Metal fittings - メーカー・企業381社の製品一覧とランキング | イプロス

BCJ認定取得　グリップルレースウェイ支持金具

Powerful support with simple installation - Support brackets for H-shaped steel (heavy-duty type)

A powerful type has been added to the support fittings for H-shaped steel!

●BHIKH - Lower the hanging bolts for all equipment support! ●BHIKHR・BHIKHR2 - Ideal for supporting and stabilizing seismic frames and similar structures!

Reduce installation costs for hipped folded plate roof support brackets.

Introduction of support brackets for hase-style folded plate roofs!

- Can be used for both round and square hitches. - Can be temporarily fixed to the roof with one hand using the power of the spring. - Excellent workability as it can be installed by tightening from above. - Lightweight design that considers the load on the roofing material. - DSH545 has the optimal bolt length for mounting channels, allowing for the installation of solar modules as well as cable racks.

Reducing burdens such as on-site operations and cost management! High-efficiency "excess length processing fittings."

Construction time can be significantly shortened! Since there is only one component, the risk of component drop is reduced, and it can be installed anywhere without restrictions.

The excess length processing fitting "Rakumaki" is specifically designed for thin-diameter cables such as small core aerial optical cables, significantly reducing construction time from 30 minutes to 10 minutes. When coiling excess length with only drop cables, there was a risk of disconnection due to wind or vibrations, but by using the excess length processing fitting, it can be held in a stable condition, preventing disconnections. It does not take up space inside the gondola, improving workability, and can be installed even at a distance from the utility pole, eliminating obstacles to the climbing route. The compact design of the fitting also means there is no need to worry about contact with other lines. Additionally, compared to conventional products, costs can be reduced to about one-third to one-fourth. 【Features】 ■ Shortened construction time ■ Cost reduction achieved ■ Prevention of cable disconnections ■ Improved safety ■ Can be installed in various locations *For more details, please refer to the PDF document or feel free to contact us.

Coaxial cable fixing hardware/support rubber

Adopts black neoprene rubber with a hardness of 40°! It can be used for securing coaxial cables for digital radio.

The "coaxial cable fixing bracket/support rubber" is made of black neoprene rubber with a hardness of 40°. It can be used for fixing coaxial cables for digital wireless applications such as 260MHz and 900MHz (MCA). Please use it in combination with the support bracket. We also offer products for two cables. 【Lineup (excerpt)】 ■YM-9194 ■YM-9189 ■YM-9194-B ■YM-9162 ■YM-9194-A *For more details, please refer to the PDF document or feel free to contact us.

LED fluorescent light drop prevention fixture band type

This is a band-type fall prevention fixture that can be used for both LED and glass fluorescent tubes, and it is compatible with various types of lighting fixtures.

We use flame-retardant silicone rubber, so it will have a neat finish without interfering with the LED lighting. (Utility model registered)

Net hook 7 / Net hanging

"Easy to install" for the installation of safety nets at wooden construction sites.

It will be a [product for sale]. Net hook: Attach with two round wood screws (4.1x45), screw hole diameter is ф4.3. Please install within 1 meter. Net hanging: Hook onto the beam for installation. Please install within 1 meter. *For more details, please download the catalog or contact us. If you would like us to contact you or visit you, please feel free to reach out using the contact form below.

Plawan Rock

Securely fix two scaffolding boards at the same time! Setting up scaffolding for the standing seam roof walkway platform is easy.

"Prawan Rock" is a one-touch installation type fitting that can secure scaffolding boards and single-pipe scaffolding ladders without the need for wire. It makes the installation of scaffolding on corrugated roof passage frames easy. Meiji Shoko offers many new products and services born from the needs of the field. If you have any concerns or requests, please feel free to contact us, even for small matters. 【Features】 ■ One-touch installation type fitting ■ Scaffolding boards can be secured without wire ■ Easy installation of scaffolding on corrugated roof passage frames *For more details, please refer to the PDF materials or feel free to contact us. If you wish to receive communication or a visit from us, please feel free to reach out through the contact form below.

Ladder fixing hardware "Plawan Catcher"

Just drive in the wedge to complete the installation! It securely and quickly fixes the ladder and the single pipe.

The "Plawan Catcher" is a ladder fixing device that can securely and quickly fix ladders and single pipes. Installation is completed with just a single touch by driving in a wedge. At Meiji Shoko, we have many new products and services born from the demands of the field. If you have any concerns or requests, please feel free to contact us, no matter how small. 【Features】 ■ Can be securely fixed ■ Just drive in the wedge ■ Installation is completed with a single touch *For more details, please refer to the PDF materials or feel free to contact us. If you wish to receive communication or a visit from us, please feel free to reach out through the contact form below.

Sleeper movement prevention fittings for bridge sleepers and switch sleepers.

The pillow block anti-movement device contributes to the safe operation of trains with its excellent structure and characteristics!

The "rail sleeper movement prevention device" is installed on 4 to 8 sleepers before and after the rail joint, while the "switch device sleeper movement prevention device" is installed on the sleepers around the switch. This prevents the movement of sleepers by absorbing vibrations, shocks, and accelerations during train operation. It can be installed and connected regardless of the type of sleeper or if the spacing between sleepers is uneven. Made of rust-resistant and durable cast iron (FCD 450), it contributes to the stable operation of trains over the long term. For more details, please contact us or refer to the catalog.

Pillow block movement prevention hardware

Keep the state after adjusting the pillow support! Installation is possible even if the pillow spacing is uneven.

We offer "Sleeper Movement Prevention Brackets" that can be installed with just one box wrench without drilling holes in the sleepers. The "Bridge Sleeper Movement Prevention Bracket" is a lightweight type designed with portability in mind for use on bridges, and it has a structure that can withstand vibrations during train operation. It accommodates three sleeper heights: 130mm to 160mm, 170mm to 180mm, and 190mm to 260mm. Additionally, we also provide "PC Sleeper Movement Prevention Brackets" and "Switch Sleeper Movement Prevention Brackets." 【Features】 - Can be installed with just one box wrench without drilling holes in the sleepers - Can be installed even if the sleeper spacing is irregular *For more details, please download the PDF or feel free to contact us.

Cross pipe hanging bracket device

For track proximity construction wiring! It is possible to manage obstacles within the track collectively.

Our company offers the "Cross Pipe Suspension Fitting Device," which can be installed simultaneously during the burial of cross pipes, allowing for a reduction in construction time. This device securely connects and fixes the cross pipe to the sleeper, and it is compatible with cross pipes (VP pipes) with a nominal diameter of 300. It allows for the consolidated management of obstacles within the track during station improvement and subgrade improvement works. 【Features】 ■ Securely connects and fixes the cross pipe to the sleeper ■ A separate buckling prevention plate (sold separately) can be attached for fixing to maintain lateral resistance of the track bed ■ Can be installed simultaneously during the burial of cross pipes, enabling a reduction in construction time ■ Compatible with cross pipes (VP pipes) with a nominal diameter of 300 *For more details, please download the PDF or feel free to contact us.

[For Railways] Ultima Wire Lock (Stabilizing Wire)

For overhead line protection. A wire sway damper with over 1 million units shipped.

In the railway industry, overhead wire protection is essential for the safe retention of wires and related equipment. Damage to overhead wires caused by strong winds or vibrations can have serious impacts on train operations. The Ultima Wire Lock has a proven track record of over one million units shipped, addressing these challenges. It allows for easy attachment, detachment, and position adjustment of wires, providing reliable fixation to protect the overhead wires. 【Usage Scenarios】 - Stabilizing overhead wires, electric wires, and related equipment - Preventing damage from strong winds and vibrations - Improving maintenance efficiency 【Benefits of Implementation】 - Safe retention of overhead wires - Stabilization of operations - Reduction of maintenance costs

Mechanical joint disengagement prevention fitting "Kamik 90"

The horse and push bolt are made of corrosion-resistant alloy! They demonstrate a disengagement prevention performance of 3DkN or more!

"Kamik 90" is a disengagement prevention fitting for mechanical joints handled by Kurodaito. It exhibits a disengagement prevention performance of A grade, as defined in the technical standards (draft) for seismic joints of underground buried pipelines by the National Institute for Land and Infrastructure Management, with a performance of 3DkN or more. (D: nominal diameter) The contact ratio of the claw part of the fitting is over 90% with the outer circumference of ductile cast iron pipes, and it makes a soft touch with the ductile cast iron pipes, further reducing the impact on the mortar lining of the inner surface compared to conventional products (Kamik 80). The fitting and the pressing bolt are spherical, accommodating not only disengagement but also entry. [Features] ■ Exhibits disengagement prevention performance of 3DkN or more ■ Contact ratio of the fitting is over 90% ■ The fitting and pressing bolt are spherical, accommodating both disengagement and entry ■ The fitting and pressing bolt are made of corrosion-resistant alloy *For more details, please refer to the PDF document or feel free to contact us.

Faucet fittings

We provide various pipes primarily made of brass, including water faucet fittings and automotive parts, to our customers!

Our company provides various pipes primarily made of brass, including faucet fittings and automotive parts, to our customers. In addition to spouts used in kitchens, we continue to produce essential products for daily life, such as faucet pipes, towel racks for thermostats, pipes used in engine oil components, and handrails. [Features] - Spouts used in kitchens - Faucet pipes and towel racks for thermostats - Pipes used in engine oil components - Production of essential products for daily life, such as handrails *For more details, please refer to the PDF document or feel free to contact us.

Slido 'Magic' sliding door hardware with invisible rails

It's like magic! Hardware for sliding doors that makes the rails and frames invisible.

"Slido 'Magic'" is a sliding door hardware that realizes a sliding door without visible rails or frames. By housing the rail on the back side of the door, it ensures that the rail is not visible from the outside. The sleek design, unlike anything seen before, enhances the interior. 【Features】 - Mysterious movement created by a uniquely developed rail and roller - The rail, which is usually installed on the wall side, is embedded at the top of the door, moving along the roller fixed to the wall - The weight of the door is less than 80 kg per door For more details, please contact us.

Slide-type ladder "MWE Ladder System"

We offer a high-end German-made sliding ladder system made entirely of stainless steel!

The "MWE Sliding Ladder System" enables smooth movement to high storage spaces indoors, such as studies, wall bookcases, wall storage, wine cellars, lofts, libraries, and warehouses, and allows for sliding movement directly into corners. There is also a type that can slide into corners without removing the pulleys, and since the sizes are custom-made, it is possible to create a unique solution tailored to each location and purpose. The complex processes are finished with the quality control and meticulous handwork characteristic of Germany, resulting in a system with very high quality and functionality using advanced technology. 【Components of the Ladder System】 ■ System ■ Ladder Upper Shape ■ Tread ■ Ladder Base *For more details, please download the PDF or feel free to contact us.

High Transparency Sealing Material for Glass Partitions 'Tesa ACX Plus'

High transparency sealing material for glass partitions that enables high transparency adhesion to various substrates.

"TeSA ACX Plus" is a double-sided adhesive tape designed for glass partitioning that not only excels in functionality with excellent adhesion, durability, and workability but also features high transparency that brings a sense of unity between glass panels and a slim, clean finish in design. It enables high-transparent adhesion that makes the bonding area inconspicuous, particularly for materials requiring high transparency, such as glass, acrylic, and polycarbonate, as well as aluminum and various other substrates. 【Features】 ■ Immediate adhesion with no drying time required ■ Clean working environment ■ No overflow during pressing ■ Stability in adhesive thickness ■ Invisible bonding method ■ No special tools required *For more details, please download the PDF or feel free to contact us.

Vertical storage door hardware "Consepter III"

More space in the living room! Storage space quickly transforms into a home office or kitchen area.

The "Conceptor" is a vertical storage door hardware that allows you to store doors in the pocket section created in the cabinet. While it serves the purpose of hiding stored items, it also ensures workability in front of the cabinet, enabling a cabinet structure that does not require a bottom panel with large doors. Since a bottom panel is unnecessary, it is also recommended for storing wheeled suitcases, golf bags, heavy sports equipment, as well as household appliances and everyday items like washing machines and vacuum cleaners. 【Features】 ■ Excellent convenience ■ Ensures workability in front of the cabinet ■ Allows doors to be stored in the pocket section created in the cabinet ■ Maintains a neat appearance from floor to ceiling on the front surface ■ Enables a cabinet structure that does not require a bottom panel with large doors *For more details, please refer to the PDF document or feel free to contact us.

Subfloor installation support hardware "Subfloor One Shot"

Surprising construction efficiency! Just install it on plywood! Compatible with both wooden and stud framing!

The 'Substrate One Shot' is a construction auxiliary tool for installing substrate boards during wall and ceiling construction. The process that previously took a long time for installation is now significantly sped up. Leftover materials from the site can be used for the substrate boards, and the installation requires only the included nails or screws (except for Type C). The spare holes at both ends of the tool can be used for joints or reinforcements (only for Types A, B, and C). Additionally, the slim type for 12mm can be installed just like the conventional method and is fully compatible with 27mm thick studs, allowing for use in a wider range of environments. [Features] ■ For installing substrate boards during wall and ceiling construction ■ Installation time reduced to about one-tenth of the conventional method ■ Leftover materials from the site can be used for the substrate boards ■ Installation can be done with only the included nails or screws ■ Spare holes in the tool can be used for joints or reinforcements *For more details, please refer to the PDF document or feel free to contact us.

Kamoi Hiki Series

Firmly pull in pillars and other items! A rich lineup of fixed fittings!

The "Kamoihiki Series" is a hardware that connects columns and kamoi without any gaps. We offer a lineup tailored to different applications, including the "Kamoihiki Pulling Hardware N," which pulls the kamoi and column together; the "Kamoihiki Pulling Hardware S," which securely fixes the wood with a spring even as it shrinks; and the "Kamoihiki Fastening Hardware A," which embeds into the column for a secure hold. The material is iron, and the surface treatment is chromate. 【Lineup】 ■ Kamoihiki Pulling Hardware N ■ Kamoihiki Pulling Hardware S ■ Kamoihiki Fastening Hardware A *For more details, please refer to the PDF document or feel free to contact us.

Hanging bundle hardware "Kamoisage hardware T"

Smooth movement of sliding doors! A hanging support bracket for the second-floor beam that lowers due to natural load.

The "Kamoigai Raising Bracket T" is a bracket used to support the second-floor beam that sags due to natural loads and to prevent the kamoi from sagging. It consists of two brackets: Bracket A is installed on the lower side of the beam, and Bracket B is attached to the hanging post. The spring in Bracket B fixes the bracket again with the force of the spring when adjusting the sag of the second-floor beam with the bracket. Additionally, we offer "nails" that can be used for joining wood together. 【Features】 ■ Supports the second-floor beam that sags due to natural loads ■ Prevents the kamoi from sagging ■ Ensures smooth movement of sliding doors and similar items *For more details, please refer to the PDF document or feel free to contact us.