door - メーカー・企業306社の製品一覧とランキング | イプロス

更新日： 集計期間:Feb 25, 2026～Mar 24, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

doorのメーカー・企業ランキング

更新日： 集計期間:Feb 25, 2026～Mar 24, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. null/null
  2. 文化シヤッター Tokyo//Building materials, supplies and fixtures manufacturers
  3. ハシモト門扉 Ishikawa//Building materials, supplies and fixtures manufacturers
  4. 4 阿部興業 Tokyo//Building materials, supplies and fixtures manufacturers
  5. 5 ソーゴ 東京支店 Tokyo//Other construction industries
企業ランキングへ

doorの製品ランキング

更新日： 集計期間:Feb 25, 2026～Mar 24, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. External blinds "passiv blind" OK-DEPOT
  2. Cultural Shutter "Over Sliding Door Series" 文化シヤッター
  3. Steel Lightweight Door for Buildings (Indoor Use) 'LSD'
  4. 4 Mansion Door "Elmano Select"
  5. 5 Automatic Door "S-million" Catalog

doorの製品一覧

781～810 件を表示 ／ 全 1272 件

表示件数
FIT GATE construction example: shutter gate + general gate (private residence)

FIT GATE construction example: shutter gate + general gate (private residence)

Change the roof to a slab roof, install the supplied downlights inside the factory, and manufacture as one unit.

We would like to introduce a case where we manufactured and delivered a FIT GATE as a shutter gate for a private residence in a certain location in Osaka Prefecture. Due to the deep design, the roof was made as a slab roof, and the supplied downlights were installed in the factory, creating a single unit. After the installation of the structure, the contractor completed the wall painting and other finishes, and it was completed. A gate was installed behind the wall, serving as an entrance. [Case Overview] - The roof was made as a slab roof due to the deep design. - Supplied downlights were installed in the factory, creating a single unit. - Approximately W6,050mm × H2,925mm, installation time was about 3 hours. *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: shutter gate + general gate + fence

FIT GATE construction example: shutter gate + general gate + fence

After installation, measure the exact dimensions to ensure it can be securely enclosed from the general door to the residential baseboard, and then proceed with manufacturing!

We would like to introduce a case where a shutter gate and a side gate were manufactured and delivered by FIT GATE as part of the renovation work around the entrance of a private residence in a certain location in Gifu Prefecture. Due to the height of the shutter gate, it was manufactured with a segmented structure, and as an option, rain gutters were installed on the back of the roof of both the shutter gate and the side gate to facilitate rainwater management. The eaves of the side gate are covered with wood-like siding, creating a design that connects with the residence. [Case Overview] ■ Shutter Gate: Approximately W3,900 × H3,125 mm ■ Side Gate: Approximately W2,850 × H2,640 mm ■ FIT HIGH-WALL: Approximately W3,820 (outer diagonal) × H2,350 mm *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: shutter gate + general entrance + privacy wall

FIT GATE construction example: shutter gate + general entrance + privacy wall

It is possible to install a privacy wall without the need for a retaining wall and without narrowing the parking space!

We would like to introduce a case where two shutter gates, a service door, and a privacy wall were integrated into a single gate. Although it is a large structure, all parts were delivered to the site on the same day, and the assembly work was carried out. The height is 3,100mm, which is taller than the shutter gate, but because it is constructed with a steel frame, there is no need for supporting walls, allowing the privacy wall to be installed without narrowing the parking space. 【Case Overview】 ■ Total Length: Approximately W15,415 × H3,100mm ■ Shutter Gate: Approximately W15,235 × H2,925mm (Effective Opening: W5,660 × H2,385mm) ■ Privacy Wall (FIT HIGH-WALL): Approximately W7,300 × H3,100 × D130mm ■ Installation Time: 5.5 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: shutter gate + general gate 4

FIT GATE construction example: shutter gate + general gate 4

Designed for rainwater treatment through drains in a sloped roof! Introducing construction examples.

We have manufactured and delivered a large gate that integrates a shutter gate and a service entrance. Dimensions are approximately W13,000 × H2,925 mm, with an installation time of about 4 hours. Embedded products such as delivery boxes were installed in the factory using supplied materials, and due to the size of the large gate, it was manufactured in sections and assembled on-site. 【Case Overview】 ■ Dimensions: approximately W13,000 × H2,925 mm ■ Installation time: approximately 4 hours ■ Embedded products such as delivery boxes were installed in the factory using supplied materials ■ The height of the service entrance is set lower when viewed from the back ■ Designed to allow rainwater treatment through drains with a slab roof ■ Finished as a cohesive gate that fits the width of the site *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: shutter gate + privacy wall 1

FIT GATE construction example: shutter gate + privacy wall 1

The integrated gate with aligned heights features a design that takes into account both flow and functionality!

We manufactured and delivered a gate that integrates a shutter gate and a privacy wall at a private residence in a certain location in Tokyo. The dimensions are approximately W8,250×H2,925mm, and the installation time was about 4 hours. Due to the large structure, the shutter gate and wall were manufactured separately and connected on-site. 【Project Overview】 ■ Dimensions: approximately W8,250×H2,925mm, installation time about 4 hours ■ Adopted a built-in type that conceals the shutter case from the property side ■ Finished as a simple and user-friendly gate *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: shutter gate + privacy wall 2

FIT GATE construction example: shutter gate + privacy wall 2

Even with tall walls, it is possible to make effective use of space! Here are some construction examples.

We manufactured and delivered a gate that integrates a shutter gate with a tall wall at a private residence in Aichi Prefecture. The shutter gate and wall were divided into two parts for manufacturing and connected on-site. After the installation of the structure, finishing work was carried out by the contractor, completing the gate. The presence of the wall not only provides privacy for the entrance but also enhances the luxurious feel unique to large gates. 【Case Overview】 ■ Approximately W9,650 × H2,925 mm ■ Installation time was about 4 hours ■ Luxurious feel unique to large gates ■ Finished with a functional and stylish gate area ■ Even with a tall wall, space can be effectively utilized *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: shutter gate + privacy wall 3

FIT GATE construction example: shutter gate + privacy wall 3

The wall extending to the back connects to the wing wall constructed with concrete blocks, creating a cohesive entrance area!

We would like to introduce a case where a gate that integrates a shutter gate and a privacy wall was manufactured and delivered. Due to the large size of the gate, the shutter gate and privacy wall were manufactured separately and connected on-site. After the installation of the structure, finishing work was carried out by the contractor. Ivory-colored tiles that matched the residence were applied, resulting in an elegantly finished gate. 【Case Overview】 ■ Approximately W8,140×H2,925mm (roof dimensions) ■ Installation time: About 5 hours ■ Finished with an elegant impression ■ A cohesive gate area *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE Construction Case: Shutter Gate 5

FIT GATE Construction Case: Shutter Gate 5

Introduction of a case where the roof of the shutter gate was made slightly larger at 150mm.

We would like to introduce a case where a shutter gate for two units was manufactured and delivered as a single unit FIT GATE. The dimensions are approximately W6,300 × H2,925 mm, and the installation time was about 3 hours. Normally, to allow for the carport roof to fit, the shutter gate's roof extends about 100 mm at the back, but this time we made it slightly larger at 150 mm. After the installation of the structure, finishing work such as tiling was carried out by the construction company. 【Case Overview】 ■ Dimensions: Approximately W6,300 × H2,925 mm ■ Installation Time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE Construction Example: Shutter Gate 7

FIT GATE Construction Example: Shutter Gate 7

Introduction of a construction case where columns and beams were manufactured separately and connected on-site.

We would like to introduce a case where a shutter gate, with a part of the beam extended to serve as a roof for the approach, was manufactured and delivered by FIT GATE. Since the effective opening height of the shutter is H2500mm, the columns and beams were manufactured in sections and connected on-site. The extended beam, serving as the roof, was designed to include optional rain gutters for rainwater management. After the installation of the structure, the contractor applied the finishing touches, combining it with a stylish functional gate post, resulting in a functional and fashionable gate. 【Case Overview】 ■ Dimensions: Approximately W8,685 × H3,225mm (total length) ■ Installation Time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE Construction Case: Shutter Gate 10

FIT GATE Construction Case: Shutter Gate 10

Introduction of a case where columns and beams were manufactured separately for a large gate and assembled on-site.

We would like to introduce a case where a shutter gate for two vehicles was manufactured and delivered by FIT GATE. Due to the large size of the gate, the columns and beams were manufactured in separate parts, and assembly work was carried out on-site. After the structure was installed, the contractor applied wall finishes and other work, completing the gate. Since privacy screens will be installed on both sides of the gate, we adjusted the design to accommodate the overhang of the steel frame base. 【Case Overview】 ■ Dimensions: Approximately W7,050 × H2,925 × D1,230 mm ■ Installation Time: Approximately 3.5 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE Construction Example: Shutter Gate 11

FIT GATE Construction Example: Shutter Gate 11

The protruding roof in front has been fitted with downlights supplied during manufacturing.

We would like to introduce a case where a shutter gate designed with variations in the eaves and column heights was manufactured and delivered by FIT GATE. Due to its height and depth, it was manufactured in sections and connected on-site. The downlights provided were installed during manufacturing on the protruding roof. After the installation of the structure, finishing work was carried out by the contractor, completing the area around the gate. 【Case Overview】 ■ Dimensions: Approximately W6,480 × H3,125 mm (Effective opening W5,760 × H2,300) ■ Installation time: Approximately 3.5 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE Construction Case: Shutter Gate 12

FIT GATE Construction Case: Shutter Gate 12

We will introduce a case where each building was manufactured as a single unit and connection work was carried out on-site.

We would like to introduce a case where a shutter gate with varying depth was manufactured and delivered by FIT GATE. Each unit was manufactured as a single unit and connected on-site. The front and back faces of each structure were aligned, creating a difference in depth. After the installation of the structure, finishing work was carried out by the contractor. Although it is a simple gate, the variation in depth creates a spacious entrance and parking area. 【Case Overview】 ■ Dimensions: Approximately W8,700 × H2,925 mm ■ Installation Time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE Construction Example: Shutter Gate 13

FIT GATE Construction Example: Shutter Gate 13

The pipe shutter is installed and shipped within the factory. Installation work will be carried out after arrival at the site.

Here is an example of a shutter gate manufactured and delivered as a single unit. The pipe shutter was installed in the factory and then shipped. It was brought in using a 4-ton crane truck, and installation work was carried out after arriving at the site. After the frame was installed, the finishing work was done by the contractor, and a gray paint was applied to match the residence, resulting in a cool-looking gate. 【Case Overview】 ■ Dimensions: Approximately W6,090 × H2,925 mm ■ Installation Time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: Shutter Gate 14

FIT GATE construction example: Shutter Gate 14

Introduction of a case where the body setup was divided into two days, with approximately 3 to 4 hours of setup each day.

This is an example of a shutter gate installed in a condominium, manufactured and delivered by FIT GATE. The installation of the framework was completed over two days, taking about 3 to 4 hours each day. After the framework installation, finishing work was carried out by the contractor, resulting in both buildings having a simple gate with a soft impression. [Case Overview] ■ Right Side [Shutter Gate + Passage Gate] - Approximately W7,370 × H3,075mm (at the highest point) - Effective opening of the shutter: Approximately W5,500 × H2,300mm ■ Left Side [Shutter Gate] - Approximately W5,790 × H3,075mm - Effective opening of the shutter: W5,200 × H2,300mm *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE Construction Example: Shutter Gate 16

FIT GATE Construction Example: Shutter Gate 16

Introduction of a case where delivery was made directly to the site with one unit and installation was completed in a short time of about 2 hours.

We manufactured and delivered a FIT GATE to a private residence in a certain location in Tokyo. We installed the shutter in our factory and delivered a semi-finished structure with the base prepared as a single unit directly to the site, completing the installation in about 2 hours. After the structure was installed, the contractor carried out the finishing work, and the gate was completed. 【Case Overview】 ■ Dimensions: Approximately W5,850 × H2,925 mm (Effective opening of the shutter W5,260 × H2,300 mm) ■ Installation time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: Sukiya gate, gabled type 1 + shutter gate

FIT GATE construction example: Sukiya gate, gabled type 1 + shutter gate

Introduction of a case where the wooden frame type 1 and shutter gate were installed together in approximately 4 hours.

We would like to introduce a case where a Sukiya gate, Type Yorigata 1, and a shutter gate were manufactured and delivered separately. Both structures were produced as one unit and delivered directly to the site on the same day. After installation, finishing work was carried out by the contractor. Since the site is visible through the lattice of the pipe shutter and sliding door, it was finished in a way that emphasizes a Japanese aesthetic without feeling oppressive. 【Case Overview】 ■ Sukiya Gate, Yorigata Type 1 (Standard Product): Approximately W2,435×H2,470×D1,335mm (Roof Dimensions) ■ Shutter Gate (Built-in Type): Approximately W3,790×H2,925mm ■ Installation Time: Approximately 4 hours for both structures combined *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: General door + shutter gate (integrated type)

FIT GATE construction example: General door + shutter gate (integrated type)

The sense of pressure unique to large gates has been reduced! An example of a luxurious closed exterior structure.

We would like to introduce a case where we manufactured and delivered a gate that integrates a general access gate and a shutter gate. In the side walls of the general access gate, some space was left open, and recessed processing was applied to reduce the sense of pressure typical of large gates. After the installation of the structure, finishing work was carried out by the construction company, with tiles applied to the wall surface, making the connection points completely unobtrusive. 【Case Overview】 ■ Dimensions: Approximately W9,500 × H2,925 mm ■ Installation Time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: General gate + shutter gate (private residence)

FIT GATE construction example: General gate + shutter gate (private residence)

By unifying the height, a sense of cohesion is enhanced, creating an elegant entrance that highlights the beauty of white and wood grain!

We would like to introduce a case where a gate and shutter gate were delivered to a private residence in Aichi Prefecture. Due to the large size of the gate, we manufactured a split structure combining FIT GATE and FIT HIGH-WALL, and performed the connection work on-site. After the structure was installed, the construction company proceeded with the installation of vertical bars, gate doors, beams, and finishing work such as wall finishing. 【Case Overview】 ■ Dimensions: Approximately W11,285 × H2,925 mm ■ Installation Time: Approximately 6 hours ■ Adjusted the position of the steel base ■ Reinforcement added to the substrate *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: General door + shutter gate (unit)

FIT GATE construction example: General door + shutter gate (unit)

Manufactured and delivered as one unit! Designed with consideration to ensure that the steel base does not interfere with gate posts and meters.

We would like to introduce a case where a gate that integrates a general-purpose door and a shutter gate was manufactured and delivered as a single unit. The design was carefully considered to ensure that the steel frame base does not interfere with the gate posts and meters. After the installation of the structure, the finishing work was carried out by the construction company, resulting in a gate that harmonizes with the residence and has a natural impression. 【Case Overview】 ■ Dimensions: Approximately W6,230 × H2,925 mm *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: General door + shutter gate 6

FIT GATE construction example: General door + shutter gate 6

Due to the large body, it is manufactured in parts! Electrical wiring for delivery boxes and lighting is installed within the factory.

We would like to introduce a case where a gate that integrates a standard door and a shutter gate was manufactured and delivered by FIT GATE. Due to the large structure, it was manufactured in segments and delivered using two 4-ton unic trucks. Downlights provided by the client were installed on the protruding part of the shutter gate beam and the standard door. Electrical wiring for delivery boxes and lighting was installed in the factory, and after the structure was set up, finishing work such as tiling was carried out by the construction company, completing the project. 【Case Overview】 ■ Dimensions: Approximately W9,300 (total length) × H2,925 mm (at the highest point) ■ Installation time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: General door + shutter gate 8

FIT GATE construction example: General door + shutter gate 8

The ceiling of the general-purpose door was installed with supplied downlights! This is a case where waterproof substrate was applied and delivered.

We would like to introduce a case where a large gate, integrating a general-purpose gate and two shutter gates, was manufactured and delivered in parts. The general-purpose gate features a slab roof. Additionally, embedded posts, delivery boxes, and piping were manufactured and installed in the factory before shipping. After the installation of the structure, finishing work such as wall finishing was carried out by the contractor, resulting in a bright and high-quality gate. 【Case Overview】 ■ Dimensions: Approximately W16,850 × H2,925 mm (shutter gate dimensions) ■ Installation time: Approximately 6 hours ■ Eaves materials were installed by the contractor after the structure was set up. *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: General door + shutter gate 9

FIT GATE construction example: General door + shutter gate 9

Designed with modifications for fire prevention areas, ensuring that the columns do not interfere with the steel frame base!

We would like to introduce a case where we manufactured and delivered a combination of a passage gate and a shutter gate at FIT GATE. Due to the limited depth from the site to the residence, we adopted an exposed type shutter case and integrated the passage gate and shutter gate to create a smart gate. After the installation of the structure, the contractor completed the wall finishing, resulting in a gate that harmonizes with the residence. 【Case Overview】 ■ Dimensions: Approximately W7,250 × H3,115 mm ■ Installation Time: Approximately 6 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: General door + shutter gate 10

FIT GATE construction example: General door + shutter gate 10

The shutter gate is manufactured as a case exposure type! The roof of the passageway section is designed with GL steel plate roofing.

We would like to introduce a case where a passage gate and shutter gate were manufactured and delivered at FIT GATE. The passage gate and shutter gate were designed to fit within the eaves height of the residence and were manufactured and delivered as a single unit. After the structure was installed, finishing work was carried out by the contractor, and tiles were applied to the wall, highlighting the bright color of the wood-grain shutter. 【Case Overview】 ■ Dimensions: Approximately W6,050 × H2,635 mm ■ Installation Time: Approximately 6 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: General door + shutter gate 17

FIT GATE construction example: General door + shutter gate 17

A case where a design was requested to change the height of the shutter gate and the service entrance, as well as the eave projection.

Here is an example of the manufacturing and delivery of a passage gate and shutter gate at FIT GATE. A groove was processed on the ceiling of the passage gate to prevent rainwater from flowing inside. After the installation of the structure, the contractor completed the finishing work. The finishing materials and colors of the passage gate and shutter gate were differentiated, resulting in a simple and stylish gate that harmonizes with the residential area. 【Case Overview】 ■ Dimensions - Shutter Gate: Approximately W6,100 × H2,925 mm (Effective opening: W5,510 × H2,300 mm) - Passage Gate: Approximately W4,100 × H2,575 mm *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE Construction Example: Tropical Style Gate

FIT GATE Construction Example: Tropical Style Gate

The roof is designed with a section cut out to allow the growing plants to emerge!

We would like to introduce a case where a gate finished in a southern country style was manufactured and delivered. The finishing paint and tile work were carried out by the contractor. The roof has been designed with a portion cut out to allow the growing plants to emerge. Please feel free to contact us when you need our services. 【Case Overview】 - The finishing paint and tile work were carried out by the contractor. - The roof has been designed with a portion cut out to allow the growing plants to emerge. *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FIT GATE construction example: Shutter gate for a residential development

FIT GATE construction example: Shutter gate for a residential development

The left side is an elegant entrance, while the right side features a sharp entrance design!

Here is a case study of three shutter gates connected in a row at a residential development in Aichi Prefecture. The gates were manufactured in sections, and the assembly work was carried out on-site. By varying the finishing work, we achieved a sense of unity while creating gates that each have a distinct impression. Additionally, although the design of the two gates side by side is the same, by introducing variations in the exterior design, the left gate has an elegant appearance, while the right gate features a sharp design. [Case Overview] ■ Dimensions: Approximately W5,800 × H2,925 mm *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Sukiya Gate Construction Example: 16. Sukiya Gate Gable Type 1 <Custom Product>

Sukiya Gate Construction Example: 16. Sukiya Gate Gable Type 1 <Custom Product>

The gate is a custom-made double door! This is an example where the gate was installed after the side walls were constructed.

We would like to introduce a case of a custom order for a "Sukiya-style gate, Type 1 with a gabled roof." The side walls were constructed first, followed by the installation of the gate. After the gate was installed, the contractor completed the finishing work. The white wood-colored Sukiya gate blends gently and warmly into the ivory-toned exterior, creating a bright entrance when combined with the greenery of the plants. 【Case Overview】 - The side walls were constructed first, followed by the installation of the gate. - White wood-colored Sukiya gate. - It creates a gentle and warm impression within the ivory-toned exterior. - The gate is installed at the top of a single step, reflecting the beauty of traditional Japanese aesthetics. - The gate door is a custom-made sliding door. *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fire shutter safety device S Guard Cross [Patent No. 3854259]

Fire shutter safety device S Guard Cross [Patent No. 3854259]

Fire shutter safety device S Guard Cross [Patent No. 3854259]

This is a hazard prevention device for fire and smoke shutters that does not use electricity. 【Features】 ○ The biggest advantage is that we have achieved a model with a safe opening height of 43 cm, which can prevent accidents even when an elementary school student wearing a backpack is caught. ○ Certified by the Minister of Land, Infrastructure, Transport and Tourism Hazard prevention mechanism (Certification number CAT-0330) Smoke blocking performance (Certification number CAS-0331) Flame blocking performance (Certification number E A-0235) ● For other functions and details, please download the catalog.

  • shutter
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Soundproof door Hold door

Soundproof door Hold door

Soundproof door Hold door

In places where loud noise occurs, such as air conditioning machinery rooms, doors with high sound insulation performance are used. 【Features】 ○ This door uses rubber with magnets instead of the AT rubber typically used in standard soundproof doors. ○ The magnetic force tightly adheres the door to the frame, eliminating the need for a groove. ○ Due to its structure that does not use interlocking or sight boards, it can be opened and closed from either side of the door. ● For other functions and details, please download the catalog.

  • Steel Door
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ready-made (pre-made) "Tana Fire F" online shop

Ready-made (pre-made) "Tana Fire F" online shop

In as little as 3 days to the necessary site. We have started the ready-made sales of glass-inserted specific fire prevention equipment "TanaFire."

:*・゜☆。.:*・゜☆。.:*・゜.:*・゜☆:*・゜☆。.:*・゜☆。 Fastest delivery in 3 days! (Depending on the delivery area) New release of ready-made Tanaphire! .:*・゜☆。.:*・゜.:*・゜☆:*・゜☆。.:*・゜☆。:*・゜☆。 In the unlikely event that on-site, "There’s a change in the section, and we need to switch to glass-enclosed fire protection equipment!" "I want to brighten the space with glass instead of regular flush doors...?" "We received a notice from the fire department!!" Even if such incidents (or rather, events) occur, don’t worry! We will handle that glass-enclosed fire protection equipment! We have started selling the glass-enclosed fire protection equipment certified by the Minister of Land, Infrastructure, Transport and Tourism, "Tanaphire," through our online shop, mainly for contractors who can perform painting and installation work in-house! The size and specifications are fixed, but the frame, door, and hardware come as a full set. The glass in the door is already installed, so it can be mounted immediately upon arrival. The painting, including rust prevention, is also completed, allowing for finishing touches on-site! Shipping is free except for some regions and remote islands. We will deliver the three packages of frame, door, and hardware to sites struggling with delivery times. For more details, please check our website or catalog!

  • Steel Door
  • door

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

doorに関連する検索キーワード

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.