1～13 item / All 13 items
Introducing the torque sensor. It is a rotary torque sensor. It is an amplifier-integrated torque sensor. The output is ±5V.
Introducing the built-in amplifier torque sensor. This is a torque sensor made by the German company Lorenz. The accuracy is ± 0.25% FS (full scale). When torque is applied in a clockwise direction, it outputs a positive signal.
This is an introduction to a displacement sensor. A wire is wrapped around a potentiometer. It is a wire-type displacement sensor.
A wire is wound around the potentiometer. It is a sensor that can measure the distance of movement as the wire is pulled out. Due to the grooved drum, it has excellent reproducibility.
微少力センサー（微少力ロードセル）です。ビーム型ロードセルです。微少な力や変位を測定。
微少力ロードセル（微少力センサー）です。ビーム型ロードセルです。 力や変位を測定 ・定格容量 :113 gf ～ 18 Kgf ・横幅: 6.4mm 熱的に整合した完全にアクティブなフルブリッジ ゲージにより、最適な温度をトラッキング。 頻繁な低負荷測定が必要な場合は、LCLシリーズ細型ビームロードセルが最適です。LCLシリーズは、医療機器、家電製品、プロセス制御、ロボット、自動車、その他の頻繁な使用における多くの異なる変数を測定するために設計されています。特別に開発された一体型抵抗器ひずみゲージは、バランス、補償、導電それぞれの素子を含み、ビーム状の薄板構造により、優れた安定性と信頼性を誇ります。
Flow Sensor Turbine Type for Liquids Flow Sensor FPR200 Series 4-20mA, Pulse Output or Relay Output
Flow Sensor Turbine Type for Liquids Flow Sensor FPR200 Series Liquid Flow Transmitter 4-20mA, Pulse Output or Relay Output - 2% FS Accuracy - 1.9 to 189.3 LPM Range - Visual Display of Flow Pulses - 4-20mA, Pulse or Relay Output The FPR-200 series flow sensor integrates a precise digital-analog conversion circuit, encapsulated and sealed within the body of the flow sensor, with robust tangential turbine technology. This flow sensor is suitable for flow rate measurement in cooling circuit HVAC systems and batch operations.
It is a super small pressure sensor. It is lightweight and compact.
Ultra-compact pressure sensor PST863 - Weight approximately 3 grams (excluding cable) - Case diameter 8.6 mm, HEX. 10 mm - Operating temperature -40 to +125 ℃ - 0.5 – 4.5 V voltage output - Pressure range 0 – 5 to 0 - 250 bar - M5×0.8 male thread pressure port - Stainless steel construction
The inductive position sensor LVIT is a contactless operating sensor. It features a low cost, robust structure, and an excellent stroke-to-length ratio.
The inductive position sensor LVIT is a contactless operation sensor. It features a low cost, robust structure, and an excellent stroke-to-length ratio. Measurement range: 25 to 200 mm Output: 10 V or 4-20 mA LDI-119 series: Compact type with a housing diameter of 11 mm LDI-127 series: Particularly robust type with a housing diameter of 27 mm
Small Pressure Sensor PX119 Series - Low cost, compact size, 0.50% BFSL accuracy, completely stainless steel body.
Small Pressure Sensor PX119 Series Pressure Sensor Details: - Low cost - Compact size - 0.50% BFSL accuracy - Fully stainless steel body The PX119 pressure sensor (pressure transducer) is ideal for material handling, industrial equipment, and portable device applications where a small instrument is required. The pressure sensor body is machined from a single piece of stainless steel, providing stronger protection for the internal electronic components. In addition to a piezoresistive ceramic sensor, it features ASIC signal conditioning for excellent temperature compensated output.
The FLR1000 series turbine flow meter is used to measure very low flow rates from 20 mL/min to 5 L/min.
Turbine Flow Meter Low Flow FLR1000 Series Flow Sensor - PPS or brass construction - Accuracy 1% (for liquids) - Reproducibility up to 0.2% - Analog output 0-5V - Optional display The FLR1000 series flow meter is used to measure very low flow rates from 20 mL/min to 5 L/min. It is suitable for a variety of industrial, commercial, and research flow measurement applications. The FLR1000 series flow meter operates on a 12 Vdc power supply and is designed to be combined with a data acquisition system that supplies 12.5 Vdc to the flow meter and receives a linear signal of 0-5 Vdc. This flow meter offers high cost performance, making it a potential replacement for traditional glass tube and ball flow meters in applications requiring an electrical signal proportional to flow.
Flow sensor (for liquids) RFO series, pulse output for liquid flow and visual confirmation, 4.5 to 24 Vdc pulse output. Manufactured by Gems.
The flow sensor features a liquid rotor with an outer wheel design, where the rotor and electronics can be visually inspected and are packaged within a compact, panel-mountable housing. It provides an accurate flow rate as an electrical output, allows for visual confirmation of flow, and is economical. Typical flow sensor applications include: - Water purification and water distribution systems - Chemical dosing devices and semiconductor processing equipment - Testing of water injection systems and water delivery systems - Ensuring appropriate processing, mixing, and distribution operations in laser and welding equipment, coolers, and heat exchangers. Signal output: The voltage output of the flow sensor RFO type is an on/off pulse of the DC voltage supplied to the unit. The input voltage range is from 4.5 to 24Vdc, making it easily compatible with digital logic circuits. The frequency of the output pulse is proportional to the flow rate, ranging from approximately 15Hz at low flow to about 225Hz at high flow.
Introducing the ultra-high temperature pressure sensor (up to 250°C). It is a compact and lightweight pressure sensor.
Small Pressure Sensor - High-Temperature Pressure Sensor PET160 Series High-Temperature Pressure Sensor Compensation Temperature +20℃ to +250℃ Ultra-Compact Pressure Sensor Voltage Output Pressure Sensor Pressure Sensor with Remote Amplifier up to 85℃ (Voltage Output Type) PET161: 1-2 mV/V Output (10 Vdc Power Supply) PET163: 0.5-4.5 Vdc Output (5 Vdc Power Supply) PET164: 0-5 Vdc Output (8-30 Vdc Power Supply) PET167: 0.5-4.5 Vdc Output (8-16 Vdc Power Supply)
Ultra-small pressure sensor PHE863/PHE867 series for harsh environments; weight approximately 3 grams (excluding cable).
Ultra-compact Pressure Sensor PHE863/PHE867 Series The PHE860 series is designed to operate in the most extreme environments, including a wide operating temperature range, mechanical shock, and vibration. It is suitable for embedded measurements in vehicles, aircraft, satellites, robots, missiles, or test benches for equipment with limited space and mass. - Weight: Approximately 3 grams (excluding cable) - Case outer diameter: 8.6 mm, HEX. 10 mm - Voltage output: 0.5 – 4.5 V - Operating temperature: -40 to +140 ℃ - Pressure port: M5×0.8 male thread - Pressure range: 0 – 5 to 0 - 250 bar PHE 863: Supply voltage: +5Vdc PHE 867: Supply voltage: 8–16Vdc Operating temperature: -40℃ to +140℃ Compensated temperature: -40℃ to +125℃, -40℃ to +140℃ Output: 0.5–4.5V - Robotics - Automotive - Aircraft - Motorsports - Experiments and Research
Flange type reaction torque sensor 0-10 to 0-20,000 N·m torque sensor DF-30 non-rotating with through hole.
Flange Type Reaction Torque Sensor Reaction Torque 0-10 to 0-20,000 N·m Non-rotating With through hole High torsional rigidity Accuracy: 0.1% FS Performance Features - Torque measuring flange for torque measurement - Reaction or twist measurement - Flange flange solution - Short shaft length - Easy handling and assembly Applications - Process measurement and control technology - Fully automatic machining centers - Measurement and control devices - Tool engineering - Special mechanical engineering
The case and pressure-receiving part made of highly corrosion-resistant stainless steel (SUS316L) are integrated, which shuts out the intrusion of water and gas.
Hot Spring Water Level Sensor OGI Series The case and pressure receiving part are integrated and made of highly corrosion-resistant stainless steel (SUS316L), which shuts out the intrusion of water and gas. - Compact size: Φ23mm, approximately 200mm in length It can also be used by placing it in a measuring tube. - Operating temperature range: 0 to 80℃ - Optional electrolysis countermeasures - 2-wire type, 4-20mA - Shielded gauge type - Built-in lightning protection function
