glue Product List and Ranking from 40 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.

glue Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.

  1. FCR Tokyo//others
  2. null/null
  3. null/null
  4. 4 東亞合成 Tokyo//Building materials, supplies and fixtures manufacturers 新製品開発事業部　機能性接着剤部
  5. 5 東亜道路工業 Tokyo//General contractors and subcontractors 技術部
Go to Company Ranking

glue Product ranking

Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.

  1. Pavement repair - spray-type asphalt adhesive "Ah Spray" for edges.
  2. Epoxy resin-based adhesive "Showbond #202 Series" FCR
  3. Asphalt solvent-based bridge deck paving adhesive "Civil Star" 東亜道路工業 技術部
  4. 4 Light-curing adhesive "Alonix Series" 東亞合成 新製品開発事業部　機能性接着剤部
  5. 5 Acrylic resin-based emulsion adhesive "TK-1500"

glue Product List

151～165 item / All 309 items

Displayed results
Heat-resistant adhesive | Ceramic adhesive (inorganic) Ultra Temp 516

Heat-resistant adhesive | Ceramic adhesive (inorganic) Ultra Temp 516

Based on zirconia, the heat resistance limit is the highest among ceramic adhesives at 1760°C. It is a product with excellent insulation and adhesion properties.

Alemco's "Zirconia-based" ultra-high temperature ceramic adhesive. It is a new type of inorganic ceramic adhesive based on zirconia, used for sensors and equipment that operate at high temperatures. The heat resistance limit reaches an impressive 1760°C, the highest for ceramic adhesives. It exhibits excellent electrical, mechanical, and thermal properties. Being water-soluble, it can be easily removed with warm water and soap before curing.

  • glue
  • Safety and consumables
  • Medicines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat-resistant adhesive | Ceramic adhesive (inorganic) Ceramabond 668

Heat-resistant adhesive | Ceramic adhesive (inorganic) Ceramabond 668

Based on alumina and silica. Can be processed at room temperature. Between ceramics and between ceramics and metals. Used for bonding and encapsulating small electronic components.

Manufactured by Alemco, it is based on alumina and silica. It is a one-component adhesive that demonstrates excellent effectiveness in bonding ceramics and metals (such as steel and stainless steel). Additionally, it is used for bonding and encapsulating small electrical components like resistors, ignition devices, temperature sensing probes, and halogen lamps. After application, it should be air-dried at room temperature for about one hour, followed by firing at 93°C for 2 to 4 hours. The heat resistance limit is 1,371°C.

  • glue
  • Safety and consumables
  • Medicines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat-resistant adhesive | Ceramic adhesive (inorganic) Ceramabond 618N

Heat-resistant adhesive | Ceramic adhesive (inorganic) Ceramabond 618N

It features a silica base, a small thermal expansion coefficient, and strong adhesion. It is suitable for bonding ceramics, glass, and quartz.

Aremco's products demonstrate strong adhesion to silica-based materials, including low-expansion coefficient molybdenum and tungsten metals, as well as ceramics, quartz, and glass. After application, allow to air dry at room temperature for 1 to 4 hours, then fire in stages at 93°C for 2 hours, 260°C for 2 hours, and 370°C for 2 hours to achieve complete curing. The maximum heat resistance is 1,650°C.

  • glue
  • Safety and consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat-resistant adhesive | Ceramic adhesive (inorganic) Ceramabond 835

Heat-resistant adhesive | Ceramic adhesive (inorganic) Ceramabond 835

Zirconium base, reinforced with ceramic fibers. For bonding ceramics to ceramics and ceramics to metals. An example of use is halogen lamps.

Alemco product, zirconia-based. It is a water-soluble one-component type that adheres well to ceramics, glass, and metals. Reinforced with ceramic fibers, it can be processed at room temperature. It is used for bonding ceramics to ceramics and ceramics to metals. Mainly used during the production of halogen lamps. After application, allow it to dry for about one hour, then it will cure after firing at 93°C for two hours. The heat resistance limit is 1,371°C.

  • glue
  • Safety and consumables
  • Medicines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat-resistant adhesive | Ceramic adhesive (inorganic) Ceramabond 865

Heat-resistant adhesive | Ceramic adhesive (inorganic) Ceramabond 865

Based on aluminum nitride, it has high thermal conductivity and is insulating. It is used for sensors that require thermal conductivity, as well as for bonding ceramics to metals and ceramics to ceramics.

Alemco manufactured, aluminum nitride base. For bonding ceramics and metals such as ceramics, metals, semiconductors, and sensors that require high heat resistance and high thermal conductivity. After drying at room temperature for 1 to 4 hours, it is fired in stages at 93°C for 2 hours, 177°C for 2 hours, and 260°C for 2 hours. Heat resistance limit: 1,650°C.

  • glue
  • Safety and consumables
  • Medicines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat-resistant adhesive | Ceramic adhesive (inorganic) Ceramabond 835M

Heat-resistant adhesive | Ceramic adhesive (inorganic) Ceramabond 835M

Alumina-based with very strong adhesive properties and insulating characteristics. For bonding ceramics to ceramics and ceramics to metals. An example of use is halogen lamps.

Alemco product, alumina-based. It is a water-soluble one-component type that adheres well to ceramics, glass, and metals. It is ideal for use with automatic dispensers. Mainly used during the production of halogen lamps. After application, allow to dry for about 1 to 4 hours, then cure at 93°C for 2 hours. The heat resistance limit is 1,650°C.

  • glue
  • Safety and consumables
  • Medicines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Adhesive Catalog

Adhesive Catalog

One-component, solvent-free types and hot melt adhesives! A rich lineup is available.

This catalog introduces a variety of "adhesives" handled by Toyo Gosei. Starting with the one-component, solvent-free "light-curing adhesive Alonix," which hardens quickly when exposed to light, we also feature high-performance reactive adhesive "Alon Mighty" and instant adhesive "Alon Alpha," among others. Please use this for selecting products. [Featured Products (excerpt)] ■ Light-curing adhesive "Alonix" ■ High-performance reactive adhesive "Alon Mighty" ■ Polyester-based hot melt adhesive "Alon Melt PES" ■ Instant adhesive "Alon Alpha" ■ Modified olefin-based hot melt adhesive "Alon Melt PPET" *For more details, please refer to the PDF document or feel free to contact us.

  • Entrance/Exterior Doors
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Light-curing adhesive "Alonix Series"

Light-curing adhesive "Alonix Series"

Wide range of adhesion possible for electronic components, metals, glass, plastics, etc.! Hardness, viscosity, and curing can be adjusted.

The "Aronix Series" is a light-curing adhesive that can bond across a wide wavelength range of ultraviolet and visible light. Starting with the visible light and ultraviolet curing type "LCR Series," we also offer the ultraviolet anaerobic curing type "BU Series" and the ultraviolet curing type "UV-3000 Series." Additionally, depending on the materials and the shape of the substrates, we have anaerobic types that can cure even in areas not exposed to ultraviolet light. 【Features】 ■ One-component, lightweight, and no mixing required ■ Cures quickly with light ■ Reduces working time and lowers costs ■ Wide selection and design options for curing wavelengths, anaerobic properties, and cured material characteristics *For more details, please refer to the PDF document or feel free to contact us.

  • Mural
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultraviolet Curing Adhesive "Alonix UV Series"

Ultraviolet Curing Adhesive "Alonix UV Series"

Adjustable hardness, hardness, and viscosity! Suitable for a wide range of bonding including electronic components, metals, glass, and plastics.

The "Aronix UV Series" is a one-component UV-curable resin formulation based on the acrylic-based special monomer and oligomer "Aronix M Series," developed by Toyo Gosei. It can be used in conjunction with heat curing as needed, allowing for curing from thick films to thin films. Additionally, it can produce cured materials that range from tough to flexible and elastic, enabling a wide selection and design of curing methods and properties of the cured products. Furthermore, due to its rapid curing under ultraviolet light, it facilitates the automation and acceleration of manufacturing processes, leading to significant cost reductions. 【Features】 ■ One-component formulation with excellent workability ■ Cures quickly under ultraviolet light ■ Easy automation and acceleration of manufacturing processes ■ Significant cost reductions possible ■ Wide selection and design of curing methods and properties of cured products *For more details, please refer to the PDF materials or feel free to contact us.

  • Entrance/Exterior Doors
  • Mural
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Modified olefin-based hot melt adhesive "Alon Melt PPET"

Modified olefin-based hot melt adhesive "Alon Melt PPET"

Solidification and adhesion are possible in a short time! We also offer grades with added properties such as adhesion.

The "Aromelt PPET Series" is a hot melt adhesive suitable for bonding difficult-to-adhere resins such as PP, PE, PET, and nylon, with modified olefin as the main component. It solidifies and bonds in a short time, and is available in stick and pellet types, allowing for work with simpler handguns. The pellet, block, and stick types contain 100% solid content and are environmentally friendly adhesives. 【Features】 ■ Main component is modified olefin ■ Suitable for bonding difficult-to-adhere resins such as PP, PE, PET, and nylon ■ Grades with enhanced properties such as adhesion are also available ■ Solidifies and bonds in a short time ■ Work with simpler handguns is also possible *For more details, please refer to the PDF document or feel free to contact us.

  • Mural
  • glue
  • Interior construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Modified acrylate-based adhesive Pegalock

Modified acrylate-based adhesive Pegalock

An adhesive primarily composed of acrylic monomers, referred to as "second-generation adhesive" SGA.

"Pegalock" strongly adheres to iron, SUS, aluminum, other metals, ceramics, FRP, and more. It sets in 5 to 10 minutes (at room temperature), and by simply applying two layers of the two-component system, it can achieve honeymoon curing. There are no distortions, burns, or welding marks left like with welding, and it can be easily bonded without the need for special skills. 【Features】 ● Excellent heat resistance and durability ● Capable of bonding dissimilar materials ● Can bond even with some oil present, and pre-treatment is simple For more details, please download the catalog or contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-component moisture-curing adhesive [Miracle One+]

One-component moisture-curing adhesive [Miracle One+]

The performance of wet surface adhesion is one plus for strong adhesion!

Miracle One Plus is a single-component adhesive that cures on wet surfaces, primarily composed of special polyurethane resin. Conventional wet surface adhesives are two-component epoxy types that require mixing, but Miracle One Plus can be used as a single component, providing strong adhesion not only on dry surfaces but also on wet surfaces. It is a groundbreaking product that can be used for a wide range of applications. 【Features】 ● Adhesion possible on both dry and wet surfaces ● Strong initial adhesion ● Strong adhesion to concrete ● Strong adhesion to hard PVC and other plastics ◎ For more details, please refer to the PDF document or feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Industrial adhesive, two-component universal adhesive "777"

Industrial adhesive, two-component universal adhesive "777"

A and B components make up a two-part universal adhesive!

We would like to introduce the "Two-Component Universal Adhesive 777" from Hermetic Co., Ltd. This is a two-component adhesive consisting of Component A and Component B. It does not contain volatile components such as organic solvents or low-boiling point monomers, making it a low-odor and highly safe adhesive. By mixing Components A and B, it cures quickly at room temperature and exhibits strong adhesive performance. It can be used for bonding various metal materials, rigid plastics, wood, ceramics, stone, and more. For more details, please refer to the PDF document or feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Industrial tape, super strong adhesive tape, "R7 Super Clear"

Industrial tape, super strong adhesive tape, "R7 Super Clear"

Strong adhesive that is applied like double-sided tape.

We would like to introduce "Super Strong Adhesive Tape R7 Super Clear" from Hermetic Co., Ltd. This is a double-sided tape-type (structural) adhesive with ultra-strong adhesion made from synthetic resin. It has high adhesive strength and is suitable for permanent bonding applications. Since it does not use a substrate, the color tone of R7 is highly transparent, allowing for inconspicuous bonding areas of transparent materials and various components, resulting in a clean finish. Additionally, it excels in weather resistance and heat resistance, making it suitable for various applications. 【Features】 ◯ Double-sided tape-type (structural) adhesive with ultra-strong adhesion made from synthetic resin ◯ Excellent transparency due to the absence of a substrate ◯ Bonding areas of transparent materials and various components can be inconspicuous, allowing for a clean finish ◯ Excellent weather resistance and heat resistance, enabling various applications in combination with other adhesives ◎ For more details, please refer to the PDF document or feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Environmentally friendly one-component moisture-curing elastic adhesive Miracle4

Environmentally friendly one-component moisture-curing elastic adhesive Miracle4

The first tube type of the Miracle series is now on sale!!

Two new colors have been added, making a total of three colors: ivory, gray, and black! Please use it for bonding, bonding difficult materials, waterproofing, and repairs. For more details, please contact us or download the catalog.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to glue

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.