Sensors×セキュリティハウス - List of Manufacturers, Suppliers, Companies and Products

Sensors Product List

151～164 item / All 164 items

Displayed results
Combination Sensor COM-50XTL

Combination Sensor COM-50XTL

A composite sensor that integrates infrared (dual beam opposing type) and microwave (opposing type).

■Strong against harsh environments (Composite sensor) The composite type integrates a dual-beam infrared sensor and a 24GHz microwave sensor, reducing malfunctions during adverse weather conditions such as fog, snow, and heavy rain. *The 24GHz microwave sensor complies with the domestic radio law as a "specific low-power radio station, wireless equipment for mobile detection sensors," so no application for a radio station license or any other procedures are required on the customer's side. ■Strong against lightning (Enhanced lightning protection) Surge resistance has been strengthened to reduce damage caused by induced lightning. *This does not guarantee protection against failures or malfunctions due to lightning strikes. ■Two models: "L" type and "H" type The microwave section has two frequency types: "L" type and "H" type. This prevents mutual interference when multiple units are installed directly on the line. *The infrared section can switch between four modulation frequencies using the function setting switch. ■Strong against stray light (Dual modulation method) By adopting our unique dual modulation method in the infrared sensor, we enhance the ability to distinguish between stray light (such as sunlight and car headlights).

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Combination Sensor COM-IN-100AL

Combination Sensor COM-IN-100AL

Intelligent sensor that integrates infrared (4-beam opposing type) and microwave (opposing type).

■High-reliability composite sensor This is a composite sensor that integrates a four-beam infrared sensor and a 24GHz microwave sensor, achieving high reliability even in bad weather conditions. ■Two models: "L" type and "H" type There are two models for the microwave section: "L" type and "H" type. The infrared section can switch between four modulation frequencies via a switch, preventing mutual interference when multiple units are installed in a straight line. ■No need for radio station license application This product falls under the category of "specific low-power radio stations, wireless equipment for mobile detection sensors" permitted by domestic radio law, so no application or procedures for a radio station license are required from the customer. *The first domestic security-oriented opposing microwave sensor. ■Intelligent features ●Four-stage modulation frequency switching This feature is effective when conducting linear surveillance with multiple sensors or during multi-stage alerts. By switching the frequency of the infrared pulse beam, mutual interference can be easily avoided. ●External environment diagnosis function If the infrared light reception amount falls below a certain level due to bad weather (dense fog, heavy snowfall), it will output an environmental deterioration signal.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Glass Break Sensor GS-2000

Glass Break Sensor GS-2000

Sharp detection performance! Slim-shaped ultrasonic glass break sensor.

■Features This is an ultrasonic sensor that detects the unique ultrasonic waves generated when plate glass, such as windows, is broken, and outputs an alarm signal. It is designed specifically for unmanned surveillance. ■Reliable Glass Break Detection It sharply picks up the unique ultrasonic waves generated during glass breakage and accurately processes the signals according to frequency and sound pressure, shutting out external noise. ■Environmental Check Function It is equipped with a mode switch and indicator light that make it easy to check the installation environment and confirm operation. ■Easy Installation and Versatile Placement ● The surveillance area can be adjusted with a maximum vertical range of 8m and a maximum horizontal range of 7m, with a wide variable range of 30°, allowing for easy installation on the ceiling. Additionally, it can monitor multiple pieces of plate glass with a single unit, making installation and maintenance easy without compromising aesthetics. ● Being passive, multiple units can be installed in the same space. ● Its slim design allows it to be installed in narrow spaces between windows and curtains or blinds.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor FS-5010A(B)

Flame Sensor FS-5010A(B)

Instantly catch flames 30 meters ahead! A revolutionary UV detection flame sensor that can be installed outdoors.

■Two power types available in the lineup We offer two types of power supplies: DC 10-30V and AC 100V. You can select the model according to your application and installation location. ■Eight levels of sensitivity adjustment to cancel sources of false activation To account for all potential sources of false activation, we have established two levels of sensitivity settings (High and Low) and four levels of detection timer settings (1 second, 3 seconds, 6 seconds, and 15 seconds) to achieve optimal detection sensitivity for outdoor use. A total of eight detection conditions allow for settings tailored to the environment. Additionally, you can use the included area mask seal to eliminate unnecessary detection areas. ■Body design that matches any installation location The smart-looking housing-integrated body fits various installation locations. Thanks to our unique ball-lock mechanism, you can easily adjust the detection area after installation. ■Equipped with ultraviolet environment check function The ultraviolet environment at the installation site is monitored by a display light. This allows you to check surrounding ultraviolet sources (causes of false activation) and makes it easy to verify during sensitivity settings or when experiencing unstable operation.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor FS-5010A(W)

Flame Sensor FS-5010A(W)

Instantly catch flames 30 meters ahead! A revolutionary UV detection flame sensor that can be installed outdoors.

■Two types of power supply available in the lineup We offer two types of power supplies: DC 10-30V and AC 100V. You can select the model according to your application and installation location. ■Cancel false triggers with 8 levels of sensitivity adjustment To account for all potential sources of false triggers, we have established sensitivity settings with 2 levels (High and Low) and detection timer settings with 4 levels (1 second, 3 seconds, 6 seconds, and 15 seconds) to achieve optimal detection sensitivity for outdoor use. A total of 8 detection conditions allow for settings tailored to the environment. Additionally, you can use the included area mask seal to eliminate unnecessary detection areas. ■Body design that matches any installation location The smart-looking housing-integrated body fits various installation locations. Thanks to our unique ball-lock mechanism, you can easily adjust the detection area after installation. ■Equipped with ultraviolet environment check function The ultraviolet environment at the installation location is monitored by a display light. This allows you to check surrounding ultraviolet sources (causes of false triggers), making it easy to verify during sensitivity settings or when experiencing unstable operation.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor FS-5010(B)

Flame Sensor FS-5010(B)

Instantly catch flames 30 meters ahead! A revolutionary ultraviolet detection flame sensor that can be installed outdoors.

■Two types of power supply available in the lineup We offer two types of power supplies: DC 10-30V and AC 100V. You can select the model according to your application and installation location. ■Eight levels of sensitivity adjustment to cancel false triggers To account for all potential causes of false triggering, we have established two levels of sensitivity settings (High and Low) and four levels of detection timer settings (1 second, 3 seconds, 6 seconds, and 15 seconds) to achieve optimal detection sensitivity for outdoor use. A total of eight detection conditions allow for settings tailored to the environment. Additionally, you can use the included area mask seal to eliminate unnecessary detection areas. ■Body design that matches any installation location The smart-looking housing-integrated body matches various installation locations. Thanks to our unique ball-lock mechanism, you can easily adjust the detection area after installation. ■Equipped with ultraviolet environment check function The ultraviolet environment at the installation site is monitored by a display light. This allows you to check surrounding ultraviolet sources (causes of false triggering) and makes it easy to confirm during sensitivity settings or when operation is unstable.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor (Multilingual Message Type) FS-7000

Flame Sensor (Multilingual Message Type) FS-7000

It is a flame sensor with built-in messages in five languages. It is battery-operated and has a rainproof structure, making it possible to implement arson prevention even in outdoor locations without a power source!

■Can be installed outdoors and is battery-operated ●It can be installed outdoors with a rainproof structure (equivalent to IP33), and can deliver messages and alarm sounds with clearer sound quality than integrated speakers. ●Since it is battery-operated, it can be used in various locations, including places without power. ■Equipped with messages in five languages for no smoking and fire prohibition ●Equipped with messages in five languages: Japanese, English, Chinese, Korean, and Spanish. ●Messages can be selected from "No Smoking Notification" and "Fire Prohibition Notification," and alarm sounds can also be set. ●Adopts a large speaker that delivers messages and alarm sounds with clear sound quality even outdoors. ●Volume can be adjusted for messages (0–95 dB) and alarm sounds (0–90 dB). ●Messages can be rewritten to custom messages (optional). ■Selection of necessary languages and the number of message activations is possible ●It is possible to select only the necessary language from Japanese, English, Chinese, Korean, and Spanish for activation. ●The number of message activations can be selected as either 1 time or 2 times.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Twin mirror type passive sensor, three-dimensional surveillance type, PA-6612W

Twin mirror type passive sensor, three-dimensional surveillance type, PA-6612W

It is a new type of passive sensor that significantly reduces the impact of small animals through a twin mirror system that forms a unique surveillance area.

■Wide Base Design By widening the base (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Twin Mirrors that Form a Unique Area This is a new type of passive sensor that incorporates two sets of optical units, each equipped with twin elements. The area formed by the two sets of optical units maintains an optimal positional relationship according to the detection distance, regardless of the set distance, significantly reducing false alarms caused by small animals. ■Micro-Motion Detection Function Equipped with a function that can sensitively detect even slight movements of a person. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm through the memory indicator light (yellow) blinking or lighting up during the alarm. ● The memory indicator light blinks for 3 minutes after the alarm, then continues to light up for 47 minutes before automatically turning off. ● This function can be disabled via the mode selector. ■Switchable Count Function Depending on the installation environment, the mode selector allows for optional settings of 1, 2, 3, or 4 counts.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Light-type active sensor (with touchless function) DA-TL100

Light-type active sensor (with touchless function) DA-TL100

The automatic door opens when you wave your hand. A touchless feature with a non-contact sensor!

■Equipped with Touchless Function By pinpointing the activation area of the sensor above the automatic door to the door plate, it can simulate the function of a touch switch. When you bring your hand close to the automatic door plate, the sensor detects it and opens the door, allowing you to open the door without contact (touchless). ■Reduce Malfunctions of Automatic Doors with Detailed Detection Area Settings Touchless detection area settings can be configured in four ways: central, left, right, with four spots each, totaling 12 spots. It is compatible with sliding doors and left/right single sliding doors. The door will not open when approached from the side, effectively reducing unnecessary opening and closing of the automatic door. ■Can Also Be Used as a Standard Non-Contact Sensor By switching the dip switch, it can also be used as a conventional non-contact activation sensor. ■Available Cover Colors The cover colors are available in five options: S Silver, B Bronze, W White, BL Black, and ST Stainless Steel.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wide Sensor ESN-T Series

Wide Sensor ESN-T Series

Significantly improved design and construction efficiency due to ultra-thin design and mutual interference prevention features.

■Wide Range of Surveillance Unlike conventional infrared sensors, the adoption of multi-beam technology allows for a wide range of surveillance. It is ideal for detecting residual individuals in CD and ATM corners. ■Mutual Interference Prevention Function With the built-in mutual interference prevention function, it is possible to connect and closely install two sensors, enhancing both usability and installation efficiency. ■Automatic Sensitivity Correction Function After adjusting the optical axis, simply turning the power OFF and ON (temporarily cutting off the power and then restoring it) sets the sensitivity to the optimal level for the installation distance and environment, thanks to the built-in automatic sensitivity correction function. ■Light Level Stability Indicator (Green LED) The indicator lights up when the light reception level exceeds 20% of the operational level, making it easy and reliable to adjust the optical axis during installation and maintenance. ■Ultra-Thin Size Achieving a thickness of 13mm and a width of 30mm, this ultra-thin design does not limit installation locations and does not create any discomfort after installation.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Human Motion Sensor HM-370

Human Motion Sensor HM-370

The area setting for the wandering notification system is optimal for detecting human movement in the life safety notification system. It is compact and does not make mechanical noise.

■Wandering Notification System (Determines the Area) Connects to the contact call receiver (CC-R or CC-WR). It determines the area to receive signals from the AND input sensor in areas where the radio signal is unclear. ■Safety Notification System (Detects Human Movement) This sensor is designed to ensure a safe and comfortable living environment in individual rooms, such as in senior housing. ■Main Features ● Compact and slim design. The white body and simple dome shape match well with healthcare facilities. ● The detection indicator uses a gentle green LED for a calming image. ● Employs a passive infrared method to reliably detect human movement. ● Comes with an M lens that allows the detection area to be changed between flat and three-dimensional shapes according to the installation location.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type for 12m PA-5312A

Passive Sensor 3D Surveillance Type for 12m PA-5312A

A passive sensor that adopts fuzzy theory and is equipped with abundant safety features and micro-motion detection capabilities.

■Adoption of Fuzzy Theory The two outputs from the dual twin sensor are processed by a newly developed CPU, separating the temperature difference information between the detection object and background, and the size information of the detection object. Using fuzzy theory, it makes a highly accurate judgment on whether the detection object is a human or a small animal, and outputs an alarm. ■Compact and High Performance A compact and soft design that matches well with interior decor. With a newly designed high-sensitivity dual twin sensor, optical system, and signal processing circuit, it has achieved an even higher density of the monitored area. ■Micro-Motion Detection Function By switching the mode selector, the dual twin sensor operates as two independent twin sensors. The number of sensitive zones doubles (from 18 pairs to 36 pairs), transforming it into a highly sensitive micro-motion detection sensor that can detect even slight movements of the human body or limbs. ■Abnormality Display Function Alarm Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during monitoring through the blinking or lighting of the memory display light (yellow). ■Abnormality Alarm Function It notifies of abnormalities through continuous alarm output and continuous lighting of the alarm display light.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor PIR-T35N(G)

Outdoor/Indoor Passive Sensor PIR-T35N(G)

A passive sensor for outdoor and indoor use that adopts a unique triple mirror system and signal processing method, significantly reducing missed detections and malfunctions.

■Triple mirror that forms a unique area Equipped with three sets of optical units in the sensor. This is a new type of passive sensor that features twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces false alarms and malfunctions due to its unique layout design. Additionally, the design resembles outdoor lighting, and the internal mirrors can be adjusted to modify the area, making it difficult to infer the direction of the area from its appearance, thus enhancing security. ■Reduction of false alarms caused by small animals By adopting independent detection units for each mirror, signal processing reduces false alarms caused by small animals such as cats. Furthermore, by installing a bird stopper on the top surface, it becomes difficult for birds to perch, significantly reducing unexpected false alarms. ■Supports installation heights of 2.0 to 6.0 meters! Since it can be installed at heights that are difficult for people to reach, it prevents vandalism against the sensor. Additionally, by using high-density mode, it can be installed at heights of up to 6 meters. (In high-density mode, cancellation of small animals is disabled.) ■High-density area using triple mirrors With a seamless high-density surveillance area, it enables comprehensive monitoring without gaps.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor PIR-T35N(W)

Outdoor/Indoor Passive Sensor PIR-T35N(W)

A passive sensor for outdoor and indoor use that adopts a unique triple mirror system and signal processing method, significantly reducing missed detections and malfunctions.

■Triple mirror that forms a unique area Equipped with three sets of optical units in the sensor. This is a new type of passive sensor featuring twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces missed alarms and false triggers due to its unique layout design. Additionally, the design resembles outdoor lighting, and the internal mirrors can be adjusted to modify the area, making it difficult to infer the direction of the area from its appearance, thus enhancing security. ■Reduction of false triggers caused by small animals By adopting independent detection units for each mirror, signal processing reduces false triggers caused by small animals such as cats. Furthermore, by installing a bird stopper on the top surface, it becomes difficult for birds to perch, significantly reducing unexpected false triggers. ■Compatible with installation heights of 2.0 to 6.0m! Since it can be installed at heights that are difficult for people to reach, it prevents vandalism against the sensor. Additionally, by using high-density mode, it can be installed at heights of up to 6m. (In high-density mode, cancellation of small animals is disabled.) ■High-density area using triple mirrors With a seamless high-density surveillance area, it enables comprehensive monitoring without gaps.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Sensors

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.