Oil Product List and Ranking from 100 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

Oil Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

  1. スタンダード石油大阪発売所 Osaka//Trading company/Wholesale
  2. ユシロ 営業支援部 Tokyo//others
  3. 出光興産 潤滑油二部　セールス＆マーケティング課 Tokyo//others
  4. 4 カクタニ Fukuoka//Trading company/Wholesale
  5. 5 keg Kyoto//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Oil Product ranking

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

  1. Aliphatic hydrocarbon solvent "T-SOL 3040" スタンダード石油大阪発売所
  2. Rust inhibitor "Non-Ruster" ユシロ 営業支援部
  3. High boiling point aromatic solvent 'S100/S150' スタンダード石油大阪発売所
  4. 4 Lubricant for plastic processing "Yushiron Former" ユシロ 営業支援部
  5. 5 Fuel Additive Oil Tack OILTAC カクタニ

Oil Product List

31～60 item / All 301 items

Displayed results
Exterior wall deterioration diagnosis - Infrared method deterioration diagnosis technology

Exterior wall deterioration diagnosis - Infrared method deterioration diagnosis technology

Rationalization of maintenance management for concrete structures, and cost reduction and efficiency improvement in the maintenance and preservation of structures!

The infrared method for diagnosing exterior wall deterioration technology realizes the rationalization of the maintenance management of structures and the reduction and efficiency of maintenance costs. The surface of the exterior wall is warmed by external heat, which is then transmitted to the concrete medium. At this time, if there are any areas of delamination on the exterior wall, the air layer that forms in the gaps obstructs heat transfer, causing the surface temperature fluctuations to be greater and hotter in the damaged areas (delaminated areas) compared to the intact areas. Utilizing this characteristic, the surface temperature is captured and detected as an image using an infrared camera. 【Features】 ■ All environmental temperature, location, and shooting resolution at the time of imaging are recorded and reported. ■ All information regarding the accuracy of the infrared survey is made open. 　→ A second opinion can be sought regarding the results. ■ Reliable technology 　→ Implemented by technicians who have undergone training from the Japan Infrared Deterioration Diagnosis Technology Promotion Association (JAIRA). *For more details, please contact us.

  • Non-destructive testing
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Micro Cut 240PF Introduction Case] U Manufacturing Company

[Micro Cut 240PF Introduction Case] U Manufacturing Company

New oil purchase cost reduction rate of 24%! By extending the fluid exchange cycle, waste fluid disposal costs are also reduced.

We would like to introduce a case study from U Manufacturing Co., which has implemented the "Microcut 240PF." The company owns about 100 machining machines and used 8 to 10 DM of water-soluble cutting oil per month, but faced issues with reducing the costs of purchasing new oil. As a solution, they switched to "Microcut 240PF (anti-corrosion)" and reduced new oil purchasing costs through the extension of fluid life. This also led to a reduction in waste fluid disposal costs due to the extended fluid exchange cycle. [Case Study] ■ Customer's Issues - Faced problems with reducing new oil purchasing costs ■ Improvement Measures - Switched to Microcut 240PF (anti-corrosion) - Reduced new oil purchasing costs through fluid life extension *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Diesel Fuel Additive "ECOMAX VD Series"

Diesel Fuel Additive "ECOMAX VD Series"

Just add it to the fuel tank when refueling! It significantly improves fuel quality and increases combustion efficiency.

The "ECOMAX VD Series" is a diesel fuel additive that significantly reduces expenses. The container has a measuring scale, allowing you to add the appropriate amount without getting your hands dirty. It is available in 4L and 18L cans. It provides sufficient power even with minimal acceleration and can reduce engine noise. Additionally, it decreases black smoke and AdBlue consumption, significantly reducing exhaust emissions. 【Features】 ■ Significant improvement in fuel efficiency ■ Reduced frequency of DPF regeneration ■ Major reduction in exhaust emissions ■ Decreased black smoke and AdBlue consumption ■ Reduction in engine noise *For more details, please refer to the PDF document or feel free to contact us.

  • Medicines
  • others
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rust inhibitor "Non-Ruster"

Rust inhibitor "Non-Ruster"

Wide range of proven use! Rust preventive agent that adapts to various environmental conditions.

"Non-Ruster" is a rust preventive agent that adapts to various environmental conditions. We offer a wide range of products, including solvent-diluted rust preventive oils and lubricating rust preventive oils that have a proven track record in intermediate and final rust prevention, as well as water-soluble rust preventives that can be diluted with water, contributing to workplace safety and environmental improvement. [Features] - It has water displacement properties and does not cause oil burning or oxidation/hardening of the film during long-term storage (P329). - It is a high flash point oil-based rust preventive oil with excellent exposure resistance (P750). - It has low viscosity and excellent cleaning power (P307D). - It has excellent oil burning resistance and degreasing properties with a thin film (PZ2). - It leaves minimal residue during heat treatment (P357). *For more details, please refer to the catalog or feel free to contact us.

  • others
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Asia Food Co., Ltd. International Department Business Introduction

Asia Food Co., Ltd. International Department Business Introduction

Food that considers health from taste, safety, and security.

At Asia Food Co., Ltd., we primarily offer exquisite dim sum "Super Dim Sum" made by skilled chefs, and our international department imports health-promoting foods from around the world. We handle the import of various products, including perilla oil and extra virgin oil, and we also accept imports of coconut-related products such as coconut flakes and coconut flour for commercial use. If you have any requests, such as wanting to increase capacity for confectionery or bakery factories, please feel free to contact us. 【Products Offered】 ■ Extra Virgin Avocado Oil ■ Almond Oil ■ Apricot Seed Oil ■ Argan Oil ■ Perilla Oil, etc. *This catalog is a digest version. If you need the full version, please inquire. *For more details, please refer to the catalog or feel free to contact us.

  • others
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metalworking Fluids / Industrial Lubricants Comprehensive Catalog

Metalworking Fluids / Industrial Lubricants Comprehensive Catalog

We are currently offering a comprehensive catalog featuring a wide variety of metalworking oils and industrial lubricants! Innovative technologies related to special lubricants are highly regarded internationally!

The "Metalworking Fluids / Industrial Lubricants Product Program Catalog" is a product catalog from Fuchs Japan Co., Ltd., which mainly manufactures and sells metalworking fluids, greases, and automotive lubricants. It features a variety of metalworking fluids and industrial lubricants, including the water-soluble cutting and grinding fluid "EcoCool," as well as "EcoCut," "AntiCorrit," and "Renolin." [Contents] ■ Company Overview ■ Metalworking Fluids ■ Rust Inhibitors ■ Lubricants for Machine Tools ■ Cleaning Agents, etc. For more details, please request the materials or view the PDF data available for download.

  • Medicines
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powerful Cleaning Agent NC

Powerful Cleaning Agent NC

Are you giving up on stubborn burnt stains?

- The oil stain has denatured due to heat and the passage of time, and is firmly stuck. - It won't come off at all, even with scrubbing. - Is there nothing I can do but give up and accept "that's just how it is"? We can solve such concerns! This is the definitive solution for removing oil stains. It deeply penetrates the dirt, completely breaks it down, and removes it. Stubbornly stuck dirt can flake off and potentially cause contamination. (Use in concentrated form or diluted up to 100 times) *For more details, please refer to the catalog or feel free to contact us.

  • others
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hydraulic operating oil "SUNTAC"

Hydraulic operating oil "SUNTAC"

Just by replacing your oil with this, the hydraulic system's oil leak will stop!

"SUNTAC" is a premium hydraulic fluid that provides oil leak and splash prevention functions for various equipment. By appropriately blending base oil and paraffin-based oil, it expands shrunk seals to prevent oil leaks from gaps. Additionally, the incorporation of a sticky agent creates a thread-drawing effect that prevents oil leaks from connection points. This contributes to reducing running costs and improving the work environment. If you are experiencing issues with oil leaks, please try our products. 【Features】 ■ Stops oil leaks ■ Expands shrunk seals ■ Prevents oil leaks with thread-drawing effect ■ Reduces running costs ■ Improves work environment *For more details, please contact us or download the catalog.

  • Prime movers, torque converters, hydraulic equipment, generators
  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
What is Nitro Thermo Spray (NTS)?

What is Nitro Thermo Spray (NTS)?

Nitrogen coating system! It is used in various painting scenes.

The "Nitro Thermo Spray (NTS)" is a painting system that uses nitrogen gas instead of the conventional compressed air painting method. The nitrogen gas extraction takes in the compressor air from the factory and continuously extracts nitrogen using a special device. It is then heated and used as heated nitrogen gas for painting, aiming to reduce paint usage and improve quality. It is sold worldwide and adopted in various painting scenes. 【Nitrogen Painting Features】 ■ Almost entirely nitrogen ■ Contains no moisture ■ Lightweight, suitable for low-pressure painting ■ Improved defect rates and reduced booth contamination ■ Less variation in spray patterns, providing stability *For more details, please refer to the PDF materials or feel free to contact us.

  • Plastering and painting work
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cutting oil "Suscutt SUS-365"

Cutting oil "Suscutt SUS-365"

Environmentally friendly product (chlorine-free)! Universal type cutting oil.

"Saskat SUS-365" is a cutting oil suitable for tapping, threading, drilling, reaming, and broaching of materials such as stainless steel, aluminum, copper, and titanium alloys. It can be used for most cutting and grinding processes. Its strong penetration and high lubricating properties increase cutting speed and improve work efficiency. 【Features】 ■ Does not contain chlorine-based extreme pressure agents ■ Reduces tool wear and extends tool life ■ Improves finish quality and enhances dimensional accuracy ■ Usable with band saws and metal saws *For more details, please download the PDF or contact us.

  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cutting oil "Suscutt NS-500"

Cutting oil "Suscutt NS-500"

Suitable for most cutting and grinding processes! Environmentally friendly product (chlorine-free, plant-based oil)

The "Saskat NS-500" is an environmentally friendly cutting oil (chlorine-free, plant-based) that enhances cutting speed and improves work efficiency due to its strong penetration and high lubrication properties. It can be used for lubrication in tapping, threading, drilling, reaming, broaching, metal sawing, band sawing, and other machining of difficult-to-cut materials such as stainless steel, aluminum, and titanium alloys. 【Features】 ■ Usable for most cutting and grinding processes ■ Safe as it does not use chlorine-based additives ■ Reduces tool wear and extends tool life ■ Improves surface finish and dimensional accuracy, and can be safely used as it is plant-based *For more details, please download the PDF or contact us.

  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
The mechanism of BG Diesel Care (using specialized tools)

The mechanism of BG Diesel Care (using specialized tools)

Injector and fuel line cleaning with specialized equipment! Refresh like a new car!

"BG Diesel Care" not only cleans injectors but also dissolves and liquefies dirt throughout the common rail and fuel lines, burning it away to eliminate it. Remove the return and supply hoses from the top of the diesel fuel tank, and connect the return hose (black) and supply hose (red) using a dedicated adapter. Run the engine with the cleaning solution (two-part) for about 30 to 45 minutes to clean the injectors, common rail, and fuel lines. It is safe as no solid dirt is sent into the engine. Therefore, it is not necessary to replace the elements before the operation. Furthermore, when used in conjunction with a diagnostic tool (diag), detailed diagnostics and progress measurements are possible. [Features] ■ Genuine and maintenance-specified products from major truck manufacturers and major construction equipment manufacturers ■ Detailed diagnostics and progress measurements possible when used with a diagnostic tool ■ Cleans injectors, common rail, and fuel lines using only the cleaning solution (two-part) *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explained in Manga: DPF Recovery! How to Use Fuel Additives

Explained in Manga: DPF Recovery! How to Use Fuel Additives

No need for replacement or cleaning! It can be added even if the fuel tank is not full.

Is your DPF getting clogged and the forced combustion warning light frequently turning on, causing issues with deliveries? Our fuel additive 'DFC Plus HP' first restores the function of the injectors and recovers the engine's combustion temperature, allowing the DPF to burn off soot on its own. It takes about 3 to 7 days, but there are no side effects at all. This booklet explains "How to Use DPF Recovery 'DFC Plus HP'" in a comic format. Please take a look. Additionally, we are answering inquiries and questions on Twitter. Search for 'Chemical Vice President'! Feel free to stop by. 【Features】 ■ Easy to operate without replacement or cleaning ■ About 80-90% effective without removal or replacement ■ Understand reasons if it doesn't work ■ No side effects on the DPF ■ Long-lasting normal state after DPF recovery ■ Products from a globally trusted company for a long time *For more details, please refer to the PDF materials or feel free to contact us.

  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[DPF Consultation Center] Diesel Fuel Additive 'DFC Plus HP'

[DPF Consultation Center] Diesel Fuel Additive 'DFC Plus HP'

No side effects from the DPF! We will slowly resolve the causes of DPF clogging, so it is very safe.

"DFC Plus HP (BG23232)" is a diesel fuel additive that does not use any metal-based components such as cerium oxide or iron oxide, which merely lower the combustion temperature of PM (soot). As a result, there are no side effects such as the accumulation of cerium or iron residues in the DPF that could shorten its lifespan. Additionally, due to environmental pollution and health concerns, the use of cerium is increasingly being banned in Europe and the United States. This product gradually resolves the causes of DPF clogging, making it very safe. 【Features】 ■ Repairs approximately 80-90% without removal or replacement ■ Understands the reasons if it does not work ■ No side effects on the DPF ■ Long-lasting maintenance of normal condition after DPF recovery ■ A product from a globally trusted company for a long time *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
50cc to 250cc motorcycle set product lineup

50cc to 250cc motorcycle set product lineup

Outstanding effectiveness! Exceptional experience! Full refresh of oil and fuel systems, including engine flushing!

We would like to introduce our product lineup for 50cc to 250cc motorcycle sets. Starting with the engine oil oxidation prevention and enhancement agent "EPC," which is simply added to engine oil, we also offer the fuel system cleaner "44K" and the engine flushing agent "EPR." These products significantly improve ride comfort, performance, and durability by caring for the motorcycle from the inside. 【Product Lineup】 ■ Engine oil oxidation prevention and enhancement agent "EPC" ■ Fuel system cleaner "44K" ■ Engine flushing agent "EPR" *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Viscosity controller dedicated lubricant "Super 1000"

Viscosity controller dedicated lubricant "Super 1000"

Special lubricant containing a unique additive to prevent the expansion and contraction of rubber rings due to oil.

"Super 1000" is a specialized lubricant used when operating viscosity controllers and diaphragm pumps. It increases the viscosity of the oil, extending the residence time within the diaphragm pump. It comes in a 1-liter resin bottle, designed with a pointed cap for easy pouring into the oil tank of the viscosity controller. 【Features】 ■ Increases the viscosity of the oil, extending the residence time within the diaphragm pump ■ Uses special additives to prevent expansion and contraction of rubber rings due to the oil ■ 1-liter resin bottle ■ Pointed cap for easy pouring into the oil tank of the viscosity controller *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Analysis Case] Rust Prevention Test of Water-Soluble Cutting Oil (1)

[Analysis Case] Rust Prevention Test of Water-Soluble Cutting Oil (1)

Explanation with photos! After polishing the steel plate and applying the test solution, it was left to stand, and the occurrence of rust was observed.

This is an introduction to a case where a test solution was applied to a steel plate, and the occurrence of rust was observed. It was conducted to confirm the corrosiveness to tools, castings, and machines. The steel plate was polished, the test solution was applied, and then it was left to stand. Subsequently, the occurrence of rust was checked. [Analysis Overview] ■ Purpose: To evaluate the rust prevention properties of water-soluble cutting oils in a simple manner ■ Subject: Water-soluble cutting oil ■ Analysis Items: Exposure test ■ Test Overview: A test solution was applied to a steel plate, and the occurrence of rust was observed *For more details, please refer to the PDF document or feel free to contact us.

  • Analysis and prediction system
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fuji Bussan Co., Ltd. Company Profile

Fuji Bussan Co., Ltd. Company Profile

Based in Shizuoka, we provide customer satisfaction in various fields, from petroleum sales to eel farming.

Fuji Bussan, based in Shimizu Ward, Shizuoka City, is engaged in a wide range of activities including the sale of offshore oil, fishing bait, frozen seafood products, and land-based oil sales centered around gas stations. Additionally, the company develops environmentally friendly concrete release agents, engages in eel farming and processing sales, and operates solar and wind power generation businesses as well as system sales. The company has many business divisions, including the Environmental Energy Department, New Energy and Real Estate Department, Food Department, Live Eel Business Department, Marine Department, TCC Department, and Insurance Business Department. 【Business Activities】 ■ Sale of petroleum products ■ Sale of petrochemical products, etc. ■ Sale of fishing bait ■ Eel farming and processing ■ Sale of frozen foods and seafood products, as well as refrigerated storage ■ Management of gas stations ■ Solar and wind power generation businesses and system sales *For more details, please refer to the PDF document or feel free to contact us.

  • Photovoltaic power generation system (solar system, energy-saving housing, electricity sales business)
  • Reinforcement and repair materials
  • others
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
BP Castrol Gear Lubrication Optimization 'Optigear'

BP Castrol Gear Lubrication Optimization 'Optigear'

Optimize gear lubrication.

■Castrol's unique technology, 【PD Technology】, smooths the lubrication surface and prevents micro-pitching. ■【PD Technology】 reduces friction resistance and suppresses the generation of friction heat. *For more details, please download the PDF or contact us.*

  • paint
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Universal Resources Co., Ltd. Company Profile

Universal Resources Co., Ltd. Company Profile

Transforming waste oil into future lubricants. For the manufacturing and sales of industrial oils, leave it to us.

Our company is globally engaged in the recovery of waste oil and the re-refining of industrial processing oils and fuels. Through our core business of resource recycling, we implement direct and indirect environmental conservation and promote environmental measures in collaboration with our partners. We handle biodegradable oil "ALESTER," powder-type cleaning agent "ALECTER," and liquid alkaline electrolyzed water "ICE," among others. 【Business Activities】 ■ Manufacturing and sales of 100% plant-based industrial oils ■ Purchase and sale of waste cooking oil ■ Import and export of vegetable oils ■ Production and sales of plant-based detergents, strippers, and solvents ■ Research and development of products primarily made from vegetable oils and consulting services ■ All operations incidental to the above *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Information] Proper Use of Lubricating Oil: Basic Edition

[Information] Proper Use of Lubricating Oil: Basic Edition

Please understand lubricants correctly and use them properly! We will also introduce the manufacturing process and Idemitsu's base oils.

To use lubricants correctly, you must first understand what lubricants are. So, what exactly are lubricants? This document provides a detailed explanation of the types and functions of lubricants, their manufacturing, viscosity, and also covers grease. Please take a moment to read it. 【Contents】 ■ What is lubricant? 1. Types of lubricants 2. Functions of lubricants 3. Manufacturing of lubricants 4. Viscosity of lubricants 5. Grease *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Biodegradable hydraulic oil "Bios Hydro SE" *Case studies available.

Biodegradable hydraulic oil "Bios Hydro SE" *Case studies available.

Reduces the risk of water quality and soil contamination. Synthetic ester-based hydraulic oil registered in NETIS. It has a high flash point and is not classified as hazardous under the Fire Service Act.

"Bios Hydro SE" is a biodegradable hydraulic oil based on synthetic esters characterized by high oxidative stability. It has a high flash point of over 250°C, making it non-hazardous under fire safety laws. In addition to excellent biodegradability and lubricity, it is registered with NETIS, making it suitable for use in projects that require consideration for water quality and soil, such as sewer maintenance and bridge construction. 【Features】 ■ NETIS registration number: KT-200096-A ■ Usable in equipment for outdoor use ■ Excellent compatibility with sealing materials ■ Contributes to ESG and SDGs initiatives ★ By adopting "Bios Hydro SE," which is NETIS registered, companies have successfully acquired new customers, and we are currently offering "case study" materials. You can view them immediately via the "PDF Download" link below.

  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case studies of Idemitsu Kosan's lubricants contributing to the SDGs <4 themes>

Case studies of Idemitsu Kosan's lubricants contributing to the SDGs <4 themes>

There are also cases where energy conservation and CO2 emissions reduction have been successful. We are presenting case studies related to initiatives aimed at achieving the SDGs.

Currently, we are distributing a summary of four case studies related to the adoption of our products aimed at achieving the SDGs. 【Featured Products and Case Studies】 ＜Lubricating Oil for High-Temperature Chain Drive Systems: "Chain Master Series"＞ ◎ Utilized to reduce maintenance costs caused by oil film breakage of chains in high-temperature paint drying ovens. ◎ Successfully extended chain lifespan and reduced equipment maintenance costs by 2 million yen. ＜Coolant for Difficult-to-Cut Materials: "Master Cool"＞ ◎ Used during the processing of heat-resistant difficult-to-cut material SUS430, effectively reducing the amount of liquid replenishment and stickiness in the processing chamber due to the high concentration of coolant. ◎ Successfully reduced liquid replenishment and stickiness by operating at a lower concentration. ＜Multipurpose Oil: "Versital Force"＞ ◎ Utilized in the pressing process as a measure to achieve zero CO2 emissions in factories. ◎ Achieved a 2.3% energy saving and a reduction of 70 tons in CO2 emissions. ＜Biodegradable Hydraulic Oil: "Bios Hydro SE"＞ ◎ Used as a measure to demonstrate environmental consideration during river construction near residential areas, taking into account the potential leakage of crane hydraulic oil. ◎ Successfully differentiated from competitors in terms of environmental consideration and secured projects sensitive to environmental pollution. *For more details, please refer to the PDF document.

  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of Bios Hydro SE] NETIS Registration Biodegradable Hydraulic Oil

[Case Study of Bios Hydro SE] NETIS Registration Biodegradable Hydraulic Oil

Countermeasures for hydraulic oil leakage! Introducing a case where we were able to secure orders for specific projects.

Since its founding in 1974, Yamane Construction Co., Ltd. in Hiroshima Prefecture has contributed to the local community by focusing on marine civil engineering using its own marine cranes. We would like to introduce a case where they adopted the biodegradable hydraulic oil "Bioshydro SE." During the operations of the crane vessel, mineral oil was used as the hydraulic oil for the crane. When conducting river construction near residential areas, there was a challenge to demonstrate greater environmental consideration in terms of leakage prevention of the hydraulic oil. After the adoption, they were able to utilize it for projects requiring environmental consideration and could promote themselves as a company that is conscious of environmental issues regarding hydraulic oil, allowing them to differentiate themselves from other companies in terms of environmental considerations. 【Case Summary】 ■ Background - Leakage prevention of hydraulic oil was a challenge. ■ Solution - Adoption of biodegradable hydraulic oil for environmental consideration. ■ Effect - They were able to secure contracts for projects where environmental pollution prevention was a key point. *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of Bios Hydro SE] Consec Co., Ltd. Hiroshima Prefecture

[Case Study of Bios Hydro SE] Consec Co., Ltd. Hiroshima Prefecture

It can be used with existing equipment! Here is a case study that successfully improved inquiries from both new and existing users.

Since its establishment in 1967, Consec Co., Ltd. in Hiroshima Prefecture has been responding to societal needs as a civil engineering and construction-related company. We would like to introduce a case where they adopted the hydraulic oil "Bios Hydro SE." In conjunction with the launch of a new compact hydraulic unit, they were considering a differentiation strategy from other companies. However, due to the significant environmental needs in the civil engineering and construction sectors, proposals that addressed these points were key. They adopted our hydraulic oil as a new promotional strategy. After adoption, they were able to achieve strong inquiries even for high-performance products. 【Case Overview】 ■ Background - Differentiation from other companies in the civil engineering and construction fields is a challenge. ■ Solution - Gained strengths through the adoption of hydraulic oil. ■ Effect - Received requests to adopt it not only for new products but also for existing products. *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of the energy-saving, high flash point multipurpose oil "Bersital Force".

Introduction of the energy-saving, high flash point multipurpose oil "Bersital Force".

[Presenting materials with case studies] Improve gear transmission efficiency! Demonstrates excellent energy-saving effects.

"Vartal Force" is a multipurpose oil that can be used as gear oil, bearing oil, and hydraulic fluid in various industrial machinery under high temperature and high load conditions. Thanks to its unique additive formulation, it prevents wear and seizure, contributing to the extension of the fatigue life (service life) of gears and bearings. Additionally, it maintains excellent oxidation stability even at high temperatures, suppressing viscosity increase and sludge formation. We are offering materials with case studies. Please feel free to download and take a look. 【Features】 ■ Prevents wear and seizure, contributing to the extension of the fatigue life (service life) of gears and bearings ■ Excellent oxidation stability suppresses viscosity increase and sludge formation ■ Improves gear transmission efficiency, demonstrating excellent energy-saving effects ■ Classified as "flammable liquids" due to a flash point of over 250°C ■ Transparent pale yellow color makes it easy to visually manage oil degradation and contamination *For more details, please refer to the PDF materials or feel free to contact us.

  • Safety and consumables
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water displacement rust preventive oil "Super Coat RS"

Water displacement rust preventive oil "Super Coat RS"

Eliminate poor rust prevention and significantly reduce rework processes! Cut costs by minimizing waste and oil supply.

"Super Coat RS" is a water-displacing rust preventive oil that has high water displacement and rust prevention properties, ensuring stable finishing quality and reducing the need for rework processes. With our product's high water separation capability, it is possible to dispose of only the separated water, which reduces waste and oil supply amounts. This not only contributes to the reduction of rework processes but also significantly helps in terms of cost. Additionally, due to its low viscosity, it improves the working environment by making manufacturing lines and products less sticky. 【Features】 ■ The combination of water displacement and rust prevention significantly reduces rework processes. ■ High water separation capability helps cut costs by minimizing waste and oil supply amounts. ■ Improvement of the working environment through odor reduction and other factors. ■ High flash point for easier management. ■ Uses barium-free additives, considering environmental impact. *For more details, please refer to the PDF document or feel free to contact us.

  • Rust Inhibitor
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multi-purpose oil "Bersital Force" for improved gear efficiency

Multi-purpose oil "Bersital Force" for improved gear efficiency

Increased productivity and reduced CO2 emissions! Improved productivity due to high transmission efficiency of gears.

We would like to introduce our multi-purpose oil "Bersital Force," which improves gear efficiency. This product is used in the gear components of equipment such as presses, reducers, and large forging presses to achieve better power transmission and stable operation. As it is a designated combustible material, it offers many management benefits. Not only does it reduce fire risk, but it also eliminates the quantity restrictions imposed by fire safety laws, making management much simpler. 【Features】 ■ Enhanced protection for gears and equipment, and excellent management as a designated combustible material ■ Excellent oxidation stability, making it resistant to deterioration and allowing for long-term stable use ■ By simply changing the oil, it contributes to a reduction of 5.8 tons of CO2 emissions per unit per year *For more details, please refer to the PDF document or feel free to contact us.

  • Medicines
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water-soluble cutting oil "Alpha Cool NV Series"

Water-soluble cutting oil "Alpha Cool NV Series"

Extended shelf life against decay & significant reduction in supply quantity! Improved decay resistance, extending the performance maintenance period by over 250%.

The "Alpha Cool NV Series" is a water-soluble cutting oil that extends the shelf life by using amines that are less volatile, while also suppressing the generation of odors and smoke. It has successfully reduced the carry-off amount significantly. Reports from actual sites indicate that the replenishment amount has been reduced by 40%. As a result, both usage and disposal amounts can be reduced, and the frequency of replenishment work decreases, greatly benefiting productivity on-site. 【Features】 ■ Improved anti-corrosion properties, extending performance maintenance time by over 250% ■ Reduced carry-off amount, cutting replenishment by 40% ■ Contribution to the environment and reduction of disposal costs ■ Enhanced safety for workers due to reduced smoke *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Technology
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Technical Introduction: High Rigidity Oil

Technical Introduction: High Rigidity Oil

Due to its unique molecular structure, the volume contraction under pressure is small! An improvement in pressure responsiveness is expected.

We would like to introduce our technology, "High Rigidity Oil." It is characterized by small gaps between molecules and a high volume elastic modulus K value. You can expect a reduction in compression energy loss (also suppressing temperature rise), improved pressure responsiveness, and enhanced control accuracy (reduction of lost motion). If you are interested in more details, please contact us. 【Features】 - Small increase in oil temperature - Low gas solubility - Low traction coefficient - Oxidation stability and wear resistance equal to or greater than that of typical hydraulic fluids *For more details, please refer to the PDF materials or feel free to contact us.

  • Other services and technologies
  • Oil

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Oil

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.