Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
106～120 item / All 363 items
Make logistics easy!
Experience the wide range of proposals that only a manufacturer specializing in AGVs, transfer devices, and transport carts can offer, along with attentive services that directly address your "troubles."
Confirmation of construction status is possible! Anchors that can be easily installed with an impact driver.
The "DG Anchor" is an anchor that can be easily installed using an impact driver. No matter who performs the work, there is no difference in pull-out strength. We offer options such as "M-10" with a hole diameter of 14.5mm and a pull-out strength of over 2t, and "M-12" with a hole diameter of 18.0mm and a pull-out strength of over 3t. 【Features】 ■ No difference in pull-out strength regardless of who performs the work ■ Easy to install using an impact driver ■ Pull-out strength of M-10 [over 2t], M-12 [over 3t] ■ Expansion work at the bottom of the hole takes M-10 [10 seconds], M-12 [12 seconds] ■ Ability to check the construction conditions *For more details, please refer to the PDF document or feel free to contact us.
Sleeve-driven fail-safe anchor
- The anchor features a hole for passing wires, etc., through the tapered bolt section, which means fewer components are needed as it does not require the use of eye bolts, eye nuts, or hanging hardware. This is expected to reduce costs for safety measures, improve workability, and shorten construction periods. - Its simple structure eliminates the need to check for screw loosening during inspections after construction, which is expected to enhance the reliability and efficiency of inspections. - It is a post-installed metal anchor that uses a sleeve-driven method. With a male thread design, when tensile force is applied, the sleeve expands in response, providing a more reliable crimping effect. It has been designated as a recommended material by the Japan Seismic Ceiling Construction Cooperative.
Used in places with constant vibrations such as railways and roads! Set screw anchor with anti-loosening function.
This product is a post-installed anchor with a locking function to prevent loosening. The K-lock feature continues to provide the anti-loosening function even after repeated insertion of bolts. The anti-loosening test is conducted in accordance with NAS3350 and 3354, and the product has passed the test. 【Features】 ■ Threaded anchor with anti-loosening function ■ Safety measures ■ Vibration measures *For more details, please refer to the PDF document or feel free to contact us.
An anchor system equipped with dual safety measures of "looseness prevention measures" and "fall prevention functions."
The "Safety Anchor" is a screw-type post-installed anchor that has two functions: preventing loosening and preventing falls. It uses a K nut for loosening prevention with the included nut, preventing loosening after tightening. The sleeve-driven design allows for follow-up expansion, making it safer. Additionally, even if nut loosening occurs, the nut will be stopped by the step of the bolt body. 【Features】 ■ The sleeve-driven design allows for follow-up expansion, making it safer. ■ It uses a K nut for loosening prevention with the included nut, preventing loosening after tightening. ■ Even if nut loosening occurs, the nut will be stopped by the step of the bolt body. *For more details, please refer to the PDF document or feel free to contact us.
The installation of PVC steel plates is just 2 steps! It is also possible to install the fastening surface flat!
The "KO Hammer Anchor" allows for speedy installation of PVC steel plates simply by hammering. By driving in the core rod, installation is easy, and checking after completion is straightforward. Additionally, the fastening surface can be installed flat. 【Features】 ■ Easy installation by driving in the core rod ■ Easy verification after installation ■ Ability to install the fastening surface flat ■ Materials - Main body: Aluminum - Core rod: Steel *For more details, please refer to the PDF document or feel free to contact us.
![Drive-in anchor / Anchor pin [Confident in strength due to forged processing!]](https://image.www.ipros.com/public/product/image/a49/2000259630/IPROS5234252068737854423.jpg?w=280&h=280)
Introducing our main products such as drive anchors and raspins! We aim for same-day shipping and short delivery times, shipping nationwide from Hiroshima.
The "Product Catalog" is a catalog from Hiromoto Industrial Co., Ltd., which primarily engages in the wholesale, manufacturing, and sales of lath pins, anchor pins, slope materials, and construction hardware. It features our main products that utilize the hot forging technology developed over many years, including "driven anchors," "lath pins," and "deformed lath pins." We also accept orders for civil engineering and construction hardware. Please feel free to contact us. 【Contents】 ■ Driven Anchors ■ Lath Pins ■ Deformed Lath Pins ■ Straight Pins ■ Star Lap Reinforcement, etc. *For more details, please refer to the catalog or feel free to contact us.
Capable of handling a variety of tasks! It boasts excellent features and cost performance!
The "ED 118" is a lightweight, compact, and user-friendly cordless driver drill with a smart design. It can handle a variety of tasks thanks to its electronic stepless speed control and two-speed gear system. With a 20-stage torque adjustment feature, it allows for precise screw tightening. 【Features】 ■ Lightweight, compact, and easy to use ■ Smart design ■ Capable of handling various tasks with electronic stepless speed control and two-speed gear system ■ Allows for precise screw tightening with 20-stage torque adjustment ■ Soft rubber grip is non-slip and fits perfectly in hand *For more details, please refer to the PDF document or feel free to contact us.
Equipped with a high-efficiency EC (brushless motor)! Improved efficiency with a new high-control clutch that stops instantly.
The "GSR18V-90FC" is a professional cordless multi-driver drill that can perform various screw tightening and drilling tasks with just one unit. It features a Flexiclick system that allows for easy replacement of the tip adapter. By attaching a separately sold hammer drill adapter, it can also perform drilling tasks in concrete. Additionally, a version with just the main unit, the "GSR18V-90FCH," is also available. 【Features】 ■ Equipped with a Flexiclick system for interchangeable tip adapters ■ Capable of handling various tasks with one unit ■ Includes a kickback prevention function ■ Connectable to a smartphone for function settings (sold separately) ■ Improved efficiency with a new high-control clutch that stops instantly *For more details, please refer to the PDF document or feel free to contact us.
We will propose suitable solutions regarding poor drainage and the construction of underground drainage pipes!
"The Drainage Busters" is a professional team specializing in underground drainage, proudly representing Nihon Drain. This volunteer team visits facilities struggling with poor drainage to install underground drainage systems free of charge and to educate about the relatively unknown "underground drainage." If you have any issues related to poor drainage or the installation of underground drainage pipes, please feel free to contact us. 【Activities of the Drainage Busters】 ■ Volunteer Activities - Installation of underground drainage systems free of charge for welfare and public facilities ■ Proposals and Installation for Drainage Improvement - We accept paid proposals and installations for drainage improvement *For more details, please refer to the related links or feel free to contact us.
Integrating the manufacturing process to enhance development capabilities! A CG video of the new company building has been released.
We have released a CG video of our new company building, which has been established and relocated alongside our headquarters and factory. This new building integrates sales, design, and manufacturing processes to enhance our development capabilities. The concept of the new building is "Draped in Rain," creating an "infinite cycle of rainwater" throughout the entire site. *For more details, please refer to the related links. Feel free to contact us for more information.
Burial object probing work is possible with minimal excavation area! A small and lightweight anchor for branch lines.
The "driving type auxiliary anchor" is compact and lightweight, yet it ensures sufficient tensile strength due to the resistance plate's radius. To enable easy and clear driving operations, the area of resistance has been minimized, and the contact points with the tool have been reduced to two locations. By being compact, it allows for minimal excavation range during the installation of buried objects, enabling quick and safe construction. 【Features】 ■ Compact and lightweight ■ Easy and clear ■ Quick and safe For more details, please refer to the catalog or feel free to contact us.
Introducing the spiral reinforcement compression-type permanent anchor for preventing landslides on steep slopes and ensuring slope stability!
The "Super MC Anchor" is a groundbreaking ground anchor developed with a focus on stable anchor support mechanisms and ease of construction. By reinforcing the load-bearing body directly beneath with spiral bars and incorporating a rational design that allows for multiple load-bearing bodies to be set, it significantly improves anchor performance, construction efficiency, and cost-effectiveness. Please feel free to consult us when you need assistance. 【Features】 ■ Stable anchor support mechanism ■ Immediate response to changes in ground conditions ■ Cost reduction *For more details, please refer to the PDF materials or feel free to contact us.
Quickly check the torque tightening and bolt insertion of Big One! It demonstrates reliable strength for hanging object installation!
The "Big One R-NUT BGR Type" is a wedge-type anchor for suspended objects. It balances the workability and construction quality required on-site, further enhancing the reliability of wedge-type anchors. It exhibits stable strength as it expands in response to the load. Additionally, we offer a "Big One Dedicated Driving Rod" that significantly reduces construction time and alleviates the burden on construction workers. 【Features】 ■ One-shot confirmation of torque tightening and bolt insertion for Big One ■ Balances workability and construction quality, further enhancing the reliability of wedge-type anchors ■ Provides reliable strength for suspended object installation with a large three-sided wedge ■ Exhibits stable strength as it expands in response to the load *For more details, please refer to the PDF document or feel free to contact us.
Since the replacement height is the same, it has shortened the replacement time and significantly improved efficiency!
We would like to introduce a case where we created a "special cart for mounting jigs" that allows for rotation and height adjustment for a food factory. Before implementation, the jigs weighed about 15 kg and were located at a height of approximately 1 meter, requiring manual replacement each time, which placed a significant burden on the workers. By using the implemented product, the burden during replacement was eliminated, and tools and parts could now be moved simultaneously to the replacement location. Additionally, since the replacement height is the same, the time required for replacement has been reduced, significantly increasing efficiency. 【Case Overview】 ■ Challenges - The jigs weighed about 15 kg and were located at a height of approximately 1 meter. - Manual replacement each time placed a significant burden on the workers. ■ Results - The use of a dedicated jig cart eliminated the burden during replacement. *For more details, please download the PDF or feel free to contact us.
