Surveillance Equipment Product List and Ranking from 43 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

Surveillance Equipment Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. アーバンストリーム SolarRemon事業部 Aichi//Other construction industries
  2. 協立電機 Shizuoka//Information and Communications
  3. 光商工 Tokyo//Trading company/Wholesale
  4. 4 リクチ漏水調査 Tokyo//Building Management
  5. 4 幸袋テクノ 本社・工場 Fukuoka//Other construction industries
Go to Company Ranking

Surveillance Equipment Product ranking

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. Remote monitoring device for solar power plants "SolarRemon" アーバンストリーム SolarRemon事業部
  2. Water Quality Continuous Monitoring Device "Unireleaf" 協立電機
  3. Low voltage direct grounding circuit I0r detection method insulation state monitoring device 光商工
  4. Leakage monitoring device "L-sign for water distribution pipes" リクチ漏水調査
  5. 4 Current monitoring device "Current Monitor" 幸袋テクノ 本社・工場

Surveillance Equipment Product List

91～105 item / All 110 items

Displayed results
Insulation Monitoring Device "Leakele"

Insulation Monitoring Device "Leakele"

Remote monitoring via LAN connection is possible! An insulation monitoring device that can save measurement data using an SD card.

"Leakele" is an insulation monitoring device that continuously monitors leakage current using the leakage current detection method "TrueR." It supports low voltage up to 600V and can measure up to 8 banks. It accurately detects Ior, which is a factor in ignition and electric shock. Additionally, it can monitor the signs of insulation deterioration in electrical circuits and load equipment, allowing for continuous monitoring while the circuit is live. 【Features】 ■ Supported circuits: Single-phase and three-phase (Δ and Y connections) ■ Measurement data storage via SD card ■ Detailed memory function during alarm activation (250ms) ■ Remote monitoring via LAN connection ■ Low voltage support up to 600V ■ Capable of measuring up to 8 banks *For more details, please refer to the PDF document or feel free to contact us.

  • Security cameras and surveillance systems
  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
T.S.K Multi-parameter Water Quality Automatic Monitoring Device 'KW2'

T.S.K Multi-parameter Water Quality Automatic Monitoring Device 'KW2'

For monitoring the water quality of dams, lakes, and rivers! By combining solar cells and wireless communication, a system configuration without wiring from the ground is possible!

The "KW2" is a multi-parameter water quality automatic monitoring device that can be configured as a wireless system from the ground by combining solar cells and wireless communication. It automatically measures up to seven parameters, including the five basic parameters of turbidity, water temperature, pH, dissolved oxygen, and electrical conductivity, along with chlorophyll a and COD (alternative method). In dams and lakes, it can be combined with an electric winch to measure vertical distribution up to 100 meters. 【Features】 ■ In the case of fixed water depth - The detector is fixed to the protector and installed in a protective tube or similar - The detector is connected to the control panel via a dedicated cable - The control panel records data and can output externally ■ In the case of vertical observation - The detector is fixed to the protector and connected to an armored cable - The electric winch raises and lowers the detector by winding and unwinding the armored cable - The control panel and data processing computer communicate to execute data recording, plotting, reporting, and external output *For more details, please download the PDF or contact us.

  • Water quality/pH measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water Quality Monitoring Device 'QW-3000/4000'

Water Quality Monitoring Device 'QW-3000/4000'

Concentrate maintenance and replacement parts on the door side! Continuously and automatically measure the quality of tap water.

The "QW-3000/4000" is a water quality monitoring device that can continuously and automatically measure the water supply parameters of "turbidity," "color," "residual chlorine," and "water pressure." By installing independent main components such as the turbidity meter, residual chlorine meter, and zero water filters on the door side, the ease of component replacement and maintenance for each has significantly improved. Please use it for water quality monitoring at the outlet of water purification plants, the inlet and outlet of distribution reservoirs, and at the ends of pipes. 【Features】 ■ Continuous automatic measurement of water quality in tap water ■ Improved maintenance ■ Concentrated arrangement of maintenance and replacement parts on the door side ■ Equipped with an automatic cleaning function ■ Usable for water quality monitoring at the outlet of water purification plants, the inlet and outlet of distribution reservoirs, and at the ends of pipes *For more details, please refer to the PDF document or feel free to contact us.

  • Water quality/pH measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ground Monitoring Device 'SYMEGA.SI'

Ground Monitoring Device 'SYMEGA.SI'

Equipped with a no-voltage relay contact (2 systems)! Achieving safe and good grounding connections for mobile, metallic, conductive equipment.

The "SYMEGA.SI" is a grounding monitoring device installed in switch cabinets located outside of explosive hazard areas. It ensures safe and effective grounding connections for mobile, metallic, and conductive equipment. The grounding circuit and LED are designed to be intrinsically safe and explosion-proof, visually representing the grounding status in an easily understandable manner for users. Additionally, to ensure maximum safety, it can be fully integrated into the process control system via a voltage-free relay contact (2 circuits), allowing for monitoring of the grounding status. It is suitable for use in explosive areas (hazardous locations) in Zone 0 and Zone 20. 【Technical Data (Excerpt)】 ■ Applicable Hazard Areas (Measurement Circuit): Non-explosion-proof areas, Zone 0, 1, 2 / Zone 20, 21, 22 ■ Assembly: To be carried out in a non-hazardous area ■ Measurable Explosion-Proof Areas: Zone 0 / Zone 20 ■ Housing Size: 35×110×105mm *For more details, please download the PDF or feel free to contact us.

  • Company：REMBE
  • Price：Other
  • Monitoring and Control Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Remote monitoring device for wildlife capture traps "Oriwana System"

Remote monitoring device for wildlife capture traps "Oriwana System"

The communication infrastructure for future wildlife damage prevention will rely on long-distance wireless technology that connects even in the mountains, rather than depending on mobile networks.

The remote monitoring device for wildlife capture traps, "Oriwana System," features high-output long-distance communication and relay capabilities unique to GEO-WAVE, allowing for extensive communication even in mountainous areas where mobile signals are often weak. It enables remote monitoring of the operational status of many traps from afar, contributing to increased efficiency and reduced workload. The equipment is compact and lightweight, eliminating the need for complex wiring or extensive construction, making relocation easy. Administrative staff and capture personnel can change or expand installation locations according to the hunting grounds. 【Features】 - Understand the operational status of distant traps, enabling more efficient patrols. - Zero communication fees, keeping costs low even for large-scale deployments. - Automatically builds a robust mesh network that is resilient to communication disruptions. - Cloud-compatible for smart information sharing. - Flexible compatibility with devices owned by users, among others. *For more details, please download the PDF or feel free to contact us.

  • Information and communication equipment and infrastructure
  • Pest and insect control products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Monitoring and diagnostic solutions for optical fiber networks.

Monitoring and diagnostic solutions for optical fiber networks.

24 hours a day, 365 days a year, monitoring and diagnosing the fiber optic network! We protect your vital lifeline!

We provide a "fiber optic network monitoring and diagnostic solution" that enables long-distance monitoring of optical fibers with a high dynamic range of 32dB/24dB (1610nm)! Automatically measures up to 8 optical fibers at remote locations at intervals of 10 to 360 seconds. In the event of a failure, it immediately alerts to the anomaly. We monitor fiber optic networks and provide real-time network diagnostics and improvements to service level agreements (SLA) for telecommunications operators, dark fiber providers, power companies, and enterprises. The PL-1000D integrates an optical pulse tester (OTDR) and an optical spectrum analyzer (OSA) into a 1U box, minimizing rack space and improving CAPEX and OPEX. The PL-1000D reduces costs and time as it eliminates the need to dispatch technicians to the field and requires no dedicated testing equipment.

  • Other Software
  • Other measuring instruments
  • Information and communication equipment and infrastructure

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Moored Balloon "RT SkyStar Series"

Moored Balloon "RT SkyStar Series"

For public safety, event security, and mid-range surveillance! Capable of continuous operation for 72 hours. *Adopted for the Tokyo Olympics and Paralympics!

The "RT SkyStar Series" is a tethered balloon that has a proven operational track record in surveillance, reconnaissance, and communication applications for government agencies and military forces. It features a mobile tethering device, a high-performance sensor array, a ground control unit, a power and communication supply tether, lightweight components, an ultra-high precision stabilization gimbal, and high-performance sensors. Additionally, it can operate continuously for 72 hours and can be refilled with helium within a downtime of 20 minutes. Various sensors, including lightning detection and lift detection, ensure safety. 【Features】 - Capable of long-term deployment of radios, cameras, etc. - Continuous operation for 72 hours - Helium refill possible within a downtime of 20 minutes - No risk of falling due to being tethered (rapid descent in case of gas leakage detected by alarms) - Safety ensured by various sensors, including lightning detection and lift detection *For more details, please refer to the PDF document or feel free to contact us.

  • Security cameras and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vibration monitoring device SmartCheck

Vibration monitoring device SmartCheck

Compact sensor-integrated online vibration monitoring system. Proven performance in motors, blowers, pumps, and reducers.

The vibration monitoring device for predictive maintenance, "SmartCheck," is palm-sized and equipped with: - Input: Built-in vibration and temperature sensors (+ external input) - Calculation: CPU and software for vibration analysis - Output: LED, browser software, SLMP, etc. It is an all-in-one predictive maintenance solution. 【Features】 1. High analysis accuracy based on the expertise of bearing manufacturers. 2. Diagnoses equipment condition with just a simple initial setup. By inputting detailed specifications of the equipment, a more detailed diagnosis can be made. → Both can be achieved with this single device. 3. The summary of diagnosis results can be checked on-site via LED. Detailed diagnosis results can be checked in the office using a PC browser. → Both can be achieved with this single device. 4. Predictive maintenance by measuring both vibration and temperature. 5. Equipped with SLMP protocol: High compatibility with Mitsubishi Electric products. *For more details, please refer to the PDF document or feel free to contact us.

  • Automatic Control Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Avoiding Unexpected Interruptions in the Lumber Processing Workflow

[Case Study] Avoiding Unexpected Interruptions in the Lumber Processing Workflow

Improving plant availability! Introducing the achievements of SmartCheck in Swedish wood processing.

We would like to introduce a case study from Norra Timber sawmill using our vibration monitoring solution. When the main motor fails, the plant stops, and it takes several hours to resume operations. To avoid such issues, the sawmill was looking for a diagnostic solution. Our experts recommended 'SmartCheck' for motor vibration monitoring. This maintenance solution allows for early detection of alarm causes and visualization of potential damage, enabling proactive planning of maintenance work. [Benefits for the customer] ■ No costs incurred due to production stoppages through predictive maintenance ■ Low system implementation costs ■ Reduction in maintenance costs ■ Improved security through an autonomous reporting system *For more details, please refer to the PDF document or feel free to contact us.

  • Monitoring and Control Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water Level Measurement Communication/Monitoring Device 'AQUA-correo'

Water Level Measurement Communication/Monitoring Device 'AQUA-correo'

The dimensions of the main unit are just W68×H115×D28mm! With the automatic writing function, you can have peace of mind with long-term backup.

The "AQUA-mail" is a water level measurement communication/monitoring device that allows easy confirmation of the current water level, data stored in memory, and offset settings on an LCD screen, featuring a high-visibility backlight for use in dark environments. It supports SIM card communication compatible with LTE networks from various carriers. By using an IoT SIM card for data communication, it enables cost-effective communication. You can monitor the measured water level data on the cloud, and it is possible to check water level information remotely via a PC or tablet browser, as well as send alarm emails to on-site personnel. 【Features】 ■ LTE communication SIM compatible ■ Alarm control ■ LCD display ■ Energy-efficient and compact design ■ ICT service compatible *For more details, please download the PDF or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] SmartFitPRO

[Case Study] SmartFitPRO

No wiring required! Introducing examples of remote maintenance that can be achieved without going to the device.

We will introduce a case study of the implementation of "SmartFitPRO" for measuring the electrical power consumption of manufacturing equipment. With the introduction of this product, there were challenges such as high costs, complex wiring, and maintenance due to the need for sensor installation and LAN construction to acquire the power consumption of equipment dispersed throughout the factory or plant. However, since it only requires attachment to the equipment and communication is done wirelessly, there is no need for wiring. Firmware and parameter updates can be performed remotely, allowing for maintenance without having to go to the equipment. [Case Overview] ■ Topic: Monitoring the power consumption of individual devices ■ Effect: Direct attachment to the device, no LAN construction required *For more details, please refer to the related links or feel free to contact us.

  • Management System

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
LWAP Company Exhibition Information - "Cable Live Line Fault Monitoring Device Mantis"

LWAP Company Exhibition Information - "Cable Live Line Fault Monitoring Device Mantis"

Decision to exhibit at the 4th Railway Technology Exhibition! Demonstration of Mantis (a device that protects cables from theft and monitors and analyzes the status of live cables 24/7) on-site.

The Mantis cable live-line fault monitoring device, made in the USA, is scheduled for a demo exhibition at the 4th Railway Technology Exhibition held at Makuhari Messe from November 11 to 13, 2015! In collaboration with LIVEWIRE ASIA PACIFIC & T.E.M. Incorporated, the best partnership! 【4th Railway Technology Exhibition - Exhibition Information】 ■ Dates: November 11 (Wednesday) to 13 (Friday), 2015 ■ Venue: Makuhari Messe (Booth Number: K-18) ■ Exhibited Products: Live-line cable testers / Live-line cable fault monitoring devices / Communication cable testers, etc. We look forward to your visit. Mantis is equipped with the spectrum spreading time-domain reflectometry technology "SSTDR," making it the industry's first live-line cable fault monitoring device. It monitors cable disconnections, short circuits, and other faults in real-time, 24 hours a day, allowing for an understanding of cable conditions through an automatic reporting system. • Battery-powered for use during power outages • Can connect to devices via Wi-Fi, mobile networks, or wired LAN • Maximum cable measurement distance of 6 kilometers • Multiple units can be used in conjunction • Easy operation for saving and transferring monitoring data • Compatible with Android

  • Road construction
  • Electrical Equipment Testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of e-Wireless Patrol Implementation] Machinery

[Case Study of e-Wireless Patrol Implementation] Machinery

Introducing a case where the exchange period has been maximally extended and maintenance can be performed.

We would like to introduce a case where "e-Wireless Patrol" was installed on the motors of the painting equipment for can manufacturing and the impeller of the shot blast. Before the introduction, there were issues with abnormal vibrations, equipment stoppages, and regular inspections (replacements were made on the safe side), resulting in short cycles. After the introduction, by monitoring the vibrations of the impeller, we were able to evaluate the timing for replacement due to wear based on vibration values, thus extending the replacement period to the maximum and allowing for maintenance. [Points of Evaluation] ■ The introduction cost was low, and immediate trials (verification with demo units) were possible. ■ The expected benefits after verification led to the decision to implement. ■ They provided careful support for various challenges during the introduction. *For more details, please refer to the PDF document or feel free to contact us.

  • Security cameras and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Demonstration Video Released] Mold Monitoring Device PLUS-E Achieves 4-Time Monitoring!

[Demonstration Video Released] Mold Monitoring Device PLUS-E Achieves 4-Time Monitoring!

With the realization of 4-time monitoring, product monitoring is also possible! The mold monitoring device PLUS-E achieves 4-time monitoring during insert molding and two-color molding!

The mold monitoring device PLUS-E PE-600 detects "residues," "short shots," and "ejector pin breakage," which can cause "mold damage" during the plastic molding process, and controls the molding machine to prevent costly mold damage. It continues to provide mold monitoring through digital color image processing and an operating environment via the main touch panel, while achieving the previously difficult task of four-time monitoring! This also enables product monitoring on the traverse, preventing the outflow of defective products. It allows for more precise monitoring of molding processes (insert molding and two-color molding) for electronic components, automotive parts, and electrical equipment. This function is available as an option for customers who either purchase the "PLUS-E PE-600" new or are already using it. 【Benefits of Implementation】 ■ Prevention of mold damage ■ Increased efficiency and high cycle rates in production lines ■ Prevention of defective product outflow ■ Traverse monitoring

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.