Screw×池田金属工業 - List of Manufacturers, Suppliers, Companies and Products

Screw Product List

1～5 item / All 5 items

Displayed results
Thermoplastic resin dedicated tapping screw "Nonsert(R)"

Thermoplastic resin dedicated tapping screw "Nonsert(R)"

It is difficult to apply load to the counterpart resin material! It can be reused repeatedly for the same hole.

"Nonsert(R)" is a tapping screw specifically designed for thermoplastic resin that does not require a metal insert. The metal insert, which was necessary for reinforcing the internal thread, is no longer needed, reducing labor costs. It can also prevent boss breakage in the mating material. The shaft is triangular in shape and has a sharp screw thread angle of 30° (normally 60°), allowing it to be screwed into the resin material with low torque. As a result, it is less likely to impose a load on the mating resin material, making it possible to reuse it repeatedly in the same hole. 【Features】 - No metal insert required, reusable - Shape that prevents boss breakage in the base material - High pull-out strength - Specifically for thermoplastic resin - Available in stainless steel and iron (various platings) *For more details, please refer to the related links or feel free to contact us.

  • Subsidiary materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super ultra low head screw "310 Slim"

Super ultra low head screw "310 Slim"

Flat fastening surface! Two types of recesses are used: "6-lobe" and "Quo," which provide good torque transmission.

The "310 Slim" is an ultra-low head screw with a head height of 0.5mm for M2 and 1mm for M5. It achieves a flat fastening surface without any protrusion of the screw head, eliminating the need for counterbore processing. It is recommended for applications where you want to eliminate screw head protrusion or reduce weight. The incomplete thread section below the neck is designed to be small, allowing for secure fastening without the screw head floating, even in thin sheet fastening. 【Features】 ■ Ultra-low head ■ No counterbore processing required to eliminate head protrusion ■ Can be tightened with the same torque as conventional small screws ■ The recess shape and depth are designed to enable fastening similar to cross-recess screws ■ Two types of recesses are adopted for good torque transmission: "6-lobe" and "Quo" *For more details, please refer to the related links or feel free to contact us.

  • Subsidiary materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super ultra-thin head screw "310 Slim"

Super ultra-thin head screw "310 Slim"

Optimal for space-saving and design enhancement! Ultra low-profile type.

The 310 Slim is an ultra-low head type screw that is ideal for space-saving measures and enhancing design aesthetics. Its thickness is only 0.5mm for M2 and just 0.9mm for M4, making it perfect as a cover screw. 【Features】 - Ultra-thin head type - Ideal for areas without clearance in machines and equipment - No protrusion of the head after installation on the product For more details, please contact us or download the catalog.

  • Subsidiary materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Anti-tamper screw "TRF"

Anti-tamper screw "TRF"

Simply replace the existing screws! A product with high design and security features.

The "TRF" is a tamper-proof screw used in terminal products that require safety measures such as the disassembly of public facilities and toys, accident prevention, theft prevention for equipment, and compliance with radio laws. By replacing existing screws, security is enhanced. Additionally, due to its aesthetic appeal, it is also appreciated for its design, and there are many situations where it is used as an accent for products. 【Features】 ■ Security is increased simply by replacing existing screws ■ Cannot be disassembled without a special tool ■ A variety of tamper-proof screws are in stock *For more details, please refer to the related links or feel free to contact us.

  • Steel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Screws with anti-loosening processing *Eliminates the hassle, unevenness, and forgetfulness of adhesive application work.

Screws with anti-loosening processing *Eliminates the hassle, unevenness, and forgetfulness of adhesive application work.

It is also possible to specify the application range, color, and viscosity of the locking agent! Since the locking agent is already applied to the threaded part, tightening work can be done as is.

The screw with a locking agent, "Seahorse Lock(R)," is a pre-coated type with a locking agent applied to the screw part, allowing for immediate tightening work as an adhesive-based locking product. It eliminates the hassle, inconsistencies, and forgetfulness of the application process, effectively preventing loosening due to impact and vibration. The locking agents can be broadly categorized into two types: "resistance" and "adhesion," with multiple variations available for each type, allowing for selection based on application needs. This product contributes to reducing the labor involved in the application process and streamlining operations. 【Features】 ■ Eliminates the hassle, inconsistencies, and forgetfulness of adhesive application ■ Customizable types, application ranges, viscosities, and colors of locking agents ■ Supports prototypes, small lots, and short delivery times ■ Specialized engineers are available to assist with specification selection and torque settings using testing equipment *For more details, please download the PDF or contact us directly.

  • Subsidiary materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Screw

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.