1～7 item / All 7 items
X-ray food test specimen SUS ball test specimen 5-piece set φ0.3 φ0.4 φ0.5 φ0.6 φ0.7 / Item number M36792SB5-01N
Test specimen for foreign object inspection using X-rays. 99.99% pure quartz can be continuously supplied as a stable material over a long period. This is the master standard specimen.
We will conduct a risk analysis of on-site electronic equipment based on environmental testing in accordance with ISA71.04-1985, and visualize the corrosion risk on-site.
By conducting an environmental analysis, we will quantitatively assess the risks to equipment caused by corrosive gases. We will install copper and silver test specimens on-site and conduct a one-month exposure test, analyzing the thickness of the corrosion rust layer to evaluate the risks at the site. We will submit a report in accordance with ISA standards. We always have test specimens in stock, so we can start the environmental investigation immediately.
![[Technical data presentation in progress!] Ozone crack](https://image.www.ipros.com/public/product/image/b09/2001007949/IPROS93544913721919068845.png?w=280&h=280)
For customers in the Tokai area: It is important to choose materials suitable for the usage environment! Please consult us if you are having trouble with rubber materials.
At our company, we select materials based on our extensive knowledge and proven track record in sales and verification. Some rubber materials can develop cracks on their surface when exposed to ozone or ultraviolet light. This occurs because, when left in the atmosphere, ozone causes a chemical reaction in the rubber, leading to molecular-level breakage. It is important to choose materials that are suitable for the usage environment of the rubber. If you are struggling with rubber material selection, please feel free to consult us. A must-see for customers in the Tokai area, especially in Shizuoka, Aichi, and Yamanashi prefectures! You can start with just a consultation. Please do not hesitate to contact us. 【Test Conditions (Excerpt)】 ■Test Specimen: O-Ring P-24 (Inner Diameter 13.8 x Wire Diameter 3.5) ■Rubber Materials: Nitrile (NBR), Fluoroelastomer (FKM), Silicone (VMQ), Ethylene Propylene (EPDM) ■Elongation Rates: 10%, 20%, 30% ■Test Location: Outdoor Exposure ■Evaluation Criteria: Degree of Cracking *For more details, please refer to the PDF document or feel free to contact us.
Compliant with new ASTM and ISO standards! Wilson hardness reference blocks and indenters with A2LA and NVLAP calibration certificates.
Wilson hardness reference blocks are made from the highest quality materials to set industry standards and ensure that uniform and reusable test blocks are available. We offer a variety of scales and blocks to accommodate a wide range of hardness scales related to Rockwell, Brinell, Knoop, and Vickers tests. All Wilson test blocks are calibrated at the Wilson Hardness Calibration Laboratory in Binghamton, New York. Wilson Laboratories is A2LA ISO-IEC 17025 certified, and the testers used in the calibration process utilize NIST traceable equipment for strict monitoring. 【Hardness Reference Block Lineup】 ■ Wilson Rockwell Hardness Reference Block ■ Wilson Brinell Hardness Reference Block ■ Wilson Vickers Hardness Reference Block, Micro Vickers Hardness Reference Block, Knoop Hardness Reference Block *For more details, please refer to the PDF document or feel free to contact us.
The sample is immersed in a 6% hydrochloric acid solution of ferrous chloride at room temperature for 96 hours, and the weight change before and after the test is measured.
We will introduce the corrosion resistance test of "Silicoroi." First, prepare a test solution of 6% hydrochloric acid and ferric chloride solution. The test specimens are produced from various materials under different heat treatment conditions. The surface roughness is adjusted using waterproof sandpaper #400, and degreasing is performed with acetone. Then, each material is immersed in the 6% hydrochloric acid and ferric chloride solution at room temperature for 96 hours, and the weight changes before and after the test are measured using a precision balance to determine the corrosion rate. For more details, please download the catalog and take a look. [Test Specimens (Partial)] ■SUS304 ■SUS316L ■SUS420J2 ■SUS440C ■SUS630-H900 *For more details, please refer to the PDF materials or feel free to contact us.
The thermal conductivity of Silicoroy XVI is 11.9 W/mK! It may have an advantage for a short period of time.
This is an introduction to the hardness reduction test of age-hardened materials after holding at 700°C. The aim is to investigate the hardness reduction in a short-term high-temperature holding environment, such as during brazing. Test specimens that have undergone aging treatment were placed in an electric furnace (atmospheric furnace) held at 700°C, and hardness measurements were conducted after removing them at various set times and returning them to room temperature. Additional aging treatment (460°C×4hr/AC) was performed on the same test specimens, followed by re-measurement. For more details, please download and view the catalog. [Test Specimens] - Material: Silicoalloy XVI (round bar) φ28mm×10mm, cut into four pieces - Solution treatment: 1050°C/WQ - Pre-aging: 200°C×2hr/AC - Age-hardening heat treatment: 460°C×12hr/AC - Polishing finish: Polished with waterproof paper #400 (oxide scale removed) *For more details, please refer to the PDF document or feel free to contact us.
We are selling adult films and DVDs in stock.
This is a test piece for a shot blast machine.
