Battery Power Monitor / Part Number M405K-8701K
For measuring the cell voltage of UPS batteries!
Reduce human costs in discharge testing with comparator functionality.
- Company:シロ産業
- Price:10,000 yen-100,000 yen
1~15 item / All 26 items
For measuring the cell voltage of UPS batteries!
Reduce human costs in discharge testing with comparator functionality.
It was developed to fulfill three purposes: prevention of hypoxia accidents, management of oxygen concentration, and various experiments.
● The real-time oxygen concentration can be checked on a large LCD. ● Compact and easy to hold shape. There is an optional soft case available. ● Alarm concentration settings can be configured in two stages. Both upper and lower limits can be selected. ● The electronic buzzer sound is easily identifiable during an alarm. ● Two red LEDs indicate the alarm. ● You can choose between alarm hold or automatic reset. ● Using external alarm output, control of rotating lights and solenoid valves is possible. ● An analog output of 0-1V can be used to extract oxygen concentration externally.
Compact, lightweight, loud alarm sound. Long usage time.
● Compactly store the sensor cable in the winding section. Display the cable length every 1 meter.
You can confirm a cleanliness level equivalent to ISO Class 7 (Class 10,000), which is almost a sterile space.
● Using a light scattering pulse measurement system that utilizes upward airflow generated by heater heat, it can measure particles of 0.5μm and larger, and monitor cleanliness levels from ISO Class 7 equivalent to general outdoor air (ISO Class 9). ● Cleanliness levels from Class 7 to 9 are displayed in five color-coded stages (blue, yellow, yellow, red, red), making it easy to distinguish the current cleanliness level. ● The transistor output contacts for external output allow the current status to be output to external devices. ● It is compact and easy to carry. ● The power supply is DC 24V, so it can also operate on batteries.
Salivary α-amylase (salivary amylase) can be easily measured in saliva.
Dry clinical science analysis device It allows for the non-invasive and easy measurement of α-amylase (salivary amylase) in saliva. (Approximately 60 seconds)
Ideal for monitoring component concentrations of low-concentration VOC gases!!
●Gas analysis using gas chromatography method Gas separation is performed using a column, allowing for the identification of gas components from the peaks obtained. ●Portable type that enables on-site measurement without the need for a carrier gas cylinder There is no need to prepare a gas cylinder as the surrounding atmosphere is purified to serve as the carrier gas. This allows for measurements to be taken on-site, with results confirmed immediately. ●Realization of low concentration VOC detection through semiconductor gas sensors and concentration High-sensitivity semiconductor gas sensors are used for gas detection, and by performing concentration operations, detection of ultra-low concentration VOCs in the order of 10μg/m3 is possible. (Standard measurement time: 30 minutes) ●Chromatogram data acquisition is possible By using the accompanying PC application, chromatograms can be obtained, and chromatographic data can be saved in EXCEL format.
Digital temperature and humidity display monitor
●Temperature and humidity display device using LED with a character height of 57mm ●Alarm output function (optional) that can connect a buzzer, rotating light, etc.
Domestic first: Hydrogen sulfide (H2S) alarm setting value compatible with 1ppm.
・Intrinsic safety explosion-proof structure ・Can be used as explosion-proof equipment even in hydrogen and acetylene atmospheres
CO2 (NDIR method, expressed in ppm) Temperature, humidity MAX/MIN hold function Atmospheric calibration function Low battery indication
● CO2 (NDIR method, expressed in ppm) ● Temperature, humidity ● MAX/MIN hold function ● Atmospheric calibration function included ● Low battery indication ● Alarm function included
Non-contact high-speed temperature detection monitor (for screening) / Model number M2846T-1039H
The M2846T-1039H combines high-precision temperature measurement with a camera, using AI to detect multiple individuals non-contact and at high speed up to 3 meters (recommended distance is 1 to 2.5 meters). ■ Overview The M2846T-1039H combines high-precision temperature measurement with a camera, using AI to detect multiple individuals non-contact and at high speed up to 3 meters (recommended distance is 1 to 2.5 meters). It can be used in public areas such as hospitals, schools, and terminals, as well as in warehouses and buildings where fire prevention is necessary. By utilizing the alarm function, a warning sound can alert you even if you are not present at the detection location. During the coronavirus infection, entrance and exit points in public areas involve close checks, manual temperature measurements, paper-based entry management, and manual information dissemination via smartphones. This management takes time and increases the risk of infection among staff due to the need for additional personnel. Furthermore, this method makes it difficult to trace infections. The M2846T-1039H, when connected to a network, can help solve these issues.
Equipped with a new type R sensor for high functionality and durability, featuring one of the longest continuous usage times in the world, and a diverse lineup of sensors.
■Evolution to High Functionality and Durability ●Achieves a long continuous usage time of 9000 hours Realizes approximately 9000 hours (※) of long continuous usage time, one of the longest in the class of compact portable gas monitors. ●Passes 7m drop durability test Even if dropped during high-altitude work, the risk of failure is low, allowing for safe use. ●Equipped with a new high-functionality and high-durability R sensor - The sensor has been renewed. It excels in durability and performance, achieving a 3-year sensor warranty. - Usable in a wide temperature range (-40 to +60°C). - Offers a carbon monoxide sensor that is hardly affected by hydrogen interference, suitable for environments where hydrogen coexists, such as the steel market. - Features Japan's first carbon monoxide & oxygen dual sensor, enabling detection of two components in a compact portable device (carbon monoxide and oxygen concentrations can be displayed simultaneously). ■Rich Features and Reliable Design - Protection rating: Equivalent to IP66/67, ensuring a dustproof and waterproof structure for outdoor work. - Designed with intrinsic safety explosion-proof structure (domestic explosion-proof/ATEX/IECEx), making it usable in hazardous locations. ■Power supply options available: rechargeable battery / dry battery Offers two power supply options: dry battery specification for immediate use anytime, and rechargeable battery specification for repeated use (please specify at the time of order).
This device is an ideal measuring instrument for agricultural, horticultural, and hydroponic applications that require continuous monitoring of pH and EC values for proper plant growth.
This device displays the pH and EC values of the solution on their respective LCD screens, making it easy to read and monitor. The replaceable pH electrode MF2PH-1286 is of the gel type, and the connection part is waterproof. The pH electrode features a unique design that prevents clogging of the liquid junction due to high concentrations of solutions such as phosphates and nitrates. It is equipped with a ground rod for more accurate pH measurements and to extend the life of the electrode. Additionally, this device is compact and easy to install and handle. It is an ideal measuring instrument for any application requiring continuous monitoring.
Easy-to-understand notification of ventilation timing The necessity of ventilation The risk of infection clusters increases in poorly ventilated enclosed spaces.
Easy-to-understand notification of ventilation timing The necessity of ventilation It is said that the risk of infection clusters increases in poorly ventilated enclosed spaces. Measuring CO2 (carbon dioxide) concentration is an effective method to reveal inadequate ventilation in spaces used by many people.
Large CO2 Temperature and Humidity Display Monitor (with Alarm Function) / Model Number M1849HM-4220K
Excellent visibility with large display Notifies ventilation timing with light and buzzer This product meets the conditions as a compliant item with the "Guidelines for the Selection of Carbon Dioxide Concentration Measuring Instruments" issued by the Ministry of Economy, Trade and Industry.
Air pollution can be understood through numerical values.
1. The operation buttons have been improved to be more visible and easier to operate than previous models. 2. Sensitivity has been significantly enhanced due to the high-sensitivity, light-scattering aggregation structure. 3. Equipped with a shoulder belt for easy carrying and simple operation for measurement. 4. Speed measurement that provides results in as little as 30 seconds. 5. Developed as a device for measurement verification, ensuring compatibility with configured devices. 6. Supports two power sources (AC adapter / AA batteries). 7. The measurement unit is equivalent to mg/m³, making it ideal for checking airborne dust levels.