Work vehicle Product List and Ranking from 43 Manufacturers, Suppliers and Companies

Telehandler "MRT1440easy/MRT2540P"

Just change the attachment! A telehandler that performs multiple tasks on site with just one machine.

The 『MRT1440easy/MRT2540P』 is still a rare machine in Japan, but it is a standard machine found on construction sites in America and Europe. It can lift without extending outriggers, allowing for lifting in areas where there is no overhead clearance. The basic specification fork comes with side shift for precise positioning, and by changing the attachment at the tip, it can perform various tasks on construction sites with just one machine. It can transport soil and sand with a bucket, perform installation work on the upper parts of buildings with a platform, and lift using a winch-equipped extension jib, offering limitless possibilities for use. With its compact body, it can access narrow sites and perform lifting inside buildings where large lifting machines cannot go. 【Features】 ■ Capable of handling various tasks by changing attachments ■ The same operation for diverse tasks ■ Maintenance for just one machine ■ Capable of performing small crane operations ■ Deep fork operations with side shift-equipped forks *For more details, please refer to the PDF document or feel free to contact us.

Company：ケーティーマシナリー東京本社
Price：Other

Crane and others
forklift
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Telehandler "ULM415H"

A multifunctional construction machine capable of handling various tasks by exchanging attachments.

The "ULM415H" is a major machine commonly found on construction sites in America and Europe, with one unit typically present at each site. By changing the advanced attachments, this machine can be utilized for multiple roles. It can transport earth and sand with a bucket, perform work on the upper parts of buildings with a platform, and lift loads with a winch-equipped extension jib, among other uses, thanks to its versatile attachments. Its compact body makes it ideal for work in narrow spaces. 【Features】 ■ A multifunctional construction machine ■ Basic operations remain the same despite the variety of tasks ■ Compatible with a wide range of attachments for various jobs ■ Easy attachment changes ■ Excellent climbing ability, capable of operating on rough terrain *For more details, please refer to the PDF document or feel free to contact us.

Company：ケーティーマシナリー東京本社
Price：Other

forklift
Crane and others
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Telehandler with anti-tipping function" *Manufactured by MANITOU, France

[NETIS Registration] Attachments can be exchanged with one touch. Many adoption records by wind turbine manufacturers. Exhibited at Smart Energy WEEK.

The "Telehandler with Anti-Tipping Function" is a multifunctional construction machine from the EU that is widely used in wind power construction projects. It allows for one-touch attachment changes, covering a wide variety of tasks such as forklift operations, high-altitude work, and crane operations, significantly improving work efficiency. It is already standard equipment at construction sites overseas and has been accumulating a track record in Japan as well. 【Reasons to Choose the "Telehandler"】 ■ Registered with NETIS ■ One-touch attachment changes are possible ■ Covers forklift operations, high-altitude work, crane operations, etc., with one machine ■ Over 50 types of attachments available ■ Commonly used at wind power sites overseas *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Company：ケーティーマシナリー東京本社
Price：Other

Hoist/Crane
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multi-purpose working vehicle 'Citymaster 1600'

This is a German-made multi-purpose work vehicle from Hako with a cabin (all-weather type)!

The "Citymaster 1600" is a multipurpose work vehicle that can be driven with a regular driver's license, demonstrating excellent economic efficiency and contributing to cost reduction. With operational performance recognized worldwide, it comes equipped with a wide range of attachments that can be easily swapped by one person for various tasks such as street cleaning, snow removal, and lawn mowing, among many other applications. There are also demonstration records across the country. 【Features】 ■ Outstanding cleaning capability ■ High mobility and ease of operation ■ Comfort inside the cabin and excellent visibility ■ Versatility with a wide variety of attachments *For more details, please download the PDF or feel free to contact us.

Company：飛鳥特装
Price：Other

Sweeping vehicles, grass cutting vehicles, road surface regeneration machines, snow removal machines
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multipurpose Work Vehicle 'Multicar M31'

Introducing a work vehicle that combines driver comfort and safety with multifunctionality and mobility!

The "Multicar M31" is a multipurpose work vehicle that allows for the attachment of over 300 different types of attachments, enabling various tasks to be performed throughout the year. It features a 2,998cc FPT turbo diesel engine and complies with Euro VI environmental standards. It is expected to excel in diverse scenarios such as road maintenance, railway management, and airport facility management. 【Features】 ■ Over 300 diverse attachments ■ All-terrain vehicle ■ User-friendly operation for daily tasks ■ Increased space, better visibility, and enhanced safety ■ Economically efficient operation *For more details, please refer to the PDF materials or feel free to contact us.

Company：飛鳥特装
Price：Other

Sweeping vehicles, grass cutting vehicles, road surface regeneration machines, snow removal machines
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aerial Work Platform (Vehicle Type) Product Catalog

Wide working radius and outstanding mobility! Introducing a variety of lineups, starting with the 12m Sky Master!

This catalog features the "Aerial Work Platforms (Vehicle Type)" handled by Kaneko Corporation. The "Bridge Checker" enables mobile operations by adopting moving outriggers. Since the outriggers are equipped with tires, it allows for movement while working. Additionally, the "Multi-Stage 12m" allows for boom rotation and extension from a low position, making it suitable for continuous work inside tunnels. Please use this information for selecting products. [Contents] ■ 10m Electric Sky Master ■ 12m Sky Master ■ 15.5m and 16m Sky Master ■ 18.5m and 22m Sky Master ■ 25m Sky Master *For more details, please refer to the PDF materials or feel free to contact us.

Company：カネコ・コーポレーション
Price：Other

Construction machinery leasing and rental
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aerial work platform (others)

We have a super ladder, as well as aluminum folding work tables and maximum steps available!

We would like to introduce the "Mobile Lifting Work Platform" that our company handles. The "Mobile Lifting Work Platform" can be easily operated by anyone, without the need for any qualifications or training courses. It allows two people to remain on the platform while ascending or descending to the specified height. In addition, we offer a lineup suitable for labor-saving and efficiency improvements, including the "Upstar," "Work Platform with Handrails," "Standing Platform," and "Standing Horse." Please feel free to contact us when you need assistance. 【Features of the Mobile Lifting Work Platform】 ■ No qualifications or training courses required for operation ■ Easy to operate for anyone ■ Can be transported by elevator ■ Easy to transport and move ■ Allows two people to remain on the platform while ascending or descending to the specified height *For more details, please refer to the PDF materials or feel free to contact us.

Company：カネコ・コーポレーション
Price：Other

Scaffolding and Support Materials
Other elevators and transport systems
Lifting and transport system
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-altitude work vehicle UX "Kento" <6m>

The KenTun series now includes a 6m option! The work platform can be slid to expand.

Introducing the high-altitude work vehicle UX 'Kento' handled by Rent-a-Nikken Co., Ltd. It is capable of traveling while the work platform is elevated (up to 6.1m), and the work platform can be extended by 460mm using a sliding mechanism. Additionally, it features functions to detect front and rear height differences, front and rear obstacles, and overhead obstacles when the work platform is raised. 【Features】 ■ Front and rear height difference detection function: Detects height differences (up and down) of approximately 25mm or more ■ Front and rear obstacle detection function: Detects about 15mm of deformation in the collision damper ■ Overhead obstacle detection function: Detects contact from limit switches (4 locations) ■ Upper laser pointer ■ UX function display board *For more details, please download the PDF or feel free to contact us.

Company：レンタルのニッケン東京本社
Price：Other

lift
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Next-generation aerial work platform UX "Ken Tun 4.5m"

Revolution in high-altitude work at construction sites: "Movement is possible when the work platform is elevated."

Product Use: A high-altitude work vehicle for indoor tasks such as construction work, equipment installation, electrical work, interior work, painting work, and plumbing work. Product Features: This next-generation high-altitude work vehicle is equipped with various detection functions, allowing it to operate with the work platform raised (up to 4.5m). Detection Functions: - Front and rear height difference detection function - detects height differences of approximately 25mm or more - Front and rear obstacle detection function - detects approximately 15mm deformation of the collision damper - Upper obstacle detection function - detects contact with limit switches (4 locations) ⇒ operation stops / alarm sounds Precautions: The use of a helmet and safety harness is mandatory during operation. Please prepare accordingly. The UX function serves as a safety assistance feature. Please confirm the operating instructions and ensure that qualified personnel perform the work. License and Qualification Information: - Special Education Information: Special education for high-altitude work vehicles Inspection and Testing Information: - Regular Self-Inspection: Specific Self-Inspection

Company：レンタルのニッケン東京本社
Price：Other

Construction machinery leasing and rental
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[For Event Setup] Ken Tun 4.5m

The work platform can move while elevated! Improved flexibility for event setup.

On-site event setup requires flexible responses, such as changes to the venue layout and installation of decorations. This is especially important in venues with high ceilings or in tight spaces, where the mobility of aerial work platforms becomes crucial. Traditional aerial work platforms require the work platform to be retracted every time they move, which can reduce work efficiency. The Ken-Tun 4.5m allows for movement with the work platform raised, significantly improving work efficiency in event setups. 【Usage Scenarios】 * Setting up exhibition booths * Installing lighting at event venues * Interior construction * Installing signs 【Benefits of Implementation】 * Reduced work time * Improved work efficiency * Enhanced flexibility

Company：レンタルのニッケン東京本社
Price：Other

Construction machinery leasing and rental
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Can operate in an elevated state! The high-altitude work vehicle 'Kentoons' improves mobility efficiency.

Supports a maximum rise of 4.5m. With three types of high-performance detection functions, it reduces the risk of collisions and falls during indoor high-altitude work, optimizing safety management.

Introducing the high-altitude work vehicle UX "Kento" handled by Rent-a-Nikken Co., Ltd. This product is a high-altitude work vehicle that can operate even with the work platform raised (up to 4.5m). It is equipped with an "UX Function Display Board" that allows users to visually check various operational statuses and detection functions via LED indicators. Additionally, it features a safety support function that detects steps and obstacles when the work platform is raised, contributing to safety measures during high-altitude work and improving mobility efficiency. 【For those with the following concerns】 ■ Want to reduce the burden of moving and getting on and off during high-altitude work ■ Want to improve work efficiency while considering safety measures ■ Want to smoothly operate a high-altitude work vehicle in narrow spaces ■ Want to reduce the risk of contact with steps and obstacles ■ Want to strengthen measures against near-miss incidents during high-altitude work *For more details, please download the PDF or feel free to contact us.

Company：レンタルのニッケン東京本社
Price：Other

lift
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Improving Work Efficiency in Fireproof Coating Construction: "Kento'n x TO Gather"

While rising with the construction, let's carry out 'fireproof coating work'! Let's collect 'scrap materials and waste' with TO Gather!

■Kento: X45UX Product Use: This is a high-altitude work vehicle for indoor tasks such as construction work, equipment installation, electrical work, interior work, painting, and plumbing. Product Features: It is a high-altitude work vehicle equipped with various detection functions, allowing it to operate with the work platform raised (up to 4.5m). Detection Functions: - Rear step detection function - detects steps of approximately 25mm or more - Front and rear obstacle detection function - detects a variation of about 15mm in the collision damper - Upper obstacle detection function - detects contact with limit switches (4 locations) ⇒ stops operation/alarm sounds - License and qualification information - Special education information: Special education for high-altitude work vehicles - Regular self-inspection: Specific self-inspection ■TO Gather: TOG 'TO Gather®' is an autonomous cleaning robot that automatically collects debris that has fallen on the floor of construction sites, contributing to labor-saving cleaning operations. It recognizes four installed reflective markers with laser sensors and automatically generates cleaning areas and routes. It can collect debris in an area of 100m² within 30 minutes. 【Main Equipment】 ■ Laser Sensor ■ Control Panel ■ 7-inch Monitor ■ Warning Light ■ Battery Level ■ Controller ■ Safety Devices - Emergency Stop Switch - Collision Prevention Sensor

Company：レンタルのニッケン東京本社
Price：Other

Measurement and analysis equipment leasing and rental
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Track Bed Maintenance and Compaction Work Vehicle "KSP2002 E-LP"

One-man operation is possible! With the "vibration force adjustment device," vibration transmission to nearby areas is minimized, and stabilizer work is also possible.

The "KSP" is equipped with a side plow, center plow, stabilizer unit, and main sweeper. It can be completed in a single run by just one operator, contributing to work efficiency. Additionally, it features an "adjustable vibration force mechanism," allowing for stabilizer work that minimizes vibration propagation to neighboring areas. <Features> ■ Maximum speed: 70-80 km/h ■ Total length: ~16,000 mm ■ High-performance SCS track bed stabilizer system with adjustable vibration force mechanism ■ One-man operation possible *For more details, please download the PDF or feel free to contact us.

Company：日本プラッサー本社
Price：Other

Geological Survey
Paving of sidewalks, roads, parking lots and stadiums
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Rental] Aerial Work Platform "Boom Type"

We offer a rich lineup! Leave the rental of aerial work platforms to us.

We would like to introduce our company's boom-type aerial work platforms. We offer a wide range of models, from the "HX64B-2" with a maximum working height of 6,380mm to the "HX180B-2" with a maximum height of 18,000mm. In addition, we also have "truck-mounted" and "vertical lift" models available. Please feel free to contact us when you need assistance. 【Product Lineup】 ■HX64B-2 ■HX99B-2 ■HX120B-2 ■HX140B-2 ■HX180B-2 *For more details, please refer to the PDF document or feel free to contact us.

Company：Hitachi Construction Machinery Japan Co., Ltd.
Price：Other

Construction machinery leasing and rental
Crane and others
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Rental] Vertical Lift (Scissor) Type Aerial Work Platform

It is ideal for high-altitude work such as equipment and interior construction and maintenance tasks using a no-scaffolding method.

We would like to introduce the vertical lift (scissor) type aerial work platforms handled by Hitachi Construction Machinery Japan, Ltd. With a rich lineup, they are ideal for high-altitude work such as equipment and interior construction using no scaffolding methods, as well as maintenance tasks. 【Partial Lineup】 ■ Hokuetsu Kogyo "ENTL061S-3" 6.1m ■ Hokuetsu Kogyo "ENTL080S-3" 8.0m

Company：Hitachi Construction Machinery Japan Co., Ltd.
Price：Other

Construction machinery leasing and rental
Work vehicle

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Crawler-type all-electric scissors lift 0407ET

Fully electric and excellent in mobility, a crawler-type vertical lift aerial work platform.

■Hydraulic oil-free and environmentally friendly 　●No operating oil used, fundamentally avoiding oil leaks at the work site. 　●Low noise and environmentally friendly due to zero emissions. ■Easy maintenance 　●AC drive motor has a high protection rating, ensuring maintenance and optimal TCO. 　●The pull-out battery tray and fully open chassis provide easy access to components, simplifying maintenance and reducing work time. ■High productivity 　●Non-marking rubber tracks ensure traction and surface protection on all terrains. 　●Zero turning radius allows for efficient operation in tight spaces. 　●Industry-leading 230kg platform capacity accommodates larger workloads.

Company：同心機械
Price：Other

others
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Crawler-type all-electric scissor lift 0610ET

Fully electric and excellent in mobility, crawler-type vertical lift work platform.

■Hydraulic oil-free and environmentally friendly 　●No operating oil used, fundamentally avoiding oil leaks at the work site 　●Low noise and environmentally friendly due to zero emissions ■Easy maintenance 　●AC drive motor equipped with high protection rating ensures maintenance and optimal TCO 　●Pull-out battery tray and fully open chassis make access to components easy, simplifying maintenance and reducing work time. ■Easy to move and transport 　●Central lifting point and side forklift pockets enable quick and safe handling ■High productivity 　●Non-marking rubber tracks ensure traction and surface protection on all terrains 　●Zero turning radius allows for efficient operation in tight spaces 　●Industry-leading 250kg platform capacity accommodates larger workloads

Company：同心機械
Price：Other

others
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0608ME ALL Electric Scissor Lift

Fully electric, highly mobile wheeled vertical aerial work platform.

■Oil-free, Environmental Protection ● No hydraulic oil used, fundamentally avoiding oil leaks at the work site ● Low noise and environmentally friendly due to zero emissions ■High Reliability ● Electric cylinders used instead of hydraulic cylinders, reducing energy consumption and enabling stable operation for longer periods ● Easy to transport with side forklift pockets ■Maintenance & Operating Cost Reduction ● Standardized parts for easier maintenance and repairs, making spare parts easier to supply ● Brushless AC drive motor and maintenance-free battery are standard equipment, reducing maintenance costs

Company：同心機械
Price：Other

others
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0808E Electric Scissor Lift

Electric wheeled vertical lift work platform with excellent mobility.

■High Efficiency and Environmental Protection ● The efficiency has improved by 2 times compared to hydraulic motors due to the use of a DC electric motor drive. ● Achieved quiet operation and zero emissions. ■Reduction of Maintenance Costs ● The unique open chassis frame design has shortened daily maintenance time. ● The forklift can be inserted from both the left and right sides, making transportation of the machine easier. ● Standardization of parts has made maintenance and repairs easier, and spare parts are also more readily available. ■High Reliability ● The industry's first wide scissors design has resulted in a more stable aerial work platform. ● The collision prevention bumper has further improved scratch prevention.

Company：同心機械
Price：Other

others
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0808E ALL - Fully Electric Scissor Lift

Fully electric, highly mobile wheeled vertical lift work platform.

■Oil-free, Environmental Protection ● No hydraulic oil used, fundamentally avoiding oil leaks at the work site ● Environmentally friendly due to zero emissions ■High Reliability ● Uses electric cylinders instead of hydraulic cylinders, reducing energy consumption and enabling stable operation for longer periods ● Easy to transport with side forklift pockets ■Maintenance & Operating Cost Reduction ● Standardization of parts makes maintenance and repairs easier, and spare parts are also easier to supply ● Equipped with brushless AC drive motors and maintenance-free batteries as standard, reducing maintenance costs

Company：同心機械
Price：Other

others
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

1212E Electric Scissor Lift

Electric, highly mobile wheeled vertical lift work platform.

■High Efficiency, Environmental Protection 　●Efficiency has been improved by 2 times compared to hydraulic motors due to DC motor drive. 　●Achieved quiet operation and zero emissions. ■Reduced Maintenance Costs 　●The unique open chassis frame design has shortened daily maintenance time. 　●Forklifts can be inserted from both sides, making transportation of the machine easier. 　●Standardization of parts has made maintenance and repairs easier, and spare parts are also easier to supply. ■High Reliability 　●The industry's first wide scissors design has resulted in a more stable aerial work platform. 　●Damage prevention bumpers have further improved scratch resistance.

Company：同心機械
Price：Other

others
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

1412E Plus Electric Scissor Lift

Electric, highly mobile wheeled vertical lift work platform.

■High Efficiency, Environmental Protection ● By using a DC electric motor drive, efficiency is improved by twice compared to hydraulic motors, achieving further quiet operation and zero emissions. ■Reduction of Maintenance Costs ● Our unique open chassis frame technology has shortened daily maintenance time. ● The forklift can be inserted from both the left and right sides, making transportation of the machine easier. ● By standardizing parts, maintenance and repairs have been made easier, and spare parts are also more readily available. ■High Reliability ● The industry's first wide scissors design has achieved a more stable aerial work platform.

Company：同心機械
Price：Other

others
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AB16EJ Electric Telescopic Boom Lift

Electric, highly mobile wheeled telescopic boom lift.

■Compact Structure ● The compact design allows for work in complex passages and limited spaces. ■Excellent Performance ● With a maximum allowable working angle of 5°, it has a wide working range and high adaptability to various sites. ● A maximum load capacity of 454 kg, along with off-road and oscillating axles, makes it suitable for multiple scenarios. ■Battery-Powered ● Low cost, quiet, with no exhaust emissions, making it environmentally friendly.

Company：同心機械
Price：Other

others
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AB16EJ Plus Off-Road Electric Telescopic Boom Lift

Electric, highly mobile 4WD wheeled telescopic boom lift.

■Compact Structure ● The compact design allows for operation in complex pathways and limited spaces. ■Excellent Performance ● With a maximum allowable working angle of 5°, it offers a wider working range and better adaptability to various sites. ● A maximum load capacity of 454kg, along with off-road and oscillating axles, enables it to handle multiple scenarios. ■Battery-Powered ● Low cost, quiet, with no exhaust emissions, making it environmentally friendly.

Company：同心機械
Price：Other

others
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

LSB12E Electric Telescopic Boom Aerial Work Platform

Lightweight and electric, a wheeled boom-type aerial work platform with excellent functionality.

■ Ultra-narrow width machine with a width of 1.4m, no tail sway, suitable for operation in tight spaces. ■ Central layout with excellent structural rigidity and minimal yaw of the boom. ■ AC motor drive, providing smooth operation and excellent micro-movement capability. ■ High-precision platform load detection system to reduce shutdowns due to accidental false alarms. ■ Smooth rotation achieved with an integrated rotary reducer. ■ This machine has zero emissions, operates smoothly, and is excellent for energy saving. ■ To enhance safety, the platform has a contact alarm device, and the jib can rotate ±80° to clear obstacles.

Company：同心機械
Price：Other

others
Work vehicle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Work vehicle Product List and Ranking from 43 Manufacturers, Suppliers and Companies | IPROS

Work vehicle Manufacturer, Suppliers and Company Rankings

Work vehicle Product ranking