Last Updated： Aggregation Period:Apr 08, 2026～May 05, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 08, 2026～May 05, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 08, 2026～May 05, 2026
This ranking is based on the number of page views on our site.
61～90 item / All 252 items
videoBRIDGE IPTV Analyzer
The VB220 is the flagship model of the VB series, capable of measuring digital video streams over IP. With high-quality specifications tailored to high-end needs, it can be utilized as an ideal tool not only for analyzing IPTV networks but also for IP transmission of cable and terrestrial digital signals.
Ideal for field measurements! Supports signal mask channel power and adjacent channel power.
We would like to introduce the "RF Spectrum Analyzer" handled by Farad Corporation. It is suitable for field measurements and can accommodate center frequency, interference detection, signal bandwidth, and more. The frequency range is 10MHz-3GHz, and the memory is 8GB. Please feel free to contact us if you have any inquiries. 【Features】 ■ Suitable for field measurements ■ Supports center frequency, interference detection, signal mask channel power, adjacent channel power, and signal bandwidth ■ Frequency range: 10MHz-3GHz ■ Memory: 8GB *For more details, please refer to the PDF document or feel free to contact us.
Increase sales with a complete replacement of plug coils!
The Ignition Analyzer TA500J simply needs to be held above the direct coil to display "peak voltage," "spark time," and "engine RPM." It clearly shows which cylinder has a problem and whether the balance is properly maintained! Not only can it be used when issues arise, but it can also check the balance between cylinders during regular inspections, allowing for preventive maintenance before serious troubles occur! Additionally, repairing only the faulty cylinder often leads to more than half of vehicles returning for re-repair. By replacing all plugs and coils, the vehicle's performance improves, sales increase, troubles decrease, and customer satisfaction rises!
Just place it on the direct coil! The balance between the cylinders is immediately clear! Check all inventory vehicles and increase sales!
◆ Just place it on the coil! Eliminates the hassle of simple and power balance tests! The probe length is 340mm, allowing access to hard-to-reach areas! ◆ You can see the variations! Identify which cylinder has issues and whether the balance is properly maintained. ◆ You can see the degree of deterioration! Can advise on full replacement! Increase sales! Reduce troubles! Improve customer satisfaction! ◆ Preventive maintenance Check all incoming vehicles to prevent troubles before they occur! ◆ Four types of measurement methods and display methods Measurement methods: displays ignition secondary voltage, ignition time, power-on time, engine speed Display methods: shows values, comparisons, waveforms, and charts ◆ Compatible with all engine types and ignition methods! 4-cycle gasoline engines, 2-cycle gasoline engines, direct ignition systems, high-tension cord systems, simultaneous ignition systems! ◆ Easy-to-read display 320 × 240 pixels, L53mm × W70mm, TFT color LCD
Test and save Cat6A in just under 7 seconds! A tester compatible with future certified ISO/TIA testing standards.
The "LanTEK IV" is a cable certification analyzer that allows for quick judgment of certification results based on the color of the light in hand. It tests and saves Cat6A in just under 7 seconds. Test reports can be shared via the IDEAL AnyWARE cloud. Additionally, it can test up to 3000MHz and is compatible with future certifications of certified ISO/TIA test standards. 【Features】 ■Significant improvement in work efficiency ■Quick judgment of certification results based on the color of the light in hand ■Test reports can be shared via the IDEAL AnyWARE cloud ■Testing up to 3000MHz is possible ■Verification of optical cables is possible with the optional fiber module "FiberTech IV" *For more details, please refer to the PDF document or feel free to contact us.
![[Data] Example of EPMA Analysis 2](https://image.www.ipros.com/public/product/image/e69/2000641214/IPROS91990322899660008319.png?w=280&h=280)
Analysis by EPMA can detect using PET and PETH spectroscopic crystals, allowing for peak separation of 17Cl and 47Ag!
EPMA has superior detection resolution compared to EDX. Even in cases where the detection positions of elements are close in EDX, making peak separation difficult, it may be possible to achieve peak separation with EPMA. This document introduces the peak separation of 47Ag and 17Cl. It includes cross-sectional observations of chip resistors, X-ray spectra of 47Ag, and mapping comparisons. [Contents] - Peak separation of 47Ag and 17Cl - X-ray spectrum of 47Ag - Mapping comparison *For more details, please refer to the PDF document or feel free to contact us.
A trouble analysis device that allows for easy comprehensive monitoring of power quality.
It is a monitoring/recording device used for the power quality of factories and buildings. It is an analysis device that can identify the causes when problems occur.
High-speed asbestos-specific analyzer using near-infrared light.
The microPHAZIR AS is a portable NIR material analysis device designed for rapid screening and identification of asbestos-containing materials on-site. It is optimal as a screening device in the field. Weighing approximately 1.25 kg, this portable analysis device is battery-operated and can perform accurate analyses in just a few seconds on-site. The microPHAZIR AS utilizes near-infrared spectroscopy, making it user-friendly even for those without specialized knowledge, thus saving time and costs. 【Features】 - Safe high beam with tungsten bulb - Data communication to an external PC via USB cable from the main unit - Rechargeable lithium-ion battery allows for approximately 8 hours of continuous operation - Lightweight (approximately 1.2 kg) for one-handed operation - Comes with a dedicated carrying case For more details, please contact us.
Compatible with various frequency bands! Adopts 5G technology.
Real-time spectrum measurement, beamforming analysis, GPS-linked 5G route maps, etc. It is specialized in high-speed power measurement. *For more details, please refer to the catalog available for download below under "PDF Download." You can also request a quote from "Contact Us." Feel free to do so.
Electrical measuring instruments suitable for equipment inspection and cause identification.
This is a single unit that complies with IEC61000-4-30 (Class A) and is suitable for investigating causes during regular inspections of power sources or when malfunctions occur. The standard features also assist in data reporting and graph creation. We offer multiple types of clamps, so please choose the one you need. ★ For more details, please check the product page from the link below 【Related Links】. ★ You can also obtain the comprehensive catalog (electronic) from the "PDF Download" materials. ★ You can request a quote through "Contact Us." Please feel free to do so.
High performance for diverse gas analysis! Simple operability with the gas analysis dedicated software OPUS GA.
The "MATRIX II-MG Series" is a high-performance FT-IR gas analyzer characterized by its robustness and compact design. It is designed for gas analysis in various fields, allowing for the automatic analysis of the concentration of each component in the target gas with high precision and in real-time. We offer four models tailored to the purpose and application of the analysis. Additionally, you can choose from detectors suitable for applications, such as a cooled MCT detector that achieves maximum sensitivity and an electronic-cooled MCT detector that provides excellent sensitivity without the need for liquid nitrogen. 【Features】 ■ Selection of detectors suitable for applications ■ High spectral resolution and fast analysis ■ Quantitative function that does not require calibration ■ High-pressure measurement capability ■ Robustness *For more details, please refer to the PDF document or feel free to contact us.
Lightweight & compact, perfect for field use.
The R&S FSH handheld spectrum analyzer is designed to be rugged and user-friendly for field use. It is a lightweight measuring instrument with abundant measurement functions and excellent operability, allowing for efficient outdoor work. This product can be used as a spectrum analyzer, power meter, cable and antenna tester, or a 2-port vector network analyzer (only for FSH4/8), depending on the installed options. This provides the necessary RF analysis capabilities for service operators and maintenance departments to carry out their daily measurement tasks. 【Features】 - Installation and maintenance of transmission stations (base stations) - Measurement of electromagnetic fields - Applications in laboratories and maintenance - Easy operation - Documentation creation and remote control For more details, please contact us or download the catalog.
Introduction to a simple EMI debugging method at the PC board level using a handheld spectrum analyzer!
■Intuitive operability with a capacitive touch panel ■Large hard keys, hard keys with backlighting, and a low-reflection display enable safe operation whether wearing gloves or at any time of day ■Equipped with a battery that lasts for 8 hours ■Weighs only 2.5 kg (including battery) ■Easily expandable frequency with optional additions. No calibration required after expansion (limited to within the calibration period) 【Application Examples】 ■EMI debugging ■RF design and debugging ■Education and training ■Spectrum monitoring ■Electric field strength measurement ■Signal location ■Testing and maintenance of RF transmitters *For more details, please contact us.
Electronic measuring instrument equipped with outstanding performance and innovative features *Campaign in progress.
The "R&S FPC1000" is a spectrum analyzer that allows all frequency upgrades to be performed via a key code. Since no hardware changes are required, calibration at a service center is unnecessary, resulting in no downtime. It features a large 10.1” screen, which displays 2.6 times more information in size and 160% more pixels compared to the 8” monitors commonly used in general measuring instruments. 【Features】 ■ Average noise level: -163 dBm@ 1 GHz (Preamp ON, Typ.) ■ Phase noise: <-103 dBc/Hz (500 MHz, 100 KHz offset, Typ.) ■ Clear display of analysis results on a 10.1-inch large screen ■ Control via WLAN from a distance is possible ■ Frequency upgrades via key code are available *Currently, we are running a special promotion. For more details, please download the PDF or contact us.
Measurements as easy as ABC
The R&S ZNLE is an economy-class network analyzer equipped with a 2-port S-parameter test set as standard. This model achieves remarkable RF performance, boasting a dynamic range of 120 dB and a trace noise of 0.001 dB, reaching class-leading levels. Furthermore, it offers measurement speeds that are approximately 10 times faster compared to models in the same class.
World's highest peak spectrum signal analyzer
The high-performance R&S FSW signal and spectrum analyzer has been developed to meet the stringent requirements of our customers. This device offers ultra-low phase noise, a wide analysis bandwidth, and an intuitive and easy-to-understand operating method, allowing for quick and simple measurements. Key Features: Frequency range from 2 Hz to 8/13.6/26.5/43.5/50/67/85 GHz (up to 500 GHz when using Rohde & Schwarz external harmonic mixers) Phase noise as low as -137 dBc (1 Hz) (10 kHz offset, 1 GHz carrier) Maximum analysis bandwidth of 2 GHz
Provides performance that exceeds expectations while being low-cost. Achieves investment protection, high resolution, and easy control!
The "R&S FPC" is one of the few spectrum analyzers available on the market that offers three types of measurement instruments—"spectrum analyzer," "vector network analyzer," and "signal generator"—in one box. These three types of instruments are frequently used by RF engineers in tasks such as the development of IoT devices. Due to features such as investment protection, high resolution, and easy control, the "R&S FPC" spectrum analyzer is suitable for use in university laboratories, research institutions, and manufacturing/services. Excellent quality and innovation do not necessarily have to be expensive. The "R&S FPC" spectrum analyzer is low-priced yet delivers performance that exceeds expectations. It is designed in Germany to the same quality standards as high-end equipment. 【Features】 ■ High resolution ■ RF performance designed in Germany ■ Bandwidth settings with resolution down to 1 Hz ■ Smith chart display capability ■ Wi-Fi compatible, supported by built-in remote control software ■ 3-year standard warranty *For more details, please refer to the PDF document or feel free to contact us.
Detailed analysis of signal sources and components. Introduction of unique measuring instruments.
The "R&S FSWP" is a unique measuring instrument equipped with additional options for pulsed signal measurement, residual phase noise (including pulsed signals) characterization, and signal spectrum analysis. With its ultra-low noise built-in signal source and cross-correlation, it achieves extremely high sensitivity. It can measure the phase noise of stable signal sources used in radar applications in just a few seconds. 【Features】 ■ Simultaneous measurement of amplitude noise and phase noise ■ Phase noise measurement of pulsed signal sources with just a button press ■ Built-in signal source for measuring residual phase noise including pulsed signals ■ Integration of signal spectrum analyzer and phase noise analyzer ■ High-speed measurement *For more details, please refer to the PDF document or feel free to contact us.
Improved operability with an easy-to-understand menu structure! A versatile and highly adaptable measuring instrument.
The "R&S ZNL" is a highly versatile universal measurement instrument that condenses vector network analysis measurements, spectrum analysis measurements, and power meter measurements into a single compact unit. It offers a frequency range of 5 kHz to 3 GHz or 6 GHz, making it suitable for various RF component measurement applications in industrial electronics and wireless communications. 【Features】 ■ Excellent RF performance ■ A variety of functions for production and laboratory use, including support for calibration units ■ Improved operability with an easy-to-understand menu structure ■ User-friendly 10.1-inch large display ■ Portable for easy transport anywhere *For more details, please refer to the PDF materials or feel free to contact us.
In addition to technical processing, we also provide information about the application.
This document explains the real-time option (FSW-B160R) of the R&S FSW and the processing system of real-time processing of the R&S FSVR. In addition to technical processing, we will also introduce applications. 【Contents (excerpt)】 ■ Real-time analysis - What is real-time? - Applications of real-time analysis ■ Real-time processing system of the real-time analyzer - FFT window - FFT length and window length - FFT update rate - FFT overlap - Time resolution of FFT results - Probability of Intercept (POI) - Playback in zoom mode, etc. *For more details, please refer to the PDF document or feel free to contact us.
Providing advanced wideband test solutions that cover the millimeter wave band.
The miniaturization of antenna feed electronic products is progressing due to integrated beamforming ICs. With a multi-port network analyzer, the necessary test setup can be consolidated into a single measuring instrument. This document presents the "Verification of Beamforming ICs for Phased Array Antennas" using Rohde & Schwarz solutions. [Contents] ■ Challenges ■ Rohde & Schwarz Solutions ■ Special needs for wideband modulated signals such as 5G NR and satellite communications *For more details, please refer to the PDF document or feel free to contact us.
