1～15 item / All 164 items
Light-type active sensor DA-1100-24C
■Features ● Can be used for unlocking electric locks. ● Ceiling-mounted light sensor. ● Almost unaffected by indoor wind, sound, and temperature changes. ● Self-diagnostic function to determine abnormalities in the sensor itself. ● High-density area arranged in 4 rows with 6 detection patterns per row.
Infrared sensor for visitor counter PLC-6SR
■Features ●Embedded infrared sensor for visitor counters (real-time output type) ●Compact and slim sensor head allows for installation in minimal space. ●Ultra-compact controller ●Detection distance can reach up to 6m. (With optional item BS-10N, it can reach up to 10m.)
This is a product set that includes the phase difference distance sensor [DX-S35F] and a storage attachment.
■Main Unit (DX-S35F) ●Detects objects through direct reflection using a phase difference method. ●Achieves a detection accuracy of 3m. ●Equipped with an anti-interference function. Up to 4 units can be connected. ●There is also a connection cable available in 5m specification "DX-S35F-Y5". *When used for a visitor counter, please use it with a single optical axis setting. Storage Attachment ●Can be mounted not only on walls but also on poles.
This is a product set that includes the phase difference distance sensor [DX-7AH] and a storage attachment.
For more details, please refer to the basic information.
Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage bases, gas holders, and chemical factories.
This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof construction and pressure-resistant explosion-proof construction. ■ High-performance explosion-proof sensor with a wide range of applications This product is an explosion-proof infrared sensor that complies with the "Explosion Protection Guidelines for Factory Electrical Equipment (Gas and Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, accommodating most explosive gases. ■ Dual Modulation Method By adopting our unique dual modulation method for the infrared beam, it enhances the distinguishability from stray light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■ Two Types: "L" Type and "H" Type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with Light Sensitivity Indicator The light sensitivity indicator allows for easy adjustment of the optical axis.
Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage facilities, gas holders, and chemical factories.
This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof construction and pressure-resistant explosion-proof construction. ■ High-performance explosion-proof sensor with a wide application range This product is an explosion-proof infrared sensor that complies with the "Explosion Protection Guidelines for Factory Electrical Equipment (Gas and Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition degrees G1 to G4, making it compatible with most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.
Sensor for activating the sheet shutter with only necessary functions at a mounting height of 3.2m.
■32 detection spots can be set The sensor has 32 detection spots, which can be cleared by row. ■Stationary object detection time setting Settings of ∞ seconds, 60 seconds, 10 seconds, and 2 seconds are possible. The configurable rows are 1 and 2. Rows 3 and 4 are fixed at 2 seconds. ■Area adjustment The depth area setting can be configured via dip switches for 4 rows, 3 rows, 2 rows, or 1 row. The width area setting can be configured for the left and right sides using area masks. ■Environmental settings It is possible to reduce false triggering caused by snow, rain, insects, and vibrations at the installation point during shutter opening and closing. There are four levels: Normal, Level 1, Level 2, and Level 3. ■Interference settings If there is a risk of interference between nearby sensors, it is possible to configure the sensors to have different settings.
High-altitude installation type (recommended height 3m to 6m) capable of covering large doors, achieving a high-density detection pattern (4 rows/24 beams).
■High-altitude installation type capable of long-distance detection With a maximum installation height of 6m, it can detect over long distances, making it ideal as a sensor for large factory doors and sheet shutters. (Recommended installation height: 3m to 6m) ■Arrangement of high-density detection patterns An area of four rows in depth, including right in front of the door, has been arranged, with each row having six zones, ensuring that intruders from the side of the door and people standing near the door rail are reliably detected. ■Microcontroller-based control system ●Limited stationary detection Can be set arbitrarily from "2 seconds / 15 seconds / 60 seconds / 180 seconds." ●Interference prevention function Even if multiple sensors are installed in narrow areas such as airlocks, the infrared frequency can be switched, preventing mutual interference. ■Outdoor installation capable Achieves IP55 waterproofing suitable for outdoor use. ■Adjustable to any angle With a swivel mechanism, angle adjustments can be made freely, allowing for the optimal detection area to be set. Additionally, the optical area can be switched to three patterns based on the installation location using dip switch settings.
High-performance sensor capable of direction detection with a single unit using microwaves.
■Direction Detection Function ● It is an optimal direction detection sensor using microwaves for activating vehicle exit warning lights. ● It is also capable of detecting the direction of pedestrians, so it can be used for applications such as detecting only entrants and activating camera recording. ■Convenient One-Sided Wiring ● By installing just one unit on one side, it allows for direction detection of vehicles, making it highly efficient for installation. ■Rainproof Structure ● It has a rainproof structure, allowing it to be used outdoors as is. (Sealant is required for the wiring hole) * There may be malfunctions during heavy rainfall. * It is recommended for use in environments where vehicles pass through in a straight line. * If there is a tendency for vehicles to approach the sensor from a distance, false detection may occur.
Combination sensor of microwave and infrared! Equipped with direction detection function.
■Output Assurance It is equipped with outputs from both microwave and infrared sensors, making it suitable for various applications. "Output 1 is a relay output" and "Output 2 is an open collector output." ■Features of Microwave It is less affected by snow and rain, allowing for use in outdoor locations. ■Mode Switching Function The comprehensive output (Output 1) can switch modes. 1) Microwave or Infrared 2) Microwave only *The output from the infrared sensor can operate independently (Output 2). ■Direction Discrimination Function It can detect movement towards the sensor while non-detecting movement away from the sensor. ■Infrared Area There are 32 detection spots: 12 (1st row) + 12 (2nd row) + 8 (3rd row). (Depth 1.25m × Width 3.2m at 3.2m) ■Microwave Area It secures a wide area of 2.5m × 4.0m at 2.2m.
A lightweight, compact wired leak sensor with a buzzer that is easy to alert at the installation site.
■Features ● Equipped with a buzzer, so even if multiple units are connected to the same channel of the controller or display panel, you can determine which sensor is detecting by the buzzer sound when you approach the site. ● Lightweight and compact, suitable for various installation locations, and comes with a fixer that makes it easy to secure to the installation surface. ● Detects water leaks using two electrodes located at the bottom of the case, and notifies you through the illumination of the detection indicator light, contact output, and buzzer sound. ● Capable of centralized monitoring for multiple units installed together. ● With a waterproof structure suitable for everyday use (equivalent to IP67), it will not malfunction even if submerged in water. ● Comes with height adjustment screws for stable installation according to the installation location. * Please note that water with extremely low impurities, such as pure water or ultra-pure water, cannot be detected.
A three-dimensional detection sensor ideal for detecting remaining occupants and ensuring safety in multi-story parking lots.
■Catching far-infrared energy emitted by humans The passive sensor (PA-5312PA) detects the difference between far-infrared energy emitted from objects such as walls and floors and that emitted from the human body with high sensitivity, outputting a signal. It is an ideal three-dimensional detection sensor for detecting residual individuals and ensuring safety in tower parking systems and similar applications. ■New fuzzy processing adopted For the first time in the world, fuzzy theory has been applied to passive sensors. The two outputs from the newly developed dual twin elements are processed by the CPU to separate the temperature difference and shape difference between the detected object and the background, allowing for accurate determination of whether the detected object is a human using fuzzy theory. It is hardly affected by phenomena that are likely to cause false triggers, such as small animals (like mice and cats), stray light, drafts, and external noise. ■High-density detection area Utilizing unique optical technology, a multi-parabola mirror has been adopted. This achieves an ideal detection area and allows for high-density detection in three-dimensional space. Additionally, it is compatible for installation on ceilings and walls.
It is a detection sensor that allows for the differentiation between passing detection and vehicle presence detection within a detection range of 1.0m to 3.5m.
■Pass Detection and Vehicle Detection Function Settings can be configured using a dip switch. When using the pass detection setting, it is possible to install it in close proximity by wiring a synchronization line, and it can also be used as a direction-detection sensor. ■Long-Distance Monitoring Capability Thanks to a unique mechanical design, the ultrasonic transmission and reception horn has been made directional, allowing for long-distance monitoring up to a ceiling height of 3.5m. (Adjustable volume available) ■Proximity Ignore Switch Setting Sensitivity to reflective objects within 1m of the horn can be reduced. ■Not Affected by Floor Surface Detection distance can be changed arbitrarily, so it is not affected by the floor surface. ■New Design A horn type that allows for the setting of any detection area has been adopted. (Area adjustment angle: within ±5° relative to the floor surface)
The sensor is optimal for detecting human passage and residual presence at CD/ATM corners, while not detecting cleaning robots or small animals passing through the area.
■Detection of completely stationary human bodies is possible Since it measures distance, it can detect stationary human bodies and objects within the monitored area. ■Adoption of near-infrared method Because it uses near-infrared technology, it is hardly affected by drafts, noise, or vibrations. ■Automatic measurement of height to the floor Unlike conventional near-infrared reflection methods, it measures distance rather than the amount of infrared reflection. Therefore, it can achieve stable detection without being influenced by a person's posture or clothing color. Additionally, it has a non-detection zone from the floor to the detection height, preventing false detections from cleaning robots, small animals, trash, or slippers moving within the monitored area. ■Mutual interference prevention function Equipped with a mutual interference prevention function, it allows for adjacent installation in narrow spaces (up to 8 units). ■User-friendly design ● Built-in alarm indicator light (red LED) for convenient operation confirmation. ● Built-in adjustment switch to change detection height according to the installation environment. ● Ceiling installation is possible using an optional embedded attachment (BU-900) (the protrusion from the ceiling when embedded is 8mm). ● Wall-mounted attachments (BL-5000, BCW-401) for installation on walls are also available as options.
We will inform you about individuals wandering near the bedside or room exit.
■Detects weight pressure on the mat ■The mat sensor is placed beside the bed or at the entrance of the room to detect the weight of a person when they get off (or fall from) the bed, or when they approach the door to exit the room. ■Four sizes to suit your needs ■We offer five different sizes, including the basic M-38 and the M-4512, which covers a wider area beside the bed. ■User-friendly design ●It is a high-sensitivity, thin type with a thickness of 6mm, made from flexible material. When combined with various receivers and displays, it alerts caregivers through alarms or indicator lights. ●The surface is designed to be flat to prevent tripping for those who wander. ●The underside uses non-slip material to prevent slipping on the floor. ●It is waterproof for everyday use. Disinfection and cleaning are possible (excluding the pin plug). ●It comes with a 3m cord and pin plug. ●The cord incorporates Kevlar fibers, making it resistant to strong pulling and tearing. ●The lead wire extraction area is bush-processed to withstand strong pulling. ●The pin plug is gold-plated for excellent corrosion resistance.
