Molded products Product List and Ranking from 108 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

Molded products Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

  1. 積水テクノ成型 営業統括本部　土木資材営業所 Tokyo//Building materials, supplies and fixtures manufacturers
  2. 東穂 Osaka//Building materials, supplies and fixtures manufacturers
  3. JSP 新事業開発本部 Tochigi//Building materials, supplies and fixtures manufacturers
  4. 4 三協化成 Toyama//Building materials, supplies and fixtures manufacturers
  5. 5 ナカ電子 Tokyo//others
Go to Company Ranking

Molded products Product ranking

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

  1. Crosswave Installation Procedures and Maintenance 積水テクノ成型 営業統括本部　土木資材営業所
  2. Plastic storage material "CW-HS (Cross Wave High Strong)" 積水テクノ成型 営業統括本部　土木資材営業所
  3. Foam-filled blow-molded product "FOAMCORE" JSP 新事業開発本部
  4. Optical ultra-low reflection material "Fine Shut Series" 光陽オリエントジャパン
  5. 5 Hard extruded cover for LED lighting, polycarbonate cover with excellent light diffusion properties. 東穂

Molded products Product List

91～120 item / All 240 items

Displayed results
[Information] Flow Adjustment Method in Extrusion Molds

[Information] Flow Adjustment Method in Extrusion Molds

Aren't you adjusting the flow rate by cutting the resin flow path yet? I will explain in detail how to adjust the resin flow rate balance.

In the case of problems in irregular extrusion, a wavering phenomenon may occur. Looking at the CAE analysis diagram, it can be seen that the flow rate of the resin in the wavering part is fast, and the amount of resin flowing is large, which indicates that this phenomenon occurs. One method to adjust the resin flow balance is to change the length of the resin flow path (by modifying the internal resin flow path of the mold) or to adjust the slit width of the mold. *For more details, please refer to the middle section of the page. Our company also offers extrusion mold design, prototype molding, and technical development tailored to customer requests, so please feel free to consult with us. 【Overview of Materials】 ■ Method of adjusting by changing the length of the resin flow path - Adjusting the length of the die land ■ Method of adjustment by changing the width (gap) of the slit - Adjusting the gap of the die land *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Extrusion molding technology "Hard 3-color resin extrusion molding" *Data being presented.

Extrusion molding technology "Hard 3-color resin extrusion molding" *Data being presented.

Utilizing different materials for the surface and base contributes to cost reduction. The use of soft resin also reduces the additional costs of tight materials.

Our company specializes in producing a single molded product using three types of resin materials through "hard three-color resin extrusion molding." We use a high-cost material with excellent design and weather resistance only for the surface layer, while a more economical material is used for the base, allowing for a selective use of materials. Additionally, it can be combined with soft resins, leading to reductions in material and assembly costs. 【Molding Example】 Surface Layer: 0.3mm thick wood grain hard PVC Base: Materials with secured physical properties or recycled materials Soft Part: Soft PVC is used to provide water and air tightness *For more details, please refer to the materials available for download in PDF format. Feel free to contact us with any inquiries.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Product Example] ASA with Rigid Wood Powder + Foamed ABS

[Product Example] ASA with Rigid Wood Powder + Foamed ABS

Excellent cost-effectiveness as there is no need for painting! It can be shaped into artificial wood that is close to natural wood.

Here is an example of "ASA with hard wood powder + foamed ABS." It excels in cost-effectiveness as there is no need for painting, and by mixing wood powder with resin, it is possible to mold artificial wood that is close to natural wood. Compared to natural wood, it is resistant to corrosion and has less deformation and discoloration. Our company supports various challenges in extrusion molding, from product planning to OEM and production transfer from other factories. Please feel free to contact us when needed. [Example] ■ Application: Resin profile ■ Material: ASA resin with wood powder, ABS resin ■ Precision: ±0.3 ■ Processing method: Extrusion molding, two-color molding *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Product Example] Soft TPO Wood Grain Two-Color Molding

[Product Example] Soft TPO Wood Grain Two-Color Molding

It takes into account the tactile feel and also reproduces the texture of the wood grain in its design!

Here is an example of "Soft TPO Wood Grain 2-Color Molding." It is used for pedestrian auxiliary handrails. By using elastomer resin, it considers the tactile feel and also reproduces the texture of wood grain in terms of design. Our company supports various extrusion molding challenges, from product planning to OEM and production transfer from other factories. Please contact us if you need assistance. [Example] ■ Application: Cover ■ Material: TPO・TPE ■ Precision: ±0.3 ■ Processing Method: Extrusion Molding 2-Color Molding *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Product Example] ASA with Rigid Wood Powder + Foamed ABS (Square Hole)

[Product Example] ASA with Rigid Wood Powder + Foamed ABS (Square Hole)

By mixing wood powder with resin, you can mold artificial wood that is close to natural wood!

Here is an example of "ASA with hard wood powder + foamed ABS (square hole)." Compared to natural wood, it is resistant to corrosion, has less deformation and discoloration, and by mixing wood powder with resin, it is possible to mold artificial wood that is close to natural wood. It is cost-effective as there is no need for painting. Our company supports various extrusion molding challenges, from product planning to OEM and production transfer from other factories. Please feel free to contact us when needed. 【Example】 ■ Application: Resin profile ■ Material: ASA resin with wood powder, ABS resin ■ Precision: ±0.3 ■ Processing method: Extrusion molding, two-color molding *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Product Example] Rigid Three-Color Molding with Wood Grain Finish

[Product Example] Rigid Three-Color Molding with Wood Grain Finish

This is an introduction to resin molded products that express a wood grain with excellent wood-like texture made from hard PVC and ASA resin, as well as hard and soft PVC!

Here is an example of "hard three-color molding with a wood grain finish." This is a resin molded product that expresses an excellent wood-like texture. It is a molding method used for resin inner frames and decking materials. Our company supports various challenges in extrusion molding, from product planning to OEM and production transfer from other factories. Please feel free to contact us when needed. 【Example】 ■ Application: Resin profile ■ Material: Rigid PVC, ASA resin, Rigid PVC, Flexible PVC ■ Precision: ±0.3 ■ Processing method: Extrusion molding, three-color molding *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Product Example] Rigid 3-Color Molding - Pink

[Product Example] Rigid 3-Color Molding - Pink

This is an introduction to hard three-color molding, where it is possible to add colors to resin, ranging from white and black to bold colors like pink!

Here is an example of "Hard 3-Color Molding Pink." By selecting materials, we can add color to the resin, ranging from white and black to bold colors like pink. Our company supports various challenges in extrusion molding, from product planning to OEM and production transfer from other factories. Please feel free to contact us when needed. 【Example】 ■ Application: Resin profile ■ Material: Rigid PVC, ASA resin, Rigid PVC, Flexible PVC ■ Precision: ±0.3 ■ Processing Method: Extrusion molding, 3-color molding *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Product Example] Rigid Two-Color Molding, Stone Texture, Black

[Product Example] Rigid Two-Color Molding, Stone Texture, Black

Used for flooring and flat moldings! The upper layer is stone-patterned ASA, and the lower layer is a rigid two-color molded PVC.

Here is an example of "Rigid Two-Color Molding Stone Pattern Black." This resin molded product closely resembles the texture of natural stone. It is used for flooring and flat moldings, featuring a top layer of stone-patterned ASA and a bottom layer of PVC, making it a rigid two-color molded product. Our company supports various extrusion molding challenges, from product planning to OEM and production transfer from other factories. Please feel free to contact us when needed. 【Example】 ■ Application: Cover ■ Material: ASA (stone-patterned material) PVC ■ Precision: ±0.3 *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Helpful website for extrusion molding: "Extrusion Molding Lab"

Helpful website for extrusion molding: "Extrusion Molding Lab"

Publication of VA/VE cost reduction examples, basic knowledge of extrusion molding, and our production achievements.

The "Extrusion Molding Lab" is a website that shares our company's expertise in resin molding, from mold design to product manufacturing, backed by extensive experience. It features a wealth of content, including cost reduction case studies through VA/VE, our production achievements, basic knowledge of extrusion molding, and videos of virtual factory tours. If you are looking for solutions to challenges in extrusion molding, such as quality improvement and cost reduction, please take a look. 【Highlights】 ■ Case studies of VA/VE cost reductions based on abundant practical examples and techniques ■ Clear introductions to our molding methods, technologies, and applications for our products ■ Videos of virtual factory tours and molding techniques are also available *We are currently offering a document that introduces some of the content from this website. Please check it out via "PDF Download."

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mall expansion prevention material "Indent Wire"

Mall expansion prevention material "Indent Wire"

Preventing mall and linear expansion and contraction due to the anchor effect of engraving! Compatible with various resins!

"Indent Wire" is a shrink prevention material (linear expansion prevention agent) for various automotive molds that can accommodate different types of resins. In conventional processes, equipment for applying and drying adhesives is required, which involves complicated work processes and raises environmental concerns due to the use of solvents. Indent Wire was developed to address these issues. Indent processing is uniformly applied to the surface and back of zinc-coated steel plates using engraved rolls. By inserting it into molten resin, the anchoring effect between the imprint and the molten resin ensures that this product adheres tightly to the extruded resin, preventing linear expansion and contraction of the mold. 【Features】 - Steel wire with uniform zinc coating and indent processing on soft steel wire - Prevents linear expansion and contraction of the mold through the anchoring effect with the imprint - Compatible with various types of resins - The linear expansion coefficient of the molded product becomes very close to that of steel - Environmentally friendly as it is adhesive-free *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mall expansion prevention material "Adcoat Wire"

Mall expansion prevention material "Adcoat Wire"

We have achieved a reduction in total costs! It is possible to make precision cuts during the extrusion molding process!

"Adcoat Wire" is a material suitable for preventing the expansion and contraction of various automotive moldings in the automotive field and window sash beads in the building materials field. Currently, it is common for irregularly shaped extrusions to require a significant number of sections. This product enables precision cutting during the extrusion process due to its anti-expansion properties, allowing for the omission of the annealing process and achieving a reduction in total costs. During the cooling process of extrusion molding, Adcoat Wire suppresses the expansion and contraction of the resin, preventing molding distortion. 【Features】 - Improves assembly compatibility by preventing the expansion of moldings. - Allows for precision cutting during the extrusion process. - Reduces restart time during the start of extrusion molding and in case of troubles. - Serves as an indicator for controlling variable extrusion molding. - Provides stability in molding due to its straightness, allowing for faster extrusion line speeds. *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Product Performance Introduction

Product Performance Introduction

This is an introduction to our product achievements, including packing materials, rubber molded products/processed items, and resin/plastic molded/processed items!

In terms of packing materials, we have achievements in rubber molded products such as "backup rings," "oil seals," and "O-rings," as well as "automotive bellows" and "shipping plugs." For plastic molded products, we have experience with "inspection jigs," "large covers," and "fans." Additionally, through extrusion molding, we can create cords and rings larger than the mold size. We have molds available based on cross-sectional shapes and dimensions, so please feel free to consult with us. 【Achievements】 ■ Packing materials ■ Rubber molded products/processed products ■ Resin/plastic molded/processed products ■ Others *For more details, please refer to the related links page or feel free to contact us.

  • Joining and fastening materials
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CP and CPK process capability

CP and CPK process capability

Explanation of the concepts and calculation methods for CP and CPK process capability.

Cp and Cpk are production management indicators that represent process capability, used when mass-producing in factories. By calculating Cp and Cpk, it is possible to identify previously unclear issues and areas for improvement in the manufacturing line. This article explains the overview of Cp and Cpk, their differences, calculation methods, and how to utilize and think about them. *For more details, please refer to the related link page or feel free to contact us.*

  • Joining and fastening materials
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder molding! High-density formation of metal, alloy, and ceramic powders without binders.

Powder molding! High-density formation of metal, alloy, and ceramic powders without binders.

[Limited to Ipros, free samples for the first 10 applicants] Achieving both "suppression of material degradation due to heat" and "high density" through instant binderless molding.

At Asahi Kasei Corporation, we utilize the explosive energy of explosives for the crimping and molding of dissimilar metals, as well as the production of metal components. By using the ultra-high pressure generated by the explosive energy of explosives, we can achieve binderless compression molding of metal, alloys, and ceramic powders. This allows for increased density and enhanced performance. Additionally, since the compression using this technology occurs instantaneously, the materials are not exposed to high temperatures for extended periods, making it particularly effective for materials that may degrade at high temperatures. 【Features】 - Achieves high density close to the true density of the material as no binder or insert agents are used. - Instantaneous compression eliminates prolonged thermal load, preventing material degradation due to heat. *These two points allow the inherent properties of the material to be manifested in the molded body. - The shape of the powder before compression is fundamentally irrelevant. (For shapes whose compressibility is uncertain, confirmation will be done through prototyping.) ★【First 10 applicants】 We will give away samples of compressed metal powder molding. If you are interested, please apply through "Contact Us." ★ For more details on what types of powders can be compressed, feel free to inquire.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"E-anchor," an end anchoring component for e-plate reinforcement.

"E-anchor," an end anchoring component for e-plate reinforcement.

Flat e-plate anchoring body with minimal interference for finishing - "e-anchor"

The e-anchor is a CFRP molded product that combines a plate part and a strand part using a unique molding technology, serving as a fixing body for the end anchoring of the e-plate method. By inserting the strand part into the concrete hole and adhering the plate part to the e-plate, the end anchoring of the e-plate is achieved. The strand part remains flexible until the curing of the adhesive resin, making it easy to adjust the angle during construction. Additionally, the e-anchor is only 3mm thick, allowing for a step height of about 10mm after installation. Compared to methods that mechanically anchor the ends using steel plates or bolts, it minimizes interference with the finishing. 【Features】 - The e-anchor has a small thickness and minimal interference with the finishing. - Being a highly durable CFRP molded product, it does not suffer from corrosion or similar issues. - It allows for easy angle adjustments during construction.

  • e-アンカー姿図.png
  • 定着イメージ.jpg
  • Renovation and repair methods
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulated Double Window "Rakumado II"

Insulated Double Window "Rakumado II"

Installation is possible with a projected dimension of 40mm! Lightweight and safe, easy-to-use insulated double windows.

"Rakusou II" is an easy-to-install, high-performance insulated double window. It can be installed with a projected dimension of 40mm, fitting neatly without protruding into the room, thanks to its space-saving design. It uses polycarbonate, which is about half the weight of glass but boasts approximately 200 times the strength, making it lightweight and very durable. In addition to the "Polycarbonate Type," we also offer the "Glass Type" and "Heat-Reflective Blind Set." 【Polycarbonate Type Features】 - Space-saving design that fits neatly without protruding into the room - Uses lightweight and durable polycarbonate for the shoji surface material - Boasts high insulation and heat-reflective effects, providing energy-saving benefits regardless of the season - Excellent soundproofing performance, especially at higher frequencies - Reduces the occurrence of unpleasant condensation, preventing the growth of mold and dust mites *For more details, please refer to the PDF materials or feel free to contact us.

  • Window and shutter openings
  • Heat insulation and heat shielding methods
  • Insulation work
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Health Insurance Association Comprehensive Information Processing System "KENPOS"

Health Insurance Association Comprehensive Information Processing System "KENPOS"

Smoothly handle various operations in health insurance associations! Achieve low-cost, simple, and comfortable operations!

"KENPOS" is a comprehensive system package designed to smoothly handle various operations within health insurance associations. Incorporating accumulated business know-how and numerous user requests, it is now offered as an evolved third-generation system. With a robust support system, we respond quickly to user requests. [Features] - Open system compatibility - Easy expandability - Comprehensive support system - System flexibility - Support for online billing *For more details, please refer to the PDF document or feel free to contact us.

  • Database
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Kyowa Corporation Business Introduction

Kyowa Corporation Business Introduction

Achieve a finished product functionality guarantee system! We can provide integrated production from mold to molding processing!

At Kyowa, we can provide total production from mold design to the manufacturing of injection-molded products and secondary processed products, assembly, and shipping. Leveraging the know-how we have cultivated over the long term in mold making, injection molding, secondary processing, and assembly, we respond to your diverse needs with a consistent production system, from assisting with prototypes and design to product assembly. Please feel free to contact us when you need our services. 【Features】 ■ Complete product functionality guarantee system ■ Capable of responding to a wide range of needs from small lot production to mass production orders ■ Able to handle small (18t) to large injection-molded products (850t) (in-house production) ■ Consistent production system from assisting with prototypes and design to product assembly *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
POM (Polyacetal) Extrusion Molding Long Length

POM (Polyacetal) Extrusion Molding Long Length

Long-length POM special extrusion with excellent flexibility, wear resistance, and chemical resistance ・Special extrusion molding ・Two-color extrusion molding (wear detection function) ・Up to 5 meters in length can be produced

POM (Polyacetal) It has low friction and excellent self-lubricating properties. It also has high wear resistance, protecting products from scratches and wear. It has high chemical resistance and can accommodate greases and lubricants. - High sliding - Wear resistance - Low water absorption - Oil resistance - Chemical resistance (except for acids) - Long lengths (MAX: 5m products) - Engineering plastic - Shape proposals - Hybrid molding proposals

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction to Acrylic Resin, Polycarbonate Resin, and PET Resin Molding Business

Introduction to Acrylic Resin, Polycarbonate Resin, and PET Resin Molding Business

We perform acrylic resin molding, polycarbonate resin molding, and PET resin molding.

Our company specializes in the molding of various resins, including acrylic resin (PMMA) and PET resin (PET). PMMA is a resin with excellent weather resistance, while PET excels in transparency and mechanical properties. We also handle the molding of polycarbonate resin (PC), which has outstanding impact resistance, and can mold complex shapes. *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sekisui Techno Molding Co., Ltd. Company Profile

Sekisui Techno Molding Co., Ltd. Company Profile

Creating products with an awareness of the trends of the times! We provide high-quality products through a consistent production process.

Since its establishment, Sekisui Techno Molding has primarily focused on injection molding and has supplied products to many industries, starting with the automotive sector. With excellent development and production capabilities in plastic molding, we respond to various needs. Through a consistent production process from design, mold making, molding, to processing, we provide high-quality products. We aim to evolve our core molding technology further and focus on the development of high-performance resin products, civil engineering materials, and environmentally friendly products, striving to be a company that contributes to society. 【Business Activities】 ■ Manufacturing and sales of plastic products *For more details, please refer to the PDF document or feel free to contact us.

  • container
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic injection molded products that enable mass production of high aspect ratio shapes.

Plastic injection molded products that enable mass production of high aspect ratio shapes.

Are you having trouble with fine shapes at a high aspect ratio? We can accommodate product formation and mass production even with steep gradients such as a height of 15μm, a slit width of 6μm, and a gradient of 2°.

The "Micro Order Injection Molding Products" from Sekisui Techno Molding achieve shapes with a few micrometers in order and high aspect ratios through injection molding. We welcome not only specific shape proposals but also requests such as "we want to impart this kind of performance." We provide one-stop support from prototyping to mass production, so please consult with us first. We can also accommodate large quantities of fine-shaped products with short lead times. 【Features】 ■ Achieves high aspect ratio shapes through injection molding ■ Capable of product formation even with steep gradients ■ High mass production capability using molds, allowing for quick turnaround on large lots We anticipate applications in the mobility and semiconductor fields, so please take a look at our PDF materials or feel free to contact us.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Weight reduction and cost reduction through the use of resin around automotive ECUs [ECM measures].

Weight reduction and cost reduction through the use of resin around automotive ECUs [ECM measures].

Currently, metal housings/cases are mainstream for vehicle-mounted ECUs. By changing this to resin, we achieve weight reduction and cost savings.

Vehicle-mounted ECUs typically use metal cases made of aluminum or copper. While metal shielding ensures robustness and excellent EMC measures, it poses significant challenges in terms of weight and cost. With the electrification of automobiles, the imperative to "lighten the vehicle body and extend the driving range" is unavoidable, leading to a high demand for weight reduction. Sekisui Techno Molding's approach allows for weight reduction by converting from metal to resin (approximately 45% lighter for the same shape). The freedom of shape offered by resin molding and the potential for cost reduction through mass production are also promising. While many resin products are inferior to metals in terms of heat dissipation and electromagnetic wave (noise) control, Sekisui Techno Molding's resin products ensure these functions. ■ Heat-conductive resin molded products (focused on heat dissipation) - Reduction of product temperature rise through heat diffusion - Weight reduction, increased design freedom, and mass production by replacing metal products ■ Heat dissipation and electromagnetic wave shielding resin molded products (balancing heat dissipation and electromagnetic wave shielding) - Reduction of product temperature rise through heat diffusion - Electromagnetic wave shielding performance through conductivity - Weight reduction, increased design freedom, and mass production by replacing metal products With Sekisui Techno Molding's comprehensive system, we consistently support our customers from planning and prototype development/verification to mass production and sales to realize their ideals.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-temperature insulating wool 3D molded product 'IBIWOOL-E'

High-temperature insulating wool 3D molded product 'IBIWOOL-E'

Adopted as replacement parts! Proposing enhanced competitiveness for customers with ultra-high temperature insulation measures.

"IBIWOOL-E" is a 3D molded product made of high-temperature insulating wool, allowing for the selection of insulation materials tailored to your usage temperature range. By combining materials, it achieves improved heat loss reduction and enhanced reliability through strength reinforcement. Based on your usage methods and requirements, we can propose suitable products. We can manufacture various shapes, making it suitable for use as replacement parts. 【Features】 ■ Compatible with a wide temperature range ■ Capable of integrated molding with metals ■ Increased freedom in product shapes ■ Extensive lineup *For more details, please refer to the PDF materials or feel free to contact us.

  • glass wool
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic molded products

Plastic molded products

Leave all your molding and processing needs to us! We will assist you with your ideas!

We offer one-stop plastic molding services. From the development stage to prototyping and mass production, we handle everything in-house. By using eco-friendly plastic (ECO PLASTIC) materials, we are also contributing to global warming countermeasures through CO2 reduction. We accommodate low costs, high quality, painting, texture processing, and specifications as requested. Please feel free to contact us for consultations. 【Features】 ■ We can handle everything from the development stage to prototyping and mass production. ■ We use eco-friendly plastic (ECO PLASTIC) materials. ■ We also produce waterproof cases. ■ Various standard products are available. ■ We accommodate low costs, high quality, painting, texture processing, and specifications as requested. *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Function checker and automatic adjustment device

Function checker and automatic adjustment device

Contract development of function checkers and automatic adjustment devices.

Our company manufactures inspection equipment for printed circuit boards implemented in products. We provide a comprehensive, custom-made development process that includes structural design, hardware design, software design, jig manufacturing, adjustments, and after-sales service for inspecting circuit boards. Additionally, we can customize the construction of a cloud system for storing traceability data of the inspected circuit boards according to your requirements. We manufacture various jigs that support inspections, including full (semi) auto function checkers and fully customized inspection machines. (Jig manufacturing partner: Shinon Instruments Co., Ltd.) ■ List of Control Equipment DC voltage and current power supplies, temperature and humidity meters, illuminance meters, luminance meters, Coriolis flow meters, digital panel meters, digital multimeters, optical power meters, stepping motors, high-precision shape measurement systems, ultra-fast inline profile measuring instruments, image processing systems, etc.

  • Other Software
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Please consult us for molded products for the automotive and home appliance industries, from single items to assembled products!

Please consult us for molded products for the automotive and home appliance industries, from single items to assembled products!

We accommodate various needs from prototyping to mass production with 43 molding machines ranging from 15 tons to 1,000 tons!

In Wuxi, China, Matex has been handling a large number of molded products for the automotive industry in recent years. Additionally, Wuxi Matex obtained IATF16949 certification in 2016, aiming to provide higher quality products. In particular, we have received high praise for our resin gears. ■ Basic Information Number of molding machines: 43 units Molding machine tonnage: 15 tons to 1,000 tons Products handled: Injection molded products (for the automotive and home appliance industries, among others) Electric actuators (for the home appliance industry, among others) Metal processed products Custom planetary gear reducers Number of employees: 210 Factory area: 16,500 square meters *For photos, materials, sizes, etc. of product examples, please download the "Molded Products PR Flyer" from the PDF below. *For more details about Matex China, please download the "Matex China Company Profile" from the PDF below.

  • others
  • Molded products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Molded products

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.