joining 45mm x 90mm braces (with a wall multiplier of 2) to columns and horizontal members. It is lightweight and compact, and the standard dimensions of the hardware are symmetrical, allowing for installation in any orientation—up, down, left, or right. Additionally, in the case of a true wall, the "folded" part is cut out by 40mm, ensuring that the hardware does not become exposed. 【Features】 ■ Lightweight and compact ■ Symmetrical standard dimensions of the hardware ■ Installable in any orientation—up, down, left, or right ■ In the case of a true wall, the "folded" part is cut out by 40mm, preventing hardware exposure ■ Equivalent certified product to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

Company：高尾
Price：Other

Joints between components
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Double Bracing Connector 'Double Bracing (Multi)'

No screws needed to fasten to the horizontal framing! A brace joint hardware that can be installed even with floor plywood in place.

The "Double Brace (Multi)" does not require notching of columns or horizontal members, allowing for the connection of 45mm x 90mm braces (wall strength ratio of 2). Since screws for fastening to horizontal members are not needed, installation is possible even with floor plywood (thickness of 28mm or less). Additionally, the width of the hardware is 45mm, making it more accommodating for internal use. 【Features】 ■ No need to notch columns or horizontal members ■ No screws required for fastening to horizontal members ■ Installation is possible even with floor plywood ■ Better fit for internal use ■ Equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF document or feel free to contact us.

Company：高尾
Price：Other

Joints between components
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Diagonal brace connection hardware 'Hexa Plate SD'

The embossed processing prevents the screw heads from being visible! It is possible to directly attach materials like load-bearing panels over the hardware.

The "Hexa Plate SD" is designed to be installed on the side of horizontal members, reducing interference with hold-down hardware and similar components. With a thickness of 0.6mm (compared to the conventional brace plates which are 2.3mm), it does not require notching, allowing for direct attachment of structural sheathing and similar materials over the hardware. This product is used when joining the ends of braces that are 30mm×90mm or larger (wall strength ratio of 1.5 times), 45mm×90mm or larger (wall strength ratio of 2 times), and 90mm×90mm or larger (wall strength ratio of 3 times). 【Features】 ■ Reduces interference with hold-down hardware and similar components ■ No notching required due to the thin thickness of 0.6mm ■ Allows for direct attachment of structural sheathing and similar materials over the hardware ■ Embossed design prevents screw heads from being exposed ■ Performance certified by the Japan Housing and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

Company：高尾
Price：Other

Joints between components
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Brace connection hardware 'B-Eaglet Double'

Internal use compatible! Hardware shape that avoids interference with vertical bolts for hold-downs.

The "B Eaglet 2x" is a hardware shape that avoids interference with vertical bolts for hold-downs, whether used externally or internally. In the joist method, it can be installed even in places where bracing comes at the edge of the joist. This product is used when joining the ends of bracing (wall strength ratio of 2x) that are 45mm x 90mm or larger. 【Features】 ■ Hardware shape that avoids interference with vertical bolts for hold-downs ■ Reduces interference with hold-down hardware, etc., when used internally ■ Does not interfere with beam support hardware even at the junction with bracing ■ Can be installed even in places where bracing comes at the edge of the joist ■ Certified equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

Company：高尾
Price：Other

Joints between components
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Double Bracing for Hardware Construction Method - Floor Plywood Version

Used for floor plywood with a thickness of 30mm or less! It is a brace compatible with floor plywood for interior use.

The "Double Brace for Metal Construction Method, Floor Plywood Specification" is suitable for fixing braces on top of floor plywood (30mm thick or less). It is used when joining the ends of braces that are 45mm x 90mm or larger (with a wall multiplier of 2). The main metal body is attached to the floor plywood using four dedicated square bit screws TB-76 on the horizontal member side and four dedicated square bit screws TBA-45 on the column side. 【Features】 ■ Floor plywood specification ■ Usable for traditional construction methods ■ Surface treatment: Hot-dip galvanized steel plate (Z27) ■ Standard shear resistance per meter for brace walls: 3.78kN ■ Material: JIS G 3302 (hot-dip galvanized steel plate and steel strip) SGHC or SGCC *For more details, please refer to the PDF document or feel free to contact us.

Company：高尾
Price：Other

Support hardware/opening hardware
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Column connection hardware "Flat Plate SD"

High corrosion resistance and high tensile strength with a thickness of 0.6mm! It has strength equal to or greater than Yamagata Plate VP.

The "Flat Plate SD" has a thickness of 0.6mm (compared to the conventional corner hardware which has a thickness of 2.3mm), allowing structural plywood and similar materials to be directly attached over the hardware. The screw-in area has an embossed finish, so the screw heads do not protrude. It uses "Super Dima R," which has excellent corrosion resistance. It has a load capacity equal to or greater than that of the Z-shaped plate VP. 【Features】 ■ N value of 1.1 or less ■ High corrosion resistance and high tensile strength at 0.6mm thickness ■ Short-term allowable tensile strength of 5.9kN ■ Performance certified by the Japan Home and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

Company：高尾
Price：Other

Support hardware/opening hardware
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Column connection hardware "Flat Plate Slim Plywood Specification"

Introducing column connection hardware for plywood specifications for structural plywood with a thickness of 12mm or less!

The "Flat Plate Slim Plywood Specification" is used for the connection of columns and horizontal members. It can be installed over structural plywood with a thickness of 12mm or less. Please secure 2 dedicated corner bit screws TB-55 on the column side and 3 on the horizontal member side. This product has passed joint performance tests conducted by House Plus Inspection Co., Ltd. 【Features】 ■ Plywood specification ■ N value of 1.0 or less ■ High corrosion resistance and high tensile strength, 0.6mm thickness ■ Short-term standard joint load capacity of 5.7kN ■ Material: NSDC570, manufactured by Nippon Steel Corporation ■ Surface treatment: Alloy-coated steel sheet "Super Dyma," ZQNK18 chrome-free *For more details, please refer to the PDF document or feel free to contact us.

Company：高尾
Price：Other

Support hardware/opening hardware
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rolling door hardware

Custom sizes available to fit within the dimensions! You can make effective use of the space.

This product is a rolling door hardware that features a small door track, allowing for light and easy opening and closing. The opening and closing space of the door is less than one-third that of a conventional single-leaf door, enabling effective use of space. Additionally, the flat floor allows for easy entry and exit for wheelchair users. 【Dimension Compatibility Range】 ■ Frame Width: 600–1000mm ■ Frame Height: 1700–2100mm ■ Effective Opening Width: 495–895mm ■ Effective Opening Height: 1660–2060mm ■ Door Thickness: 33–36mm *For more details, please download the PDF or feel free to contact us. *The downloaded material will be the instruction manual.

Company：参創ハウテック
Price：Other

Hardware Doors, Handles and Locks
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Outdoor Construction Materials Catalog

A rich lineup of B-pillar spacing retaining hardware, scaffolding bolts, underground cable passing materials, and more.

This catalog provides a comprehensive introduction to the "Outdoor Construction Materials" handled by Koubun Co., Ltd. It includes various products such as the "Flexible Band (4BD・FB4)" which can be used for the installation of support wires, support wire anchors, and hanging hardware, as well as "M Seats・ABM" and "Hanging Wire Cross Hardware" for the installation of arms and boxes. Please use this for selecting products. 【Featured Products (Partial)】 ■ Stainless Band Setter・SFT ■ Plastic Band・Fastening Hardware / Plastic Band Set ■ Band Support Hardware・TYS ■ Low-Pressure Rack・RL-O ■ Flexible Arm Band・UAB, etc. *For more details, please refer to the PDF document or feel free to contact us.

Company：高文仙台営業所
Price：Other

Safety and consumables
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Provides continuous large openings and spacious areas: framed wooden structure with surrounding columns.

Advantages as an "alternative structure to steel frame construction"! Usable as a structural body for versatile architecture.

The "Enclosure Column Frame Structure" is a type of wooden frame structure made from "structural timber" and "specialized hardware." It consists of four general-purpose cedar lumber pieces secured with specialized hardware to form a robust "enclosure column" and rigid beams, creating a wooden frame that does not rely on shear walls. Continuous large openings and spacious areas enrich human activities. 【Features】 ■ Kind to people (sensory effects) → Aroma, warmth, texture ■ Insulating effect of wood itself → About 20 times more effective than steel frames ■ Excellent workability ■ Superior processability ■ Reduction in insulation construction costs / Lower material costs and foundation construction costs *For more details, please refer to the related links or feel free to contact us.

Company：ライン工業
Price：Other

Insulation work
Special Construction Method
Special wooden structures
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Assembly and construction process of the enclosing columns and enclosing column structure.

Investing in technology unique to a metal workshop! Making iron more "flexible" and wood more "durable."

We will introduce the assembly and construction process of the "Enclosure Column Frame Wooden Structure" that we handle. The enclosure column is completed by pressing a φ16 pin into the column-beam joint of the hydraulic insertion machine. The construction process involves suspending the enclosure column, then joining it at the joint section with a bracket, similar to the appearance of a steel column, and wrapping it with an L-shaped splice sheet, securing it with screws. 【Assembly Process of the Enclosure Column】 1. Four 120mm square column materials 2. Assembled with dedicated hardware 3. Bolts are tightened 4. Completed *For more details, please refer to the related links or feel free to contact us.

Company：ライン工業
Price：Other

Special Construction Method
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Encircled Column Ramen Wooden Structure / Line Industry <What Can Be Done Now from Research and Development Achievements>

Oushu Akamatsu, with a moisture content SD of hinoki from Gifu Prefecture below 20%! Young's modulus E is over 110.

We would like to introduce the results of research and development related to the "Encased Column Frame Wooden Structure" that we handle. The moisture content SD of the Oushu Red Pine and the Hinoki from Gifu Prefecture in the frame type is below 20%, and the Young's modulus E is above 110. It is possible to arrange them in "lines" and "planes." 【2-Way Frame】 ■ Size of 6.0m in width and height of 3.0m with moisture content SD below 20% and Young's modulus E above 110 ■ Arranged in "lines" ■ Arranged in "planes" ■ Arranged "freely" *For more details, please refer to the related links or feel free to contact us.

Company：ライン工業
Price：Other

Special Construction Method
Special wooden structures
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Examples of Introducing Column-Frame Wooden Structures】 Model and Office

We have created high added value that allows for buildings like steel structures using general-purpose timber!

We would like to introduce an example of the "enclosed column frame wooden structure" adopted on the second floor of the LINEindustry Prefectural Timber Utilization New Office. This structure effectively utilizes local timber (cypress and cedar) in a natural and stress-free manner, and since it does not require shear walls, it allows for three sides to be covered in glass. Additionally, as it consists of a collection of four 120mm square timber pieces, the line of sight passes through the middle of the columns, enabling the construction of robust columns without a bulky appearance. 【Case Overview】 ■ Main Structure - 2nd Floor: Wooden (enclosed column frame wooden structure) - 1st Floor: Reinforced concrete ■ Fire resistance and other requirements: Other buildings ■ Total floor area: 245.26m² ■ Main tree species used: Cypress and cedar *For more details, please refer to the PDF document or feel free to contact us.

Company：ライン工業
Price：Other

Special Construction Method
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study of Introducing Wooden Structure with Enclosed Columns: Clinic

Kind to people, warmth, mental stability, refreshing effect! Effective in rehabilitation treatment, even in space.

We would like to introduce a case study of the "encased column frame wooden structure" used at Hashima Orthopedic and Dermatology Clinic. Wood is gentle on people, providing warmth, healing, mental stability, and refreshing effects. This structure was adopted with the intention of achieving these benefits in rehabilitation treatment through the space. Initially, the plan was for a steel structure with only the interior designed in wood, but the encased column frame structure allows for a large open space that matches the rehabilitation room and results in a sustainable building. 【Case Overview】 ■ Main Structure - 2nd Floor: Steel Structure - 1st Floor: Steel Structure + Wooden Structure (Encased Column Frame Wooden Structure) ■ Fire Resistance Requirements: Fireproof Structure ■ Total Floor Area: 499.63 m² ■ Main Wood Species Used: Hinoki (Japanese Cypress) and Sugi (Japanese Cedar) *For more details, please refer to the PDF document or feel free to contact us.

Company：ライン工業
Price：Other

Special Construction Method
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-diaphragm type "KH-column joint construction method"

Contributing to significant labor savings! A column-beam joint method that achieves a clean joint.

The "KH-Column Joint Method" is a column-beam connection method that uses non-diaphragm connection hardware to smartly accommodate beam height differences. By simply welding the beam to the wall surface of the "KH-Column Joint," the connection is completed, making it easy to handle beams with height differences or beams installed at an angle, resulting in a clean connection that significantly reduces manufacturing labor. Products are available for square steel pipe columns ranging from 300mm to 600mm, capable of attaching beams with strengths of 400N/mm² and 490N/mm². 【Main Features】 ■ Acquired certification from the Better Living Foundation (CBL SS003-15) ■ In design, the height difference of beams can be freely set regardless of the position of other beam flanges ■ Significant reduction in welding volume and labor at steel fabrication factories ■ A substantial decrease in the number of ultrasonic flaw detection inspection points for columns ■ Easy to ensure dimensional accuracy of steel structures *For more details, please feel free to contact us.

Company：駒井ハルテック大阪本店
Price：Other

Steel construction
Structural Materials
Joints between components
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Product Catalog: Glass Sliding Door Hardware

Introducing a wide variety of glass door hardware, including large glass-compatible wall show windows!

This catalog features "glass sliding door hardware" handled by Surinain Shimono Co., Ltd., which engages in wholesale sales of display showcase rails, hinges, locks, shelf brackets, and other hardware used in various stores such as department stores and supermarkets, including display decorative hardware and glass accessory hardware. "We boast the largest lineup in Japan in terms of the variety of glass sliding door rails and the number of patents." We have a rich selection of glass sliding door hardware, including the large glass-compatible wall showcase "Sten 12mm Sliding Door Plan," as well as "High Slide Door" and "Panod Plan." [Contents] ■ Wall showcase ■ Large showcase ■ Medium showcase ■ Sash frame sliding door ■ All-glass case ■ Low case ■ Inclined sliding door, etc. *For more details, please download the PDF or feel free to contact us.

Company：Three-Nine Shimno Co., Ltd.
Price：Other

Glass construction
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Product Catalog] Glass Sliding Door Hardware

Introducing glass swing door hardware such as stainless steel hinges that are easy to match with slim, wide baseboards!

This catalog features "glass door hardware" handled by Surinain Shimono Co., Ltd., which wholesales display showcase rails, hinges, locks, shelf brackets, and other hardware used in various stores such as department stores and supermarkets, including display decorative hardware, glass accessory hardware, furniture hardware, and architectural hardware. We have included our glass door hardware, characterized by designs that easily match slim horizontal baseboards, such as the "Stainless 8mm, 10mm, 12mm Hakama hinge" and "Stainless 5mm, 6mm Hakama hinge." [Contents Included] ■ Stainless 8mm, 10mm, 12mm Hakama hinge ■ Stainless 5mm, 6mm Hakama hinge ■ Stainless 5mm Hakama hinge ■ Grand series ■ Blue series, etc. *For more details, please download the PDF or feel free to contact us.

Company：Three-Nine Shimno Co., Ltd.
Price：Other

Interior construction
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Product Catalog: Mirror Hardware

All products are treated with Bali processing! You can feel secure during installation and for maintenance afterwards.

This catalog features "Mirror Hardware" handled by Surinain Tainou Co., Ltd., which engages in wholesale sales of display decorative hardware, glass accessory hardware, furniture hardware, architectural hardware, and more. We offer a wide range of products, including the "5mm Single Long Channel" with a mere 3mm visibility and a spacious view, as well as "Sharp Line" and "Slim Mirror Corner." [Contents] ■ Single Long Channel ■ Mirror Corner ■ Mirror Push, Mirror Stop ■ Mirror Frame *For more details, please refer to the PDF document or feel free to contact us.

Company：Three-Nine Shimno Co., Ltd.
Price：Other

Glass construction
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Product Catalog: Partition Hardware

Introducing eco-friendly channels made from transparent materials like "polycarbonate"!

This catalog features "partition hardware" handled by Surinain Tainou Co., Ltd., which engages in wholesale sales of display decorative hardware, glass accessory hardware, furniture hardware, architectural hardware, and more. We offer a wide range of products suitable for high-end hotels and restaurants, including the "counter pole," the "glass partition channel" compatible with 8-12mm glass due to its internal dimensions of 16mm, and "twin carbo," among others. [Contents] - Glass support - Counter pole - Scallop hardware - Thick breakage stop - Partition channel, etc. *For more details, please refer to the PDF document or feel free to contact us.

Company：Three-Nine Shimno Co., Ltd.
Price：Other

Joints between components
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Speed Cut Service for Mirror Brackets

To mirror contractors with short delivery times! It is now possible to purchase at specified dimensions.

We would like to introduce our "Speed Cut Service." Our new method achieves short delivery times and low costs. Additionally, all Three Nine products undergo deburring treatment. You can be assured during installation and subsequent maintenance. Please feel free to contact us when you need our services. 【Target Products】 ■ Stainless Steel Long Channel with Holes Type 8mm ■ Stainless Steel Long Channel with Holes Type 10mm *For more details, please refer to the PDF document or feel free to contact us.

Company：Three-Nine Shimno Co., Ltd.
Price：Other

Glass construction
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mirror hardware [Stainless steel short channel 10mm] <SUS304>

Introducing our 【10mm Stainless Steel Short Channel】, compatible with 5-6mm mirrors for cutting and processing!

We would like to introduce the "Single Long Channel 10mm" made of stainless steel SUS304 that we handle. We offer sizes of 5mm, 8mm, and 13mm. The lengths are available in L=2000mm and L=3000mm for continuous mirror use. Additionally, we also have Single Long Channels in 12mm and 15mm available. Please feel free to contact us when you need them. 【Single Long Channel 10mm Hole Sizes】 ■S(5×15mm), No Hole, L(5×20mm) *For more details, please refer to the PDF document or feel free to contact us.

Company：Three-Nine Shimno Co., Ltd.
Price：Other

Glass construction
Store construction
Store design
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mirror hardware [Aluminum short channel 10mm] <Aluminum>

For 5-6mm mirrors, suitable for cutting and processing! Introducing our 【10mm Aluminum Long Channel】.

We would like to introduce the "Single Long Channel 10mm" made of aluminum that we handle. The visible width is 12mm, and we offer a lineup in Silver (C), Bronze, and DX types. Additionally, we also have the Single Long Channel 8mm (brass) and Single Long Channel 10mm (brass) available. 【Single Long Channel 10mm (Aluminum) Lineup】 ■ Silver (C) ■ Bronze ■ DX *For more details, please refer to the PDF document or feel free to contact us.

Company：Three-Nine Shimno Co., Ltd.
Price：Other

Interior construction
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mirror hardware [corner] <soft acrylic, styrene-based elastomer>

Safety measures for the dangerous corners of mirror frames! Introducing our mirror hardware-related products.

We would like to introduce "Kadokko," a mirror hardware (related product) that we handle. It is the perfect size for single-length channels with a depth of 8mm or more. The colors available are clear, white, and gray. Additionally, we also offer "Hamaguard" and "Protective Sheets for Single-Length Channels." 【Kadokko Material】 ■ Clear/Gray: Soft Acrylic ■ White: Styrene-based Elastomer *For more details, please refer to the PDF document or feel free to contact us.

Company：Three-Nine Shimno Co., Ltd.
Price：Other

Glass construction
Entrance/Exterior Doors
Office furniture
hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

hardware Product List and Ranking from 192 Manufacturers, Suppliers and Companies | IPROS

hardware Manufacturer, Suppliers and Company Rankings

hardware Product ranking