Last Updated： Aggregation Period:Sep 30, 2026～Oct 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 30, 2026～Oct 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 30, 2026～Oct 27, 2026
This ranking is based on the number of page views on our site.
931～960 item / All 1819 items
Coaxial connector relay adapter SMA female - SMA female (impedance 50Ω)
● It is a relay adapter with SMA female connectors on both sides. ● This product is adjusted to an impedance of 50Ω. For more details, please refer to the related link.
Coaxial connector relay adapter SMA female - SMA female (panel mount type, impedance 50Ω)
● It is a relay adapter with SMA female connectors on both sides. ● It is a type that can be mounted on a panel. ● This product is adjusted to an impedance of 50Ω. For more details, please see the related link.
Coaxial connector branching adapter T-type splitter with three SMA female connectors (impedance 50Ω)
●This is a T-type branching adapter with three SMA female connectors. ●This product is adjusted to an impedance of 50Ω.
Coaxial connector relay adapter SMA male - SMA female (L-angle type, impedance 50Ω)
●This is an L-angle shaped relay adapter for SMA male and SMA female. ●This product is adjusted to an impedance of 50Ω. For more details, please see the related link.
Coaxial connector adapter SMA female - SMB male (impedance 50Ω)
●This is a conversion adapter from SMA female to SMB male. ●This product is adjusted to an impedance of 50Ω. 【Note】 Please be very careful about the distinction between male and female SMB connectors. The SMB connector of this product is labeled as [male], but it may differ from your understanding. The products shipped from our company will match the shape shown in the product photos above and the diagrams on our product page linked above, so please confirm thoroughly before placing an order. For more details, please refer to the related link.
Coaxial connector adapter SMA male - SMB male (impedance 50Ω)
●This is a conversion adapter from SMA male to SMB male. ●This product is adjusted to an impedance of 50Ω. 【Note】 Please be very careful about the distinction between male and female SMB connectors. The SMB connector of this product is labeled as [male], but it may differ from your understanding. The products shipped from our company will have the shape shown in the product photos above and the diagrams on our product page linked above, so please confirm carefully before placing your order.
Coaxial connector adapter SMA male - N female (impedance 50Ω)
●This is a conversion adapter for SMA male and N-type female. ●This product is adjusted to an impedance of 50Ω. For more details, please see the related link.
Coaxial connector relay adapter N-type female to N-type female (panel mount type, impedance 50Ω)
● It is a relay adapter with N-type female connectors on both sides. ● It is a type that can be mounted on a panel. ● This product is adjusted to an impedance of 50Ω. For more details, please see the related links.
Coaxial connector relay adapter N-type male - N-type male (L-angle shape, impedance 50Ω)
● It is a relay adapter with an L-angle shape featuring N-type male connectors on both sides. ● This product is adjusted to an impedance of 50Ω. For more details, please refer to the related link.
Coaxial connector conversion adapter N-type female - TNC-type female (impedance 50Ω)
●This is a relay adapter for N-type female and TNC-type female connectors. ●This product is adjusted to an impedance of 50Ω. For more details, please see the related link.
Coaxial connector conversion adapter N-type female - TNC-type male (impedance 50Ω)
●This is a relay adapter with an N-type female and a TNC-type male. ●This product is adjusted to an impedance of 50Ω. For more details, please see the related links.
Coaxial connector conversion adapter F-type male - F-type female (impedance 75Ω)
This is a conversion adapter for F-type male and F-type female connectors. ● The screw size of the F connector is 3/8 inch - 32 UNEF. ● This product is adjusted to an impedance of 75Ω. For more details, please see the related link.
Coaxial connector adapter F-type male (plug type) - F-type female (L-angle type, impedance 75Ω)
●This is a conversion adapter with an F-type male and F-type female connector. ●It has an L-angle shape. ●The screw size of the F connector is 3/8 inch - 32 UNEF. ●This product is adjusted to an impedance of 75Ω. For more details, please see the related link.
Coaxial connector adapter F-type male to F-type female (L-angle type, impedance 75Ω)
●This is a conversion adapter for F-type male and F-type female. ●It has an L-angle shape. ●The screw size of the F connector is 3/8 inch - 32 UNEF. ●This product is adjusted to an impedance of 75Ω. For more details, please see the related link.
Coaxial connector adapter F-type female to BNC male (impedance 75Ω)
●This is a conversion adapter from F-type female to BNC male. ●The screw size of the F connector is 3/8 inch - 32 UNEF. ●This product is adjusted to an impedance of 75Ω. For more details, please see the related link.
Coaxial connector conversion adapter F-type male - RCA female (impedance 75Ω)
●This is a conversion adapter for F-type male and RCA female. ●The screw size of the F connector is 3/8 inch - 32 UNEF. ●This product is adjusted to an impedance of 75Ω. For more details, please see the related link.
Conversion adapter BNC (female) ⇔ RCA (female) (impedance unadjusted)
It is a conversion adapter from BNC female to RCA female. For more details, please see the related link.
Coaxial connector adapter F-type female to RCA female (panel mount type, impedance 75Ω)
● This is a conversion adapter for F-type female and RCA female connectors. ● It is a type that can be mounted on a panel. ● The screw size of the F connector is 3/8 inch - 32 UNEF. ● This product is adjusted to an impedance of 75Ω. For more details, please see the related link.
HDMI panel mount extension adapter 【Dustproof and waterproof, IP66 compliant】 with HDMI-A female connectors on both sides, cylindrical shape, with end cap.
● This is a relay adapter with a panel mountable HDMI Type A female connector (both the front and back sides have female connectors). ● It complies with the HDMI Ver 1.4 standard (High Speed HDMI Cable with Ethernet) supporting 4K×2K. ● It comes with a screw-mounted cap for dust and water protection. ● The recommended maximum thickness of the panel to be mounted is 4mm, and the recommended minimum mounting pitch is 32mm (please note that this dimension does not take into account the size of the tools used for tightening large nuts). For more details, please refer to the related link.
LAN (CAT6) panel mount relay adapter [Dustproof and waterproof, IP67 compliant] Shielded (STP) type cylindrical with end cap included.
● This is a relay adapter with a panel-mountable RJ-45 female connector (both the front and back sides have female connectors). ● It is a relay connector with a dustproof and waterproof structure compliant with IP67. ● The recommended maximum thickness of the panel to be mounted is 4mm, and the recommended minimum mounting pitch is 40mm (please note that this dimension does not take into account the size of the tools used for tightening large nuts). For more details, please refer to the related links.
Snap-in relay connector, 10Gbps communication compatible, PoE++ compatible, RJ-45 female, tool-free straight wiring type.
● This is a snap-in type metal shielded relay adapter for extending LAN cables up to Category 6A. ● Cable wiring is possible without a crimping tool. ● This relay adapter supports communication for Category 6A (transmission frequency bandwidth 500MHz/10GBASE-T) compatible with 10G BASE (10Gbps). ● It is compatible with IEEE802.3bt (PoE++), a standard that enhances network power supply, making it suitable for high power consumption devices such as specialized equipment and video conferencing. ● The cable exit direction on the back side is in a horizontal straight direction. ● It can be installed using a guide chip on outlet plates from other manufacturers. For more details, please refer to the related links.
Snap-in connector, dual RJ-45 female cylindrical type, with dust cover (for LAN wiring, CAT6 compatible)
● This is a snap-in type relay adapter for extending LAN cables up to Category 6. ● The front cable insertion port is equipped with a dust cover, which can be closed when not in use to prevent dust and other foreign particles from entering. ● It is an adapter with RJ-45 female connectors on both sides, allowing a LAN cable with an RJ-45 connector to be directly connected to the back side. ● It can be installed using a guide chip on outlet plates from other manufacturers. For more details, please refer to the related links.
Set of 4 BNC 4mm banana adapters, 2 BNC terminal block adapters, and 50-ohm BNC feed-through terminators.
.
![[Cost Reduction Case] Adapter with a Two-Board Configuration](https://image.www.ipros.com/public/product/image/451/2000413907/IPROS17938368499721811885.jpg?w=280&h=280)
When replacing the adapter, cost reduction is possible by only replacing the board with the implemented socket!
The socket part of the conversion adapter is a consumable item, and as the number of uses increases, deterioration may occur due to dirt on the terminal contact surfaces and solder transfer, leading to writing failures. The conversion adapter needs to be equipped with a dedicated circuit depending on the writing specifications of the device. To reduce costs associated with adapter replacement due to socket deterioration, the adapter has been designed with a two-board structure, where the base board contains the dedicated circuit, and the replacement board only implements the socket. With this conversion adapter, when replacing the adapter due to socket deterioration, it is sufficient to replace only the board with the implemented socket, allowing for a reduction in running costs. 【Features and Objectives】 ■ Cost Reduction ■ Custom Support *For more details, please refer to the external link page or feel free to contact us. *You can download the company profile materials from the link below.
AC adapter that allows simultaneous charging of up to 4 radios using the separately sold rapid charging station KSC-25LCR.
The "KSC-25LML" is an AC adapter manufactured by JVC Kenwood. It is a connected charging station that can charge JVC Kenwood's digital simple radio licensed stations and digital simple radio registered stations. Using the separately sold rapid charging station KSC-25LCR, you can charge up to 4 radios simultaneously. It can be powered from a household AC 100V power source. *Note: The separately sold rapid charging station KSC-25LCR is required for use. 【Compatible Models】 General business radios - TCP-D143 - TCP-D243 - TCP-D343 【Features】 ■ Can charge up to 4 units simultaneously ■ Can be powered from a household AC 100V power source For extremely low prices on earphone microphones and batteries, leave it to Excelli. *For more details, please feel free to contact us.
The separately sold charging stations KSC-49LCR and KSC-51LCR can charge up to 6 units simultaneously, while the KSC-45LCR can charge up to 4 units simultaneously with the AC adapter.
The "KSC-45LSL" is an AC adapter manufactured by JVC Kenwood. It is an AC adapter that can charge general business radios, digital simple radio licensed stations, and digital simple radio registered stations made by JVC Kenwood. With this product, you can connect and charge up to 6 units using the charging docks KSC-49LCR and KSC-51LCR, and up to 4 units using KSC-45LCR. *Please ensure that the charging dock and the rechargeable battery or radio unit are used in the correct combinations. Charging will not be possible with incompatible combinations, so please be careful. [Compatible Models] General Business Radios - TCP-D143 - TCP-D243 - TCP-D343 - TCP-D751FT Digital Simple Radio Registered Stations Digital Simple Radio Licensed Stations - TCP-D751 Digital Simple Radio Licensed Stations - TCP-D251C - TCP-D151C Digital Simple Radio Registered Stations - TCP-D551 - TPZ-D553 [Features] ■ Can charge up to 6 units simultaneously For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact our company.
AC adapter for charging that can be powered from a household outlet AC100V when combined with separately sold DC cables or USB charging cables.
The "EDC-300" is a charging AC adapter manufactured by Alinco. You can charge the following radios and accessories using the methods below: 【DJ-PHM10】 - By combining with the separately sold DC cable UA0105, you can connect the cable directly to the radio body and charge for about 3 hours. - By connecting the cable to the separately sold single/dual charging stand EDC-299R, you can charge for about 3 hours. 【DJ-PV1D】 - By combining with the separately sold USB charging cable EDS-32 and connecting it to the radio body, you can charge in about 4.5 hours. - When combined with the separately sold dual charging stand EDC-307, it can be charged in about 5.5 hours. 【EMS-87B, EMS-87W, EMS-87BNC, DLS-01】 - By combining with the separately sold DC cable UA0105 and connecting it to the dual charging stand EDC-308R, it can be charged in about 3 hours. 【EME-80WMA, EME-80BMA】 - By combining with the separately sold dual charging set EDC-295R and the charging cable EDS-37 included with EME-80WMA and EME-80BMA, it can be charged in about 2 hours. It can be powered from a household AC 100V power supply.
AC adapter for the charger that can be powered from a household outlet AC100V, when combined with the separately sold charger body FC-D301BC.
The "FC-D301AC" is an AC adapter for the charger manufactured by F.R.C. It is the standard AC adapter for the digital simple radio registration station FC-D301. When combined with the standard charger body FC-D301BC of the FC-D301, it charges the lithium-ion battery pack FC-D301BT from a household power supply of AC100V. The charging time for the FC-D301BT is approximately 3.5 hours. *The FC-D301AC alone cannot charge the battery. There is also a vehicle charging DC cable FC-D301DC that charges from the vehicle's cigarette lighter socket. 【Compatible Models】 Digital Simple Radio Registration Station - FC-D301 【Other Features】 ■ Can be powered from a household AC100V power supply ■ Charging time is approximately 3.5 hours
AC adapter for connecting that can charge up to 6 separately sold Yaesu (Standard Horizon) charging docks.
The "SAD-52A" is an AC adapter for the Yaesu Musen (Standard Horizon) series of multi-unit chargers. ● It can be used in combination with the Yaesu Musen (Standard Horizon) multi-unit chargers SBH-20, SBH-21, SBH-26, SBH-29, SBH-30, and SBH-33. ● With one SAD-52A, you can charge up to 6 SBH-20 units, up to 5 SBH-21 and SBH-26 units, and up to 3 SBH-29 and SBH-33 units, all from a single outlet. ● It is powered by a household AC100V power supply. * It cannot be used with the Standard multi-unit chargers CD-51 and CD-54. 【Features】 ■ Can charge up to 6 units simultaneously ■ Can be powered from a household AC100V power supply For extremely low prices on earphone microphones and batteries, trust Excely. * For more details, please feel free to contact us.
AC adapter for connecting that can charge up to 6 separately sold Yaesu (Standard Horizon) charging bases.
●EDC-702 (EDC702) is a coupling charging AC adapter manufactured by Alinco. ●It is designed for household power supply AC100V. ●It can charge up to 5 devices, such as the charging stand EDC-700 (sold separately) for the portable digital fire and emergency radio receiver DJ-XF7. ●Additionally, by combining the EDC-702 with the separately sold conversion cable EDS-21, it can be used with the vehicle-mounted digital fire emergency radio receivers DR-XF7 and DR-XF5 as a base station powered by AC100V. ●Furthermore, by using the separately sold power cable EDS-42 to connect to the external power adapter EDH-43, it can supply power to portable digital simple radios from AC100V. ●The cable length is approximately 1.2m (total length of the power cable is 3.2m). ●It complies with PSE standards. ●It is equipped with overvoltage and temperature rise protection. ●This product is intended for municipalities that oversee fire and emergency services. Individual purchases by fire and emergency personnel are not allowed. For more details, please consult your relevant authority. For unbeatable prices on earphone microphones and batteries, trust Excelli. *For more information, please feel free to contact us.
