film×日東エルマテリアル - List of Manufacturers, Suppliers, Companies and Products

film Product List

1～5 item / All 5 items

Displayed results
Fluororesin film Nitoflon No. 900 series

Fluororesin film Nitoflon No. 900 series

It is a PTFE (fluorine) resin film with excellent chemical resistance, heat resistance, electrical properties, weather resistance, and good slip characteristics.

**Features** - It has excellent chemical resistance and is hardly affected by acids such as nitric acid, sulfuric acid, hydrochloric acid, and phosphoric acid, as well as caustic alkalis and ammonia. - It possesses outstanding electrical properties, including low dielectric loss, high insulation resistance, and breakdown voltage. Both dielectric constant and dielectric loss tangent are minimal, and its volume resistivity is extremely high, remaining stable over a wide range of temperatures and frequencies, making it suitable for high-frequency insulation materials. - It has a wide continuous use range from -100°C to 260°C. It shows the lowest friction coefficient among all solids and has excellent self-lubricating properties. By combining various fillers, oil-free bearings with good wear resistance and cold flow resistance can be obtained. - It excels in non-stick and release properties, not allowing adhesive substances to adhere, and can be easily released even when in contact with adhesive materials. - It demonstrates excellent weather resistance and moisture resistance. - It has excellent flame resistance.

  • Subsidiary materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Barnacle prevention film "MarinGuard"

Barnacle prevention film "MarinGuard"

A removable film that suppresses the attachment of marine organisms such as barnacles! Non-toxic and environmentally friendly as it does not use paint! Also effective for the bottom of ships.

"Marine Glide" is a film that suppresses the attachment of barnacles and other organisms for an extended period due to its special surface. By simply applying it to equipment used underwater, it can reduce fouling caused by attached organisms. It does not contain any harmful or repellent components, making it a non-toxic and environmentally friendly anti-fouling material. ☆ Features of "Marine Glide" The anti-fouling layer on the film's surface suppresses the adhesion of proteins that organisms use to attach to the surface, preventing attachment. Since it does not contain toxic components, it does not impose a burden on the environment. Additionally, it is easy to apply to surfaces.

  • Special Construction Method
  • Port supplies
  • Work boats, research vessels, underwater work machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-sided easily adhesive fluoropolymer PTFE film "No.901UL"

One-sided easily adhesive fluoropolymer PTFE film "No.901UL"

Hoppers, guide rolls, and other sliding aids are suitable for bonding with steel plates and wood to modify surface properties!

"No.901UL" is a product that has been surface-treated to facilitate adhesion on one side of a fluororesin (PTFE) film, which excels in chemical resistance, electrical properties, and weather resistance. It can be adhered to substrates using adhesives or double-sided tape. The properties other than surface adhesion conform to the original product characteristics, exhibiting excellent heat resistance, electrical insulation, slip resistance, and chemical resistance. 【Features】 ■ A wide range of thicknesses from 0.05 to 1.0 mm ■ The treated surface can be adhered using commercially available adhesives and adhesive tapes ■ Certified against UL94 flammability standards (V-0 or VTM-0, registration number E52859) *For more details, please refer to the PDF document or feel free to contact us.

  • Subsidiary materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-thin fluoropolymer reinforced film Nitoflon "No.920UL"

Ultra-thin fluoropolymer reinforced film Nitoflon "No.920UL"

Ultra-thin, heat-resistant, and excellent insulating fluoropolymer reinforced film! Non-stick with a smooth surface.

"No.920UL" is an extremely thin, non-adhesive film that does not contain filling materials. Its tensile strength is about twice that of NITOFLON cutting film, and its dielectric breakdown voltage is approximately 1.5 times higher. It is suitable for insulation coatings and spacers for electrical components, particularly for motors, transformers, and field coils, as well as for interlayer insulation and insulation in slots. 【Features】 - Tensile strength is about twice that of NITOFLON cutting film, and dielectric breakdown voltage is approximately 1.5 times higher. - Extremely thin film with a thickness of 20μm can also be produced. - Non-adhesive with a smooth surface. *For more details, please refer to the PDF document or feel free to contact us.

  • Subsidiary materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"MPS" series release film for semiconductor manufacturing process molds.

"MPS" series release film for semiconductor manufacturing process molds.

It is difficult for adhesive substances to adhere, and they can easily be released even upon contact!

The "MPS" series is a mold release fluoropolymer (PTFE) film that excels in heat resistance and release properties. It can be continuously used from -100°C to 260°C (recommended value), and can be used at even higher temperatures for short periods. There is a lineup of standard products, thermal expansion control products, and high strength/high thermal shrinkage products. 【Product Lineup】 ■MPS-10: Standard ■MPS-11: Low Thermal Expansion ■MPS-13: High Strength/High Thermal Shrinkage *For more details, please refer to the PDF document or feel free to contact us.

  • Subsidiary materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to film

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.