film×アイム - List of Manufacturers, Suppliers, Companies and Products

film Product List

16～30 item / All 33 items

Displayed results
Yield improvement in spattering and high-temperature heat treatment processes! Line contamination prevention film.

Yield improvement in spattering and high-temperature heat treatment processes! Line contamination prevention film.

[New Development] Preventing oligomer precipitation from PET film in ITO sputtering and high-temperature heat treatment processes!

The "Line Contamination Prevention Film" is effective in preventing contamination of the clean environment caused by oligomer precipitation during line stops and starts in sputtering processes and high-temperature heat treatment processes. Therefore, it contributes to improving yield by reducing cleaning work and enhancing quality. *For more details, please download the catalog or contact us.*

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-silicone type light release film (SP type)

Non-silicone type light release film (SP type)

【New Development】This type contains no silicone at all, yet achieves a light release of 250 mN/25 mm. It is also gaining attention as an alternative to fluorosilicone.

A new acrylic type has been added to the IM Release Film (R) (non-silicone type). With a silicone-free formulation achieving a release strength of 250 mN/25 mm, there are increasing opportunities to consider it as an alternative to fluorosilicone, and it has received positive feedback from many users due to its high performance and cost-effectiveness. This release film (separator) can be used for bonding with silicone adhesives and for electronic material carrier films that dislike silicone.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Development Product] Non-silicone type (SN type)

[Development Product] Non-silicone type (SN type)

[Developed Product] We have developed a new specification that contains no silicone at all and allows for controllable release strength.

A new acrylic type development specification [SN] has been added to the I'm Release Film (R) (non-silicone type). It is silicone-free and allows for the control of release strength between 700 and 5,000 mN/25mm. While it is not as lightly releasable as the previous acrylic [SP] type, heat resistance has been improved, and by varying the release differences, it can be used in two ways: light release and heavy release.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Developed Product] Non-silicone Release Film S1, S2

[Developed Product] Non-silicone Release Film S1, S2

Completely non-silicone and achieves such light release! It also suppresses repulsion, receiving high praise for acrylic tape applications, and is expanding its adoption record.

We offer a wide range of non-silicone release films, and we are pleased to introduce two new products that we have developed. The newly developed "S1" and "S2," which have been added to our lineup, are composed entirely of non-silicone materials and have achieved a light release of less than 100 mN/25 mm in the Nitto 31B tape measurement. Additionally, using light release films can often lead to issues with repelling, which may cause problems in subsequent coating processes. However, S1 and S2 successfully maintain a low contact angle despite being light release films. If you are facing challenges, particularly with resin casting applications such as epoxy, we encourage you to give them a try. We also offer wide-width options up to 2,250 mm, as well as combinations with coating mats and anti-static features. For functional coatings, please leave it to our specialized manufacturers. 【Features of S1 and S2】 ■ Achieves light release while being completely non-silicone ■ Despite being light release, maintains a low contact angle = good coating suitability ■ Minimal release variation even with high-speed peeling, making it easy to use *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Subsidiary materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Food-grade release film "RC Film"

Food-grade release film "RC Film"

Eliminate waste that adheres to the film! Introducing our food-grade release film.

"RC Film" is a food release film that prevents the adhesion of liquids and solids. It leaves no residue from foods such as whipped cream, chocolate sauce, and castella, ensuring easy release. We offer two types: "Water-Repellent and Oil-Repellent RC" and "Water-Repellent RC." 【Specifications】 <Water-Repellent and Oil-Repellent RC / Water-Repellent RC> ■ Water contact angle (°): 145/139 ■ Oleic acid contact angle (°): 115/- ■ PFAS: Applicable/Not applicable ■ Heat sealability: No/Yes ■ Food Sanitation Act: ○/○ *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Peel-off film Release Film® (Ultra Heavy Release Type)

Peel-off film Release Film® (Ultra Heavy Release Type)

[New Technology] Silicone Ultra-Heavy Release Film Ideal for Casting Applications

I'm Release Film® (Ultra Heavy Release Type) is a silicone release film (separator) that is optimal for casting, with excellent balance between coating properties and release properties.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Release film [difficult to expose to the atmosphere]

Release film [difficult to expose to the atmosphere]

At Aimu, we introduce various functional films, starting with our uniquely developed Release Film (R) (peelable film).

The adoption of UV curing technology shows almost no degradation in peeling performance due to atmospheric exposure. Additionally, by using UV curing technology to instantly cure the silicone coating film, it is possible to form a silicone coating surface with almost no defects such as uneven curing. ● For more details, please download the catalog or contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Release film [low migration silicone]

Release film [low migration silicone]

At Aimu, we introduce various functional films, starting with our uniquely developed Release Film (R) (peelable film).

By using UV curing methods, we can control the amount of ultraviolet exposure and optimize the curing state of the silicone coating. We can also propose types that improve adhesion to the substrate film. With this unique technology, it is possible to reduce the risk of contamination caused by silicone transfer. ● For more details, please download the catalog or contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Peel-off film Release Film® (Wide Clean Type)

Peel-off film Release Film® (Wide Clean Type)

The new technology wide-width clean type release film is a release film suitable for the display and electronic components related fields.

I'm Release Film® can be processed into release films with a maximum width of 2250 mm using industry-leading wide clean coaters. Additionally, through thorough clean management, we achieve a Class 100 cleanroom environment in the head section, allowing us to provide wide clean release films suitable for the optical and electronic component fields.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-low shrink film (ultra-low shrink PET) that is resistant to shrinking even at high temperatures.

Ultra-low shrink film (ultra-low shrink PET) that is resistant to shrinking even at high temperatures.

A new technology that prevents film shrinkage even at high temperatures. It can be produced with a thermal shrinkage rate equivalent to heat-resistant resin films. It is effective for touch panels and electronic component films.

PET film, are you giving up on material selection because it shrinks? The "Super Anneal Film" is an ultra-low shrink PET film realized through "ultra-low shrinkage and thermal wrinkle suppression technology." It is the ideal PET film for touch panels and precision devices such as electronic components. It helps reduce dimensional variation in PET films, improving dimensional accuracy and yield. 【Features】 ● Film production tailored to requirements by controlling thermal shrinkage ● Processing for films other than PET is also possible (consultation required) ● Prevents oligomer precipitation with coating, thus avoiding line contamination and troubles ● Minimal variation in thermal shrinkage and warping, ensuring stable quality ● Supports wide widths (up to 2250mm) ● Can be combined with various functional coatings such as release coatings and antistatic coatings *For details, please download the catalog and contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Static electricity trouble & dust adhesion prevention anti-static film

Static electricity trouble & dust adhesion prevention anti-static film

Prevent static electricity troubles during film processing! Suppress peeling charge and reduce charging during roll transport, contributing to the quality improvement of film products for electronic component applications.

Are you troubled by processing issues caused by static electricity on film? Aime's "Static Electricity Prevention Film" is a functional film that suppresses peeling static electricity and reduces static during roll transport. 【Features】 ● In addition to controlling surface resistivity of 4 to 10 log Ω/□, we offer types with improved heat resistance, solvent resistance, and alcohol resistance. ● By preventing static electricity on the film, it helps to avoid the adhesion of dust and foreign substances. ● Prevents poor peeling due to spark marks caused by static electricity. ● Can provide static prevention functions suitable for various PET films based on application and required quality. ● Can impart static prevention functions to the base layer of the release layer, preventing static issues during peeling. ● Supports wide widths (up to 2250mm). ● Can be combined with release coatings and annealing processes. *For details, please download the catalog and contact us.

  • panel
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Peel-off film Release Film® "Silicone Low Migration and Enhanced Durability"

Peel-off film Release Film® "Silicone Low Migration and Enhanced Durability"

[New Technology] Silicone low migration and improved durability release film!!

The IM Release Film® "Silicone Low Migration and Durability Enhanced Variation" is a functional release film (separator) designed to prevent peeling troubles that occur in your products and manufacturing processes, while suppressing changes in product characteristics. In addition to the basic function of release films, which is the property of "easy peeling," we offer a lineup that minimizes silicone low migration and damage to the release surface caused by heat and solvents. Furthermore, to facilitate the selection from various enhanced types, we provide a release film selection guide to assist you in your efforts to improve quality and productivity.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-silicone release film "Release Film FE Type"

Non-silicone release film "Release Film FE Type"

【Exhibition Participation】Achieving low cost and easy peeling! Excellent solvent resistance and compatible with clean environments. *Currently giving away sample sets including FB type through a lottery!

The "Release Film FE Type" is a release film developed for electronic device applications that dislike silicone, made from fluorosilicone (non-silicone type). Compared to conventional products (FB type), the release performance has been improved. You can choose from double-sided release type, static-free type, and low thermal shrinkage type. It features excellent solvent resistance and stable release performance. 【Features】 ■ Compatible with a wide width of 2,250mm ■ Coating possible in high-clean environments ■ High solvent resistance and stable release performance ■ Achieves low cost and light release *This product is a development item. Please refer to the documentation for details. ★ We will give away a sample set of fluorosilicone (FB) and non-silicone separator (SP, A, SN) for free to 20 companies selected by lottery. Please check the document "Sample Set Giveaway Information" for the contents of the set. (No download required / available for browsing) <If you wish to request a sample, please apply through the contact information below.>

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Release film [Wide range of applicable substrates]

Release film [Wide range of applicable substrates]

At Aime, we introduce various functional films, starting with our uniquely developed Release Film (R) (peelable film).

By adopting UV curing methods, we can perform release treatment not only on PET substrates but also on substrates with low heat resistance. We can also accommodate OPP release films and PE release films. Additionally, we offer industry-leading wide release films for PET, with widths of up to 2250 mm. For more details, please download the catalog or contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Peel-off film Release Film® (Double-sided variation, same release type)

Peel-off film Release Film® (Double-sided variation, same release type)

The double-sided release film with different release properties is the optimal release film for the manufacturing process of adhesive resin and adhesive products, as well as for the final products.

I'm Release Film® can also accommodate release treatment on both sides. Additionally, leveraging the characteristics of UV curing, it allows for the individual setting of release strength on the front and back surfaces, resulting in a stable quality differential release type silicone release film (separator).

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to film

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.