Sensors×セキュリティハウス - List of Manufacturers, Suppliers, Companies and Products

Sensors Product List

76～90 item / All 164 items

Displayed results
Infrared Sensor PB-IN-200HFC

Infrared Sensor PB-IN-200HFC

Infrared Sensor PB-IN-200HFC

■4-Stage Power Beam Adopts a 4-stage beam simultaneous cutoff method to prevent malfunctions caused by small animals. It features a high-power beam with a distance margin of 10 times. ■Modulation Frequency Switching Function The modulation frequency can be switched in four stages, preventing infrared wraparound and mutual interference. ■Light Emission Power Switching Function The light emission power can be switched in two stages, allowing for efficient settings according to the warning distance. ■Auto Gain Lock Function Within the maximum warning distance, it automatically sets the optimal sensitivity margin for any warning distance. ■External Environment Diagnosis Function If the light reception level decreases due to changes in weather such as dense fog, heavy rain, or snowfall, it will notify you through environmental output. ■Programmable AGC Function Automatically increases light reception sensitivity during bad weather such as dense fog, heavy rain, or frost to prevent malfunctions. ■Alarm Memory Display Function Easily check the sensors that have triggered an alarm. You can choose between auto-reset and manual reset options. ■Sound Check Function Allows for adjustments and confirmations through sound during light axis adjustment, operation checks after installation, alarm memory display, and gain lock confirmation.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Light-type active sensor SHA-6502

Light-type active sensor SHA-6502

This single unit is sufficient for a 6m square sheet shutter! (Can be installed up to 6.5m)

■Wide-area and high-density detection patterns Five-column areas, including just before the shutter, have been arranged, with each column featuring 12 high-density pattern areas (a total of 60). The installation height can be up to 6.5 meters, achieving a wide detection area. (Optical area: height 6.5m × width 6.9m × depth 4.2m) ■Direction discrimination function By setting the direction discrimination function, unnecessary opening and closing of the shutter can be reduced. The directionality can be selected from the following four patterns: 1. All-direction detection 2. No detection of lateral entry 3. No detection of exit from the shutter side 4. No detection of exit from both lateral and shutter sides ■Malfunction reduction function By using the new insect mode in conjunction with environmental countermeasures, malfunctions caused by environmental changes such as dirt on the ground, snow, and insects can be reduced. ■Shutterway function By using the separately sold wedge-shaped base (model number WD-6500), a detection area setting for the shutterway (negative side) can be established, enhancing safety.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Light-type active sensor Near-infrared reflection method DA-1300

Light-type active sensor Near-infrared reflection method DA-1300

A new ceiling sensor design that does not compromise aesthetics, achieving a flat integration through a pull-down method.

■High-density infrared area The detection area achieves a high-density wide area with 72 spots. ■Adjustable area Both the stepping and wide areas can be erased one row at a time, allowing for optimal fine area adjustments. ■Mode switching function The eco mode function reduces unnecessary opening time of automatic doors. ■Operation confirmation function The use of full-color LEDs makes operation confirmation easy. ■Easy installation The industry's first pull-down method achieves a flat, integrated design that preserves the aesthetics of the ceiling. A flattening of approximately 10mm compared to conventional products has been realized.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Light-type active sensor DA-3902

Light-type active sensor DA-3902

New design that reduces protrusion during installation without a target.

■Achieves a maximum installation height of 4m without a target Even with a high door of 4.0m, it can provide a spacious entrance while maintaining safety with the doorway monitoring function. It is also suitable for entrances of industrial facilities. ■Industry-leading 60 spots Maintaining a high-density area of 60 spots at installation heights from 2.0m to 4.0m reduces the risk of contact with doors during rushing into the entrance or diagonal entry. ■Equipped with ECO mode function! It can reduce unnecessary opening time of automatic doors. ■Easy operation confirmation with 7-color LED In detection range confirmation mode, the color of the displayed LED changes for each detection row, allowing for area measurement and identification of malfunctioning rows. During monitoring, the presence or absence of snow and insect mode settings can be identified by color. ■Improved area fine-tuning function Adjustment of width and depth by one row each is now possible, allowing for precise detection areas tailored to the site while maintaining high density.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared sensor for visitor counter PLC-5B2

Infrared sensor for visitor counter PLC-5B2

This is an infrared sensor for the visitor counter.

■Features ● Infrared sensor for customer counters with a detection range of 5m (real-time output). ● It is a reflective sensor with an integrated light-emitting and light-receiving unit, allowing for wiring work only on the main unit side, which enhances maintainability. ● It uses a retroreflector, allowing for an incident angle of infrared rays of up to 30° (±15°). ● Compatible with all of our customer counter products.

  • Entrance/exit management and personal identification system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multi-beam phase difference detection distance sensor DX-S35F

Multi-beam phase difference detection distance sensor DX-S35F

Distance measurement is performed using a phase difference method that detects the time difference between incident light and reflected light. Achieving 3m with high detection accuracy.

■Features ● Detects objects through direct reflection using a phase difference method. ● Achieves a detection accuracy of 3m. ● Equipped with an anti-interference function. Up to 4 units can be connected. ● There is also a 5m connection cable model "DX-S35F-Y5". *When used at a visitor counter, please set it to a single optical axis.

  • Entrance/exit management and personal identification system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Light-type active sensor <Near-infrared reflection method> DA-3600

Light-type active sensor <Near-infrared reflection method> DA-3600

Maximum installation height of 3.6m with ECO function. Settings are made via smartphone or tablet.

■72 detection spots can be set The sensor can be configured with 72 detection spots divided into four groups, and one detection spot can be changed to a non-detection area. In the four groups, sensitivity settings, hold time settings, output time settings, and noise environment settings can be configured individually. *Settings are done using a smartphone or tablet. ■Function settings can be done via smartphone Various settings for functions and sensors are performed using Wi-Fi communication on a smartphone or tablet with Android 2.2 or higher installed. (Please download the dedicated app from our website.) This allows for safer operations at heights, as only the installation of the equipment is required. (A separate setting unit DSY is needed for configuration.) ■Eco function Detection is not activated in the horizontal direction, while detection occurs in the direction towards the sensor, and the output time is shortened in the direction away from the sensor, reducing unnecessary openings and closings. ■Output settings Output can switch between contact a and contact b, and in the case of contact b, it operates in fail-safe mode (open during power failure).

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Light-type active sensor DA-4000

Light-type active sensor DA-4000

The optical area can individually set 72 spots for detection and non-detection.

■72 optical spots can be set You can set detection and non-detection for 72 optical spots on a per-spot basis, allowing for area security settings tailored to the site. Additionally, detection spots can be divided into four groups, each with adjustable sensitivity and output time settings. ■Settings via dedicated software The settings for the main unit are performed by connecting to an optional setting unit DSY (sold separately) and a device such as a smartphone or tablet running Android 2.2 or higher with a dedicated app installed via Wi-Fi. The detection status can be viewed in real-time, ensuring accurate area settings. There is also no need to work at heights. (Please download the dedicated software from our website.) ■Interference prevention function With four interference prevention modes, the same sensor can be installed in close proximity without malfunctioning. ■Environmental settings Environmental settings can be adjusted in four stages, which helps reduce false detections from snow, insects, and other factors.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor MS-100(BL)

Outdoor/Indoor Passive Sensor MS-100(BL)

Indoor and outdoor motion sensor switch. Select from four detection patterns in a variable multi-area!

■Adoption of Variable Multi-Area By combining variable multi-area with extensive adjustment functions, it allows for the selection of various installation locations and four types of detection patterns with a single unit. ■As a switch for lighting and surveillance cameras It can be used for turning indoor and outdoor lighting on and off as an energy-saving and convenient lighting solution, and simultaneously serves as a switch for activating surveillance cameras. 【No-voltage relay contact output (a contact) + no-voltage relay contact output (a contact/b contact switching)】 ■All-weather switch With a rainproof structure, it can be installed not only indoors but also outdoors and semi-outdoors. Additionally, it can be mounted on ceilings, walls, poles, etc., allowing for flexible installation locations. *The rainproof structure is only applicable when mounted vertically: equivalent to IP43. When mounted horizontally, it is not rainproof.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof infrared sensor PXH-100EXL

Explosion-proof infrared sensor PXH-100EXL

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage facilities, gas holders, and chemical factories.

■This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof structure and pressure-resistant explosion-proof structure. ■High-performance explosion-proof sensor with a wide range of applications This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas and Vapor Explosion Protection 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, accommodating most explosive gases. ■Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof infrared sensor PXH-100EXH

Explosion-proof infrared sensor PXH-100EXH

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage facilities, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof structure and pressure-resistant explosion-proof structure. ■ High-performance explosion-proof sensor with a wide range of applications This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, accommodating explosion grades 1 to 2 and ignition grades G1 to G4, thus covering most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, enabling multi-stage surveillance and long-distance linear span surveillance. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof infrared sensor PXH-200EXH

Explosion-proof infrared sensor PXH-200EXH

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage facilities, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof structure and pressure-resistant explosion-proof structure. ■ High-performance explosion-proof sensor with a wide range of applications This product is an explosion-proof infrared sensor that complies with the "Explosion Protection Guidelines for Factory Electrical Equipment (Gas and Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, and is compatible with most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof infrared sensor PXH-400EXL

Explosion-proof infrared sensor PXH-400EXL

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage bases, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof construction and pressure-resistant explosion-proof construction. ■ High-performance explosion-proof sensor with a wide application range This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, making it compatible with most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between external light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Covert Video Recording Signal Detection Sensor VTS-100

Covert Video Recording Signal Detection Sensor VTS-100

Detects transmission signals (video signals) from wireless surveillance cameras (wireless cameras) and can be used for a wide range of applications such as security and crime prevention.

■Detection Detects the video signals from hidden cameras (wireless) installed in places such as ATMs of financial institutions, changing rooms, locker rooms, hotel guest rooms, hot spring facilities, toilets, and residential areas like apartments and houses. ■Alarm Output Since the video signals are constantly monitored, an alarm will be triggered a few minutes after a wireless camera (hidden camera) is installed. ■Stable Monitoring By monitoring only the video signals, it is less affected by external factors from the installation environment, allowing for stable monitoring. Additionally, the detection judgment uses a counting method, further increasing reliability. ■Flexible Combination As a video signal detection sensor, it can be combined with various security systems.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vehicle Count Sensor CCS2

Vehicle Count Sensor CCS2

It is a vehicle counting sensor that utilizes infrared reflection method.

■Features ● Ceiling-mounted type that allows bidirectional counting with a single unit. ● High recognition rate (over 99%) ensures reliable detection even during traffic jams. ● Does not detect pedestrians or small animals. ● Capable of detecting speeds up to 40 km/h. ● Achieved integration with the controller in a size of 47 cm wide. ● Easy installation with a bracket-type railway mounting. ● Settings are made using a dedicated remote control (sold separately).

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Sensors

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.