Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.
751～765 item / All 937 items
Distribution outlet (Carecom specification) BC-4RS
■Overview ●Up to two sensors (plug type) can be connected to the Carecom 4-pin nurse call system (Type R, Type S). ●Existing handheld substation outlets and handheld substations can be used in conjunction with the sensors. ●It is an exposed type and comes with a mounting magnet and hook on the back.
This is a wireless wandering notification set that alerts you when the mat sensor is stepped on.
■Notification of Elderly Wandering ■Please place the mat sensor near the exit. When an elderly person who tends to wander steps on the mat sensor while trying to go out, it will transmit a signal and notify the receiver. ■Choose from 6 types to suit your needs ■We offer standard and wide sizes for the mat sensor, and fixed, portable, and tabletop types for the receiver. We have prepared 6 types by combining these options, so please choose according to your needs. - HS-W(T): Mat Sensor/Standard Size, Receiver/Tabletop Type - HS-W(KE): Mat Sensor/Standard Size, Receiver/Portable Type - HS-W: Mat Sensor/Standard Size, Receiver/Fixed Type - HS-W68(T): Mat Sensor/Wide Size, Receiver/Tabletop Type - HS-W68(KE): Mat Sensor/Wide Size, Receiver/Portable Type - HS-W68: Mat Sensor/Wide Size, Receiver/Fixed Type *This set includes one mat sensor, one transmitter, and one receiver, but additional units can be purchased separately.
This is a wireless wandering notification set that alerts you when the mat sensor is stepped on.
Notification of Elderly Wandering Please place the mat sensor near the exit. When an elderly person who tends to wander steps on the mat sensor while trying to go out, it will transmit a signal and notify the receiver. Six types available to choose from based on your needs Tabletop type: You can choose from 8 different melodies or chimes, and it visually notifies you with a built-in flashlight. The notification time can be selected from 7 options ranging from 3 seconds to 120 seconds, including a "continuous" option. Installation type: You can choose between a "hold mode" that continuously sounds and displays a lamp until reset after receiving the signal, or a "3-second mode" that ends after 3 seconds. Portable type: Compact and lightweight, rechargeable with a dedicated charger. It notifies you with three levels of volume, vibration, and an LCD display. You can select the notification time (20 seconds/2 minutes/5 minutes/10 minutes). A strap is also included. Wireless, no wiring required ● The transmission range of the transmitter is approximately 100 meters in clear sight, allowing for easy use without worrying about wiring. ● The signal is pre-registered, so you can use it immediately.
This is a wireless wandering notification set that alerts you when the mat sensor is stepped on.
■Notification of Elderly Wandering ■Please place the mat sensor near the exit. When an elderly person who tends to wander steps on the mat sensor while trying to go out, it will transmit a signal and notify the receiver. ■Choose from 6 types according to your needs ■We offer standard and wide sizes for the mat sensor, and fixed, portable, and tabletop types for the receiver. We have prepared 6 types based on different combinations, so please choose according to your needs. - HS-W(T): Mat Sensor/Standard Size, Receiver/Tabletop Type - HS-W(KE): Mat Sensor/Standard Size, Receiver/Portable Type - HS-W: Mat Sensor/Standard Size, Receiver/Fixed Type - HS-W68(T): Mat Sensor/Wide Size, Receiver/Tabletop Type - HS-W68(KE): Mat Sensor/Wide Size, Receiver/Portable Type - HS-W68: Mat Sensor/Wide Size, Receiver/Fixed Type *This set includes one mat sensor, one transmitter, and one receiver, but additional units can be purchased separately.
It is a wireless wandering notification set that uses a mat sensor placed in a wandering area to alert when the mat sensor is stepped on.
■Features ● This is a combination product of the mat sensor transmitter and the tabletop receiver "HC-350" / portable receiver "RXF-60K". ● It is pre-registered for radio transmission settings so that you can use it immediately. ● When the mat sensor is stepped on, it transmits a signal, and the receiver installed within 100 meters will notify you. (However, the distance may be shorter depending on surrounding conditions, such as inside reinforced concrete buildings.) ■Mat Sensor Transmitter ● It has a user-friendly size of 400mm x 800mm. ● It has a pause timer that temporarily halts operation (for about 5 minutes). ● When the battery level is low, both the transmitter and receiver will notify you. ● It is a high-sensitivity, thin type with a thickness of 6mm, and the backside is treated with a non-slip finish to prevent slipping on the floor. ● The battery life is approximately 2 years with 10 transmissions per day (using 2 AA alkaline batteries). ● It has a simple waterproof structure. ■Selectable "Receiver" <Tabletop Receiver> ● When it receives a signal from the transmitter, it notifies you with a gentle melody (chime sound) and a flashlight. ● You can choose from 8 different melodies (chime sounds). ● The notification time can be selected from 3 seconds to 120 seconds in 7 variations, as well as continuous notification.
A bed sensor with an integrated transmission unit! It is easy to operate and handle because there are no wires.
■Usage and Operation ●It is used by placing it under the sheets or under the futon. ●Please use it for those who have difficulty getting up from or leaving the bed. ●It wirelessly notifies a receiver 100 meters away when getting up from the bed. ■Bed Sensor Transmitter ●The time to determine getting up can be set in 8 different ways (1 to 8 seconds). ●The pause timer temporarily halts operation (for about 5 minutes). ●The sensor part is a high-sensitivity, thin type with a thickness of 5mm (size: 250mm x 800mm). ●It comes with "non-slip backing" and "string threading holes" to prevent slipping. ●The battery life is about 2 years with 10 transmissions per day (using 2 AA alkaline batteries). ●It has a simple waterproof structure. ●Non-slip bed sensor ●The transmitter and detection parts are integrated, allowing for easy transport without tangled cords. ■Radio Wave Characteristics ●The transmission range of the transmitter is approximately 100 meters in line of sight. It can be easily installed in homes or places without existing nurse call systems. ●The radio waves are pre-registered, so it can be used immediately.
This is a wireless wandering notification set that alerts you when you get out of bed.
■Features ● This is a combination product of the bed sensor transmitter "TX-BS3" and the tabletop receiver "HC-350"/portable receiver "RXF-60K." It is pre-registered for radio frequency settings so that it can be used immediately. ● The bed sensor is placed under the sheets or futon. ● When the user gets up from the bed, it transmits a signal, which is received by the receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as in reinforced concrete buildings.) ● The bed sensor is an integrated unit with a detection part and a transmission part, making it easy to install and carry. ● It has a wake-up time setting function, allowing for operation tailored to the user. ■Bed Sensor Transmitter ● The wake-up judgment time can be set to one of eight options (1 to 8 seconds). ● The pause timer temporarily halts operation (for about 5 minutes). ● The sensor part is a high-sensitivity, thin type with a thickness of 4mm (size: 250mm x 800mm). ● It features a "non-slip back" and "string threading hole" to prevent slipping. ● The battery life is approximately 2 years with 10 transmissions per day (using 2 AA alkaline batteries). ● It has a simple waterproof structure.
A wheelchair is used with a seat sensor placed on the chair. When you get off (or fall from) the wheelchair, it will notify you with a flash and melody.
Features ● This is a combination product of the seat sensor "BSP-33," the jack-equipped transmitter "HC-116(B)," and the tabletop receiver "HC-350"/portable receiver "RXF-60K." ● It is pre-registered for radio frequency settings so that it can be used immediately. ● If the user gets off (or falls from) the wheelchair, it will notify you with a receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as inside reinforced concrete buildings.) Seat Sensor - Daily life waterproof specification ● Detection output: No-voltage a contact (when pressed) ● Pressure sensitivity: 1.6–1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● External dimensions: 330 × 330 × 6 mm ● Lead wire: 1m cable with Kevlar wire (cream color/RCA plug included) Dedicated Jack-equipped Transmitter HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip.
It is used by placing a seat sensor on a wheelchair or chair.
■Features ● This is a combination product of the seating sensor "BSP-33," the transmitter with jack "HC-116(B)," the tabletop receiver "HC-350," and the portable receiver "RXF-60K." ● It is pre-registered for radio frequency settings so that it can be used immediately. ● If the user gets off (or falls from) the wheelchair, it will notify you with a receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as inside reinforced concrete buildings.) ■Seating Sensor - Daily life waterproof specification ● Detection output: No-voltage a contact (when pressure is applied) ● Pressure sensitivity: 1.6–1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● External dimensions: 330 × 330 × 6 mm ● Lead wire: 1m cable with Kevlar wire (cream color/RCA plug included) ■Dedicated Transmitter with Jack ■HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip.
We will notify your family 100 meters away. The tabletop receiver will alert you with a flash and melody.
■Quickly detect wandering elderly individuals ■Sensors installed near exits quickly capture the movements of wandering elderly individuals and notify you through receivers set up within 100 meters. ■This helps protect the safety of the elderly and reduces the burden on their caregiving families. ■Notification through sound and light ■When wandering is detected, the receiver installed within 100 meters alerts you with melodies and flashes. ■Installable anywhere without location restrictions ■The sensors are battery-operated, allowing installation in places without power. ■Additionally, they are wireless, eliminating the need for wiring work, and they are compact and unobtrusive. ■Wandering Notification Detection Set ■We offer a lineup of combinations with two types of transmitters and three types of receivers, totaling six variations.
It is a sensor with two functions: "Wandering Notification" and "Emergency Call." It is easy to use; just clip it to something you want to be notified about when it is moved away.
■Operation ■The clip emergency sensor transmitter can be attached to items you want to be notified about when they are moved or separated. When the string is pulled, it sends a low-power radio signal to a receiver within 100 meters to alert you. ■Clip Emergency Sensor Transmitter 《Two Convenient Functions》 ●The call button on the main unit can be used for emergency contact or calling. ●It can be used by clipping it onto items you want to be notified about when they are moved away. 《Easy Installation and Operation with Abundant Accessories》 ●You can use the included long and short clips and carabiners for various purposes. ●The transmitter can be easily mounted using the included double-sided tape or Velcro tape. 《With On/Off Switch》 ●It comes with an on/off switch for staff or family members. (The main unit's "call" button operates continuously regardless of ON/OFF.) ●The transmitter uses two AA alkaline batteries, which can last for about 5 years (if transmitting 10 times a day). It also has a low battery alert function. 《No Wiring Required》 ●The radio signal reach from the transmitter to the receiver is approximately 100 meters in line of sight. It can be easily installed in homes or facilities. ●The clip-on string has a safety feature that detaches when a certain amount of force is applied.
In case of emergency, simply press the transmitter to call for staff. The tabletop receiver will notify you with a flash and melody.
■Emergency Call Set ■The Emergency Call Set features two types of transmitters and three types of receivers, offering six combinations. - ECS-1P(T): TXF-110, HC-350 set - ECS-1P(KE): TXF-110, RXF-60K set - ECS-1P: TXF-110, HC-300 set ■Selectable Transmitters for Various Uses ● TXF-110 A pendant-type transmitter that is easy for the elderly to press even in emergencies. It has a waterproof structure suitable for daily life. ● TX-122 A pendant-type transmitter (not waterproof) that sends a signal by pressing both buttons on either side simultaneously. ■Selectable Receivers for Various Uses ● HC-350 (Desktop Receiver) This desktop model can be used immediately by simply plugging the included AC adapter into an outlet. You can choose from eight melodies or chimes, and it visually alerts you with a built-in flashlight. The alert duration can be selected from seven options ranging from 3 seconds to 120 seconds, as well as a "continuous" option. The transmission range of the transmitter is approximately 100 meters in line of sight. ● RXF-60K (Portable Receiver) Compact and lightweight, rechargeable with a dedicated charger included. The radio frequency is already registered.
In case of emergency, simply press the transmitter to call the staff. The tabletop receiver will notify you with a flash and melody.
■Emergency Call Set The emergency call set features two types of transmitters and three types of receivers, offering six combinations. - ECS-1P(T): TXF-110, HC-350 set - ECS-1P(KE): TXF-110, RXF-60K set - ECS-1P: TXF-110, HC-300 set ■Selectable Transmitters for Various Uses ● TXF-110 A pendant-type transmitter that is easy for the elderly to press even in emergencies. It has a waterproof structure suitable for daily life. ● TX-122 A pendant-type transmitter (not waterproof) that sends a signal by pressing both buttons on either side simultaneously. ■Selectable Receivers for Various Uses ● HC-350 (Desktop Receiver) This desktop model can be used immediately by simply plugging the included AC adapter into an outlet. You can choose from eight melodies or chimes, and it visually alerts you with a built-in flashlight. The notification time can be selected from seven options ranging from 3 seconds to 120 seconds, as well as a "continuous" option. The transmission range of the transmitter is approximately 100 meters in an unobstructed view.
In case of an emergency in the bathroom, it can be called wirelessly. It comes with a cord of approximately 1.7m, allowing for installation at high locations.
■For emergency calls in the bathroom or toilet ■Pull the transmitter's cord or press the transmitter's call button to alert the receiver, which will sound an alarm. ■Features ● The main unit, pull cord, and grip rubber are antibacterial. The pull cord is approximately 1.7m long, adjustable for length, and equipped with a safety feature (the joint will detach when a certain force is applied). ● Designed for use in bathrooms, toilets, and outdoors, it has a waterproof structure suitable for daily life. ● The power source uses two AA alkaline batteries, with a battery life of about 5 years when transmitting 10 times a day. ■Wireless, no wiring required ■Uses low-power radio waves, eliminating the need for wiring, allowing for easy installation in various locations within the home, not just the bathroom. ■Operation ● When the pull cord is pulled or the call button is pressed, a red light flashes to notify receivers within 100m. ■Radio wave reach distance is approximately 100m in line of sight (between transmitter and receiver) ■The transmitter's radio wave reach distance is approximately 100m in line of sight. ■Extension of radio wave reach distance ■By installing a relay unit (RTX-100), the radio waves can be relayed up to 2 times (for 2 units), extending the radio wave reach distance.
This is a set product consisting of the foot call transmitter "HCT-FC1" and the tabletop receiver "HC-350."
■Features ● Instead of the switches that have been casually pressed by hand, this device can be used in medical and caregiving settings to protect against infections such as the coronavirus, as well as for staff calls, automatic door unlocking, and emergency button purposes. ● The switch section employs a seesaw-style pedal that detects pressure from either side. ● It comes with a "protective cover" to prevent accidental activation due to falling objects.
