Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
736～750 item / All 1211 items
2 in 1! Voltage and resistance testing possible with one unit. Cost reduction for coil testing!
The insulation resistance/withstand voltage tester TH9320 is an economical and advanced safety tester. It can display small characters, is lightweight, and easy to operate! It can be widely used for safety testing of household appliances, transformers, electrical components, and more.
Ideal for high voltage coil measurement. Provides 10,000VDC impulse voltage and a high-speed sampling rate of 100MHz.
The high voltage coil impulse tester IWT-10KV provides a 10,000VDC impulse voltage and a high-speed sampling rate of 100MHz. It is designed to ensure the quality of coils, particularly in the inductance range of 50μH to 50H, such as high-output inductors, transformers, and stator coils. The IWT-10KV can easily detect issues such as insulation failures and insufficient rotation caused by winding materials, winding processes, frames, and magnetic materials by comparing the waveforms of the master sample and the DUT. 【Main Specifications】 ■ Wide inductance measurement range: 50μH-50H ■ Programmable low-energy impulse voltage from 500V to 10,000V ■ 100MHz high sampling rate ■ Simple & rapid inspection with 4 waveform comparison method ■ Best waveform analysis with ultra-low voltage measurement steps ■ Accessories: High voltage test line cable, power cord, user manual, USB interface cable, RS232C cable, CD-ROM
A next-generation analytical testing machine that adopts high-speed sampling technology to measure the insulation performance of coil products.
During the examination, the standard waveform stored in this device is compared with the current measurement waveform. It provides PASS or FAIL comparison results based on area, differential area, corona discharge, differential phase, etc. The TH2882A series, equipped with powerful features, accurate testing methods, flexible operation, and various interfaces, can provide testing solutions for most coil winding products. Coil products (such as transformers and motors) may experience insulation failures between coil layers, circles, and leads due to factors such as coil wire materials, magnetic materials, structure, and manufacturing techniques. The impulse winding tester of the TH2882A series adopts high-speed sampling technology and is a new generation of analytical testing equipment for measuring the insulation performance of coil products.
Dedicated testing device that integrates contact action recording, current waveform recording, and variable power supply.
The circuit breaker/disconnector testing device "TA-300A" is a dedicated testing device that integrates contact operation recording, current waveform recording, and a variable power supply. With this single device, you can conduct opening and closing characteristic tests of circuit breakers/disconnectors in accordance with JEC-2300 and 2310. Thanks to the touch panel display and operation command output buttons, the device is easy to operate even for first-time users, and test results can be quickly confirmed on the screen and printed out. It is a standard device that allows for safe and efficient opening and closing characteristic tests during the completion and regular inspections of circuit breakers and disconnectors. 【Features】 ○ Easy operation pursued with an outdoor-specific touch panel ○ Built-in induced voltage removal circuit ○ Measurement of pre-insertion time for resistive contacts is possible ○ Automatic confirmation of pumping prevention is possible ○ Phase loss testing is possible For more details, please contact us or download the catalog.
Maximum load 500N! Supports various tests such as tensile (compression) tests, bending tests, and peeling tests.
The "QC-528M1F" is a lightweight and compact tabletop universal testing machine with a single-column structure. The system operates on a 100V power supply and uses a stepper motor to control the head's speed with high precision. Additionally, there is no need to input settings when replacing the load cell. It is suitable for testing small samples and can accommodate various samples and tests by switching between multiple grips. 【Features】 ■ Each load cell has pre-registered and saved information. ■ The jog controller allows for precise position adjustments, which is useful for fine-tuning positions and calibrating load sensors. ■ Control via PC is possible with the M1F software. ■ The user-friendly software supports multiple languages. *For more details, please refer to the PDF document or feel free to contact us.
Stroke adjustment according to sample dimensions is possible! We have a variety of grips available.
The QC-508M2F is a compact universal testing machine with a single-column structure that does not require a large installation space. With a maximum load of 2kN achieved through the combination of a servo motor and ball screw, it is suitable for testing standard samples as well as small products. Thanks to the high-functionality M2F controller, it allows for PC control and supports a variety of tests including tensile (compression) tests, bending tests, creep tests, and repetitive tests, offering more than 260 types of analysis menus. 【Features】 ■ Maximum load: 2kN ■ Over 260 types of analysis menus ■ Precise position adjustment with jog controller ■ Optional corrosion protection for load sensors ■ Automatic recognition and calibration function for load cells *For more details, please refer to the PDF materials or feel free to contact us.
User-friendly software supports multiple languages and includes data analysis features.
The QC-508M1F is a compact universal testing machine with a single-column structure that does not require a large installation space. It allows for stroke adjustment according to sample dimensions and is equipped with various types of grips (air grips, thread grips, vice grips, etc.) to accommodate a wide range of tests. Additionally, the optional display enables standalone testing with a PC, allowing for measurement and simple data analysis. 【Features】 - Accurate position adjustment using a jog controller - Corrosion protection for optional load sensors - Automatic recognition and calibration function for load cells - Maximum load of 2kN achieved through a combination of servo motor and ball screw - Control via PC using M1F software - Supports tensile (compression) tests, bending tests, peel tests, and more *For more details, please refer to the PDF document or feel free to contact us.
A variety of grips are available! The maximum load capacity with the combination of a servo motor and ball screw is 5 kN.
The "QC-548M1F Series" is a compact universal testing machine with a single-column structure that does not require a large installation space. It allows for stroke adjustments tailored to sample dimensions and offers a variety of grips (such as air grips, thread grips, and vice grips) to accommodate various tests. The user-friendly software supports multiple languages and features real-time display of test data, reporting functions, data analysis capabilities, and archiving of saved data. 【Features】 ■ Accurate position adjustment using a jog controller ■ Optional corrosion protection for load sensors ■ Automatic recognition and calibration of load cells ■ Control via PC using M1F software ■ Supports tensile (compression) tests, bending tests, peeling tests, displacement maintenance tests, and more *For more details, please refer to the PDF materials or feel free to contact us.
Automatic recognition and calibration function of load cells! It is particularly used for the evaluation of fibers, threads, and tapes.
The "QC-548D2-M" is a tabletop universal testing machine with a maximum load of 5kN. The technology that controls the equipped DC motor like a high-precision servo motor relies on special motor control and algorithms, allowing for the correction of the rotational speed during motor drive to achieve optimal speed. It also features easy operability, allowing tests to be started simply by pressing a button with digital speed settings. 【Features】 ■ Automatic recognition and calibration function of load cells ■ Easy testing with the device alone ■ Power supply: compatible with 110-240V ■ The D2 controller and 7-inch display can control and analyze data without the need for a PC, functioning independently ■ Tests can be started simply by pressing a button with digital speed settings *For more details, please refer to the PDF materials or feel free to contact us.
Over 260 types of analysis menus! Specifications have been prepared to accommodate larger samples by varying the width of the testing machine.
The "QC-526M2F-Extended" is a versatile testing machine with a large testing space and an extended stroke, featuring a double column design. The system, with a maximum load of 20kN, uses a maintenance-free servo motor, offering high control precision and excellent quietness. Additionally, the high-performance M2F controller supports a variety of tests, including tensile (compression) tests, bending tests, creep tests, stress relaxation tests, repetitive tests, and multi-step tests that combine multiple tests. 【Features】 ■ Creep tests, repetitive tests, strain-controlled tests, foam material tests, Poisson's ratio, slip tests, etc. ■ Over 260 types of analysis menus ■ Accurate position adjustment using a jog controller ■ Optional corrosion protection for load sensors ■ Automatic recognition and calibration function for load cells *For more details, please refer to the PDF document or feel free to contact us.
Precise position adjustment with the jog controller! It excels in high control accuracy and quietness.
The "QC-526M2F" is a versatile testing machine with a large testing space and a double column design. It is a version with a shorter stroke than the "QC-526M2F-Extended," and its drive mechanism is maintenance-free, ensuring stable performance over a long period. It supports a wide range of tests, including manual tensile tests, compression tests, peel tests, adhesive strength tests, and tear tests. By connecting to a PC, you can switch the displayed language and units (SI units, US units) using dedicated software. 【Features】 ■ Over 260 types of analysis menus ■ Accurate position adjustment with a jog controller ■ Optional corrosion protection for load sensors ■ Automatic recognition and calibration function for load cells *For more details, please refer to the PDF materials or feel free to contact us.
Control via PC is possible! The M1F controller supports tensile (compression) tests, bending tests, and more.
The "QC-526M1F-Extended" is a versatile testing machine with a double column design that combines a standard testing space with a longer stroke. The maximum load, achieved through a combination of a servo motor and ball screw, is 20kN. It allows for stroke adjustments to accommodate various sample dimensions and a wide range of grips (air grips, thread grips, vice grips, etc.), making it suitable for various tests. 【Features】 ■ Precise position adjustment using a jog controller ■ Optional corrosion protection for load sensors ■ Automatic recognition and calibration function for load cells ■ Maximum load of 20kN achieved through a combination of a servo motor and ball screw ■ Compatible with tensile (compression) tests, bending tests, peeling tests, and displacement maintenance (tensile/compression) tests via the M1F controller *For more details, please refer to the PDF document or feel free to contact us.
User-friendly software supports multiple languages! Outputs more detailed analysis results in report format.
The "QC-526M1F" is a versatile testing machine with a double column design that combines a standard testing space and stroke. It has a shorter stroke than the "QC-526M1F-Extended," and the maximum load achieved through the combination of a servo motor and ball screw is 20kN. It can be controlled via a PC, and with the M1F controller, it supports tensile (compression) tests, bending tests, peeling tests, and displacement maintenance (tensile/compression) tests. 【Features】 ■ Accurate position adjustment using a jog controller ■ Optional load sensor with corrosion protection ■ Automatic recognition and calibration function for load cells ■ Stroke adjustment is possible to accommodate sample dimensions and various grips used ■ Analyzed test data is displayed in real-time ■ Testing can also be conducted independently of the system, allowing for easy acquisition of test data *For more details, please refer to the PDF document or feel free to contact us.
Control from a PC is possible with D2 Software! Supports a variety of tests such as tensile (compression) tests and bending tests.
The "QC-526D2-Extended" is a versatile testing machine with a double column design that combines a large testing space and a greater stroke. It has a maximum load capacity of 20kN, making it suitable for large test samples, and it supports functionality expansion after purchase. It can be equipped with numerous grip options using a high-precision system. Additionally, the user-friendly software supports multiple languages and allows for changes in display units (SI units, US units) and graph displays. 【Features】 ■ Automatic recognition and calibration function of load cells ■ Easy testing with the device alone ■ Power supply: Compatible with 110-240V ■ All test data can be exported for detailed analysis using any software *For more details, please refer to the PDF materials or feel free to contact us.
The drive system mechanism is maintenance-free! Accurate position adjustment with the jog controller.
The "QC-505M2F" is a versatile testing machine with a large testing space and long stroke, featuring a double column design. It has a maximum load of 50 kN, and its drive mechanism is maintenance-free, ensuring stable performance over the long term. Additionally, the high-performance M2F controller supports a variety of tests, including tensile (compression) tests, bending tests, creep tests, stress relaxation tests, repetitive tests, and multi-step tests that combine multiple tests. 【Features】 ■ Creep tests, repetitive tests, strain-controlled tests, foam material tests, Poisson's ratio, slip tests, etc. ■ Over 260 types of analysis menus ■ Accurate position adjustment using a jog controller ■ Optional corrosion protection for load sensors ■ Automatic recognition and calibration function for load cells *For more details, please refer to the PDF document or feel free to contact us.
