Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
331～360 item / All 394 items
![Tech Tester "KT-20" [Rental]](https://image.www.ipros.com/public/product/image/d50/2000479164/IPROS02993524382131474897.jpeg?w=280&h=280)
A testing device for managing construction equipment sites that eliminates difficult operations and pursues ease of use and simple functionality.
■ By making the display section analog, the weight of the main unit is reduced. ■ Due to its lightweight design, testing on ceilings and other structures is possible.
外壁の劣化調査・施工品質の確認に、接着力・付着力の簡易型引張試験機。
■視認性の良いLED表示、暗い場所でも安心のバックライト付 ■落下事故防止に役立つU字しゃっくるフック付 ■ピークホールド機能により最大荷重値が表示されます。 ■ワンタッチで単位面積当たりの荷重値が表示されます。（N／mm2） ■電池交換のタイミングを逃さない7段階のバッテリー残量表示付き
![Anchor Tester "DPG100" [Rental]](https://image.www.ipros.com/public/product/image/5e9/2000486056/IPROS28244284018536829759.jpeg?w=280&h=280)
Because it is lightweight, inspections of high places, ceilings, walls, and floors can be easily performed.
A high-precision anchor tester that supports safety and quality at all sites. Its lightweight design allows for easy inspections of high places, ceilings, walls, and floors. It can quickly measure anchor strength non-destructively. 【Features】 - Non-destructive testing makes it ideal for maintenance inspections as it confirms strength. - Comes in a handy case for easy portability. - Lightweight design enables solo inspections of high places, ceilings, walls, and floors. - Digital display of measurement values is possible. - Consistently high precision measurement results can be obtained. - Simple measurement of anchor displacement can also be performed simultaneously.
![Tech Tester 'KT-6' [Rental]](https://image.www.ipros.com/public/product/image/a46/2000486092/IPROS01781385703139980938.jpeg?w=280&h=280)
This is a testing device for managing construction equipment sites that eliminates difficult operations and pursues ease of use and simple functionality.
Due to its simple operation and analog (needle) design, it can be used when you want to see the measurement results. 【Features】 ■ Can be loaded with a wrench or similar tools (loading nut: width 21mm) Testing is possible even in hard-to-reach areas where the handle is difficult to turn. ■ Extremely lightweight with a body weight of 1.7kg ■ Simple analog type allows for confirmation of fine values (minimum display) ■ Equipped with a maximum value hold function using a pointer
![Techno Tester "AT-200" [Rental]](https://image.www.ipros.com/public/product/image/99b/2000486210/IPROS76727005437817613957.jpeg?w=280&h=280)
This is a testing machine that applies tensile loads to verify whether the installed anchor bolts meet the required performance.
It can measure load and displacement simultaneously. Additionally, it is equipped with an internal memory function for data storage. 【Features】 ■ Emphasis on workability. Easy to use, lightweight, and compact - The use of an aluminum cylinder reduces the body weight to 11kg. - Easy connection with hydraulic hoses (3m) equipped with one-touch couplers at both ends. ■ Accurate and reliable measurement - Internal memory function Data can be stored at the measurement site without connecting to a computer. Graph test mode: 99 entries (F01 to F99), load and displacement test mode: 9,999 entries (P0001 to P9999). - Equipped with various measurement modes. - Improved visibility in dark environments with backlight function. Even in dark sites such as tunnels or underground, the backlight function allows clear visibility of numbers to the naked eye. Recording with a digital camera is also worry-free. ■ Practical performance - Capable of measuring loads up to 200kN.
![Ior Leak High Tester 3355-01 (with 9801) [Rental]](https://image.www.ipros.com/public/product/image/85b/2000654956/IPROS62031625347645220654.jpeg?w=280&h=280)
This is an Ior leak high tester equipped with a live line megohm function that was impossible with an insulation resistance meter.
- Measure leakage current (Io) - Measure effective leakage current (Ior) - Measure insulation resistance value to ground (MΩ) - Accurately measure 1mA - Compact design for field use - Insulation inspection can be performed while live - Abundant measurement parameters
Photocatalytic activity can be measured in 3 to 5 minutes! We have pursued ease of use not only in the laboratory but also in the field.
The "PAM-NT2" is a photocatalytic activity tester designed to measure and evaluate photocatalytic activity at construction sites for quality assurance. The measurement time has been reduced to less than one-tenth, and the measurement values are displayed in three-digit digital format. The startup time is short, and stability has been improved. We have pursued ease of use not only in the laboratory but also on-site. 【Features】 ■ Measurement time reduced to less than one-tenth, with three-digit digital display of measurement values ■ Increased portability due to lightweight design ■ Short startup time and improved stability ■ Standalone type that is robust for on-site use *For more details, please refer to the PDF document or feel free to contact us.
Air leakage from small bagged products such as powders and granules can be easily checked with simple operations!
The "LS3010" is a testing machine designed to visually confirm the presence or absence of gas leaks in small packaged items such as powders and granules that are sealed with gas inside, through submerged testing. By creating a vacuum after submersion, it allows for a quicker and more reliable confirmation of air leaks in products compared to standard submerged testing. It operates with a manual switch and air ejector, making it possible to conduct tests without the need for a power supply. 【Features】 ■ Visual confirmation of gas leaks ■ Quicker and more reliable than standard submerged testing ■ Operates with a manual switch and air ejector ■ Testing possible without power supply ■ Custom holder manufacturing available upon request *For more details, please feel free to contact us.
Simplify wireless troubleshooting! Quickly assess the status of your wireless environment and identify common issues.
The "AirCheck G2" is a portable wireless network tester that supports 802.11ac. It equips technicians with clear insights into wireless networks that help reduce costly escalations. Using this product allows for quick, easy, and accurate troubleshooting and problem isolation, enabling rapid resolution of wireless issues. 【Features】 ■ Performance testing using iPerf ■ Supports connection testing on networks with captive portal functionality ■ Identifies sources of interference other than surrounding Wi-Fi ■ Compatible with Wi-Fi technologies (802.11a/b/g/n/ac) (ax is supported for detection only) ■ Detects network configuration and reception range issues *For more details, please refer to the PDF materials or feel free to contact us.
Supports GPON! A professional-grade indoor tester with Wi-Fi functionality.
The "Gigabit Tester EX1" is an indoor tester manufactured by EXFO in Canada, equipped with Wi-Fi measurement capabilities. It also supports GPON. With a single device, it can conduct speed tests for wired LAN, optical fiber, and Wi-Fi, making it effective for indoor installation tests. Test results can be output in PDF or CSV files, allowing for Wi-Fi quality certification. 【Features】 ■ Measures the speed of wired LAN and optical fiber ■ Capable of checking Wi-Fi channels at 2.4GHz/5GHz ■ Supports SFP/GPON (ITU-T G.984.x) ■ Can test 1G Ethernet speed at full wire rate (including latency, download/upload speed tests) ■ Effective for indoor installation tests *For more details, please refer to the PDF materials or feel free to contact us.
A cable tester compatible with the Cat8 standard for high-speed communication has been equipped with Wi-Fi communication functionality!
The "DSX2-8000" is a cable tester that accelerates various procedures related to certification testing of metal LAN wiring. It supports Cat8 and is capable of testing and certifying twisted pair cables for Ethernet up to 40Gb. The main unit features Wi-Fi communication capabilities, allowing data to be saved to FLUKE Networks' cloud service without the need for an external Wi-Fi adapter or Ethernet cable. 【Features】 ■ Accelerates various procedures related to certification testing of metal LAN wiring ■ Achieves faster measurement speeds for Cat6A, 8, Class FA, I/II, and all current standards ■ Supports Cat8 and is capable of testing and certifying twisted pair cables for Ethernet up to 40Gb *For more details, please refer to the PDF document or feel free to contact us.
Data can be saved to a USB memory! An air leak tester that allows for simple leak testing.
The "TLT-5000 Series" is an air leak tester that uses a fluorescent display, making it easy to see from a distance. The leak tester can display pressure and leakage graphs on the screen, allowing for immediate recognition of changes. Additionally, it supports RS232C serial communication, enabling direct transmission and reception from a computer. 【Features】 ■ Data can be saved to a USB memory ■ RS232C serial communication available ■ Graphs of pressure and leakage can be displayed on the screen ■ Compact and lightweight ■ Capable of mounting an automatic regulator *For more details, please refer to the PDF document or feel free to contact us.
Ideal for small quantities of various products and single-item mass production lines! Easy-to-handle air leak tester.
The "TLT-3000 Series" is an air leak tester that excels in low-volume, high-variety and single-item mass production lines. Switching the work number allows for instant changes to various conditions. It is very easy to handle. Additionally, it can accommodate the requirements of both electric air regulators and manual regulators. 【Features】 ■ Instant changes to various conditions with just a switch of the work number ■ Graph display allows for quick understanding of internal air pressure status ■ Air charge curve can be set arbitrarily ■ Compact and lightweight ■ Capable of meeting the requirements of electric air regulators and manual regulators *For more details, please refer to the PDF document or feel free to contact us.
Equipped with basic AE measurement functions in a compact design, it is ideal as a monitor and checker.
The AE9501B is used in combination with a piezoelectric AE sensor (sold separately). When AE is detected, the event lamp of this device lights up. It is a lightweight handheld AE tester that operates on four AA batteries.
Equipped with a variety of functions despite its compact body. A differential pressure air leak tester that pursues ease of use and cost performance.
The LS-1866 is a differential pressure air leak tester designed to inspect the airtightness of various parts and products. It is a compact, lightweight, and easy-to-handle differential pressure air leak tester that enables the automation of the leak inspection process. Despite its small size, it is equipped with master preset functions and noise reduction features, which enhance detection capability and reduce inspection time. Additionally, it includes the latest advanced features such as multi-channel capabilities and direct readout of leakage amounts.
All-in-one tester ideal for leak testing of small sealed products.
It is ideal for waterproof testing of parts and finished products that require IP standards and waterproof protection ratings. It has a built-in clamping mechanism, so it automatically clamps and seals the workpiece for leakage testing just by setting it in place. Being a tabletop device, it can be used in various situations. Compared to conventional models, it has been made smaller and lighter, while also pursuing ease of use.
Equipped with axle slip measurement functionality! A wide range of options available from compact cars to large vehicles.
We would like to introduce our vehicle inspection equipment, the "Side Slip Tester." We offer a wide range of models, from light vehicles to large vehicles. Equipped with axle slip measurement functionality for ECO maintenance of large vehicles with two front axles, we also provide a left-right separated model that can be installed on both sides of the inspection pit for large vehicles. 【Product Lineup】 ■WGW-1000BD (Axle weight 10 tons) ■WGT-1000BD (Axle weight 10 tons) ■WG-500CD (Axle weight 10 tons) ■WG-150DD (Axle weight 3 tons) ■WGK-180B (Axle weight 3.6 tons) *For more details, please refer to the PDF document or feel free to contact us.
Supports troubleshooting with abundant measurement and adjustment modes! Improved work efficiency through target changes!
The "GeoLiner GL-680XD" is a 3D alignment tester equipped with a variety of measurement and adjustment modes suitable for total diagnostics. As an optical alignment tester, it measures alignment by using a camera unit to assess targets (reflectors) attached to the tires. The camera unit is connected on both sides and is installed at the front of the vehicle, but due to its compact installation position, which is 1.5m from the front target, it minimizes interference with factory equipment. 【Features】 ■ Measurement time is approximately 5 minutes for quick measurements ■ For quick measurements of toe and camber only, the vehicle needs to be moved a total of 30° forward and backward ■ Targets can be easily attached using tire clamps ■ The height of the camera unit can be adjusted using the keyboard *For more details, please refer to the PDF document or feel free to contact us.
Measuring on-site with laboratory-level precision! Compatible with a wide frequency range.
The "HI-903" is a compact, battery-operated, self-contained vibration reference instrument. Calibration of individual sensors, switches, data collectors, and their states and accuracy, as well as recording operations, can be verified with a single unit. By using ICP or voltage test sensor inputs, it is possible to directly connect general accelerometers and velocity transducers to confirm output operations. 【Features】 ■ On-site verification of vibration sensors, proximity sensors, and other related vibration monitoring devices ■ Easy to carry and capable of measuring on-site with laboratory-level accuracy at any time ■ Supports a wide frequency range (7Hz to 10kHz) ■ Calibration data can be recorded in internal memory and output to USB flash memory ■ Issuing calibration certificates in Excel format is also easy ■ After delivery, simply turn on the power to start operation immediately *For more details, please refer to the PDF document or feel free to contact us.
Test more. Test faster. Test at a lower cost.
The "TestPro CV100" is a multifunctional cable certification tester that provides a comprehensive suite of testing features through hot-swappable test adapters. This product is available as a complete smart building testing kit, eliminating the hassle of trying to find the necessary adapters. Furthermore, there is only one high-performance TestPro platform, which is compatible with all adapters purchased in any kit, allowing for easy addition of features as needed. 【Product Lineup】 ■TestPro CV100-K11: Fiber Certification Kit ■TestPro CV100-K50: Metal Certification Kit ■TestPro CV100-K51: Metal/Fiber Certification Kit ■TestPro CV100-K60: Metal Smart Building Testing Kit ■TestPro CV100-K61: Metal/Fiber Smart Building Testing Kit *For more details, please download the PDF or feel free to contact us.
No more tripping the circuit breaker due to operator error!
The safety design prevents short circuit accidents at electrical measurement sites, ensuring the safety of operators, while convenient features such as automatic AD/DC voltage detection and voltage testing functions support measurement tasks comfortably! Equipped with a self-diagnosis mode that can check for lead disconnections and display malfunctions! Easy-to-understand backlight display and buzzer sound for measurement status, along with an LED light to illuminate the measurement target! CAT.IV 600V compatible Compact size that can be stored in the chest pocket of work clothing!
Gather testing technologies and refine manufacturing skills.
The CE-6000 Module Detection System is a high-precision charging and discharging device specially developed for testing high-power battery packs. It features high dynamic response speed, high stability and accuracy, and multiple flexible channel configurations. It supports pulse testing, cycle life testing, and simulation tests under working conditions. The system has multi-channel input and energy recovery capabilities, significantly saving energy consumed during the charging and discharging processes. It adopts a two-way high-frequency DC conversion topology combined with a high-performance multi-channel 24-bit AD conversion chip. The system's sampling resolution and output stability are higher than those of conventional equipment. *For more details, please download the PDF or feel free to contact us.*
*Free materials available now! A must-see for those who don't know the basics of in-circuit testers that you can't ask about anymore!
To ensure that electronic devices function correctly, the electronic circuit board within the device must operate normally. The electronic circuit board operates when electronic components are correctly mounted on a printed circuit board (PCB) and power is supplied. The inspection of the electronic circuit board in the state where these electronic components are mounted is called In-Circuit Testing (ICT). An in-circuit tester is a testing device aimed at checking the connection reliability between electronic components and the board, as well as detecting component errors. By inspecting the values of individual electronic components (such as resistors and capacitors) and diode characteristics with minute electrical signals, the board can be tested for quality without imposing unnecessary loads on it. It is also referred to as MDA (Manufacturing Defect Analyzer). Main inspection items: ● Solder shorts and opens ● Pattern disconnections ● Missing components ● Incorrect component values ● Reverse insertion of polarized components ● Lifted leads of ICs and connectors ● Operation verification of digital transistors, optocouplers, and Zener diodes ● Other simple function tests
This is a must-see for those who don't know the basics of in-circuit testers that you can't ask about now!
In in-circuit testing using a flying probe tester, there are five significant advantages that traditional fixture-based testers do not have. These advantages are: 1. Each time, the position is confirmed with a camera for each inspection board, and the contact position is corrected. There is no need to worry about adjusting the set position. 2. If there is an error due to positional deviation, the contact position can be automatically adjusted, and re-inspection can be performed. There is no need for the operator to manually re-inspect, reducing false reports. 3. The contact speed can be flexibly adjusted. Depending on the areas to be measured, hard and soft contacts can be used interchangeably. 4. Components that cannot be electrically tested can be supplemented with the included AOI inspection function. 5. There are no running costs, no lead time for fixture creation, and no need for storage space. By maximizing these advantages, we enable higher precision and shorter inspection times for circuit boards, contributing to the reduction of inspection costs for our customers. For more detailed information, our sales representatives will provide explanations, so if your company is considering a replacement for fixture-based testers, please feel free to contact us.
![[Case Study] Full Inspection of PCBs Requiring Higher Quality and Reliability](https://image.www.ipros.com/public/product/image/17d/2000667102/IPROS96578941002839350961.jpeg?w=280&h=280)
Active in various industries such as automotive, aviation, infrastructure, healthcare, and military!!
We would like to introduce a case where a flying probe tester was implemented for 100% inspection of printed circuit boards, which require a focus on quality and reliability. *Challenges - There are defects that cannot be detected by AOI (Automated Optical Inspection) or X-ray inspection, such as shorts caused by very fine wire-like solder bridges. - Subjecting a shorted PCB to functional testing poses risks such as fire and board failure, and it is difficult to identify the true location of the defect. *Implementation Effects - By utilizing a flying probe tester that inspects the mounting state with fine electrical signals, we were able to identify mounting defects without putting unnecessary stress on the PCB. - By combining it with AOI and X-ray inspection, we were able to further expand the inspection range and improve reliability. For more details on the flying probe tester, please download the PDF catalog or feel free to contact us.
![[Case Study] Electrical Testing from the PCB Prototyping Stage](https://image.www.ipros.com/public/product/image/859/2000667112/IPROS38496786898190943621.jpeg?w=280&h=280)
No need for jig creation or rework!! Enables quick inspection input at low cost!!
We would like to introduce a case where a flying probe tester was implemented for electrical testing from the prototype stage of the circuit board. *Challenges - With a fixture-based tester, it was necessary to recreate the fixture for each prototype, leading to high costs. - When design changes occurred, the fixture also had to be redone, which took time. *Benefits of Implementation - By using a flying probe tester, there is no need to create fixtures; inspection can be initiated immediately by simply creating an inspection program, enhancing quality from the prototype stage. - During design changes, adjustments can be made by simply modifying the inspection program, eliminating extra effort. - From the prototype stage, defective content and causes are quickly fed back to the previous processes, allowing for improvements in circuit board manufacturing design and assembly processes from the early stages of production, thus preventing significant issues close to mass production. For more details on the flying probe tester, please download the PDF catalog or feel free to contact us.
![[Case Study] Immediately after mass production startup (period until jig completion)](https://image.www.ipros.com/public/product/image/4e9/2000667118/IPROS78780680142584566514.jpeg?w=280&h=280)
Immediately start electrical testing right after the start of mass production, when the defect rate is highest!
We would like to introduce a case where a flying probe tester was implemented during the period leading up to the completion of the fixtures, immediately after the start of mass production. *Challenges - The creation of fixtures for fixture-type testers usually takes about a month, so if there are specification changes just before mass production, it can be difficult to arrange the fixtures in time. *Benefits of Implementation - The flying probe tester can start inspections on the same day as long as the inspection program is created. This allows for immediate inspections right after the start of mass production, when the defect rate is highest, providing reassurance to our customers. For more details about the flying probe tester, please download the PDF catalog or feel free to contact us.
![[Case Study] Analysis of defective circuit boards returned from downstream processes and the market.](https://image.www.ipros.com/public/product/image/316/2000667169/IPROS76391750609793454966.jpeg?w=280&h=280)
Easily identify the faulty areas on the circuit board for anyone!
We would like to introduce a case where Takaya's flying probe tester was implemented for failure board analysis in the quality assurance department. *Challenges Approximately 150 to 200 boards per month are returned from domestic and international markets due to failures. Operators were repairing by searching for defective areas with handheld testers, but it was labor-intensive, so automation was desired. The main causes of defects include component lifting, pattern breaks, and component destruction. Due to the variety of product types and the high cost of creating inspection jigs, inspection using the flying probe tester was introduced. The causes of defects include component lifting, pattern breaks, and component destruction. 〇Results - Faulty components were identified quickly without labor or oversight. - Simple functional testing allows for simultaneous operation testing. - By utilizing the accumulation and analysis functions of inspection results, trends such as differences in failure modes based on the country of shipment for the same board can be fed back into design. For more details about the flying probe tester, please download the PDF catalog or feel free to contact us.
Top-class industry share! Introduction of the flying probe tester.
The electronic circuit board that serves as the basis for controlling electronic devices is one of the important components used in a wide range of fields. The "Flying Probe Tester" is an inspection machine that quickly and reliably detects various defects that occur during the manufacturing of this board. Takaya Corporation developed and began selling the "Flying Probe Tester" in 1987. It is a pioneering presence in the assembly board inspection machine industry, boasting a top-class share in the market even today. 【Features of the Flying Probe Tester】 ■ Measurement system capable of detecting various component defects ■ Ultra-fast and accurate probe contact control ■ Utilizes unique vertical probes to significantly expand the inspection area ■ Equipped with an interface compatible with smart factory applications ■ Unique clamping mechanism that can accommodate special-shaped boards ■ Function test capabilities with expandability ■ AOI (Automated Optical Inspection) function included ■ +α A diverse lineup and options that can accommodate large boards If you are interested in the flying probe type in-circuit tester or are facing issues with electrical testing of assembly boards, please feel free to contact us.
Equipped with a high-performance measurement system and a variety of functions, it contributes to quality improvement from prototyping to mass production!
The APT-2400F boasts industry-leading probing accuracy capable of inspecting high-density mounted circuit boards, and through its unique control mechanisms and sensing technology, it achieves highly reliable electrical testing in all environments. It is the next-generation flying probe tester. We accept evaluation tests at our demo rooms in Okayama headquarters and Tokyo branch, where you can bring in your circuit boards. We can conduct a series of tests including the creation of inspection programs, testing with actual circuit boards, and summarizing evaluation results. *For more details, please feel free to contact us.
